Search

AMPs are short, mainly cationic membrane-active peptides found in all living organism. They perform diverse roles including signaling and acting as a line of defense against bacterial infections. AMPs have been extensively investigated as templates to facilitate the development of novel antimicrobial therapeutics. Understanding the interplay between these membrane-active peptides and the lipid membranes is considered to be a significant step in elucidating the specific mechanism of action of AMPs against prokaryotic and eukaryotic cells to aid the development of new therapeutics. In this review, we have provided a brief overview of various NMR techniques commonly used for studying AMP structure and AMP-membrane interactions in model membranes and whole cells.

Two-dimensional NOE (nuclear Overhauser effect) NMR spectroscopy was employed to investigate the dynamic properties of water within lyotropic bicontinuous lipidic cubic phases (LCPs) formed by monoolein (MO). Experiments observed categorically different effective residence times of water molecules: (i) in proximity to the glycerol moiety of MO, and (ii) adjacent to the hydrophobic chain towards the hydrocarbon tail of MO, as evidenced by the opposite signs of intermolecular NOE cross peaks between protons of water and those of MO in 2D 1H-1H NOESY spectra. Spectroscopic data delineating the different effective residence times of water molecules within both the gyroid (QIIG) and diamond (QIID) phase groups corresponding to hydration levels of 35 and 40 wt%, respectively, are presented. Additionally, an increase in effective residence time of water molecules in proximity to the glycerol moiety of MO in LCPs was observed upon storage at ambient temperature and in the presence of an additive lipid, cholesterol. Atom-specific NOE build-up curves for protons of water and those of MO are also given. The results presented herein provide new insight into the physicochemical properties and behaviour of water in LCPs, and demonstrate an additional avenue for experimental study of water-lipid interactions and hydration dynamics in model membranes and nanomaterials using 2D NOE NMR spectroscopy.

Antimicrobial peptides are an important class of membrane-active peptides that can provide alternatives or complements to classic antibiotics. Among the many classes of AMPs, the histidine-rich family is of particular interest since they may induce pH-sensitive interactions with cell membranes. The AMP caerin 1.1 (Cae-1), from Australian tree frogs, has three histidine residues, and thus we studied the pH dependence of its interactions with model cell membranes. Using NMR spectroscopy and molecular dynamics simulations, we showed that Cae-1 induced greater perturbation of the lipid dynamics and water penetrations within the membrane interior in an acidic environment compared with physiological conditions. Using 31P solid-state NMR, the packing, chemical environment, and dynamics of the lipid headgroup were monitored. 2H solid-state NMR showed that Cae-1 ordered the acyl chains of the hydrophobic core of the bilayer. These results supported the molecular dynamics data, which showed that Cae-1 was mainly inserted within the lipid bilayer for both neutral and negatively charged membranes, with the charged residues pulling the water and phosphate groups inward. This could be an early step in the mechanism of membrane disruption by histidine-rich antimicrobial peptides and indicated that Cae-1 acts via a transmembrane mechanism in bilayers of neutral and anionic phospholipid membranes, especially in acidic conditions.

Nano-drug delivery systems may potentially overcome current challenges in the treatment of Parkinson's disease (PD) by enabling targeted delivery and more efficient blood-brain penetration ability. This study investigates novel gold nanoparticles (AuNPs) to be used as delivery systems for L-DOPA and dopamine by considering their binding capabilities in the presence and absence of a model protein, bovine serum albumin (BSA). Four different AuNPs were prepared by surface functionalization with polyethylene glycol (PEG), 1-adamantylamine (Ad), 1-adamantylglycine (AdGly), and peptidoglycan monomer (PGM). Fluorescence and UV-Vis measurements demonstrated the strongest binding affinity and L-DOPA/dopamine loading efficiency for PGM-functionalized AuNPs with negligible impact of the serum protein presence. Thermodynamic analysis revealed a spontaneous binding process between L-DOPA or dopamine and AuNPs that predominantly occurred through van der Waals interactions/hydrogen bonds or electrostatic interactions. These results represent PGM-functionalized AuNPs as the most efficient at L-DOPA and dopamine binding with a potential to become a drug-delivery system for neurodegenerative diseases. Detailed investigation of L-DOPA/dopamine interactions with different AuNPs was described here for the first time. Moreover, this study highlights a cost- and time-effective methodology for evaluating drug binding to nanomaterials.

Defining protein oligomeric state and/or its changes in solution is of significant interest for many biophysical studies carried out in vitro, especially when the nature of the oligomeric state is crucial in the subsequent interpretation of experimental results and their biological relevance. Nuclear magnetic resonance (NMR) is a well-established methodology for the characterization of protein structure, dynamics, and interactions at the atomic level. As a spectroscopic method, NMR also provides a compelling means for probing both molecular translational and rotational motion, two predominant measures of effective molecular size in solution, under identical conditions as employed for structural, dynamic and interaction studies. Protein translational diffusion is readily measurable by pulse gradient spin echo (PGSE) NMR, whereas its rotational correlation time, or rotational diffusion tensor when its 3D structure is known, can also be quantified from NMR relaxation parameters, such as 15N relaxation parameters of backbone amides which are frequently employed for probing residue-specific protein backbone dynamics. In this article, we present an introductory overview to the NMR measurement of bimolecular translational and rotational motion for assessing changes of protein oligomeric state in aqueous solution, via translational diffusion coefficients measured by PGSE NMR and rotational correlation times derived from composite 15N relaxation parameters of backbone amides, without need for the protein structure being available.

Antimicrobial peptides (AMPs) are host defense peptides, and unlike conventional antibiotics, they possess potent broad spectrum activities and, induce little or no antimicrobial resistance. They are attractive lead molecules for rational development to improve their therapeutic index. Our current studies examined dimerization of the de novo designed proline-rich AMP (PrAMP), Chex1-Arg20 hydrazide, via C-terminal thiol addition to a series of bifunctional benzene or phenyl tethers to determine the effect of orientation of the peptides and linker length on antimicrobial activity. Antibacterial assays confirmed that dimerization per se significantly enhances Chex1-Arg20 hydrazide action. Greatest advantage was conferred using perfluoroaromatic linkers (tetrafluorobenzene and octofluorobiphenyl) with the resulting dimeric peptides 6 and 7 exhibiting potent action against Gram-negative bacteria, especially the World Health Organization's critical priority-listed multidrug-resistant (MDR)/extensively drug-resistant (XDR) Acinetobacter baumannii as well as preformed biofilms. Mode of action studies indicated these lead PrAMPs can interact with both outer and inner bacterial membranes to affect the membrane potential and stress response. Additionally, 6 and 7 possess potent immunomodulatory activity and neutralise inflammation via nitric oxide production in macrophages. Molecular dynamics simulations of adsorption and permeation mechanisms of the PrAMP on a mixed lipid membrane bilayer showed that a rigid, planar tethered dimer orientation, together with the presence of fluorine atoms that provide increased bacterial membrane interaction, is critical for enhanced dimer activity. These findings highlight the advantages of use of such bifunctional tethers to produce first-in-class, potent PrAMP dimers against MDR/XDR bacterial infections.

Nuclear magnetic resonance (NMR) spectroscopy is well-established nowadays for the elucidation of the 3D structures of proteins and protein complexes, the evaluation of biomolecular dynamics with atomistic resolution across a range of time scales, the screening of drug candidates with site specificity, and for the quantitation of molecular translational diffusion. Lyotropic lipidic cubic phases (LCPs) are lipid bilayer-based materials with a complex geometry, formed via the spontaneous self-assembly of certain lipids in an aqueous environment at specific temperature ranges. LCPs have been successfully applied to the in meso crystallization of membrane proteins for structural studies by X-ray crystallography, and have also shown promising potential for serving as matrices for drug and nutrient delivery/release in vivo. The characterization of the structural and dynamics properties of LCPs is of significant interest for the application of these materials. Here we present a systematic review detailing the characterization of LCPs by solution NMR. Using LCPs formed by monoolein (MO) as an example, various aspects of LCPs readily accessible by solution NMR are covered, including spectral perturbation in the presence of additives, quantification of hydration levels, 13C relaxation-based measurements for studying atom-specific dynamics along the MO hydrocarbon chain, PGSE NMR measurement of translational diffusion and its correlation with release profiles, and the encapsulation of soluble proteins in LCPs. A brief discussion of future perspectives for the characterization of LCPs by solution NMR is also presented.

Dynamic nuclear polarization NMR spectroscopy was used to investigate the effect of the antimicrobial peptide (AMP) maculatin 1.1 on E. coli cells. The enhanced 15N NMR signals from nucleic acids, proteins and lipids identified a number of unanticipated physiological responses to peptide stress, revealing that membrane-active AMPs can have a multi-target impact on E. coli cells. DNP-enhanced 15N-observed 31P-dephased REDOR NMR allowed monitoring how Mac1 induced DNA condensation and prevented intermolecular salt bridges between the main E. coli lipid phosphatidylethanolamine (PE) molecules. The latter was supported by similar results obtained using E. coli PE lipid systems. Overall, the ability to monitor the action of antimicrobial peptides in situ will provide greater insight into their mode of action.

Maculatin 1.1 (Mac1) is an antimicrobial peptide (AMP) from an Australian tree frog and exhibits low micromolar activity against Gram-positive bacteria. The antimicrobial properties of Mac1 are linked to its disruption of bacterial lipid membranes, which has been studied extensively by in vitro nuclear magnetic resonance (NMR) spectroscopy and biophysical approaches. Although in vivo NMR has recently proven effective in probing peptide-lipid interplay in live bacterial cells, direct structural characterisation of AMPs has been prohibited by low sensitivity and overwhelming background noise. To overcome this issue, we report a recombinant expression protocol to produce isotopically enriched Mac1. We utilized a double-fusion construct to alleviate toxicity against the Escherichia coli host and generate the native N-free and C-amidated termini Mac1 peptide. The SUMO and intein tags allowed native N-terminus and C-terminal amidation, respectively, to be achieved in a one-pot reaction. The protocol yielded 0.1 mg/L of native, uniformly 15 N-labelled, Mac1, which possessed identical structure and activity to peptide obtained by solid-phase peptide synthesis.

The interpretation of molecular translational diffusion as measured by pulsed gradient spin-echo NMR (PGSE NMR) can be complicated by the presence of chemical exchange and/or dipolar cross-relaxation (including relayed cross-relaxation via spin diffusion). The magnitude of influence depends on the kinetics of exchange and/or dipolar cross-relaxation present within the system as well as the PGSE NMR sequences chosen for measurements. First, we present an exchange induced zero-crossing phenomenon for signal attenuation of water in lipidic cubic phases (formed by a mixture of monoolein and water) in the presence of pulsed gradients observed using a standard STimulated Echo (STE) sequence. This magnetization exchange induced zero-crossing phenomenon, a pseudo-negative diffraction-like feature, resembles that reported previously for restricted diffusion when locally anisotropic pores are polydisperse or randomly oriented. We then demonstrate the elimination of these exchange and/or dipolar cross-relaxation induced effects with the use of a chemical shift selective STE (CHESS-STE) sequence, adapted from the previously reported band-selective short transient STE sequence, along with results obtained from the bipolar pulse pair STE sequence for comparison. The CHESS-STE sequence introduced here represents a generic form of PGSE NMR sequences for obtaining water diffusion coefficients free from the influence of exchange and/or dipolar cross-relaxation in complex systems. It has potential applications in measuring translational diffusion of water in biopolymer mixtures as well as probing the microscopic structure in materials via water restricted diffusion measured by PGSE NMR, particularly when the potential presence of exchange/cross-relaxation is of concern.

Antimicrobial peptides (AMPs) have attracted attention as alternatives to classic antibiotics due to their expected limited pressure on bacterial resistance mechanisms. Yet, their modes of action, in particular in vivo, remain to be elucidated. In situ atomistic-scale details of complex biomolecular assemblies is a challenging requirement for deciphering the complex modes of action of AMPs. The large diversity of molecules that modulate complex interactions limits the resolution achievable using imaging methodology. Herein, the latest advances in in-cell solid-state NMR (ssNMR) are discussed, which demonstrate the power of this non-invasive technique to provide atomic details of molecular structure and dynamics. Practical requirements for investigations of intact bacteria are discussed. An overview of recent in situ NMR investigations of the architecture and metabolism of bacteria and the effect of AMPs on various bacterial structures is presented. In-cell ssNMR revealed that the studied AMPs have a disruptive action on the molecular packing of bacterial membranes and DNA. Despite the limited number of studies, in-cell ssNMR is emerging as a powerful technique to monitor in situ the interplay between bacteria and AMPs.

Maculatin 1.1 (Mac1) is an antimicrobial peptide (AMP) from the skin secretions of Australian tree frogs. In this work, the interaction of Mac1 with anionic phospholipid bilayers was investigated by NMR, circular dichroism (CD) spectroscopy, neutron reflectometry (NR) and molecular dynamics (MD). In buffer, the peptide is unstructured but in the presence of anionic (DPC/LMPG) micelles or (DMPC/DMPG/DHPC) bicelles adopts a helical structure. Addition of the soluble paramagnetic agent gadolinium (Gd-DTPA) into the Mac1-DPC/LMPG micelle solution showed that the N-terminus is more exposed to the hydrophilic Gd-DTPA than the C-terminus in micelles. 2H and 31P solid-state NMR showed that Mac1 had a greater effect on the anionic lipid (DMPG). A deuterium labeled Mac1 used in NR experiments indicated that the AMP spanned across anionic (PC/PG) bilayers, which was compatible with MD simulations. Simulations also showed that Mac1 orientation remained transmembrane in bilayers and wrapped on the surface of the micelles regardless of the lipid or detergent charge. Thus, the peptide orientation appears to be more susceptible to curvature than charged surface. These results support the formation of transmembrane pores by Mac1 in model bacterial membranes.

As we rapidly approach a post-antibiotic era in which multi-drug resistant bacteria are ever-pervasive, antimicrobial peptides (AMPs) represent a promising class of compounds to help address this global issue. AMPs are best-known for their membrane-disruptive mode of action leading to bacteria cell lysis and death. However, many AMPs are also known to be non-lytic and have intracellular modes of action. Proline-rich AMPs (PrAMPs) are one such class, that are generally membrane permeable and inhibit protein synthesis leading to a bactericidal outcome. PrAMPs are highly effective against Gram-negative bacteria and yet show very low toxicity against eukaryotic cells. Here, we review both the PrAMP family and the past and current definitions for this class of peptides. Computational analysis of known AMPs within the DRAMP database (http://dramp.cpu-bioinfor.org/) and assessment of their PrAMP-like properties have led us to develop a revised definition of the PrAMP class. As a result, we subsequently identified a number of unknown and unclassified peptides containing motifs of striking similarity to known PrAMP-based DnaK inhibitors and propose a series of new sequences for experimental evaluation and subsequent addition to the PrAMP family.

In-cell NMR offers great insight into the characterization of the effect of toxins and antimicrobial peptides on intact cells. However, the complexity of intact live cells remains a significant challenge for the analysis of the effect these agents have on different cellular components. Here we show that 31P solid-state NMR can be used to quantitatively characterize the dynamic behaviour of DNA within intact live bacteria. Lipids were also identified and monitored, although 31P dynamic filtering methods indicated a range of dynamic states for phospholipid headgroups. We demonstrate the usefulness of this methodology for monitoring the activity of the antibiotic ampicillin and the antimicrobial peptide (AMP) maculatin 1.1 (Mac1.1) against Gram-negative bacteria. Perturbations in the dynamic behaviour of DNA were observed in treated cells, which indicated additional mechanisms of action for the AMP Mac1.1 not previously reported. This work highlights the value of 31P in-cell solid-state NMR as a tool for assessing the antimicrobial activity of antibiotics and AMPs in bacterial cells.

Listeriolysin O (LLO) is a pore-forming toxin that enables survival and cell-to-cell spread of foodborne bacterial pathogen Listeria monocytogenes, which is responsible for the life-threatening disease, listeriosis. LLO-membrane interactions are crucial for pathogenicity of Listeria, but remained unexplained in detail at the molecular level. Here we addressed them by means of 2 H, 31 P, 13 C and 19 F solid-state NMR spectroscopy. Different fluid and ordered cholesterol-rich membrane lipid bilayer systems were prepared and checked for the integrity and properties in the presence of LLO. LLO has significantly changed dynamics of phospholipid acyl chains of more fluid cholesterol-rich bilayers, whereas the lipid bilayer organization was not affected. LLO has also affected cholesterol dynamics by increasing the intensity of low frequency motions, indicating direct interactions of LLO with cholesterol. Additionally, the LLO protein was shown to interact differently with lipid membranes, depending on the properties of cholesterol-rich membranes. The presented results, therefore, provide new insights into the interactions of the bacterial toxin LLO with cholesterol-rich membrane systems.

Listeria monocytogenes is a mammalian pathogen that causes gastroenteritis, miscarriages and infections of the central nervous system in immunocompromised individuals. Its main virulence factor is listeriolysin O (LLO), a pore-forming cholesterol-dependent cytolysin (CDC), which enables bacterial escape from the phagolysosome and contributes to bacterial pathogenicity. Details of cholesterol (Chol) recognition and membrane binding mechanisms by LLO are still not known. Here we used 19F-NMR spectroscopy in order to assess LLO-Chol interactions in solution and in a Chol-rich membrane environment. LLO has six tryptophan residues located in the region of the molecule that is first in contact with lipid membranes. 19F-LLO, which contained 5-fluoro-tryptophans, was prepared by using isotopic labelling in an E. coli expression system. Signals in the 19F-NMR spectrum of 19F-LLO were unambiguously assigned by using a series of single Trp → Phe point mutations. The results employing various cholesterol preparations in solution indicate that tryptophan residues are not directly involved in Chol binding in solution. However, significant chemical shift changes were observed upon LLO binding to Chol-rich membranes, highlighting the role of tryptophan residues in membrane interactions (W512) and oligomerisation (W189 and W489).

Pulsed-field gradient nuclear magnetic resonance has seen an increase in applications spanning a broad range of disciplines where molecular translational diffusion properties are of interest. The current study introduces and experimentally evaluates the measurement of translational diffusion coefficients of 15N-enriched biomolecules using a 1H-15N HMQC-filtered band-selective excitation short transient (BEST) sequence as an alternative to the previously described SOFAST-XSTE sequence. The results demonstrate that accurate translational diffusion coefficients of 15N-labelled peptides and proteins can be obtained using this alternative 1H-15N HMQC-filtered BEST sequence which is implementable on NMR spectrometers equipped with probes fitted with a single-axis field gradient, including most cryoprobes dedicated to bio-NMR. The sequence is of potential use for direct quantification of protein or peptide translational diffusion within complex systems, such as in mixtures of macromolecules, crowded solutions, membrane-mimicking media and in bicontinuous cubic phases, where conventional sequences may not be readily applicable due to the presence of intense signals arising from sources other than the protein or peptide under investigation.

The rise in antibiotic resistance has led to a renewed interest in antimicrobial peptides (AMPs) that target membranes. The mode of action of AMPs involves the disruption of the lipid bilayer and leads to growth inhibition and death of the bacteria. However, details at the molecular level of how these peptides kill bacteria and the reasons for the observed differences in selectivity remain unclear. Structural information is crucial for defining the molecular mechanism by which these peptides recognize, self-assemble and interact with a particular lipid membrane. Solid-state NMR is a non-invasive technique that allows the study of the structural details of lipid-peptide and peptide-peptide interactions. Following on from studies of antibiotic and lytic peptides, gramicidin A and melittin, respectively, we investigated maculatin 1.1, an AMP from the skin of Australian tree frogs that acts against Gram-positive bacteria. By using perdeuterated phospholipids and specifically labelled peptides, 2 H, 31 P and {31 P}15 N REDOR solid-state NMR experiments have been used to localize, maculatin 1.1 in neutral and anionic model membranes. However, the structure, location and activity depend on the composition of the model membrane and current advances in solid-state NMR spectroscopy now allow structure determination of AMPs in live bacteria.

UNLABELLED: The human relaxin peptide family consists of seven cystine-rich peptides, four of which are known to signal through relaxin family peptide receptors, RXFP1-4. As these peptides play a vital role physiologically and in various diseases, they are of considerable importance for drug discovery and development. Detailed structure-activity relationship (SAR) studies towards understanding the role of important residues in each of these peptides have been reported over the years and utilized for the design of antagonists and minimized agonist variants. This review summarizes the current knowledge of the SAR of human relaxin 2 (H2 relaxin), human relaxin 3 (H3 relaxin), human insulin-like peptide 3 (INSL3) and human insulin-like peptide 5 (INSL5). LINKED ARTICLES: This article is part of a themed section on Recent Progress in the Understanding of Relaxin Family Peptides and their Receptors. To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v174.10/issuetoc.

A major global health threat is the emergence of antibiotic-resistant microbes. Coupled with a lack of development of modified antibiotics, there is a need to develop new antimicrobial molecules and screening assays for them. In this study, we provide proof of concept that a large unilamellar vesicle (LUV) method used to study chloride ion efflux facilitated by ionophores and surfactant-like molecules that disrupt membrane integrity can be adapted to identify membrane-interactive antimicrobial peptides (AMPs) and to screen relative activity of AMPs. Lucigenin was encapsulated in LUVs in the presence of Cl– ion (NaCl), which quenches fluorescence, and then incubated with AMPs in 100 mM NaNO3 buffer. Upon AMP membrane interaction or disruption, the Cl– ion is exchanged with the NO3– ion, and the resultant lucigenin fluorescence is indicative of relative AMP activity. Seven AMPs were synthesized by solid-phase peptide chemistry and incubated with LUVs of different phospholipid compositions. Each AMP resulted in lucigenin fluorescence, which was dose dependent, and the relative fluorescence correlated with the minimum inhibitory concentration and minimum bactericidal concentration values for the corresponding peptide. Furthermore, using mammalian model phospholipid LUVs, lucigenin-induced fluorescence also correlated with the AMP cytotoxicity half-maximal inhibitory concentration values. The proline-rich AMP, Chex1-Arg20, which is non-lytic but interacts with the bacterial membrane resulted in lucigenin fluorescence of bacterial membrane model LUVs but not of mammalian membrane model LUVs. The fluorescent ion efflux assay developed here should have applicability for most AMPs and could be tailored to target particular bacterial species membrane composition, potentially leading to the identification of novel membrane-interactive AMPs. The rapid high-throughput method also allows for screening of relative AMP activity and toxicity before biological testing.

Biophysical studies were undertaken to investigate the binding and release of short interfering ribonucleic acid (siRNA) from lyotropic liquid crystalline lipid nanoparticles (LNPs) by using a quartz crystal microbalance (QCM). These carriers are based on phytantriol (Phy) and the cationic lipid DOTAP (1,2‐dioleoyloxy‐3‐(trimethylammonium)propane). The nonlamellar phase LNPs were tethered to the surface of the QCM chip for analysis based on biotin–neutravidin binding, which enabled the controlled deposition of siRNA–LNP complexes with different lipid/siRNA charge ratios on a QCM‐D crystal sensor. The binding and release of biomolecules such as siRNA from LNPs was demonstrated to be reliably characterised by this technique. Essential physicochemical parameters of the cationic LNP/siRNA lipoplexes—such as particle size, lyotropic phase behaviour, cytotoxicity, gene silencing and uptake efficiency—were also assessed. The SAXS data show that when the pH was lowered to 5.5 the structure of the lipoplexes did not change, thus indicating that the acidic conditions of the endosome were not a significant factor in the release of siRNA from the cationic lipidic carriers.

Antimicrobial peptides (AMPs) may act by targeting the lipid membranes and disrupting the bilayer structure. In this study, three AMPs from the skin of Australian tree frogs, aurein 1.2, maculatin 1.1 and caerin 1.1, were investigated against Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and vesicles that mimic their lipid compositions. Furthermore, equimolar mixtures of the peptides were tested to identify any synergistic interactions in antimicrobial activity. Minimum inhibition concentration and minimum bactericidal concentration assays showed significant activity against S. aureus but not against E. coli. Aurein was the least active while maculatin was the most active peptide and some synergistic effects were observed against S. aureus. Circular dichroism experiments showed that, in the presence of phospholipid vesicles, the peptides transitioned from an unstructured to a predominantly helical conformation (>50%), with greater helicity for POPG/TOCL compared to POPE/POPG vesicles. The helical content, however, was less in the presence of live E. coli and S. aureus, 25 and 5%, respectively. Equimolar concentrations of the peptides did not appear to form greater supramolecular structures. Dye release assays showed that aurein required greater concentration than caerin and maculatin to disrupt the lipid bilayers, and mixtures of the peptides did not cooperate to enhance their lytic activity. Overall, aurein, maculatin, and caerin showed moderate synergy in antimicrobial activity against S. aureus without becoming more structured or enhancement of their membrane-disrupting activity in phospholipid vesicles.

With the rise in antibiotic resistance, antimicrobial peptides (AMPs) show promise for therapeutic development, but higher specificity is required. PGLa-H is a naturally occurring decapeptide, reported to have moderate antibacterial activity and low hemolytic activity, with its sequence being identical to that of the C-terminal fragment of highly selective AMP, PGLa. DiPGLa-H, a sequential tandem repeat of PGLa-H, and Kiadin, an analogue with a Val to Gly substitution at position 15, display improved in vitro bactericidal activity against both Gram-negative and Gram-positive pathogens, with generally low toxicity for human cells. Despite Gly being a more flexible residue, NMR structural studies showed little difference in structure and dynamics between the two peptides for the first 14 residues, with somewhat greater flexibility in the C-terminus of Kiadin resulting in a tighter structure of the peptide in the presence of sodium dodecyl sulfate micelles. AMPs found in organisms often exhibit minimal amino acid mutations, and such small differences in peptide conformation may be utilized to design more selective AMPs.

Time-resolved AFM images revealed that the antimicrobial peptide (AMP) caerin 1.1 caused localised defects in the cell walls of lysed Klebsiella pneumoniae cells, corroborating a pore-forming mechanism of action. The defects continued to grow during the AFM experiment, in corroboration with large holes that were visualised by scanning electron microscopy. Defects in cytoplasmic membranes were visualised by cryo-EM using the same peptide concentration as in the AFM experiments. At three times the minimum inhibitory concentration of caerin, 'pores' were apparent in the outer membrane. The capsule of K. pneumoniae AJ218 was unchanged by exposure to caerin, indicating that the ionic interaction of the positively charged peptide with the negatively charged capsular polysaccharide is not a critical component of AMP interaction with K. pneumoniae AJ218 cells. Further, the presence of a capsule confers no advantage to wild-type over capsule-deficient cells when exposed to the AMP caerin.

Despite recent advances in the treatment of diabetes mellitus, storage of insulin formulations at 4 °C is still necessary to minimize chemical degradation. This is problematic in tropical regions where reliable refrigeration is not ubiquitous. Some degradation byproducts are caused by disulfide shuffling of cystine that leads to covalently bonded oligomers. Consequently we examined the utility of the non-reducible cystine isostere, cystathionine, within the A-chain. Reported herein is an efficient method for forming this mimic using simple monomeric building blocks. The intra-A-chain cystathionine insulin analogue was obtained in good overall yield, chemically characterized and demonstrated to possess native binding affinity for the insulin receptor isoform B. It was also shown to possess significantly enhanced thermal stability indicating potential application to next-generation insulin analogues.

Insulin-like peptide 5 (INSL5) is an orexigenic peptide hormone belonging to the relaxin family of peptides. It is expressed primarily in the L-cells of the colon and has a postulated key role in regulating food intake. Its G protein-coupled receptor, RXFP4, is a potential drug target for treating obesity and anorexia. We studied the effect of modification of the C-terminus of the A and B-chains of human INSL5 on RXFP4 binding and activation. Three variants of human INSL5 were prepared using solid phase peptide synthesis and subsequent sequential regioselective disulfide bond formation. The peptides were synthesized as C-terminal acids (both A- and B-chains with free C-termini, i.e., the native form), amides (both chains as the C-terminal amide) and one analog with the C-terminus of its A-chain as the amide and the C-terminus of the B-chain as the acid. The results showed that C-terminus of the B-chain is more important than that of the A-chain for RXFP4 binding and activity. Amidation of the A-chain C-terminus does not have any effect on the INSL5 activity. The difference in RXFP4 binding and activation between the three peptides is believed to be due to electrostatic interaction of the free carboxylate of INSL5 with a positively charged residue (s), either situated within the INSL5 molecule itself or in the receptor extracellular loops.

Heterodimeric peptides linked by disulfide bonds are attractive drug targets. However, their chemical assembly can be tedious, time-consuming, and low yielding. Inspired by the cellular synthesis of pro-insulin in which the two constituent peptide chains are expressed as a single-chain precursor separated by a connecting C-peptide, we have developed a novel chemically cleavable bis-linker tether which allows the convenient assembly of two peptide chains as a single "pro"-peptide on the same solid support. Following the peptide cleavage and post-synthetic modifications, this bis-linker tether can be removed in one-step by chemical means. This method was used to synthesize a drug delivery-cargo conjugate, TAT-PKCi peptide, and a two-disulfide bridged heterodimeric peptide, thionin (7-19)-(24-32R), a thionin analogue. To our knowledge, this is the first report of a one-pot chemically cleavable bis-linker strategy for the facile synthesis of cross-bridged two-chain peptides.

Understanding the structure of membrane-active peptides faces many challenges associated with the development of appropriate model membrane systems as the peptide structure depends strongly on the lipid environment. This perspective provides a brief overview of the approach taken to study antimicrobial and amyloid peptides in phospholipid bilayers using oriented bilayers and magic angle spinning techniques. In particular, Boltzmann statistics REDOR and maximum entropy analysis of spinning side bands are used to analyse systems where multiple states of peptide or lipid molecules may co-exist. We propose that in future, rather than model membranes, structural studies in whole cells are feasible.