Search

ABSTRACT Computational fluid dynamics (CFD) techniques have become an important tool for investigating and predicting flow behavior in many industrial and engineering processes. In the last two decades, CFD has been used for the study, design, and improvement of irrigation equipment. Numerical simulations can be used to predict fluid flow, heat transfer, and chemical reactions within complex systems. The objective of this review is to provide an overview of the uses of CFD in irrigation engineering applications. The paper is organized into two main sections: fundamentals of CFD and irrigation engineering applications. The first section presents the main methods used in numerical simulations, basic equations to predict fluid flow parameters, meshing concerns, and convergence criteria. In the second section, we present applications related to friction and local head losses in pipes, liquid and solid-liquid flow simulation in drippers, chemical scaling, filters, sprinklers, direct-acting pressure-regulating valves, and Venturi injectors. The briefly described applications indicated that CFD modeling can be an accurate, quick, and feasible method for the investigation of flow parameters in irrigation pipes, fittings, emitters, and accessories. The CFD simulations can be useful for designing new products as well as for improving and optimizing existing products. Computational fluid dynamics uses in irrigation engineering must be encouraged, particularly for innovation purposes resulting from the cooperation between academia and irrigation companies.

Emitter clogging is a major problem in microirrigation systems, which may result from the isolated or combined effects of physical, chemical, and biological agents. Clogging caused by suspended solid particles is the most common plugging form of emitters. Water quality and emitter geometry are key aspects in clogging processes. Any suitable test procedure to assess the sensitivity of drippers to clogging should take into account the predominant factors that influence clogging and must reproduce the field conditions. This research set out to assess the performance and suitability of a laboratory clogging test procedure in order to validate a methodology and to provide scientific results that may support the standardization of a clogging test method. The evaluated methodology has been used by the IRSTEA laboratory since 1974 (Platform of Research and experiment on Science and Technology for Irrigation - PReSTI, formerly LERMI) and its contents are currently being discussed by the ISO TC23/SC18 committee. The aim is to define a standardized testing protocol to evaluate the sensitivity of emitters to clogging due to solid particles. Replications analyzing the clogging resistance of four models of emitting pipes were carried out in a laboratory. The clogging test procedure enabled an accurate assessment of the combinations of concentration and size of particles that caused clogging in each model of dripper. However, a significant variability in degree of clogging was identified when the results of replications for each model of dripper were compared. Several requirements, concerns, and improvements related to the clogging test protocol were discussed.