Search

Spatial heterogeneities in the chemical makeup of thin film photovoltaic devices are pivotal in determining device efficiency. We report the in-plane spatial distribution and degree of chlorine incorporation in organic–inorganic lead halide perovskite absorbers by means of nondestructive synchrotron-based nanoprobe X-ray fluorescence. The presence of chlorine is positively identified in CH3NH3PbI3 films synthesized with Cl-containing precursors and as an impurity in some films synthesized with nominally Cl-free precursors. The impurity may be introduced from precursors or as contaminants during film synthesis. The films formed from Cl-containing precursors contain roughly an order of magnitude higher amount of chlorine, with Cl:I values greater than 0.02 found whether Cl is present in either the organic or the inorganic precursor for both one- and two-step fabrication processes. A spatial variation in the Cl incorporation is observed within single particles and as well as between particles within a given ...

In this work we demonstrate the planar configuration on hole conductor (HTM) free perovskite based solar cells. The CH3NH3PbI3 perovskite was deposited using the spray technique to achieve micrometer size perovskite crystals. The number of spray passes changes the CH3NH3PbI3 film thickness; for example, 10 spray passes achieved a film thickness of 3.4 μm of perovskite. Surprisingly, power conversion efficiency of 6.9% was demonstrated for this novel, simple solar cell structure with thick perovskite film that has no HTM. Capacitance–voltage measurements reveal charge accumulation at the CH3NH3PbI3/Au interface while the compact TiO2/CH3NH3PbI3 junction showed a space charge region, which inhibits the recombination. Studying these interfaces is key to understanding the operation mechanism of this unique solar cell structure. This simple planar HTM free perovskite solar cell demonstrates the potential to make large-scale solar cells while maintaining a simple, low-cost architecture.

Organo-metal halide perovskites are composed of an ABX3 structure in which A represents a cation, B a divalent metal cation and X a halide. The organo-metal perovskite shows very good potential to be used as a light harvester in solar cells due to its direct band gap, large absorption coefficient, high carrier mobility and good stability. However, there is an important question in the photovoltaic field regarding the most advantageous architecture for perovskite based solar cells. Several studies showed sensitized perovskite solar cells achieving high performance, while high efficiency was also observed with the planar architecture. Consequently, it is still an open question regarding which operation mechanism and which architecture offers better results. This review describes both architectures, based on studies in the field. In the case of the sensitized structure, there are more difficulties in pore filling, naturally more recombination, and the possibility to use thicker metal oxide films. In the planar structure, thin metal oxide films are used, less recombination was observed and there are no infiltration problems. Both architectures exhibit long-range diffusion length and meet the demand for excellent coverage of the perovskite film.

Spatial heterogeneities in the chemical makeup of thin film photovoltaic devices are pivotal in determining device efficiency. In this study, the presence of chlorine is identified in perovskite films synthesized with Cl-containing precursors by means of nanoprobe X-ray fluorescence (Nano-XRF). Additionally, a spatial variation in the Cl incorporation is observed within a given film, and the standard deviation of Cl: I ratio across the film is large. Using Nano-XRF, the Cl incorporation in methylammonium lead iodide perovskite films can be manipulated by precursor stoichiometry ratio.

The inorganic-organic perovskite is currently attracting a lot of attention due to its use as a light harvester in solar cells. The large absorption coefficients, high carrier mobility and good stability of organo-lead halide perovskites present good potential for their use as light harvesters in mesoscopic heterojunction solar cells. This work concentrated on a unique property of the lead halide perovskite, its function simultaneously as a light harvester and a hole conductor in the solar cell. A two-step deposition technique was used to optimize the perovskite deposition and to enhance the solar cell efficiency. It was revealed that the photovoltaic performance of the hole conductor free perovskite solar cell is strongly dependent on the depletion layer width which was created at the TiO2-CH3NH3PbI3 junction. X-ray diffraction measurements indicate that there were no changes in the crystallographic structure of the CH3NH3PbI3 perovskite over time, which supports the high stability of these hole conductor free perovskite solar cells. Furthermore, the power conversion efficiency of the best cells reached 10.85% with a fill factor of 68%, a Voc of 0.84 V, and a Jsc of 19 mA cm(-2), the highest efficiency to date of a hole conductor free perovskite solar cell.