Search

We could demonstrate that the AAA+ unfoldase ClpC together with the protein arginine kinase and adaptor protein McsB, its activator McsA and the phosphatase YwlE form a unique chaperone system. Here, the McsA-activated McsB phosphorylates and targets aggregated substrate proteins for extraction and unfolding by ClpC. Sub-stoichiometric amounts of the YwlE phosphatase enhanced the ClpC/McsB/McsA mediated disaggregation and facilitated the de-phosphorylation of the arginine-phosphorylated substrate protein extruded by ClpC, allowing its subsequent refolding. Interestingly, the successfully refolded protein escaped degradation by the loosely associated ClpP protease. This unique chaperone system is thereby able to disaggregate and refold aggregated proteins but can also remove severely damaged protein aggregates by degradation.

Amine transaminase (ATA) catalyse enantioselectively the direct amination of ketones, but insufficient stability during catalysis limits their industrial applicability. Recently, we revealed that ATAs suffer from substrate-induced inactivation mechanism involving dissociation of the enzyme-cofactor intermediate. Here, we report on engineering the cofactor-ring-binding element, which also shapes the active-site entrance. Only two point mutations in this motif improved temperature and catalytic stability in both biphasic media and organic solvent. Thermodynamic analysis revealed a higher melting point for the enzyme-cofactor intermediate. The high cofactor affinity eliminates the need for pyridoxal 5′-phosphate supply, thus making large-scale reactions more cost effective. This is the first report on stabilising a tetrameric ATA by mutating a single structural element. As this structural "hotspot" is a common feature of other transaminases it could serve as a general engineering target. (Less)

Chondroadherin (CHAD) is a cartilage matrix protein that mediates the adhesion of isolated chondrocytes. Its protein core is composed of 11 leucine-rich repeats (LRR) flanked by cysteine-rich domains. CHAD makes important interactions with collagen as well as with cell-surface heparin sulfate proteoglycans and α2β1integrins. The integrin-binding site is located in a region of hitherto unknown structure at the C-terminal end of CHAD. Peptides based on the C-terminal human CHAD (hCHAD) sequence have shown therapeutic potential for treating osteoporosis. This article describes a still-unconventional structure solution by phasing withde novomodels, the first of a β-rich protein. Structure determination of hCHAD using traditional, though nonsystematic, molecular replacement was unsuccessful in the hands of the authors, possibly owing to a combination of low sequence identity to other LRR proteins, four copies in the asymmetric unit and weak translational pseudosymmetry. However, it was possible to solve the structure by generating a large number ofde novomodels for the central LRR domain usingRosettaand multiple parallel molecular-replacement attempts usingAMPLE. The hCHAD structure reveals an ordered C-terminal domain belonging to the LRRCT fold, with the integrin-binding motif (WLEAK) being part of a regular α-helix, and suggests ways in which experimental therapeutic peptides can be improved. The crystal structure itself and docking simulations further support that hCHAD dimers form in a similar manner to other matrix LRR proteins.

Homomeric coiled-coils can self-assemble into a wide range of structural states with different helix topologies and oligomeric states. In this study, we have combined de novo structure modeling with stability calculations to simultaneously predict structure and oligomeric states of homomeric coiled-coils. For dimers an asymmetric modeling protocol was developed. Modeling without symmetry constraints showed that backbone asymmetry is important for the formation of parallel dimeric coiled-coils. Collectively, our results demonstrate that high-resolution structure of coiled-coils, as well as parallel and antiparallel orientations of dimers and tetramers, can be accurately predicted from sequence. De novo modeling was also used to generate models of competing oligomeric states, which were used to compare stabilities and thus predict the native stoichiometry from sequence. In a benchmark set of 33 coiled-coil sequences, forming dimers to pentamers, up to 70% of the oligomeric states could be correctly predicted. The calculations demonstrated that the free energy of helix folding could be an important factor for determining stability and oligomeric state of homomeric coiled-coils. The computational methods developed here should be broadly applicable to studies of sequence-structure relationships in coiled-coils and the design of higher order assemblies with improved oligomerization specificity.

The Plasmodium falciparum Pfs25 protein (Pfs25) is a leading malaria transmission-blocking vaccine antigen. Pfs25 vaccination is intended to elicit antibodies that inhibit parasite development when ingested by Anopheles mosquitoes during blood meals. The Pfs25 three-dimensional structure has remained elusive, hampering a molecular understanding of its function and limiting immunogen design. We report six crystal structures of Pfs25 in complex with antibodies elicited by immunization via Pfs25 virus-like particles in human immunoglobulin loci transgenic mice. Our structural findings reveal the fine specificities associated with two distinct immunogenic sites on Pfs25. Importantly, one of these sites broadly overlaps with the epitope of the well-known 4B7 mouse antibody, which can be targeted simultaneously by antibodies that target a non-overlapping site to additively increase parasite inhibition. Our molecular characterization of inhibitory antibodies informs on the natural disposition of Pfs25 on the surface of ookinetes and provides the structural blueprints to design next-generation immunogens., Plasmodium falciparum protein Pfs25 is a promising malaria transmission blocking vaccine antigen. Here, Scally et al. determine the crystal structure of Pfs25 and identify antigenic sites that are recognized by transmission-blocking antibodies elicited in human immunoglobulin loci transgenic mice.

The insufficient operational stability of amine transaminases (ATA) constitutes a limiting factor for high productivity in chiral amine synthesis. In this work, we investigated the operational stability of a tetrameric ATA with 92% sequence identity to a Pseudomonas sp. transaminase and compared it to the two commonly used dimeric ATAs from Chromobacterium violaceum and Vibrio fluvialis. In the presence of substrate, all three ATAs featured reduced stability in comparison to their resting stability, but the tetramer showed slower inactivation rates than the dimeric ATAs. Kinetic and thermodynamic analysis revealed an amine donor induced inactivation mechanism involving accumulation of the less stable aminated enzyme cofactor intermediate. Dissociation of the enzyme PMP complex forms the unstable apoenzyme, which can rapidly unfold. Crystal structure analysis shed light on the structure function relationship suggesting that the cofactor ring binding element is stabilized in the quaternary structure conferring higher operational stability by minimizing PMP leakage and apoenzyme formation. In contrast to the common practice, increasing the amine acceptor content improved the stability and substrate turnover of dimeric ATAs. An extra supply of the pyridoxal cofactor (PLP) enhanced the stability of dimeric and tetrameric ATAs but reduced the transamination activity. The ATA inactivation mechanism described here provides valuable aspects for both process development and protein engineering.

Structure-based protein design offers a possibility of optimizing the overall shape of engineered binding scaffolds to match their targets better. We developed a computational approach for the structure-based design of repeat proteins that allows for adjustment of geometrical features like length, curvature, and helical twist. By combining sequence optimization of existing repeats and de novo design of capping structures, we designed leucine-rich repeats (LRRs) from the ribonuclease inhibitor (RI) family that assemble into structures with a predefined geometry. The repeat proteins were built from self-compatible LRRs that are designed to interact to form highly curved and planar assemblies. We validated the geometrical design approach by engineering a ring structure constructed from 10 self-compatible repeats. Protein design can also be used to increase our structural understanding of repeat proteins. We use our design constructs to demonstrate that buried Cys play a central role for stability and folding cooperativity in RI-type LRR proteins. The computational procedure presented here may be used to develop repeat proteins with various geometrical shapes for applications where greater control of the interface geometry is desired.

Summary Recent advances in single-particle cryo-electron microscopy (cryoEM) have resulted in determination of an increasing number of protein structures with resolved glycans. However, existing protocols for the refinement of glycoproteins at low resolution have failed to keep up with these advances. As a result, numerous deposited structures contain glycan stereochemical errors. Here, we describe a Rosetta-based approach for both cryoEM and X-ray crystallography refinement of glycoproteins that is capable of correcting conformational and configurational errors in carbohydrates. Building upon a previous Rosetta framework, we introduced additional features and score terms enabling automatic detection, setup, and refinement of glycan-containing structures. We benchmarked this approach using 12 crystal structures and showed that glycan geometries can be automatically improved while maintaining good fit to the crystallographic data. Finally, we used this method to refine carbohydrates of the human coronavirus NL63 spike glycoprotein and of an HIV envelope glycoprotein, demonstrating its usefulness for cryoEM refinement.

New protein design methods are needed to further improve the development of protein-binding scaffolds. Repeat proteins are linear tandem arrays of structurally similar building blocks, and they are established platforms for engineering proteins inhibitors and biosensors. However, current sequence-based engineering approaches lack the possibility of customizing the overall shape of a binder to its target molecule. Structure-based protein design offers a possibility of optimizing the overall shape of engineered binding scaffolds to better match their targets. We developed a protocol for the computational design of shape-optimized binding scaffolds that can better match their targets. By combining sequence optimization of existing repeats and de novo design of capping structures, we designed leucine-rich repeat (LRR) proteins where the building blocks assemble with a novel geometry. We validated the geometric design approach by engineering an artificial donut-like ring structure constructed from ten self-compatible repeats. Characterization of the design constructs revealed that buried cysteines play a central role for stability and folding cooperativity in certain LRR proteins. This may be used to selectively stabilize or destabilize specific parts of a protein. The computational procedure may now be employed to develop repeat proteins with various geometrical shapes for applications where greater control of the interface geometry is desired.

Models generated byde novostructure prediction can be very useful starting points for molecular replacement for systems where suitable structural homologues cannot be readily identified. Protein–protein complexes andde novo-designed proteins are examples of systems that can be challenging to phase. In this study, the potential ofde novomodels of protein complexes for use as starting points for molecular replacement is investigated. The approach is demonstrated using homomeric coiled-coil proteins, which are excellent model systems for oligomeric systems. Despite the stereotypical fold of coiled coils, initial phase estimation can be difficult and many structures have to be solved with experimental phasing. A method was developed for automatic structure determination of homomeric coiled coils from X-ray diffraction data. In a benchmark set of 24 coiled coils, ranging from dimers to pentamers with resolutions down to 2.5 Å, 22 systems were automatically solved, 11 of which had previously been solved by experimental phasing. The generated models contained 71–103% of the residues present in the deposited structures, had the correct sequence and had freeRvalues that deviated on average by 0.01 from those of the respective reference structures. The electron-density maps were of sufficient quality that only minor manual editing was necessary to produce final structures. The method, namedCCsolve, combines methods forde novostructure prediction, initial phase estimation and automated model building into one pipeline.CCsolveis robust against errors in the initial models and can readily be modified to make use of alternative crystallographic software. The results demonstrate the feasibility ofde novophasing of protein–protein complexes, an approach that could also be employed for other small systems beyond coiled coils.

Homomeric coiled-coils can self-assemble into a wide range of structural states with different helix topologies and oligomeric states. In this study, we have combined de novo structure modeling with stability calculations to simultaneously predict structure and oligomeric states of homomeric coiled-coils. For dimers an asymmetric modeling protocol was developed. Modeling without symmetry constraints showed that backbone asymmetry is important for the formation of parallel dimeric coiled-coils. Collectively, our results demonstrate that high-resolution structure of coiled-coils, as well as parallel and antiparallel orientations of dimers and tetramers, can be accurately predicted from sequence. De novo modeling was also used to generate models of competing oligomeric states, which were used to compare stabilities and thus predict the native stoichiometry from sequence. In a benchmark set of 33 coiled-coil sequences, forming dimers to pentamers, up to 70% of the oligomeric states could be correctly predicted. The calculations demonstrated that the free energy of helix folding could be an important factor for determining stability and oligomeric state of homomeric coiled-coils. The computational methods developed here should be broadly applicable to studies of sequence-structure relationships in coiled-coils and the design of higher order assemblies with improved oligomerization specificity.

The mucosal immune system identifies and fights invading pathogens, while allowing non-pathogenic organisms to persist. Mechanisms of pathogen/non-pathogen discrimination are poorly understood, as is the contribution of human genetic variation in disease susceptibility. We describe here a new, IRF3-dependent signaling pathway that is critical for distinguishing pathogens from normal flora at the mucosal barrier. Following uropathogenic E. coli infection, Irf3−/− mice showed a pathogen-specific increase in acute mortality, bacterial burden, abscess formation and renal damage compared to wild type mice. TLR4 signaling was initiated after ceramide release from glycosphingolipid receptors, through TRAM, CREB, Fos and Jun phosphorylation and p38 MAPK-dependent mechanisms, resulting in nuclear translocation of IRF3 and activation of IRF3/IFNβ-dependent antibacterial effector mechanisms. This TLR4/IRF3 pathway of pathogen discrimination was activated by ceramide and by P-fimbriated E. coli, which use ceramide-anchored glycosphingolipid receptors. Relevance of this pathway for human disease was supported by polymorphic IRF3 promoter sequences, differing between children with severe, symptomatic kidney infection and children who were asymptomatic bacterial carriers. IRF3 promoter activity was reduced by the disease-associated genotype, consistent with the pathology in Irf3−/− mice. Host susceptibility to common infections like UTI may thus be strongly influenced by single gene modifications affecting the innate immune response., Author Summary The host immune system must identify pathogens and defeat them through TLR-dependent signaling pathway activation, while distinguishing them from commensal flora. Contrary to current dogma, the host cannot solely use “pattern recognition” since the microbial molecules involved in such recognition are present on pathogens and commensals alike. We identify here a pathogen-specific mechanism of TLR4 activation and signaling intermediates in this pathway, leading to IRF3-dependent transcription of innate immune response genes. We show in knockout mice that Irf3 deficiency causes severe tissue pathology and that effector functions controlled by IFNβ are involved. Finally, in highly disease-prone pyelonephritis patients we found a high frequency of IRF3 promoter polymorphism compared to asymptomatic bacterial carriers or controls. The polymorphisms influenced promoter activity in reporter assays, suggesting that they are functionally important. Urinary tract infections are among the most common bacterial infections in man, and are a major cause of morbidity and mortality. A subset of disease-prone individuals is at risk for recurrent disease, severe renal dysfunction and end-stage renal disease. At present, there is no method to identify disease-prone infants and to prevent future morbidity and renal damage. The genetic and functional studies described here indicate that genetic variation in IRF3 influences individual susceptibility to kidney infection and might serve as a new tool for future risk assessment in this patient group.

The susceptibility to urinary tract infection (UTI) is controlled by the innate immune response and Toll like receptors (TLRs) are the sentinels of this response. If productive, TLR4 signalling may initiate the symptomatic disease process. In the absence of TLR4 signalling the infected host instead develops an asymptomatic carrier state. The activation of mucosal TLR4 is also influenced by the properties of the infecting strain, and pathogens use their virulence factors to trigger 'pathogen-specific' TLR4 responses in the urinary tract but do not respond to the asymptomatic carrier strains in patients with asymptomatic bacteriuria (ABU). The TLR4 dependence has been demonstrated in mice and the relevance of low TLR4 function for protection for human disease was recently confirmed in children with asymptomatic bacteriuria, who expressed less TLR4 than age matched controls. Functional chemokines and functional chemokine receptors are crucial for neutrophil recruitment, and for the neutrophil dependent bacterial clearance. Interleukin (IL)-8 receptor deficient mice develop acute septic infections and chronic tissue damage, due to aberrant neutrophil function. This mechanism is relevant for human UTI as pyelonephritis prone children express low levels of the human CXCL8 (Il-8) receptor, CXC chemokine receptor 1 (CXCR1) and often have heterozygous CXCR1 polymorphisms. This review illustrates how intimately the innate response and the susceptibility to UTI are linked and sophisticated recognition mechanisms that rely on microbial virulence and on host TLR4 and CXCR1 signalling.