Search

Hepatitis C is an infectious disease that leads to acute and chronic liver illnesses. Currently, there are no effective vaccines against this deadly virus. Direct acting antiviral (DAA) drugs are given in the combination with ribavirin and pegylated interferon which lead to adverse effects. Through in silico analysis, the structure-based docking study was performed against NS3/4A protease and NS5B polymerase proteins of HCV. In the current study, multiple e-pharmacophore-based virtual screening methods such as HTVS, SP, and XP were carried out to screen natural compounds and enamine databases. Our result outcomes revealed that CID AE-848/13196185 and CID AE-848/36959205 compounds show good binding interactions with protease protein. In addition, CID 15081408 and CID 173568 show better binding interactions with the polymerase protein. Further to validate the docking results, we performed molecular dynamics simulation for the top hit compounds bound with protease and polymerase proteins to illustrate conformational differences in the stability compared with the active site of the cocrystal inhibitor. Thus, the current study emphasizes these compounds could be an effective drug to treat HCV.

The utility of plant tissues as scaffolding materials has been gaining significant interest in recent years owing to their unique material characteristics that are ideal for tissue regeneration. In this study, the degradation and biocompatibility of natural cellulosic scaffolds derived from

Lead-free Cs3Bi2I9 material is chosen to eliminate its single-phase synthesis difficulty and implementing Cs3Bi2I9@SiO2 towards bioimaging applications. Cytotoxicity of Cs3Bi2I9@SiO2 was demonstrated using MTT assay in L929 fibroblast cells.

Many countries in the world have recently experienced an outbreak of COVID-19, turned out to be a pandemic which significantly affected the world economy. Among many attempts to treat/control infection or to modulate host immunity, many small molecules including steroids were prescribed based on their use against other viral infection or inflammatory conditions. A recent report established the possibility of usage of a corticosteroid against the virus through inhibiting NSP-15; an mRNA endonuclease of SARS-CoV-2 and thereby viral replication. This study aimed to identify potential anti-viral agents for the virus through computational approaches and to validate binding properties with the protein target through molecular dynamics simulation. Unlike the conventional approaches, dedicated data base of steroid like compounds was used for initial screening along with dexamethasone and cortisone, which are used in the treatment of COVID-19 affected population in some countries. Molecular docking was performed for three compounds filtered from data base in addition to dexamethasone and Cortisone followed by molecular dynamics simulation analysis to validate the dynamics of binding at the active site. In addition, analysis of ADME properties established that these compounds have favorable drug-like properties. Based on docking, molecular dynamics simulation studies and various other trajectory analyses, compounds that are identified could be suggested as therapeutics or precursors towards designing new anti-viral agents against SARS-CoV-2, to combat COVID-19. Also, this is an attempt to study the impact of steroid compounds on NSP-15 of SARS-CoV-2, since many steroid like compounds are used during the treatment of COVID-19 patients.

Low-energy operation is predominant feature in the modern wireless sensor node and implantable biomedical applications. Scaling the supply voltage towards sub-/near-threshold level is vital design methodology to achieve energy-efficient operation. Voltage scaling can be adopted in the multiple supply voltage design incorporating interfacing circuit called voltage level shifters to achieve power-efficient operation. This paper presents differential cascode voltage switch (DCVS) structure based high-speed and low-energy voltage level shifter for converting subthreshold voltage to nominal output voltage. The proposed level shifter (LS) utilizes NMOS/PMOS diode pairs along with the cross-coupled PMOS to address the current contention issue by suppressing the current from pull-up network while pull-down network is activated. The switching speed of the level conversion is enhanced by pass transistor and boosting devices in the pull-down network. Further, split-gate inverter/buffer at the output stage ensures high performance by alleviating static power and accelerating speed performance. The proposed LS is implemented in CMOS 180nm technology on Cadence (Virtuoso) platform and analyzed using Spectre circuit simulator. The simulation results reveal the subthreshold level conversion from 220 mV to 1.8 V and wider frequency range of conversion. In addition, it ensures the delay of 8.57 ns, energy/transition of 39.4 fJ for level conversion from 0.4 V to 1.8 V with input signal frequency of 1 MHz. Moreover, the LS consumes static power of 0.302 nW at standby mode.

Snakebite and its envenomation are a significant health and economic burden worldwide. Animal (horse/sheep)-based immunoglobulins derived from hyperimmune animal serum or plasma is the current trea...

Post-surgery implant infection is one of the most challenging issues in orthopedics and it is mainly caused by infective micro-organisms. A potential approach to overcome this issue is developing biomaterials with efficient antibacterial activity. The main intention of this present research is devoted to ascorbic acid-assisted microwave synthesis of mesoporous (silver) Ag-doped hydroxyapatite (HAp) nanorods using biowaste seashells with antibacterial properties. XRD, FTIR, and Raman spectroscopy results revealed that the synthesized nanoparticles are hexagonal crystalline HAp. Further, the silver-doped HAp was also successfully produced without affecting the HAp crystalline phase by forming electrostatic interaction with PO

The structural complexity of human knee meniscus warrants a suitable 3D microenvironment for its successful regeneration. For this, 3D porous poly-e-caprolactone (PCL) scaffold structures were prepared using freeze drying method (lyophilization). PCL was dissolved in different weight percentages (10, 15, 20% w/v, coded as P10, P15 and P20, respectively) in acetone and lyophilized to develop 3D porous structures. The scaffolds were studied for their morphological, mechanical and functional properties. Compression tests were performed to understand their compressive properties and structural integrity. Results indicate that P10 is most suitable considering the highest porosity (above 85%), uniform pore distribution, better resiliency and less than 40% compression at a load of 30 kg/cm2 for 1 min. Further, the effect of a unique combination of biomolecule (UCM) functionalization in 3D PCL scaffold (P10) on human meniscal cell attachment, growth and proliferation was studied in detail. The developed scaffolds were also characterized for dynamic mechanical properties and compared with native human meniscal tissue properties. The primary human meniscus cell attachment, growth and proliferation on to the scaffolds were studied and analyzed using SEM and Hoechst staining experiments. Extracellular matrix secretion (glycosaminoglycans and collagen) in the cell culture medium was estimated. UCM-functionalized PCL 3D porous scaffold, P10 showed better cell attachment and proliferation indicating its potential for meniscus tissue engineering applications.

In this study, a one pot facile synthesis of ferromagnetic manganese ferrite nanoparticles (MnFe2O4) was carried out using chemical co-precipitation method for mineralization of azo dye (Congo red (CR)) in aqueous solution under visible light irradiation. The synthesized MnFe2O4 nanoparticles were highly crystalline and showed face-centred cubic (FCC) structure with average particle size of 58 ± 4 nm. The BET analysis of the MnFe2O4 nanoparticles revealed the mesoporous distribution of material with high surface area can provide large electro active sites and short diffusion paths for the transport of ions which plays a vital role in the photocatalytic degradation of CR. The point of zero charge (pHPZC) was observed to be 6.7 indicating favourable condition for material-anionic dye interaction. The XPS studies revealed that the large amounts of oxygen vacancies were produced due to the defects in the lattice oxygen. The MnFe2O4 nanoparticles mineralised 98.3 ± 0.2% of 50 mg/L CR within 30 min when tested in photocatalytic reactor under 565 nm. The particles were recoverable under the influence of an external magnet after the photocatalytic reaction and were reusable. The recovered nanoparticles showed 96% of CR degradation efficiency even after five cycles of reuse. The by-product analysis with GC–MS indicated mineralization of CR into simple alcohols and acids. The aqueous solution containing mineralised CR was nontoxic to Trigonella foenumgraecum and Vigna mungo seeds and favoured increased germination, plumule and radicle length when compared to untreated CR.

Land application of livestock manure introduces antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) into the soil environment. The objectives of this study were to examine the changes of resistome and mobilome in runoff and soil as a function of setback distance, i.e., the distance between manured soil and surface water, and to quantify the contributions of manure and background soil to the ARGs and MGEs in surface runoff. The resistome and mobilome in runoff and soil from a field-scale plot study were characterized using a high throughput quantitative polymerase chain reaction (HT-qPCR) array. It was estimated that a setback distance of ~40 m is required to reduce the total abundance of ARGs and MGEs in runoff from amended plots to that in control runoff. The resistome and mobilome of the soil in the setback region was not affected by manure-borne ARGs and MGEs. SourceTracker analyses revealed that background soil gradually became the predominant source of the ARGs and MGEs in runoff as setback distance increased. The results demonstrate how manure-borne ARGs and MGEs dissipated in agricultural runoff with increasing setback distance and had limited impacts on the resistome and mobilome of soil within the setback region.

Nano-crystalline Zrx-Cu100-x (x = 20-100 at.%) thin films with thickness ranging from 50 to 185 nm were deposited by magnetron co-sputtering with individual Zr and Cu targets. The as-sputtered thin films were characterized by Field Emission Scanning Electron Microscope (FE-SEM), Atomic Force Microscopy (AFM) and Glancing Incidence X-ray Diffraction (GIXRD) for structural and morphological properties. The crystallite size was found to decrease from 57 nm to 37 nm upon increasing the Zr content from 20 to 30 at.% with slight increase in the lattice strain from 0.17 to 0.33%. Further, increase in Zr content to 40 at.% leads to increase in the crystallite size to 57 nm due to stabilization of C10Zr7 phase along with the presence of nanocrystalline Cu-Zr phase. A bimodal distribution of grain size was observed from FE-SEM micrograph was attributed to the highest surface roughness in Zr30Cu70 thin films comprised of Cu10Zr7, Cu9Zr2, Cu-Zr intermetallic phases. In-vitro electrochemical behaviors of nano-crystalline Zrx-Cu100-x thin films in simulated body fluid (SBF) were investigated using potentiodynamic polarization studies. Electrochemical impedance spectroscopy (EIS) data fitting by equivalent electrical circuit fit model suggests that inner bulk layer contributes to high bio-corrosion resistance in Zrx-Cu100-x thin films with increase in Zr content. The results of cyto-compatibility assay suggested that Zr-Cu thin film did not introduce cytotoxicity to osteoblast cells, indicating its suitability as a bio-coating for minimally invasive medical devices.

Androgenetic alopecia, a major cause for baldness, is caused by the deposition of dihydrotestosterone (DHT) at the androgen receptors present in the pilosebaceous unit (PSU). Finasteride (FIN) is a potent 5α-reductase inhibitor capable of preventing the conversion of testosterone to DHT. But, its oral administration in males causes infertility. An attempt was made to prepare ethosomes of FIN with a size range 100-300 nm to enhance its delivery to the PSU. Finasteride loaded ethosomes (FES) were prepared using an ultra-probe sonicator and characterized for its size, morphology, surface charge and entrapment efficiency. The ability of FES to permeate across rat skin and frontal scalp skin of human cadaver was also evaluated. The spherical shaped ethosomes of different batches were in the size range of 107.8 ± 2.50 to 220.4 ± 6.92 nm and showed good permeation across rat skin and frontal scalp skin of human cadaver when compared to the unencapsulated FIN. The results portrayed the ability of FES to permeate across the stratum corneum to reach the PSU of the hair follicle. Although additional use of permeation enhancer increases the permeation of FIN across the skin, its addition may not be a favourable option for the deposition of ethosomes in the PSU.

ObjectivesThis study was carried out to investigate the impact of various isolated phytochemical components present in the Wattakaka volubilis leaves for the growth and proliferation of human osteoblast like cells (MG63).Key findingsEthyl acetate was found to be the best solvent for potential extraction of phytocompounds. Further, the MTT assay was carried out to deduce the viability of 44 isolated phytochemicals. Ten phytochemical fractions found to increase the cell growth were subjected to statistical tool namely Plackett–Burman and Central composite design to screen the optimum phytochemical fraction and its dosage. The active phytochemical constituents were analysed and identified as hexadeconoic acid, octadeconoic acid, N,N-diisopropyl(2,2,3,3,3-pentafluoropropyl)amine using GC-MS and HPLC techniques. The impact of optimized concentration was assessed on osteoblast cells. The maximum % cell viability, % DNA and collagen content were found to be 164.44, 159.32 and 3.81, respectively.ConclusionsThe results confirmed that the optimized fraction containing decanoic acid and isopropyl amine at particular concentration stimulated the proliferation of human osteoblast (MG63) cells. Hence, the optimized concentration of this compound from W. volubilis may used for treatment of bone related injuries externally.

The present study reports the synthesis of a biocompatible, eco-friendly, anisotropic cation doped hydroxyapatite nanoparticles (nHAp) for strontium removal from aqueous environment. The nHAp was modified by cation doping, characterized using suitable techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and, high resolution transmission electron microscopy (HRTEM) attached with selected area electron diffraction (SAED) and energy dispersive X-ray spectroscopy (EDAX). nHAp based materials were investigated for its strontium adsorption property with and without calcination. Successful doping of the cations into the nHAp matrix was confirmed by X-ray photoelectron spectroscopy (XPS). The morphology and the particle size of the nHAp varied significantly with cation doping (Na, Mg and Al) and calcination. Calcination of nHAp decreased the dissolution rate when compared to uncalcined nHAp. The biocompatibility and toxicity studies of modified nHAp with human osteoblast (MG63) cell line indicated that the cation doping onto nHAp had considerable impact on its toxicity. In the initial screening studies, Al-nHAp and Mg-nHAp showed higher strontium adsorption percentage of 83.90 ± 3.03 and 70.98 ± 2.74 respectively. The adsorption capacity of the materials was much superior to many of the HAp based materials reported earlier. These studies clearly indicate that the cation doped, degradable (for efficient disposal of adsorbate saturated HAp beyond reuse), eco-friendly nHAp is suitable for removal of strontium from contaminated water.

Wattakaka volubilis, a medicinal plant, is known to exhibit various potential health benefits and has traditionally been used in Ayurveda for various medicinal applications. In the present study, phytochemicals hexadecanoic acid, octadecanoic acid and N,N-Diisopropyl(2,2,3,3,3-pentafluoropropyl)amine isolated from W. volubilis leaf extract were co-electrospun with gelatin nanofibers for meniscus and osteoblast cell attachment and proliferation. The electrospun nanofibers were characterized using suitable techniques such as a scanning electron microscope and Fourier transform infrared spectroscopy. The mechanical property of electrospun gelatin nanofibers and phytochemicals incorporated gelatin nanofibers were tensile tested. Both the control and phytochemical loaded nanofiber exhibited a similar stress–strain trend. The average diameter of the control and phytocompound loaded gelatin nanofiber was found to be 300 ± 5.5 nm and 483 ± 12 nm, respectively. The rate of biodegradation of the control and phytochemical loaded nanofiber was analyzed in a simulated body fluid. The cell attachment and proliferation were monitored using a fluorescence microscope after appropriate staining. The cell viability, DNA content, extracellular secretion confirmed that the phytocompound loaded gelatin nanofibers were non-toxic and enhanced the meniscus and osteoblast cell growth and proliferation. This phytocompound loaded gelatin matrix may be used as a potential scaffold for cartilage and bone tissue engineering applications.

Aneesia Varkey,1,2 Elakkiya Venugopal,2 Ponjanani Sugumaran,2 Gopinathan Janarthanan,1 Mamatha M Pillai,2 Selvakumar Rajendran,2 Amitava Bhattacharyya1 1Advanced Textile and Polymer Research Laboratory, 2Tissue Engineering Laboratory, PSG Institute of Advanced Studies, Coimbatore, Tamil Nadu, India Abstract: The present study was carried out to investigate the impact of various types of silk fibroin (SF) scaffolds on human osteoblast-like cell (MG63) attachment and proliferation. SF was isolated from Bombyx mori silk worm cocoons after degumming. Protein concentration in the degummed SF solution was estimated using Bradford method. Aqueous SF solution was used to fabricate three different types of scaffolds, viz, electrospun nanofiber mat, sponge, and porous film. The structures of the prepared scaffolds were characterized using optical micro­scopy and field emission scanning electron microscopy. The changes in the secondary structure of the proteins and the thermal behavior of the scaffolds were determined by Fourier transform infrared spectroscopy and thermo-gravimetric analysis, respectively. The biodegradation rate of scaffolds was determined by incubating the scaffolds in simulated body fluid for 4weeks. MG63 cells were seeded on the scaffolds and their attachment and proliferation onto the scaffolds were studied. The MTT assay was carried out to deduce the toxicity of the developed scaffolds. All the scaffolds were found to be biocompatible. The amount of collagen produced by the osteoblast-like cells growing on different scaffolds was estimated. Keywords: silk fibroin scaffold, electrospun nanofiber, porous film, sponge, osteoblast

Nano-crystalline Zrx-Cu100-x (x = 20-100 at.%) thin films with thickness ranging from 50 to 185 nm were deposited by magnetron co-sputtering with individual Zr and Cu targets. The as-sputtered thin films were characterized by Field Emission Scanning Electron Microscope (FE-SEM), Atomic Force Microscopy (AFM) and Glancing Incidence X-ray Diffraction (GIXRD) for structural and morphological properties. The crystallite size was found to decrease from 57 nm to 37 nm upon increasing the Zr content from 20 to 30 at.% with slight increase in the lattice strain from 0.17 to 0.33%. Further, increase in Zr content to 40 at.% leads to increase in the crystallite size to 57 nm due to stabilization of C10Zr7 phase along with the presence of nanocrystalline Cu-Zr phase. A bimodal distribution of grain size was observed from FE-SEM micrograph was attributed to the highest surface roughness in Zr30Cu70 thin films comprised of Cu10Zr7, Cu9Zr2, Cu-Zr intermetallic phases. In-vitro electrochemical behaviors of nano-crystalline Zrx-Cu100-x thin films in simulated body fluid (SBF) were investigated using potentiodynamic polarization studies. Electrochemical impedance spectroscopy (EIS) data fitting by equivalent electrical circuit fit model suggests that inner bulk layer contributes to high bio-corrosion resistance in Zrx-Cu100-x thin films with increase in Zr content. The results of cyto-compatibility assay suggested that Zr-Cu thin film did not introduce cytotoxicity to osteoblast cells, indicating its suitability as a bio-coating for minimally invasive medical devices.