Search

This paper summarized the efforts performed to understand decay heat estimation from existing spent nuclear fuel (SNF), under the auspices of the Working Party on Nuclear Criticality Safety (WPNCS) of the OECD Nuclear Energy Agency. Needs for precise estimations are related to safety, cost, and optimization of SNF handling, storage, and repository. The physical origins of decay heat (a more correct denomination would be decay power) are then introduced, to identify its main contributors (fission products and actinides) and time-dependent evolution. Due to limited absolute prediction capabilities, experimental information is crucial; measurement facilities and methods are then presented, highlighting both their relevance and our need for maintaining the unique current full-scale facility and developing new ones. The third part of this report is dedicated to the computational aspect of the decay heat estimation: calculation methods, codes, and validation. Different approaches and implementations currently exist for these three aspects, directly impacting our capabilities to predict decay heat and to inform decision-makers. Finally, recommendations from the expert community are proposed, potentially guiding future experimental and computational developments. One of the most important outcomes of this work is the consensus among participants on the need to reduce biases and uncertainties for the estimated SNF decay heat. If it is agreed that uncertainties (being one standard deviation) are on average small (less than a few percent), they still substantially impact various applications when one needs to consider up to three standard deviations, thus covering more than 95% of cases. The second main finding is the need of new decay heat measurements and validation for cases corresponding to more modern fuel characteristics: higher initial enrichment, higher average burnup, as well as shorter and longer cooling time. Similar needs exist for fuel types without public experimental data, such as MOX, VVER, or CANDU fuels. A third outcome is related to SNF assemblies for which no direct validation can be performed, representing the vast majority of cases (due to the large number of SNF assemblies currently stored, or too short or too long cooling periods of interest). A few solutions are possible, depending on the application. For the final repository, systematic measurements of quantities related to decay heat can be performed, such as neutron or gamma emission. This would provide indications of the SNF decay heat at the time of encapsulation. For other applications (short- or long-term cooling), the community would benefit from applying consistent and accepted recommendations on calculation methods, for both decay heat and uncertainties. This would improve the understanding of the results and make comparisons easier.

In this work, a study dedicated to the characterization of the neutronics aspect of the Spent Nuclear Fuel (SNF), as part of the European project EURAD (Work Package 8), is presented. Both measured nuclide concentrations from Post Irradiation Examination samples and decay heat from calorimetric measurements are compared to simulations performed by different partners of the project. Based on these detailed studies and data from the published literature, recommendations are proposed with respect to best practices for SNF modelling, as well as biases and uncertainties for a number of important nuclides and the SNF decay heat for a cooling period from 1 to 1000 years. Finally, specific needs are presented for the improvement of current code prediction capabilities.

SFC is a work package in Eurad that investigates issues related to the properties of the spent nuclear fuel in the back-end of the nuclear fuel cycle. Decay heat, nuclide inventory, and fuel integrity (mechanical and otherwise), and not least the related uncertainties, are among the primary focal points of SFC. These have very significant importance for the safety and operational aspect of the back-end. One consequence is the operation economy of the back-end, where deeper understanding and quantification allow for significant optimization, meaning that significant parts of the costs can be reduced. In this paper, SFC is described, and examples of results are presented at about half-time of the work package, which will finish in 2024. The DisCo project started in 2017 and finished in November 2021 and was funded under the Horizon 2020 Euratom program. It investigated if the properties of modern fuel types, namely doped fuel, and MOX, cause any significant difference in the dissolution behavior of the fuel matrix compared with standard fuels. Spent nuclear fuel experiments were complemented with studies on model materials as well as the development of models describing the solid state, the dissolution process, and reactive transport in the near field. This research has improved the understanding of processes occurring at the interface between spent nuclear fuel and aqueous solution, such as redox reactions. Overall, the results show that from a long-term fuel matrix dissolution point of view, there is no significant difference between MOX fuel, Cr+Al-doped fuel, and standard fuels.

The extension of the operating domain of PreussenElektra's Konvoi-type pressurized water reactors (PWRs) beyond the natural end of cycle is known as stretch-out operation. A range of possibilities exists to increase nuclear fuel utilization to continue operation after the boron concentration reaches its dilution limit. The most basic option is to continue operation with constant average moderator temperature, which results in a relatively fast decrease in reactor power. From a fuel utilization point of view, this is the least optimal procedure. In PreussenElektra's PWR fleet, an enhanced operation mode is adopted, leading to a comparatively modest decrease in reactor power and very high utilization of nuclear fuel. Initially, the stretch-out mode provided an option to gain flexibility regarding outage planning. More recently, the stretch-out method has served as a practical approach to optimizing electricity generation costs during the last cycles before the final shutdown as stipulated by law, as operators can extend the cycle length in a range of 30 to 60 days after the natural end of cycle. This paper describes the licensing rationale, the feasibility of this type of operation, and the operating requirements and experience. The system parameters affected by stretch-out operation are discussed. Adjustments of set points of thermal-hydraulic variables in the primary and secondary systems are explained. Licensing requirements for safe reactor operation in stretch-out mode are reviewed. Furthermore, aspects of neutronic and thermal-hydraulic core surveillance are included. After more than 35 years and counting, the methods of increasing fuel utilization are not new, and an evaluation of experience and effectiveness is in order. [ABSTRACT FROM AUTHOR]

Summary: The super‐critical water‐cooled reactor (SCWR) is one of six types of Gen‐IV reactors. Based on the current mature pressurized water reactor technology, it has several advantages, including high conversion ratio, high breeding of nuclear fuel, high thermal efficiency, and a simplified system. However, due to the combination of water coolant and fast neutron spectrum, there is a need to address safety problems caused by the positive void coefficient. The purpose of this paper is to give a study on physical characteristics for the reactor core. Herein, the core modeling of an SCWR with a single‐pass flow is that seed assemblies and blanket assemblies are arranged in a tornado manner, in which MCNP and SERPENT are used for critical calculation. The assembly design is discussed from the aspects of the thickness of the solid moderator layer and cladding material. Based on the optimized assembly design, UO2, PuO2‐ThO2, and PuO2‐UO2 are selected for the sensitivity analysis of fuel composition. In addition, sensitivity analysis for axial coolant density distribution, water‐to‐fuel volume ratio, reflector thickness and fuel arrangement are carried out. Several fundamental system characteristics are discussed in this paper, including keff, void coefficient, Doppler coefficient, neutron spectrum, power distribution, one‐cycle burnup and conversion ratio. The results help in understanding the design of the SCWR better and provide fundamental research data for further study. [ABSTRACT FROM AUTHOR]