Search

Reversed-phase (RP) liquid chromatography is an important tool for the characterization of materials and products in the pharmaceutical industry. Method development is still challenging in this application space, particularly when dealing with closely-related compounds. Models of chromatographic selectivity are useful for predicting which columns out of the hundreds that are available are likely to have very similar, or different, selectivity for the application at hand. The hydrophobic subtraction model (HSM1) has been widely employed for this purpose; the column database for this model currently stands at 750 columns. In previous work we explored a refinement of the original HSM1 (HSM2) and found that increasing the size of the dataset used to train the model dramatically reduced the number of gross errors in predictions of selectivity made using the model. In this paper we describe further work in this direction (HSM3), this time based on a much larger solute set (1014 solute/stationary phase combinations) containing selectivities for compounds covering a broader range of physicochemical properties compared to HSM1. The molecular weight range was doubled, and the range of the logarithm of the octanol/water partition coefficients was increased slightly. The number of active pharmaceutical ingredients and related synthetic intermediates and impurities was increased from four to 28, and ten pairs of closely related structures (e.g., geometric and cis-/trans- isomers) were included. The HSM3 model is based on retention measurements for 75 compounds using 13 RP stationary phases and a mobile phase of 40/60 acetonitrile/25 mM ammonium formate buffer at pH 3.2. This data-driven model produced predictions of ln α (chromatographic selectivity using ethylbenzene as the reference compound) with average absolute errors of approximately 0.033, which corresponds to errors in α of about 3 %. In some cases, the prediction of the trans-/cis- selectivities for positional and geometric isomers was relatively accurate, and the driving forces for the observed selectivity could be inferred by examination of the relative magnitudes of the terms in the HSM3 model. For some geometric isomer pairs the interactions mainly responsible for the observed selectivities could not be rationalized due to large uncertainties for particular terms in the model. This suggests that more work is needed in the future to explore other HSM-type models and continue expanding the training dataset in order to continue improving the predictive accuracy of these models. Additionally, we release with this paper a much larger data set (43,329 total retention measurements) at multiple mobile phase compositions, to enable other researchers to pursue their own lines of inquiry related to RP selectivity., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Dwight R. Stoll reports equipment, drugs, or supplies were provided by Agilent Technologies Inc. Dwight R. Stoll reports financial support was provided by National Science Foundation. Other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Simulations were conducted to evaluate the potential of several hundred reversed-phase columns to separate small molecules. By calculating the retention factor of compounds in randomly generated virtual mixtures via the HSM (hydrophobic subtraction model) and applying basic chromatography theory, the simulation can estimate the retention time and peak width of every virtual compound and calculate the resolution between every adjacent pair of compounds. A preferred column set based on the number of successful separations of randomly generated virtual mixtures was developed. The tandem-column liquid chromatography (TC-LC) approach can separate 53.2 % of the 16-compound samples using 20 tandem-column pairs, while a single-column approach can only separate 42.6 % of the 16-compound samples with 20 single columns. The preferred set of columns obtained from the simulation was almost the same as the empirical set of columns previously obtained. In screening applications, TC-LC can achieve a comparably successful separation factor (selectivity) with a smaller column inventory (nine 50-mm columns) compared to the larger inventory needed by single-column LC (twenty-one 100-mm columns)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Trapping mode two-dimensional liquid chromatography (2D-LC) has recently found applications in pharmaceutical analysis to clean, refocus, and enrich analytes. Given its enrichment capability, 2D-LC with multiple trappings is appealing for low-level impurity monitoring that cannot be solved by single dimensional LC (1D-LC) or unenriched 2D-LC analysis. However, the quantitative features of multi-trapping 2D-LC remain largely unknown at impurity levels from parts-per-million (ppm) to 0.15% (w/w). We present a simple heart-cutting trapping mode 2D-LC workflow using only common components and software found in typical off-the-shelf 1D-LC instruments. This robust, turn-key system's quantitative capabilities were evaluated using a variety of standard markers, demonstrating linear enrichment for up to 20 trapping cycles and achieving a recovery of over 97.0%. Next, the trapping system was applied to several real-world low-level impurity pharmaceutical case studies including (1) the identification of two unknown impurities at sub-ppm levels resulting in material discoloration, (2) the discovery of a new impurity at 0.05% (w/w) co-eluted with a known impurity, making the undesired summation above the target specification, and (3) the quantification of a potential mutagenic impurity at 10-ppm level in a poorly soluble substrate. The recovery in all studies was better than 97.0% with RSD lower than 3.0%, demonstrating accuracy and precision of the 2D-LC trapping workflow. As no specialized equipment or software is required, we envision that the system could be used to develop low-impurity monitoring methods suitable for validation and potential execution in quality-control laboratories., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The liquid chromatography (LC) analysis of small molecule pharmaceutical compounds and related impurities is crucial in the development of new drug substances, but developing these separations is usually challenging due to analyte structural similarities. Tandem-column LC (TC-LC) has emerged as a powerful approach to achieve alternative separation selectivity compared to conventional single column separations. However, one of the bottlenecks associated with use of tandem column approaches is time-consuming column pair screening and selection. Herein, we compared critical resolution (R c ) in single column vs. TC-LC separations for a given set of small molecule pharmaceutical compounds and developed a column selection workflow that uses separation simulations based on parameters from the hydrophobic subtraction model (HSM) of reversed-phase selectivity. In this study, HSM solute parameters were experimentally determined for a small molecule pharmaceutical (Linrodostat) and ten of its related impurities using multiple linear regression of their retentions on 16 selected RPLC columns against in-house determined HSM column parameters. R c values were calculated based on HSM database column parameters for a pool of about 200 available stationary phases in both single-phase column (2.1 mm i.d. × 100 mm) or tandem column paired (two 2.1 mm i.d. × 50 mm) formats. Four column configurations (two single and two tandem) were predicted to achieve successful separations under isocratic HSM separation conditions, with a fifth tandem pair predicted to have a single co-elution. Of these five potential candidates, one tandem pair yielded compete baseline resolution of the 11-component mixture in an experimental separation. In this specific case, the tandem column pairs outperformed single-phase columns, with better predicted and experimental R c values for the Linrodostat mixture under the HSM separation conditions. The results reported in this study demonstrated the enormous selectivity potential of TC-LC in pharmaceutical compound separations and are consistent with our previous study that examined the potential of tandem column approaches using purely computational means, though there is room for substantial improvement in the prediction accuracy. The proposed workflow can be used to prioritize a small number of column combinations by computational means before any experiments are conducted. This is highly attractive from the point of view of time and resource savings considering over 200,000 different tandem column pairings are possible using columns for which there are data in the HSM database., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2023. Published by Elsevier B.V.)

A highly stereoselective synthesis of a cyclic dinucleotide (CDN) STING agonist containing two chiral thiophosphoramidate linkages is described. These rare yet key functional groups were, for the first time, installed efficiently and with high diastereoselectivity using a specially designed P(V) reagent. By utilizing this strategy, the CDN was prepared in greater than 16-fold higher yield than the prior P(III) approach, with fewer hazardous reagents and chromatographic purifications.

Monitoring polymerization events leading to the discovery of new high-molecular weight (MW) impurities is challenging during chemical syntheses of active pharmaceutical ingredients. Employing reversed-phase chromatography (RPC) stationary phases (SPs) in size-exclusion chromatography (SEC) mode could be a potential solution given their high efficiency, sensitivity, and extensive solvent compatibility. However, there is a lack of generalized means for trace polymeric impurities across a wide range of physicochemical properties. Herein, we developed a SEC-based approach with a C18 SP for screening such high-MW impurities. Seven polymer standards presenting a variety of functional groups, consisting of hydrophobic, heterocyclic, ionic, and neutral hydrophilic moieties, were utilized as model impurities to establish the screening conditions. Nine mobile phases (tetrahydrofuran-based, buffered methanol, and buffered acetonitrile) were proposed to cover all model polymers and a majority of potential high-MW impurities in small molecule chemical syntheses. The established screening system demonstrated a linearity of 0.05-1.0 % w/w (R 2 >0.99) for the selected model impurities with proper elution conditions. Two real high-MW impurities, BMT-041910 (polymeric degradation) and poly(phenyl thiirane) (by-product polymerization), were identified from the proposed high-MW impurity screening. The successful conditions yielded a quantitative limit better than 0.1 % w/w in both cases. We believe the developed screening platform is applicable to the analysis of a wide variety of unknown high-MW impurities of low abundance potentially generated during drug substance development., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

BMS-986142 has been developed as an innovative Bruton's tyrosine kinase inhibitor for treatment of several autoimmune diseases. The drug substance of BMS-986142 may contain three potential atropisomeric impurities due to its unique structural characteristics. Developing a single liquid chromatography (LC) method to separate all four highly structurally related atropisomers and other process impurities from each other turned out to be a daunting task. Two-dimensional LC (2DLC) was found to be an extremely powerful enabling technology for extracting purity information out of the complex sample impurity profile and facilitated process development before a final single dimension method was discovered. The off-the-shelf 2DLC instrument could be configured to allow injection of the targeted first dimension peak through either no-loss multiple heart-cutting fractions or as a large, single volume fraction with on-line dilution. Excellent precision (relative standard deviation of 0.3 %) and recovery (101.2 ± 0.2 %) was achieved for an atropisomer impurity at a 10 % monitoring level in the first configuration with sensitivity down to 0.2 % w/w. With the second instrument configuration, which eliminated the need for fraction recombination, similar figures of merit were maintained for the second dimension at the cost of losing the ability to collect and park multiple fractions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A rapid HILIC-MS method was developed for measuring the genotoxic impurities aziridine and 2-chloroethylamine. Sample preparation was simple and direct without requiring derivatization. Paired with a 1.5 min isocratic UHPLC separation, sample analysis could be completed in less than 5 min. Linearity was established from 0.5 μg/L to 10 μg/L for both target analytes. For main components at 100 g/L, this equates to 5 parts per billion (ppb) detectability using a benchtop, single quadrupole detector. Three model matrices were evaluated (glycine, phenylalanine, and the pharmaceutical drug asunaprevir), and the method was able to provide suitable repeatability (<10% RSD) and accuracy (±10%) at 5 μg/L concentrations. •Direct sample preparation without derivatization as is needed for GC analyses•Less than 5 min required for sample preparation and HILIC-MS analysis•Part per billion sensitivity in multiple test matrices with good recovery., (© 2019 The Author.)

The ability to tune chiral selectivity through mobile phase modifiers is a powerful tool in chiral separations. Beyond improving efficiency and/or resolution, some mobile phase systems can even invert elution order, a highly desirable result for trace analyses or preparative scale isolations. Previous work has demonstrated that acidic modifiers, such as ethanesulfonic acid (ESA), can greatly impact separations of enantiomers. However, prior studies were primarily performed on coated chiral stationary phases (CSPs), which limited the selection of the bulk mobile phase component. In this work, the effect of ESA modifier was studied for the enantioseparation of six pairs of amino acid esters on a CHIRALPAK ® IA column, an immobilized amylose-based CSP, with different combinations of standard solvents (hexane and ethanol) as well as "non-standard" solvents, such as methyl t-butyl ether, ethyl acetate, tetrahydrofuran, acetone, or 1,4-dioxane. ESA generally improved selectivity, and multiple instances of elution order reversal were observed. A Van Deemter plot study reveals that ESA exerts its effect by pulling the enantiomer deeper into the chiral cavity of the chiral polymer to increase the interactions between the analytes and the stationary phase, which is the main reason for the increased enantioselectivity., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Pharmaceutical formulations containing multiple active components challenge the development of analytical methods, especially as the individual active ingredients diverge in their physicochemical properties. Establishing specificity, especially peak purity, is one of the major evaluation criteria when developing a related substances method for drug substances or products. Fixed-dose combination products may not be amenable to common strategies for assessing peak purity, such as performing orthogonal separations, due to the complexity of the separation and/or diversity of the active ingredients. An alternate approach to evaluating peak purity is demonstrated for a triple-active component fixed-dose combination product under development. A commercially available automated two-dimensional liquid chromatography system was used to perform a selective comprehensive multidimensional separation of an active ingredient peak. The first dimension performed the drug product impurity/degradant profiling method; the second dimension assayed these fractions using the drug substance profiling method, which was pseudo-orthogonal to the first dimension. A total of 14 targeted fractions were sampled across the first dimension main peak, with 11 containing detectable analytes and the remaining fractions bracketing the main peak. This degree of sampling allowed profiling of a coeluting degradant present at a 0.2% w/w level throughout the main peak., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A rapid microfluidic based capillary electrophoresis immunoassay (CEIA) was developed for on-line monitoring of glucagon secretion from pancreatic islets of Langerhans. In the device, a cell chamber containing living islets was perfused with buffers containing either high or low glucose concentration. Perfusate was continuously sampled by electroosmosis through a separate channel on the chip. The perfusate was mixed on-line with fluorescein isothiocyanate-labeled glucagon (FITC-glucagon) and monoclonal anti-glucagon antibody. To minimize sample dilution, the on-chip mixing ratio of sampled perfusate to reagents was maximized by allowing reagents to only be added by diffusion. Every 6 s, the reaction mixture was injected onto a 1.5-cm separation channel where free FITC-glucagon and the FITC-glucagon-antibody complex were separated under an electric field of 700 V cm(-1). The immunoassay had a detection limit of 1 nM. Groups of islets were quantitatively monitored for changes in glucagon secretion as the glucose concentration was decreased from 15 to 1 mM in the perfusate revealing a pulse of glucagon secretion during a step change. The highly automated system should be enable studies of the regulation of glucagon and its potential role in diabetes and obesity. The method also further demonstrates the potential of rapid CEIA on microfluidic systems for monitoring cellular function.

Introduction: Planaria present a unique model organism for studying primitive central nervous systems. The major mammalian excitatory neurotransmitters, glutamate and aspartate, have previously been measured in planaria via high pressure liquid chromatography (HPLC). A faster extraction and analysis procedure using capillary electrophoresis (CE) was developed which confirms the presence of these amino acids in single planaria homogenates., Method: Following homogenization and centrifugation of individual planaria in hydrochloric acid/acetonitrile, glutamate and aspartate were derivatized with naphthalene-2, 3-dicarboxaldehyde (NDA). The labeled amino acids were measured using capillary electrophoresis with laser-induced fluorescence (CE-LIF)., Results: CE-LIF electropherograms were generated in less than 1 min. The mean ± S.D. amounts of glutamate and aspartate were 1200 ± 500 and 1900 ± 700 pmol/mg-planarian (n=22), respectively. Spiked average recoveries of glutamate and aspartate were 96% and 91%, respectively., Discussion: The high-throughput method provides the ability to quantitate changes in excitatory neurotransmitters under developmental or stimulatory conditions. The capability to monitor multiple neurotransmitter levels offers the opportunity to correlate behavioral responses with biochemical changes in planaria., (Copyright © 2010 Elsevier Inc. All rights reserved.)

A new method is described for two-dimensional (2D) separations using a microfluidic chip normally employed for single dimension electrophoresis. The method employs a combination of gradient elution moving boundary electrophoresis (GEMBE) and chiral capillary zone electrophoresis (CZE). The simplicity of the first dimension GEMBE method enables its implementation in the injection channel of a conventional electrophoresis chip, simplifying the design and operation of the device. The method was used for high resolution 2D chiral separations of a mixture of amino acids considered as possible signatures of extant or extinct life for solar system exploration. The enantiomers of aspartic acid, glutamic acid, serine, alanine, and valine were all resolved as well as glycine (achiral) and several unidentified impurities, giving an estimated peak capacity of 35 for the region between valine and glycine. The results highlight the need for high peak capacity separations for chiral amino acid analysis if accurate enantiomeric ratios are to be determined.

A sensitive method was developed for the determination of the major inorganic ions in commercial mineral waters using gradient elution moving boundary electrophoresis with capacitively coupled contactless conductivity detection. This application was the first to demonstrate the separation of cations and anions simultaneously using gradient elution moving boundary electrophoresis. Seven ionic analytes (calcium, chloride, magnesium, nitrate, potassium, sodium, and sulfate) were separated in less than 7 min with detection values in the low μmol/L to sub-μmol/L range. Calculated values of the major ions in three commercial mineral waters were compared to reported values with good correlation. In another application, phosphate and arsenate were separated in less than 2 min with limits of detection of 300 and 140 nmol/L, respectively. For all standard analyses, the RSD for migration times and peak areas were under 3%.

CE has evolved as one of the most efficient separation techniques for a wide range of analytes, from small molecules to large proteins. Modern microdevices facilitate integration of multiple sample-handling steps, from preparation to separation and detection, and often rely on CE for separations. However, CE frequently requires complex geometries for performing sample injections and maintaining zone profiles across long separation lengths in microdevices. Two novel methods for performing electrophoretic separations, gradient elution moving boundary electrophoresis (GEMBE) and gradient elution isotachophoresis (GEITP), have been developed to simplify microcolumn operations. Both techniques use variable hydrodynamic counterflow and continuous sample injection to perform analyses in short, simple microcolumns. These properties result in instruments and microdevices that have minimal 'real-world' interfaces and reduced footprints. Additionally, GEITP is a rapid enrichment technique that addresses sensitivity issues in CE and microchips.

In this work, gradient elution isotachophoresis was combined with capillary zone electrophoresis (GEITP-CZE) in a single microcolumn. The multistage approach addresses the issues of analyte resolution difficulties in GEITP, as well as poor concentration sensitivity in CZE. GEITP employs rapid electrophoretic focusing at a discontinuous ionic interface within a sample well generated through combined electroosmotic and hydrodynamic flows. The interface and enriched analytes are then pulled into a capillary or microchannel as the counter-flow is reduced for on-column detection. To transform GEITP-focused samples to CZE-based separation, the sample solution is replaced with CZE buffer solution while maintaining hydrodynamic flow to ensure migration toward the detector. The single solution switch and lack of polarity inversion allows for reproducible separations (typically <6% relative standard deviation in peak heights and <0.5% in migration times). Low-pressure hydrodynamic flow during CZE allowed for flexible resolution adjustment, with a linear increase versus the square root of migration time, without altering the separation column, field strength, or electrolyte system. As a first demonstration of the applicability of GEITP-CZE, a series of amino acids to be assayed for in future Mars exploration missions as indicators of biological life were studied. Separation of six amino acids, with limits of detection as low as 200 fM, were achieved using a capillary format with a total analysis time of 11 min. A glass-based microfluidic implementation is also demonstrated that can perform GEITP-CZE in 1 cm effective lengths.

This work demonstrates coupling of the newly described electrophoretic enrichment technique of gradient elution isotachophoresis (GEITP) to a low-cost, conventional ultraviolet absorbance detector to realize sensitive measurements with a universal detector, eliminating the need for fluorescent analytes or derivatization. The effects of various parameters on enrichment were studied, including current density varied by leading electrolyte concentration, current density varied by applied electric field, and counter-flow acceleration across varying capillary inner diameters. Optimized parameters were applied to the enrichment and separation of the amino acids tryptophan (Trp) and tyrosine (Tyr). Limits of detection for Trp and Tyr were 51 and 215 nM, respectively, reflecting sensitivity enhancements of 860- and 1900-fold. Analysis times were less than 6 min, and peak height RSDs were less than 4%. A demonstration of enrichment and separation of these amino acids from artificial cerebrospinal fluid is additionally shown as a first step to realizing biochemical monitoring by GEITP.

Temperature gradient focusing (TGF) is a new and promising equilibrium gradient focusing method which can provide high concentration factors for improved detection limits in combination with high-resolution separation. In this technique, temperature-dependent buffer chemistry is employed to generate a gradient in the analyte electrophoretic velocity. By the application of a convective counter-flow, a zero-velocity point is created within a microchannel, at which location the ionic analytes accumulate or focus. In general, the analyte concentration is small when compared with buffer ion concentrations, such that the focusing mechanism works in the ideal, linearized regime. However, this presumption may at times be violated due to significant sample concentration growth or the use of a low-concentration buffer. Under these situations the sample concentration becomes non-negligible and can induce strong nonlinear interactions with buffer ions, which eventually lead to peak shifting and distortion, and the loss of detectability and resolution. In this work we combine theory, simulation, and experimental data to present a detailed study on nonlinear sample-buffer interactions in TGF. One of the key results is the derivation of a generalized Kohlrausch regulating function (KRF) that is valid for systems in which the electrophoretic mobilities are not constant but vary spatially. This generalized KRF greatly facilitates analysis, allowing reduction of the problem to a single equation describing sample concentration evolution, and is applicable to other problems with heterogeneous electrophoretic mobilities. Using this sample evolution equation we have derived an understanding of the nonlinear peak deformation phenomenon observed experimentally in TGF. We have used numerical simulations to validate our theory and to quantitatively predict TGF. Our simulation results demonstrate excellent agreement with experimental data, and also indicate that the proper inclusion of Taylor dispersion is important for the accurate modeling of TGF. This work is an important first step towards the understanding and prediction of the more complex, nonlinear, and multi-species interactions which often occur in on-chip electrophoretic assays such as TGF.

A novel format for performing capillary isotachophoresis (ITP) is described -- gradient elution ITP (GEITP). GEITP merges the recently described electrophoretic separation technique of gradient elution moving boundary electrophoresis (GEMBE) with an ITP enrichment step. GEMBE utilizes a combination of continuous sample injection with a pressure-controlled counterflow; as the counterflow is reduced, analytes are sequentially eluted onto the separation column and detected as boundary interfaces. By incorporating leading electrolytes into the counterflow and terminating electrolytes into the sample matrix, an ionic interface can be formed near the capillary inlet. The discontinuous buffer system forms highly enriched analyte zones outside of the capillary, which are then eluted onto the separation capillary as the counterflow is reduced. Separation of fluorescent analytes was achieved either through discrete electrolyte spacers added to the sample or by using ampholyte mixtures to form a continuum of spacers. As the ITP process occurs off-column, extremely short length separations can be achieved, as demonstrated by a separation in 30 microm. The effects of various parameters on the GEITP enrichment process are investigated, including initial counterflow rates, electric field, leading electrolyte concentration, and counterflow acceleration, which is an adjustable parameter allowing for highly flexible separations. Typical enhancements in limits of detection and sensitivity were greater than 10,000-fold and were achieved in less than 2 min, yielding low-picomolar detection limits using arc lamp illumination and low-cost CCD detection. An optimized system afforded greater than 100,000-fold improvement in detection of carboxyfluorescein in 8 min. Specific examples of enrichment and separation demonstrated include the following: small dye molecules, DNA, amino acid mixtures, and protein mixtures.

We describe the serial combination of temperature gradient focusing (TGF) and field-amplified continuous sample injection (FACSI) for improved analyte enrichment and electrophoretic separation. TGF is a counterflow equilibrium gradient method for the simultaneous concentration and separation of analytes. When TGF is implemented with a low conductivity sample buffer and a (relatively) high conductivity separation buffer, a form of sample enrichment similar to field-amplified sample stacking (FASS) or field-amplified sample injection (FASI) is achieved in addition to the normal TGF sample enrichment. FACSI-TGF differs from FASI in two important respects: continuous sample injection, versus a discrete injection, is utilized; because of the counterflow employed for TGF, the stacking interface exists in a pseudo-stationary region outside of the separation column. Notably, analyte concentration enrichment factors greater than the ratio of separation and sample conductivities (gamma) were achieved in this method. For gamma=6.1, the concentration factor for one model analyte (Oregon Green 488) was found to be 36-fold higher with FACSI-TGF as compared to TGF without FACSI. A separation of five fluorescently labeled amino acids is also demonstrated with the technique, yielding an average enrichment of greater than 1000-fold.

Counter-flow gradient electrofocusing techniques are methods whereby a combination of electrophoresis and a bulk solution counter-flow is used to accumulate or focus analytes at stationary points along a separation column. This review first describes the various forms of counter-flow gradient electrofocusing that have been demonstrated in the literature and then compares figures of merit for counter-flow focusing methods and conventional CE methods. In an effort to compare the concentration enhancement of the various focusing techniques against each other, as well as of stacking methods, the parameter of analyte-accumulation velocity is introduced and employed to normalize the efficacy of the techniques.

A novel method for performing electrophoretic separations is described-gradient elution moving boundary electrophoresis (GEMBE). The technique utilizes the electrophoretic migration of chemical species in combination with variable hydrodynamic bulk counterflow of the solution through a separation capillary or microfluidic channel. Continuous sample introduction is used, eliminating the need for a sample injection mechanism. Only analytes with an electrophoretic velocity greater than the counterflow velocity enter the separation channel. The counterflow velocity is varied over time so that each analyte is brought into the separation column at different times, allowing for high-resolution separations in very short channels. The new variable of bulk flow acceleration affords a new selectivity parameter to electrophoresis analogous to gradient elution compositions in chromatography. Because it does not require extra channels or access ports to form an injection zone and because separations can be performed in very short channels, GEMBE separations can be implemented in much smaller areas on a micro-fluidic chip as compared to conventional capillary electrophoresis. Demonstrations of GEMBE separations of small dye molecules, amino acids, DNA, and immunoassay products are presented. A low-cost, polymeric, eight-channel multiplexed microfluidic device was fabricated to demonstrate the reduced area requirements of GEMBE; the device was less than 1 in.2 in area and required only n + 1 fluidic access ports per n analyses (in this instance, nine ports for eight analyses). Parallel separations of fluorescein and carboxyfluorescein yielded less than 3% relative standard deviation (RSD) in interchannel migration times and less than 5% RSD in both peak and height measurements. The device was also used to generate a calibration curve for a homogeneous insulin immunoassay using each of the eight channels as a calibration point with less than 5% RSD at each point with replicate analyses.

Temperature gradient focusing (TGF) has previously been shown to be a practical technique for simultaneous concentration and separation of a variety of samples. In this paper, we demonstrate that TGF can be conducted at a wide range of pH values. Techniques for first-order prediction of the suitability of a given BGE for focusing are discussed. Buffer suitability for TGF is assessed experimentally by simultaneously concentrating and separating a pair of fluorescent analytes. One analyte is held at constant concentration for use as an internal standard while the concentration of the other dye is varied. Peak area is shown to vary linearly with the input dye concentration. A high degree of resolution (R(s) >3) of fluorescein and carboxyfluorescein, as well as for two LysoSensor-based dyes, is also observed. Foucusing and separation by TGF was successfully conducted quantitatively in BGE solutions of pH from 3.0 to 10.5.

An appropriate beta cell mass is pivotal for the maintenance of glucose homeostasis. Both insulin and IGF-1 are important in regulation of beta cell growth and function (reviewed in ref. 2). To define the roles of these hormones directly, we created a mouse model lacking functional receptors for both insulin and IGF-1 only in beta cells (betaDKO), as the hormones have overlapping mechanisms of action and activate common downstream proteins. Notably, betaDKO mice were born with a normal complement of islet cells, but 3 weeks after birth, they developed diabetes, in contrast to mild phenotypes observed in single mutants. Normoglycemic 2-week-old betaDKO mice manifest reduced beta cell mass, reduced expression of phosphorylated Akt and the transcription factor MafA, increased apoptosis in islets and severely compromised beta cell function. Analyses of compound knockouts showed a dominant role for insulin signaling in regulating beta cell mass. Together, these data provide compelling genetic evidence that insulin and IGF-I-dependent pathways are not critical for development of beta cells but that a loss of action of these hormones in beta cells leads to diabetes. We propose that therapeutic improvement of insulin and IGF-I signaling in beta cells might protect against type 2 diabetes.

Capillary electrophoresis (CE) was coupled to negative mode electrospray ionisation-mass spectrometry (MS) for separation and detection of phosphorylated and acidic metabolites in extracts of prokaryotes. Unlike previous CE-MS systems for metabolite analysis, a sheathless interface was used to improve sensitivity. To accomplish this, the separation capillary was modified by creating a porous junction near the outlet where the electrospray voltage and cathodic voltage for CE were applied. The outlet of the capillary was pulled to a 5 microm inner diameter to form an electrospray emitter and had a frit fabricated near the exit to prevent clogging. During analysis pressure was applied at the inlet of the separation column to create sufficient flow towards the detector. Limits of detection for 19 metabolites in full scan mode ranged from 20 nM for ADP ribose to 2.5 microM for alpha-ketoglutarate for 40 nL injections. Extracts of Escherichia coli, strain DH5-alpha, were analyzed using this system. In full scan mode, 118 different metabolites were detected. Tandem mass spectrometry was also employed to attempt identification. Reproducible fragmentation of 19 parent peaks was found and 10 of these produced spectra that were consistent with identification obtained from matching to compounds in the MetaCyc database. These results demonstrate the utility of a sensitive CE-MS system for large scale metabolite detection in biological samples.

Microfluidic electrophoresis devices were coupled on-line to microdialysis for in vivo monitoring of primary amine neurotransmitters in rat brain. The devices contained a sample introduction channel for dialysate, a precolumn reactor for derivatization with o-phthaldialdehyde, a flow-gated injector, and a separation channel. Detection was performed using confocal laser-induced fluorescence. In vitro testing revealed that the initial device design had detection limits for amino acids of approximately 200 nM, relative standard deviation of peak heights of 2%, and separations within 95 s with up to 30,200 theoretical plates when applying an electric field of 370 V/cm. A second device design that allowed electric fields of 1320 V/cm to be applied while preserving the reaction time allowed separations within 20 s with up to 156,000 theoretical plates. Flow splitting into the electrokinetic network from hydrodynamic flow in the sample introduction channel was made negligible for sampling flow rates from 0.3 to 1.2 microL/min by placing a 360-microm-diameter fluidic access hole that had flow resistance (0.15-7.2) x 10(8)-fold lower than that of the electrokinetic network at the junction of the sample introduction channel and the electrokinetic network. Using serial injections, the device allowed the dialysate stream to be analyzed at 130-s intervals. In vivo monitoring was demonstrated by using the microdialysis/microfluidic device to record glutamate concentrations in the striatum of an anesthetized rat during infusion of the glutamate uptake inhibitor l-trans-pyrrolidine-2,4-dicarboxylic acid. These results prove the feasibility of using a microfabricated fluidic system coupled to sampling probes for chemical monitoring of complex media such as mammalian brain.

Liver X receptors (LXR) alpha and beta are nuclear oxysterol receptors with established roles in cholesterol, lipid, and carbohydrate metabolism. Although LXRs have been extensively studied in liver and macrophages, the importance for development and metabolism of other tissues and cell types is not as well characterized. We demonstrate here that although LXRalpha and LXRbeta are not required for adipocyte development per se, LXRbeta is required for the increase in adipocyte size that normally occurs with aging and diet-induced obesity. Similar food intake and oxygen consumption in LXRbeta-/- mice suggests that reduced storage of lipid in adipose tissue is not due to altered energy balance. Despite reduced amounts of adipose tissue, LXRbeta-/- mice on a chow diet have insulin sensitivity and levels of adipocyte hormones similar to wild type mice. However, these mice are glucose-intolerant due to impaired glucose-induced insulin secretion. Lipid droplets in pancreatic islets may result from accumulation of cholesterol esters as analysis of islet gene expression reveals that LXRbeta is required for expression of the cholesterol transporters, ABCA1 and ABCG1. Our data establish novel roles for LXRbeta in adipocyte growth, glucose homeostasis, and beta cell function.

In vivo microdialysis sampling was coupled to capillary liquid chromatography (LC)/electrospray ionization quadrupole ion trap mass spectrometry (MS) to monitor [Met]enkephalin and [Leu]enkephalin in the striatum of anesthetized and freely-moving rats. The LC system utilized a high-pressure pump to load 2.5 microl samples and desalt the 25 microm i.d. by 2 cm long column in 12 min. Samples were eluted with a separate pump at approximately 100 nl min(-1). A rapid gradient effectively separated the endogenous neuropeptides in 4 min. A comparison was made for operating the mass spectrometer in the MS2 and MS3 modes for detection of the peptides. In standard solutions, the detection limits were similar at 1-2 pM (2-4 amol injected); however, the reproducibility was improved with MS3 as the relative standard deviation was <5% compared with 20% for MS2 for 60 pM samples. For dialysate solutions, reconstructed ion chromatograms and tandem mass spectra had much higher signal-to-noise ratios in the MS3 mode, resulting in more confident detection at in vivo concentrations. The method was successfully used to monitor the peptides under basal conditions and with stimulation of peptide secretion by infusion of elevated K+ concentration., (Copyright 2005 John Wiley & Sons, Ltd.)

A microfluidic device that incorporates continuous perfusion and an on-line electrophoresis immunoassay was developed, characterized, and applied to monitoring insulin secretion from single islets of Langerhans. In the device, a cell chamber was perfused with cell culture media or a balanced salt solution at 0.6 to 1.5 microL min(-1). The flow was driven by gas pressure applied off-chip. Perfusate was continuously sampled at 2 nL min(-1) by electroosmosis through a separate channel on the chip. The perfusate was mixed on-line with fluorescein isothiocyanate-labeled insulin (FITC-insulin) and monoclonal anti-insulin antibody and allowed to react for 60 s as the mixture traveled down a 4 cm long reaction channel. The cell chamber and reaction channel were maintained at 37 degrees C. The reaction mixture was injected onto a 1.5 cm separation channel as rapidly as every 6 s, and the free FITC-insulin and the FITC-insulin-antibody complex were separated under an electric field of 500 to 600 V cm(-1). The immunoassay had a detection limit of 0.8 nM and a relative standard deviation of 6% during 2 h of continuous operation with standard solutions. Individual islets were monitored for up to 1 h while perfusing with different concentrations of glucose. The immunoassay allowed quantitative monitoring of classical biphasic and oscillatory insulin secretion with 6 s sampling frequency following step changes in glucose from 3 to 11 mM. The 2.5 cm x 7.6 cm microfluidic system allowed for monitoring islets in a highly automated fashion. The technique should be amenable to studies involving other tissues or cells that release chemicals.

An analytical method was developed to monitor amino acids collected by in vivo microdialysis. Microdialysate was continuously derivatized on-line by mixing 6 mM naphthalene-2,3-dicarboxyaldehyde (NDA) and 10 mM potassium cyanide with the dialysate stream in a fused silica capillary to form fluorescent products. Reaction time, determined by the flow rate and volume of reaction capillary, was 3 min. Derivatized amino acids were continuously delivered into a flow-gated interface and periodically injected onto a capillary electrophoresis unit equipped with a laser-induced fluorescence detection based on a commercial microscope. Separation was performed in the micellar electrokinetic chromatography mode using 30 mM sodium dodecyl sulfate in 15 mM phosphate buffer at pH 8.0 as the separation media. An electric field of 1.3 kV/cm was applied across a 10 cm long, 10 microm internal diameter separation capillary. These conditions allowed 17 amino acid derivatives to be resolved in less than 30 s. On-line injections could be performed at 30 s intervals for in vivo samples. Detection limits were from 10 to 30 nM for the amino acids. The method was applied to monitor the acute ethanol-induced amino acid level changes in freely moving rats. The results demonstrate the utility of the method to reveal dynamics of amino acid concentration in vivo.

The development of an efficient method for high-throughput analysis of multiple electropherograms or chromatograms collected in series is presented. The method, encoded in a computer program designated "Cutter", utilizes batch processing for determining chromatographic figures of merit (CFOM) including peak centroid times, heights, areas, signal-to-noise ratios (S/N), variance (sigma2), skew, excess, and plate number (N) across a set of separations collected serially. The software was validated using simulated data with varying S/N, skew, and excess. The accuracy of the analysis was comparable to or improved over commercial software with area calculation relative errors (RE) below 5% for simulated data with S/N = 5. File sets containing 1300 electropherograms were analyzed in 5 min, representing a nearly 200-fold reduction in analysis time from other methods. Incorporated within the program is a novel method for automated peak deconvolution using an Empirically Transformed Gaussian function. Area measurements of deconvoluted peaks were within 3% of the true value of a simulated data set with S/N = 5 and resolution (R(S)) = 1 for equivalent peaks, and within 10% when the ratio of the overlapped peak heights was 10:1.

A microfluidic device has been developed for the determination of insulin secreted from islets of Langerhans by a capillary electrophoresis competitive immunoassay. Online assays were performed by electrophoretically sampling anti-insulin antibody (Ab), fluorescein isothiocyanate-labeled insulin (FITC-insulin), and insulin from separate reservoirs and allowing them to mix as they traveled through a 4-cm reaction channel heated to 38 degrees C. From the reaction channel, samples were injected onto a 1.5-cm-long electrophoresis channel where the FITC-insulin and FITC-insulin-Ab complex were separated in 5 s using an electric field of 500 V/cm. Detection limits for insulin were 3 nM in this mode of operation. Assays could be collected at 15-s intervals with continuous sampling and online mixing for up to 30 min with no intervention. Relative standard deviation was 2-6% depending on the insulin concentration. Response time to a step change in insulin concentration was 30 s. For live cell monitoring, single islets were placed into a reservoir on the chip and fluid in the immediate vicinity was continuously sampled to detect insulin secretion from the islet. Monitoring of insulin secretion with electropherograms taken at 15-s intervals resolved secretory profiles characteristic of first- and second-phase insulin secretion. The method should be amenable to other cell or tissue types for measurements of release with high temporal resolution.