Search

Nano bacterial cellulose (NBC) being a biopolymer has unique physical and chemical properties with high biocompatibility. It is pure cellulose with nanometer size, produced by certain group of bacteria. Its properties can be further improved by combining with poly(vinyl alcohol) (PVA), which is a fascinating polymer soluble in water and biocompatible. Composite films of PVA and NBC were prepared by solution casting method. Composite films of PVA-NBC (0,1,2,3,4,5 %) were tested for major packaging properties like water vapor transmission rate, swelling measurement, film solubility and moisture retention capacity. Among all concentration films, film with 5 % NBC- PVA showed better results for all the tests. Films were also checked for antimicrobial properties against spoilage-causing bacteria and fungi. Further, the films were applied to study the shelf life in the Mitli Banana (Musa sp.) followed by Organoleptic evaluation during storage. Results showed that the banana packed with 5 % NBC- PVA film has retained maximum acceptable characters than other packages.

The limitations of the current vaccination strategy for the Kyasanur Forest Disease virus (KFDV) underscore the critical need for effective antiviral treatments, highlighting the crucial importance of exploring novel therapeutic approaches through in silico drug design. Kyasanur Forest Disease, caused by KFDV, is a tick-borne disease with a mortality of 3–5% and an annual incidence of 400 to 500 cases. In the early stage of infection, the envelope protein plays a crucial role by facilitating host–virus interactions. The objective of this research is to develop effective antivirals targeting the envelope protein to disrupt the virus–host interaction. In line with this, the 3D structure of the envelope protein was modeled and refined through molecular modeling techniques, and subsequently, ligands were designed via de novo design and pharmacophore screening, yielding 12 potential hits followed by ADMET analysis. The top five candidates underwent geometry optimization and molecular docking. Notably, compounds L4 (SA28) and L3 (CNP0247967) are predicted to have significant binding affinities of −8.91 and −7.58 kcal/mol, respectively, toward the envelope protein, based on computational models. Both compounds demonstrated stability during 200 ns molecular dynamics simulations, and the MM-GBSA binding free-energy values were −85.26 ± 4.63 kcal/mol and −66.60 ± 2.92 kcal/mol for the envelope protein L3 and L4 complexes, respectively. Based on the computational prediction, it is suggested that both compounds have potential as drug candidates for controlling host–virus interactions by targeting the envelope protein. Further validation through in-vitro assays would complement the findings of the present in silico investigations.

The demand for microbial pectinase has increased due to its vast applications in different industries. The current study dealt with the synthesis of pectinase by a novel native strain Aspergillus cervinus ARS2 using agro-industrial waste. Comparative studies conducted on pectinase production by submerged fermentation (SmF) and solid-state fermentation (SSF) showed that pectinase activity was more increased in SSF (44.51 ± 1.33 IU/mL) than in SmF (40.60 ± 1.15 IU/mL) when using orange peel as a substrate. Using SSF, one-factor-at-a-time (OFAT) studies were conducted, considering different process variables such as inoculum size, initial pH, incubation time, moisture content, incubation temperature, and substrate particle size, all of which affected the pectinase activity. OFAT results showed the highest pectinase activity at an inoculum size of 106 spores/mL (43.11 ± 1.06 U/mL), an incubation time of 6 days (43.81 ± 1.21 U/mL), a moisture content of 100% (44.30 ± 1.69 U/mL), a substrate particle size of 1.7 mm (42.06 ± 1.20 U/mL), an incubation temperature of 37 °C (45.90 ± 1.33 U/mL), and an initial pH of 4 (43.31 ± 0.89 U/mL). The identified significant process variables were then optimized by response surface methodology (RSM)-central composite design (CCD). The results showed optimum pectinase activity of 107.14 ± 0.71 IU/mL for a substrate particle size of 2 mm, an incubation temperature of 31.5 °C, an initial pH of 4.9, and a moisture content of 107%, which was obtained from the Minitab optimizer. By using statistical optimization, the pectinase production from the isolated novel fungal strain A. cervinus ARS2 was increased 2.38-fold. Therefore, the A. cervinus ARS2 strain can be further explored for large-scale pectinase production which could meet the growing industrial demands.

Polyelectrolyte complex membranes (PECMs) were prepared by combining sodium carboxymethyl cellulose (NaCMC) and gelatin (Ge) with variations in the Ge content in the NaCMC matrix. Characterization methods, such as infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), contact angle analysis (CA), and universal testing machines (UTM) were used to investigate the physicochemical studies of the prepared membranes. The pervaporation characteristics of membranes with Ge content were investigated using an azeotropic mixture of water and bioethanol. The obtained data revealed that the membrane with 15 mass% of Ge (M-3) showed a maximum flux of 7.8403 × 10−2 kg/m2·h with separation selectivity of 2917 at 30 °C. In particular, the total and water flux of PECMs are shown as very close to each other indicating that the fabricated membranes could be employed to successfully break the azeotropic point of water–bioethanol mixtures. Using temperature-dependent permeation and diffusion data, the Arrhenius activation parameters were calculated, and the obtained values of water permeation (Epw) were considerably smaller than bioethanol permeation (EpE). Developed membranes showed the positive heat of sorption (ΔHs), suggesting that Henry’s sorption mode is predominant.

Pectinolytic enzymes are related enzymes that hydrolyze pectic substances. Pectinolytic enzymes are of great interest in industrial applications for softening fruits, extracting and clarifying juices, extracting olive oil, retting textile fibers, preparing gel, and isolating protoplasts. The current work presents acidic extracellular pectinase production using low-cost agro-industrial waste with the indigenously isolated novel strain Aspergillus cervinus. Two fungal isolates, ARS2 and ARS8, with maximum pectinase activity, 41.88 ± 1.57 IU/mL and 39.27 ± 1.14 IU/mL, respectively, were screened out of 27 isolates from decayed fruit peels (orange, banana, and lemon) and soil containing decomposed vegetables. The isolate ARS2, identified as Aspergillus cervinus by molecular characterization, showed the highest pectinase activity of 43.05 ± 1.38IU/mL during screening and was further used for media component screening and optimization studies. To understand their effect on pectinase activity, one-factor-at-a-time (OFAT) studies were conducted on carbon sources, nitrogen sources, and mineral salts. The OFAT results showed the highest pectinase activity for orange peel (carbon source) at 44.51 ± 1.33 IU/mL, peptone (nitrogen source) at 45.05 ± 1.04 IU/mL, and NaH2PO4 (mineral salts) at 43.21 ± 1.12 IU/mL. The most significant media components screened by the Plackett–Burman (PB) design based on the p-value, Pareto chart, and main effect plot, were orange peel (p < 0.001), peptone (p < 0.001), NaH2PO4 (p < 0.001), and KH2PO4 (p < 0.001), which were further optimized using Response Surface Methodology (RSM) and Central Composite Design (CCD). The optimization results for the media components showed a maximum pectinase activity of 105.65 ± 0.31 IU/mL for 10.63 g orange peel, 3.96 g/L peptone, 2.07 g/L KH2PO4, and 2.10 g/L NaH2PO4. Thus, it was discovered that the indigenously isolated novel strain Aspergillus cervinus ARS2 was able to successfully produce a significant amount of pectinase using agro-industrial waste. Therefore, it can be considered for the large-scale optimized production of pectinase to meet industrial demands.

Zinc Oxide Nanoparticles (ZnONPs) are one of the most widely used metal oxide nanoparticles in biological applications because of their outstanding biocompatibility, affordability, and low toxicity. In biomedicine, ZnONPs have shown promise, particularly in the disciplines of anticancer and antibacterial fields. In comparison to other standard synthesis methods, the environmentally-friendly synthesis of metallic nanoparticles utilizing various plant extracts is a good option. The current research focuses on the synthesis of zinc oxide nanoparticles (ZnONPs) from R. sativus leaf extract under various physical conditions (Precipitation method). Analytical methods were used to confirm and characterize the produced ZnONPs. The spherical nature of the produced nanoparticles was established by SEM analysis. The generation of very pure ZnONPs was confirmed by EDS data. The crystalline nature of the produced nanoparticles, with a particle size of 66.47 nm, was confirmed by XRD. The XRD graphs’ presence of the (100), (002), and (101) planes strongly suggest the production of wurtzite ZnO. The visual and infrared area exhibits transmissions of 84 percent in the pH 10 nanoparticles. The band gap of the nanoparticles increases from 3.34 to 3.38 eV when the pH increases. These nanoparticles were effective against both Gram-positive and Gram-negative bacteria. The effect of several process parameters such as pH and temperature were investigated, and the best conditions were discovered to be pH 12 and 80 °C, respectively. The effect of ZnONPs was tested with human breast cancer cells (MCF-7), and they showed significant cytotoxic results. Collectively, our data suggest that ZnONPs of R. sativus leaf extract inhibit breast cancer cell lines. The ZnONPs are, therefore, a prospective source of chemopreventive drugs that merit additional exploration in order to uncover lead compounds with cancer chemotherapeutic potential.

Chitosan-capped silver nanoparticle (CS-capped AgNPs)-incorporated Poly(vinyl alcohol) (PVA) hybrid membranes were prepared by a solution-casting technique for ethanol dehydration via pervaporation. The incorporation of CS-capped AgNPs into the PVA membrane and its influence on membrane properties and pervaporation-separation process of azeotropic water/ethanol mixture was studied. The addition of CS-capped AgNPs into the PVA membrane reduced the crystallinity, thereby increasing the hydrophilicity and swelling degree of the hybrid membrane, supported by contact angle (CA) analyzer and swelling degree experiments, respectively. Fourier transform infrared spectroscopy (FTIR) demonstrated the formation of polymeric matrix between PVA and CS and also the binding of AgNPs onto the functional group of CS and PVA, which was also reflected in the microstructure images demonstrated by scanning electron microscopy (SEM) and by 2θ angle of wide-angle X-ray diffraction (WAXD). The effect of CS-capped AgNPs on the thermal stability of the hybrid membrane was demonstrated by differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). These characteristics of the hybrid membrane positively impact the efficiency of the dehydration of ethanol, as indicated by pervaporation experiments. The best performances in total flux (12.40 ± 0.20 × 10−2 kg/m2 h) and selectivity (3612.33 ± 6.03) at 30 °C were shown for CS-capped AgNPs PVA hybrid membrane containing 2 wt.% CS-capped AgNPs (M-4). This confirms that the developed hybrid membranes can be efficiently used to separate water from azeotropic aqueous ethanol.