Search

In this study, we evaluated the morphological behavior of polyurethane elastomers (PUEs) by modifying the soft segment chain length. This was achieved by increasing the soft segment molecular weight (Mn = 400–4000 gmol−1). In this regard, polycaprolactone diol (PCL) was selected as the soft segment, and 4,4′-cyclohexamethylene diisocyanate (H12MDI) and 1,6-hexanediol (HDO) were chosen as the hard segments. The films were prepared by curing polymer on Teflon surfaces. Fourier transform infrared spectroscopy (FTIR) was utilized for functional group identification in the prepared elastomers. FTIR peaks indicated the disappearance of −NCO and −OH groups and the formation of urethane (NHCOO) groups. The morphological behavior of the synthesized polymer samples was also elucidated using scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The AFM and SEM results indicated that the extent of microphase separation was enhanced by an increase in the molecular weight of PCL. The phase separation and degree of crystallinity of the soft and hard segments were described using X-ray diffraction (XRD). It was observed that the degree of crystallinity of the synthesized polymers increased with an increase in the soft segment's chain length. To evaluate hydrophilicity/hydrophobicity, the contact angle was measured. A gradual increase in the contact angle with distilled water and diiodomethane (38.6°–54.9°) test liquids was observed. Moreover, the decrease in surface energy (46.95–24.45 mN/m) was also found to be inconsistent by increasing the molecular weight of polyols. [ABSTRACT FROM AUTHOR]

A-π-D-π-A-based small molecules 6,6'-((thiophene-2,5-diylbis(ethyne-2,1-diyl))bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione) (TDPP-T) and 6,6'-(((2,3-dihydrothieno[3,4-b][1,4]dioxine-5,7-diyl)bis(ethyne-2,1-diyl))bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione) (TDPP-EDOT) have been designed and synthesized. The diketopyrrolopyrrole acts as an electron acceptor, while the thiophene or 3,4-ethylenedioxythiophene acts as an electron donor. The donor-acceptor groups are connected by an ethynyl bridge to further enhance the conjugation. The optoelectronics, electrochemical, and thermal properties have been investigated. Organic thin film transistor (OTFT) devices prepared from TDPP-T and TDPP-EDOT have shown p-type mobility. In as cast films, TDPP-T and TDPP-EDOT have shown a hole mobility of 5.44 × 10 -6 cm 2 V -1 s -1 and 4.13 × 10 -6 cm 2 V -1 s -1 , respectively. The increase in the mobility of TDPP-T and TDPP-EDOT OTFT devices was observed after annealing at 150 °C, after which the mobilities were 3.11 × 10 -4 cm 2 V -1 s -1 and 2.63 × 10 -4 cm 2 V -1 s -1 , respectively.

Due to their less expensive, environment friendly nature, and their natural abundance of cobalt have attained more significant attention for the synthesis of cobalt nanoparticles. In the present study, we report the facile synthesis of cobalt nanoparticles using a straight forward chemical reduction approach of cobalt chloride with sodium borohydride and capping of sulfadimidine. sulfadimidine has strong capping eligibility on the surface of nanoparticles due to its chemical stability and is an applicable as stabilizer due to the existence of an amine bond. The as-synthesized sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were characterized by using various spectroscopic and microscopic analysis like UV-Visible spectroscopy (UV-Vis), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), High-Resolution Transmission electron microscopy (HR-TEM), and Fourier-transform infrared spectroscopy (FT-IR). The XRD analysis exhibited the triclinic crystal structure of the as-synthesized cobalt nanoparticles and FT-IR analysis confirmed the capping of sulfadimidine via monodentate interaction. The HR-TEM analysis displayed the size of the cobalt nanoparticles approximately 3-5 nm. The antibacterial properties of the sulfadimidine stabilized cobalt nanoparticles (Co-SD NPs) were tested against various bacterial strains such as Klebsiella pneumonia (KP), Escherichia coli (EC) and Pseudomonas syringae (PS) by using agar disc diffusion approach. The results of sulfadimidine capped cobalt nanoparticles displayed the enhanced biological properties against the tested gram-negative bacteria., Competing Interests: The authors declare that they have no competing interests., (© 2021 The Author(s).)

Due to their inexpensive and eco-friendly nature, and existence of manganese in various oxidation states and their natural abundance have attained significant attention for the formation of Mn 3 O 4 nanoparticles (Mn 3 O 4 NPs). Herein, we report the preparation of Mn 3 O 4 nanoparticles using manganese nitrate as a precursor material by utilization of a precipitation technique. The as-prepared Mn 3 O 4 nanoparticles (Mn 3 O 4 NPs) were characterized by using X-ray powder diffraction (XRD), UV-Visible spectroscopy (UV-Vis), High-Resolution Transmission electron microscopy (HRTEM), Field emission scanning electron microscopy (FESEM), Thermal gravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FT-IR). The antimicrobial properties of the as-synthesized Mn 3 O 4 nanoparticles were investigated against numerous bacterial and fungal strains including  S. aureus, E. coli ,  B. subtilis, P. aeruginosa,   A. flavus and C. albicans . The Mn 3 O 4 NPs inhibited the growth of  S. aureus  with a minimum inhibitory concentration (MIC) of 40 μg/ml and C. albicans with a MIC of 15 μg/ml. Furthermore, the Mn 3 O 4 NPs anti-cancer activity was examined using MTT essay against A549 lung and MCF-7 breast cancer cell lines. The Mn 3 O 4 NPs revealed significant activity against the examined cancer cell lines A549 and MCF-7. The IC 50 values of Mn 3 O 4 NPs with A549 cell line was found at concentration of 98 µg/mL and MCF-7 cell line was found at concentration of 25 µg/mL., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2020 The Author(s).)