Search

International audience; Two-dimensional covalent organic frameworks (COFs) have emerged as promising materials for energy storage applications exhibiting enhanced electrochemical performance. While most of the reported organic cathode materials for zinc-ion batteries use carbonyl groups as electrochemically-active sites, their high hydrophilicity in aqueous electrolytes represents a critical drawback. Herein, we report a novel and structurally robust olefin-linked COF-TMT-BT synthesized via the aldol condensation between 2,4,6-trimethyl-1,3,5-triazine (TMT) and 4,4′-(benzothiadiazole-4,7-diyl)dibenzaldehyde (BT), where benzothiadiazole units are explored as novel electrochemically-active groups. Our COF-TMT-BT exhibits an outstanding Zn2+ storage capability, delivering a state-of-the-art capacity of 283.5 mAh g−1 at 0.1 A g−1. Computational and experimental analyses reveal that the charge-storage mechanism in COF-TMT-BT electrodes is based on the supramolecularly engineered and reversible Zn2+ coordination by the benzothiadiazole units.

Of various atomically dispersed metal catalysts, those based on single Ni atoms are among the most efficient electrocatalysts for CO2 reduction. However, the activity of these catalysts is determined by the coordination environment of Ni sites. Here, N and S co-coordinated Ni sites were successfully prepared using a nickel phosphorus trisulfide two-dimensional template to form a sandwich-like conjugated microporous polymer. As-prepared Ni single atom–based porous carbon nanosheets were proved to possess N/S co-coordination via X-ray absorption spectroscopy. As electrocatalysts for CO2 reduction, the prepared porous carbon nanosheets achieved over 95% CO selectivity rate and −7.8 mA cm−2 current density (−0.8 V vs. reversible hydrogen electrode). This performance could be attributed to the sheet-like morphology of the nanosheets with long-distance conductivity and the rich single N/S-coordinated Ni atoms with high activity. The fundamental understanding of manipulating such a coordination environment revealed in this study can be used to create versatile single-metal atom–based catalysts for high-efficient energy conversion.

Microsupercapacitors (MSCs) have drawn great attention for use as miniaturized electrochemical energy storage devices in portable, wearable, as well as implantable electronics. Many materials have been developed as electrodes for MSCs. However, the thin-film fabrication for most of these materials involves multistep operations, including filtration, spray coating, and sputtering. Most importantly, these methods present challenges for the preparation of thin films at the atomic or molecular scale. Therefore, the understanding of performance of ultrathin-film-based MSCs remains challenge. Herein, a B/N-enriched polymer film is successfully prepared using the photoassisted interfacial approach. The as-synthesized polymer film exhibits typical semiconductive characteristics and can be easily scaled up to a large area of up to tens of square centimeters. This ultrathin polymer film can be directly transferred to silicon wafers to fabricate MSC through laser scribing. The prepared MSC exhibits specific volumetric capacitance as high as 20.9 F cm-3, corresponding to volumetric energy density of 2.9 mWh cm-3 (at 0.1 V s-1). Moreover, the volumetric power density can reach 1461 W cm-3, surpassing most existing semiconductive polymer film-based MSC devices. In addition, the prepared MSC exhibits typical AC line-filtering ability (-67° at 120 Hz). This study offers a facile interfacial approach to preparing semiconductive polymer films with aromatic moieties for microsized energy storage devices.

Developing effective electrocatalysts for the oxygen reduction reaction is of great significance for clean and renewable energy technologies, such as metal-air batteries and fuel cells. Defect engineering is the central focus of this field because the overall catalytic performance crucially depends on highly active defects. For the ORR, topological defects have been proven to have a positive effect. However, because preparation and characterization of such defects are difficult, a basic understanding of the relationship between topological defects and catalytic performance remains elusive. In this study, topological defect-containing Fe/N co-doped mesoporous carbon nanosheets were synthesized using azulene-based sandwich-like polymer nanosheets as the precursor. As electrocatalysts, such porous carbon nanosheets exhibited promising ORR activity, methanol tolerance ability, and stability with a half-wave potential of 841 mV under alkaline conditions, which is superior to those of most of the reported porous carbons. As the air cathode for Zn-air batteries, the catalyst exhibited a peak power density of 153 mW cm-2 and a specific capacity of 628 mA h g-1,which were higher than those of a Pt/C-based Zn-air battery. Density functional theory calculation further proved the positive effect of topological defects on the oxygen reduction activity. These results indicate that bottom-up topological defect engineering could be a new and promising strategy for developing high-performance electrocatalysts.

Metal porphyrins, which possess metal-N coordination centers, are important building blocks for the construction of porous organic materials with catalytic performance. However, most of the previous work has focused on controlling the metal elements instead of the metal-N coordinations. Here, Pt(II) N-confused porphyrin and Pt(II) porphyrin based conjugated microporous polymers were synthesized by Yamamoto coupling reaction. The structural and property differences of Pt-N

Atomically nitrogen-coordinated iron atoms on carbon (FeNC) catalysts are emerging as attractive materials to substitute precious-metal-based catalysts for the oxygen reduction reaction (ORR). However, FeNC usually suffers from unsatisfactory performance due to the symmetrical charge distribution around the iron site. Elaborately regulating the microenvironment of the central Fe atom can substantially improve the catalytic activity of FeNC, which remains challenging. Herein, N/S co-doped porous carbons are rationally prepared and are verified with rich Fe-active sites, including atomically dispersed FeN

Highly active, cost-effective and durable electrocatalysts for the oxygen reduction reaction (ORR) are critically important for renewable energy conversion and storage. Here we report a 3D bicontinuous nitrogen doped nanoporous graphene electrocatalyst co-anchoring with atomically dispersed nickel and copper atoms ((Ni,Cu)–NG) as a highly active single-atom ORR catalyst, fabricated by the combination of chemical vapor deposition and high temperature gas transportation. The resultant (Ni,Cu)–NG exhibits an exceptional ORR activity in alkaline electrolytes, comparable to the Pt-based benchmarks, from the synergistic effect of the CuNx and NiNx complexes. Endowed with high catalytic activity and outstanding durability under harsh electrochemical environments, rechargeable zinc–air batteries using (Ni,Cu)–NG as the cathodes show excellent energy efficiency (voltage gap of 0.74 V), large power density (150.6 mW cm−2 at 250 mA cm−2) and high cycling stability (>500 discharge–charge cycles at 10 mA cm−2). This study may pave an efficient avenue for designing highly durable single-atom ORR catalysts for metal–air batteries.

Heterostructures exhibit considerable potential in the field of energy conversion due to their excellent interfacial charge states in tuning the electronic properties of different components to promote catalytic activity. However, the rational preparation of heterostructures with highly active heterosurfaces remains a challenge because of the difficulty in component tuning, morphology control, and active site determination. Herein, a novel heterostructure based on a combination of RuMo nanoalloys and hexagonal N-doped carbon nanosheets is designed and synthesized. In this protocol, metal-containing anions and layered double hydroxides are employed to control the components and morphology of heterostructures, respectively. Accordingly, the as-made RuMo-nanoalloys-embedded hexagonal porous carbon nanosheets are promising for the hydrogen evolution reaction (HER), resulting in an extremely small overpotential (18 mV), an ultralow Tafel slope (25 mV dec-1 ), and a high turnover frequency (3.57 H2 s-1 ) in alkaline media, outperforming current Ru-based electrocatalysts. First-principle calculations based on typical 2D N-doped carbon/RuMo nanoalloys heterostructures demonstrate that introducing N and Mo atoms into C and Ru lattices, respectively, triggers electron accumulation/depletion regions at the heterosurface and consequently reduces the energy barrier for the HER. This work presents a convenient method for rational fabrication of carbon-metal heterostructures for highly efficient electrocatalysis.

International audience; 2D porous polymers with a planar architecture and high specific surface area have significant applications potential, such as for photocatalysis, electrochemical catalysis, gas storage and separation, and sensing. Such 2D porous polymers have generally been classified as 2D metal–organic frameworks, 2D covalent organic frameworks, graphitic carbon nitride, graphdiyne, and sandwich‐like porous polymer nanosheets. Among these, 2D porous polymers with sp2‐hybridized carbon (Csp2) bonding are an emerging field of interest. Compared with 2D porous polymers linked by B–O, C=N, or C≡C bonds, Csp2‐linked 2D porous polymers exhibit extended electron delocalization resulting in unique optical/electrical properties, as well as high chemical/photostability and tunable electrochemical performance. Furthermore, such 2D porous polymers are one of the best precursors for the fabrication of 2D porous carbon materials and carbon skeletons with atomically dispersed transition‐metal active sites. Herein, rational synthetic approaches for 2D porous polymers with Csp2 bonding are summarized. Their current practical photoelectric applications, including for gas separation, luminescent sensing and imaging, electrodes for batteries and supercapacitors, and photocatalysis are also discussed.

Single-atom catalysts (SACs) have rapidly entered the field of nanomaterials and demonstrated great potential for energy devices in recent years. Of all types of SACs, porous carbon-based SACs are the most popular species because of their excellent conductivity, large specific surface area, and easily tunable heteroatom and metal components. However, most of the reported cases focus on the metal centers and their coordination environments, while they do not pay much attention to carbon precursors and carbon transformation during high-temperature treatment. In this work, we use a high-entropy aromatic molecule, azulene, for rational synthesis of azulene-enriched, sandwich-like polymer nanosheets and corresponding single-Fe-dispersed porous carbon nanosheets. The azulene-based metal-free polymer nanosheets exhibit a narrow band gap and temperature-dependent magnetism. As proof-of-concept electrocatalysts for CO2 reduction, the prepared carbon nanosheets exhibit high activity and stability. Operando X-ray absorption spectroscopy and density functional theory studies reveal the high activity of Fe-N coordination sites in the presence of 5/7-membered carbon ring-based topological defects in the carbon skeleton. Taken together, this work provides a new method of synthesizing high-entropy carbons using azulene-based high-entropy molecule as precursor and paves the way toward high-efficiency SACs with rich topological defects for energy conversion.

International audience; Metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) have been extensively investigated during the last two decades. More recently, a family of hybrid materials (i.e., MOF@COF) has emerged as particularly appealing for gas separation and storage, catalysis, sensing, and drug delivery. MOF@COF hybrids combine the unique characteristics of both MOF and COF components and exhibit peculiar properties including high porosity and large surface area. In this work, we show that the infiltration of redox-active 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules into the pores of MOF@COF greatly improves the characteristics of the latter, thereby attaining high-performance energy storage devices. Density functional theory (DFT) calculations were employed to guide the design of a MOF@COF-TCNQ hybrid with the TCNQ functional units incorporated in the pores of MOF@COF. To demonstrate potential application of our hybrids, the as-synthesized MOF@COF-TCNQ hybrid has been employed as an active material in supercapacitors. Electrochemical energy storage analysis revealed outstanding supercapacitor performance, as evidenced by a specific areal capacitance of 78.36 mF cm–2 and a high stack volumetric energy density of 4.46 F cm–3, with a capacitance retention of 86.4% after 2000 cycles completed at 0.2 A cm–2. DFT calculation results strongly indicate that the high capacitance of MOF@COF-TCNQ has a quantum capacitance origin. Our liquid-phase infiltration protocol of MOF@COF hybrids with redox-active molecules represents a efficacious approach to design functional porous hybrids.