Search

This paper investigates joint user pairing, power and time slot duration allocation in the uplink multiple-input single-output (MISO) multi-user cooperative rate-splitting multiple access (C-RSMA) networks in half-duplex (HD) mode. We assume two types of users: cell-center users (CCU) and cell-edge users (CEU); first, we propose a user pairing scheme utilizing a semi-orthogonal user selection (SUS) and a matching-game (MG)-based approach where the SUS algorithm is used to select CCU in each pair which assists in reducing inter-pair interference (IPI). Afterward, the CEU in each pair is selected by considering the highest channel gain between CCU and CEU. After pairing is performed, the communication takes place in two phases: in the first phase, in a given pair, CEUs broadcast their signal, which is received by the base station (BS) and CCUs. In the second phase, in a given pair, the CCU decodes the signal from its paired CEU, superimposes its own signal, and transmits it to the BS. We formulate a joint optimization problem in order to maximize the sum rate subject to the constraints of the power budget of the user equipment (UE) and Quality of Service (QoS) requirements at each UE. Since the formulated optimization problem is non-convex, we adopt a bi-level optimization to make the problem tractable. We decompose the original problem into two sub-problems: the user pairing sub-problem and the resource allocation sub-problem where user pairing sub-problem is independent of resource allocation sub-problem and once pairs are identified, resource allocation sub-problem is solved for a given pair. Resource allocation sub-problem is solved by invoking a successive convex approximation (SCA)-based approach. Simulation results demonstrate that the proposed SUS-MG-based algorithm with SCA outperforms other conventional schemes.

Although multi-access edge computing (MEC) has allowed for computation offloading at the network edge, weak wireless signals in the radio access network caused by obstacles and high network load are still preventing efficient edge computation offloading, especially for user requests with stringent latency and reliability requirements. Intelligent reflective surfaces (IRS) have recently emerged as a technology capable of enhancing the quality of the signals in the radio access network, where passive reflecting elements can be tuned to improve the uplink or downlink signals. Harnessing the IRS's potential in enhancing the performance of edge computation offloading, in this paper, we study the optimized use of a system of multi-IRS along with the design of the offloading (to an edge with multi MECs) and resource allocation parameters for the purpose of minimizing the devices' energy consumption considering 5G services with stringent latency and reliability requirements. After presenting our non-convex mathematical problem, we propose a suboptimal solution based on alternating optimization where we divide the problem into sub-problems which are then solved separately. Specifically, the offloading decision is solved through a matching game algorithm, and then the IRS phase shifts and resource allocation optimizations are solved in an alternating fashion using the Difference of Convex approach. The obtained results demonstrate the gains both in energy and network resources and highlight the IRS's influence on the design of the MEC parameters.

This paper presents a downlink reconfigurable intelligent surface (RIS)-assisted half-duplex (HD) cooperative rate splitting multiple access (C-RSMA) networks. The proposed system model is built up considering one base station (BS), one RIS, and two users. With the goal of minimizing the network energy consumption, a joint framework to optimize the precoding vectors at the BS, common stream split, relaying device transmit power, the time slot allocation, and the passive beamforming at the RIS subject to the power budget constraints at both the BS and the relaying node, the quality of service (QoS) constraints at both users, and common stream rate constraint is proposed. The formulated problem is a non-convex optimization problem due to the high coupling among the optimization variables. To tackle this challenge, an efficient algorithm is presented by invoking the alternating optimization technique, which decomposes the original problem into two sub-problems; namely, sub-problem-1 and sub-problem-2, which are alternatively solved. Specifically, sub-problem-1 is to jointly optimize the precoding vectors, common stream split, and relaying device power. Meanwhile, sub-problem-2 is to optimize the phase shift matrix at the RIS. In order to solve sub-problem-1, an efficient low-complexity solution based on the successive convex approximation (SCA) is proposed. Meanwhile, and with the aid of difference-of-convex rank-one representation and the SCA approach, an efficient solution for the phase shift matrix at the RIS is obtained. The simulation results demonstrate that the proposed RIS-assisted HD C-RSMA achieves a significant gain in minimizing the total energy consumption compared to the RIS-assisted RSMA scheme, RIS-assisted HD cooperative non-orthogonal multiple access (C-NOMA), RIS-assisted NOMA, HD C-RSMA without RIS, and HD C-NOMA without RIS.

With parallel and distributed computing (PDC) now wide-spread, modern computing programs must incorporate PDC within the curriculum. ACM and IEEE Computer Society's Computer Science curricular guidelines have recommended exposure to PDC concepts since 2013. More recently, a variety of initiatives have made PDC curricular content, lectures, and labs freely available for undergraduate computer science programs. Despite these efforts, progress in ensuring computer science students graduate with sufficient PDC exposure has been uneven. This paper discusses the impact of ABET's revised criteria that have required exposure to PDC to achieve accreditation for computer science programs since 2018. The authors reviewed 20 top ABET-accredited computer science programs and analyzed how they covered the required PDC components in their curricula. Using their own institutions as case studies, the authors examine in detail how three different ABET-accredited computer science programs covered PDC using different approaches, yet meeting the PDC requirements of these ABET criteria. The paper also shows how ACM/IEEE Computer Society curricular guidelines for computer engineering and software engineering programs, along with ABET accreditation criteria, can cover PDC.

Intelligent Transportation Systems are thriving thanks to a wide range of technological advances, namely 5G communications, Internet of Things, artificial intelligence and edge computing. Central to this is the wide deployment of smart sensing devices and accordingly the large amount of harvested information to be processed for timely decision making. Robust network access is, hence, essential for offloading the collected data before a set deadline, beyond which the data loses its value. In environments where direct communication can be impaired by, for instance, blockages such as in urban cities, unmanned aerial vehicles (UAVs) can be considered as an alternative for providing and enhancing connectivity, particularly when IoT devices (IoTD) are constrained with their resources. Also, to conserve energy, IoTDs are assumed to alternate between their active and passive modes. This paper, therefore, considers a time-constrained data gathering problem from a network of sensing devices and with assistance from a UAV. A Reconfigurable Intelligent Surface (RIS) is deployed to further improve both the connectivity and energy efficiency of the UAV, particularly when multiple devices are served concurrently and experience different channel impairments. This integrated problem brings challenges related to the configuration of the phase shift elements of the RIS, the scheduling of IoTDs transmissions as well as the trajectory of the UAV. First, the problem is formulated with the objective of maximizing the total number of served devices each during its activation period. Owing to its complexity and the incomplete knowledge about the environment, we leverage deep reinforcement learning in our solution; the UAV trajectory planning is modeled as a Markov Decision Process, and Proximal Policy Optimization is invoked to solve it. Next, the RIS configuration is then handled via Block Coordinate Descent.

Given its ability to control and manipulate wireless environments, reconfigurable intelligent surface (RIS), also known as intelligent reflecting surface (IRS), has emerged as a key enabler technology for the six-generation (6G) cellular networks. In the meantime, vehicular environment radio propagation is negatively influenced by a large set of objects that cause transmission distortion such as high buildings. Therefore, this work is devoted to explore the area of RIS technology integration with vehicular communications while considering the dynamic nature of such communication environment. Specifically, we provide a system model where RoadSide Unit (RSU) leverages RIS to provide indirect wireless transmissions to disconnected areas, known as dark zones. Dark zones are spots within RSU coverage where the communication links are blocked due to the existence of blockages. In details, a discrete RIS is utilized to provide communication links between the RSU and the vehicles passing through out-of-service zones. Therefore, the joint problem of RSU resource scheduling and RIS passive beamforming or phase-shift matrix is formulated as an optimization problem with the objective of maximizing the minimum average bit rate. The formulated problem is mixed integer non-convex program which is difficult to be solved and does not account for the uncertain dynamic environment in vehicular networks. Thereby, we resort to alternative methods based on Deep Reinforcement Learning to determine RSU wireless scheduling and Block Coordinate Descent (BCD) to solve for the phase-shift matrix, \textit{i.e.,} passive beamforming, of the RIS. The Markov Decision Process (MDP) is defined and the complexity of the solution approach is discussed. Our numerical results demonstrate the superiority of our proposed approach over baseline techniques.

We investigate the benefits of integrating unmanned aerial vehicles (UAVs) with reconfigurable intelligent surface (RIS) elements to passively relay information sampled by Internet of Things devices (IoTDs) to the base station (BS). In order to maintain the freshness of relayed information, an optimization problem with the objective of minimizing the expected sum Age-of-Information (AoI) is formulated to optimize the altitude of the UAV, the communication schedule, and phases-shift of RIS elements. In the absence of prior knowledge of the activation pattern of the IoTDs, proximal policy optimization algorithm is developed to solve this mixed-integer non-convex optimization problem. Numerical results show that our proposed algorithm outperforms all others in terms of AoI.

This paper investigates the performance of cooperative non-orthogonal multiple access (C-NOMA) in a cellular downlink system. The system model consists of a base station (BS) serving multiple users, where users with good channel quality can assist the transmissions between the BS and users with poor channel quality through either half-duplex (HD) or full-duplex (FD) device-to-device (D2D) communications. We formulate and solve a novel optimization problem that jointly determines the optimal D2D user pairing and the optimal power control scheme, where the objective is maximizing the achievable sum rate of the whole system while guaranteeing a certain quality of service (QoS) for all users. The formulated problem is a mixed-integer non-linear program (MINLP) which is generally NPhard. To overcome this issue, we reconstruct the original problem into a bi-level optimization problem that can be decomposed into two sub-problems to be solved independently. The outer problem is a linear assignment problem which can be efficiently handled by the well-known Hungarian method. The inner problem is still a non-convex optimization problem for which finding the optimal solution is challenging. However, we derive the optimal power control policies for both the HD and the FD schemes in closedform expressions, which makes the computational complexity of the inner problems polynomial for every possible pairing configurations. These findings solve ultimately the original MILNP in a timely manner that makes it suitable for real-time and low latency applications. Our simulation results show that the proposed framework outperforms a variety of proposed schemes in the literature and that it can obtain the optimal pairing and power control policies for a network with 100 users in a negligible computational time.

Unmanned aerial vehicles (UAVs) are being utilized for a wide spectrum of applications in wireless networks leading to attractive business opportunities. In the case of abrupt disruption to existing cellular network operation or infrastructure, e.g., due to an unexpected surge in user demand or a natural disaster, UAVs can be deployed to provide instant recovery via temporary wireless coverage in designated areas. A major challenge is to determine efficiently how many UAVs are needed and where to position them in a relatively large 3D search space. To this end, we formulate the problem of 3D deployment of a fleet of UAVs as a mixed integer linear program, and present a greedy approach that mimics the optimal behavior assuming a grid composed of a finite set of possible UAV locations. In addition, we propose and evaluate a novel low complexity algorithm for multiple UAV deployment in a continuous 3D space, based on an unsupervised learning technique that relies on the notion of electrostatics with repulsion and attraction forces. We present performance results for the proposed algorithm as a function of various system parameters and demonstrate its effectiveness compared to the close-to-optimal greedy approach and its superiority compared to recent related work from the literature.

With the current exponential growth in traffic and service demands, device-to-device (D2D) cooperation is identified as a major mechanism to enable 5G networks to effectively and efficiently augment network resources. The effectiveness of D2D cooperation depends on a wide range of decision making processes that include cluster formation, resource allocation, in addition to connection and mobility management. Irrespective of the D2D cooperation scenario whether in sensor, ad hoc, or cellular networks, the literature normally assumes that devices selected as relays or data sources are reliable; this means that they will maintain the connection till the communication session ends. Yet, this assumption is challenged in practice since devices' batteries can be depleted (e.g., sensors in an IoT network) and devices can move leading to connection termination (e.g., mobile users in a WiFi network or cars in a vehicular ad hoc network). To this end, we address the problem of reliable D2D cooperation in wireless networks by proposing a novel approach that is proactive by utilizing reliability metrics in the decision making process, and scalable by having low implementation complexity suitable for dense networks. These differentiating factors are shown to enhance the overall network reliability compared to standard techniques and to facilitate dynamic operation which is essential for practical implementation. Performance is evaluated using extensive simulations in addition to test bed experimental demonstration in order to quantify gains and extract insights on a range of existing design tradeoffs., Comment: --