Search

Given the central role of conformational dynamics in protein function, it is essential to characterize the time scales and structures associated with these transitions. High pressure (HP) perturbation favors transitions to excited states because they typically occupy a smaller molar volume, thus facilitating characterization of conformational dynamics. Repeat proteins, with their straightforward architecture, provide good models for probing the sequence dependence of protein conformational dynamics. Investigations of chemical exchange by

In this study, NMR and molecular dynamics simulations were employed to study IgG1 FC binding to multimodal surfaces. Gold nanoparticles functionalized with two multimodal cation-exchange ligands (Capto and Nuvia) were synthesized and employed to carry out solution-phase NMR experiments with the FC. Experiments with perdeuterated 15N-labeled FC and the multimodal surfaces revealed micromolar residue-level binding affinities as compared to millimolar binding affinities with these ligands in free solution, likely due to cooperativity and avidity effects. The binding of FC with the Capto ligand nanoparticles was concentrated near an aliphatic cluster in the CH2/CH3 interface, which corresponded to a focused hydrophobic region. In contrast, binding with the Nuvia ligand nanoparticles was more diffuse and corresponded to a large contiguous positive electrostatic potential region on the side face of the FC. Results with lower-ligand-density nanoparticles indicated a decrease in binding affinity for both systems. For the Capto ligand system, several aliphatic residues on the FC that were important for binding to the higher-density surface did not interact with the lower-density nanoparticles. In contrast, no significant difference was observed in the interacting residues on the FC to the high- and low-ligand density Nuvia surfaces. The binding affinities of FC to both multimodal-functionalized nanoparticles decreased in the presence of salt due to the screening of multiple weak interactions of polar and positively charged residues. For the Capto ligand nanoparticle system, this resulted in an even more focused hydrophobic binding region in the interface of the CH2 and CH3 domains. Interestingly, for the Nuvia ligand nanoparticles, the presence of salt resulted in a large transition from a diffuse binding region to the same focused binding region determined for Capto nanoparticles at 150 mM salt. Molecular dynamics simulations corroborated the NMR results and provided important insights into the molecular basis of FC binding to these different multimodal systems containing clustered (observed at high-ligand densities) and nonclustered ligand surfaces. This combined biophysical and simulation approach provided significant insights into the interactions of FC with multimodal surfaces and sets the stage for future analyses with even more complex biotherapeutics.

The chemoenzymatic synthesis of heparin, through a multienzyme process, represents a critical challenge in providing a safe and effective substitute for this animal-sourced anticoagulant drug. D-glucuronyl C5-epimerase (C5-epi) is an enzyme acting on a heparin precursor, N-sulfoheparosan, catalyzing the reversible epimerization of D-glucuronic acid (GlcA) to L-iduronic acid (IdoA). The absence of reliable assays for C5-epi has limited elucidation of the enzymatic reaction and kinetic mechanisms. Real time and offline assays are described that rely on 1D 1H NMR to study the activity of C5-epi. Apparent steady-state kinetic parameters for both the forward and the pseudo-reverse reactions of C5-epi are determined for the first time using polysaccharide substrates directly relevant to the chemoenzymatic synthesis and biosynthesis of heparin. The forward reaction shows unusual sigmoidal kinetic behavior, and the pseudo-reverse reaction displays nonsaturating kinetic behavior. The atypical sigmoidal behavior of the forward reaction was probed using a range of buffer additives. Surprisingly, the addition of 25 mM each of CaCl2 and MgCl2 resulted in a forward reaction exhibiting more conventional Michaelis–Menten kinetics. The addition of 2-O-sulfotransferase, the next enzyme involved in heparin synthesis, in the absence of 3′-phosphoadenosine 5′-phosphosulfate, also resulted in C5-epi exhibiting a more conventional Michaelis–Menten kinetic behavior in the forward reaction accompanied by a significant increase in apparent Vmax. This study provides critical information for understanding the reaction kinetics of C5-epi, which may result in improved methods for the chemoenzymatic synthesis of bioengineered heparin.

Poly(pentadecalactone)

In this study, NMR and molecular dynamics simulations were employed to study IgG1 F

Cnidarian fluorescent protein (FP) derivatives such as GFP, mCherry, and mEOS2 have been widely used to monitor gene expression and protein localization through biological imaging because they are considered functionally inert. We demonstrate that FPs specifically bind amyloid fibrils formed from many natural peptides and proteins. FPs do not bind other nonamyloid fibrillar structures such as microtubules or actin filaments and do not bind to amorphous aggregates. FPs can also bind small aggregates formed during the lag phase and early elongation phase of fibril formation and can inhibit amyloid fibril formation in a dose-dependent manner. These findings suggest caution should be taken in interpreting FP-fusion protein localization data when amyloid structures may be present. Given the pathological significance of amyloid-related species in some diseases, detection and inhibition of amyloid fibril formation using FPs can provide insights on developing diagnostic tools.

In this study, the binding of multimodal chromatographic ligands to the IgG1 FC domain were studied using nuclear magnetic resonance and molecular dynamics simulations. Nuclear magnetic resonance experiments carried out with chromatographic ligands and a perdeuterated 15N-labeled FC domain indicated that while single mode ion exchange ligands interacted very weakly throughout the FC surface, multimodal ligands interacted with specific clusters of residues with relatively high affinity, forming distinct binding regions on the Fc. The multimodal ligand binding sites on the FC were concentrated in the hinge region and near the interface of the CH2 and CH3 domains. Further, the multimodal binding sites were primarily composed of positively charged, polar and aliphatic residues in these regions, with histidine residues exhibiting some of the strongest binding affinities with the multimodal ligand. Interestingly, comparison of protein surface property data with ligand interaction sites indicated that the patch analysis on FC corroborated molecular level binding information obtained from the nuclear magnetic resonance experiments. Finally, molecular dynamics simulation results were shown to be qualitatively consistent with the nuclear magnetic resonance results and to provide further insights into the binding mechanisms. An important contribution to multimodal ligand-FC binding in these preferred regions was shown to be electrostatic interactions and pi-pi stacking of surface exposed histidines with the ligands. This combined biophysical and simulation approach has provided a deeper molecular level understanding of multimodal ligand-FC interactions and sets the stage for future analyses of even more complex biotherapeutics.

In this study, the binding of multimodal chromatographic ligands to the IgG1 F

Osteoarthritis (OA) is a degenerative joint disease resulting in the deterioration of articular cartilage, a tissue with minimal ability to self-repair. Early diagnosis of OA with non-invasive imaging techniques such as magnetic resonance imaging (MRI) could provide an opportunity to intervene and slow or reverse this degeneration process. This study examines the classification of degradation states using MRI measurements. Enzymatic degradation was used to specifically target proteoglycans alone, collagen alone and both cartilage components sequentially. The resulting degradation was evaluated using MRI imaging techniques (T1, T2, diffusion tensor imaging, and gadolinium enhanced T1) and derived measures of water, glycosaminoglycan and collagen content. We compared the classification ability of full thickness averages of these parameters with zonal averages (superficial, medial, and deep). Finally, we determined minimum variables sets to identify the smallest number of variables that allowed for complete separation of all degradation groups and ranked them by impact on the separation. Zonal analysis was much more sensitive than full thickness averages and allowed perfect separation of all four groups. Superficial zone cartilage was more sensitive to enzymatic degradation than the medial or deep zone, or the full thickness average. Variable ranking consistently identified collagen content and organization as the most impactful variables in the classification algorithm. The aim of this study is to classify cartilage degradation using only non-invasive MRI parameters that could be applied to OA diagnosis. Our results highlight the importance of zonal variation in the diagnosis of cartilage degeneration. Our novel, non-invasive collagen content measurement was crucial for complete separation of degraded groups from control cartilage. These findings have significant implications for clinical cartilage MRI for disease diagnosis.

Host defense peptides (HDPs) feature evolution-tested potency against life-threatening pathogens. While piscidin 1 (p1) and piscidin 3 (p3) are homologous and potent fish HDPs, only p1 is strongly membranolytic. Here, we hypothesize that another mechanism imparts p3 strong potency. We demonstrate that the N-termini of both peptides coordinate Cu2+ and p3-Cu cleaves isolated DNA at a rate on par with free Cu2+ but significantly faster than p1-Cu. On planktonic bacteria, p1 is more antimicrobial but only p3 features copper-dependent DNA cleavage. On biofilms and persister cells, p3-Cu is more active than p1-Cu, commensurate with stronger peptide-induced DNA damage. Molecular dynamics and NMR show that more DNA-peptide interactions exist with p3 than p1, and the peptides adopt conformations simultaneously poised for metal- and DNA-binding. These results generate several important conclusions. First, homologous HDPs cannot be assumed to have identical mechanisms since p1 and p3 eradicate bacteria through distinct relative contributions of membrane and DNA-disruptive effects. Second, the nuclease and membrane activities of p1 and p3 show that naturally-occurring HDPs can inflict not only physicochemical but also covalent damage. Third, strong nuclease activity is essential for biofilm and persister cell eradication, as shown by p3, the homolog more specific towards bacteria and more expressed in vascularized tissues. Fourth, p3 combines several physicochemical properties (e.g. ATCUN motif; numerous arginines; moderate hydrophobicity) that confer low membranolytic effects, robust copper-scavenging capability, strong interactions with DNA, and fast nuclease activity. This new knowledge could help design novel therapeutics active against hard-to-treat persister cells and biofilms. This article is protected by copyright. All rights reserved.

A complete description of the pathways and mechanisms of protein folding requires a detailed structural and energetic characterization of the conformational ensemble along the entire folding reaction coordinate. Simulations can provide this level of insight for small proteins. In contrast, with the exception of hydrogen exchange, which does not monitor folding directly, experimental studies of protein folding have not yielded such structural and energetic detail. NMR can provide residue specific atomic level structural information, but its implementation in protein folding studies using chemical or temperature perturbation is problematic. Here we present a highly detailed structural and energetic map of the entire folding landscape of the leucine-rich repeat protein, pp32 (Anp32), obtained by combining pressure-dependent site-specific 1H-15N HSQC data with coarse-grained molecular dynamics simulations. The results obtained using this equilibrium approach demonstrate that the main barrier to folding of pp32 is quite broad and lies near the unfolded state, with structure apparent only in the C-terminal region. Significant deviation from two-state unfolding under pressure reveals an intermediate on the folded side of the main barrier in which the N-terminal region is disordered. A nonlinear temperature dependence of the population of this intermediate suggests a large heat capacity change associated with its formation. The combination of pressure, which favors the population of folding intermediates relative to chemical denaturants; NMR, which allows their observation; and constrained structure-based simulations yield unparalleled insight into protein folding mechanisms.

Despite attractive properties of cellulose nanocrystals (CNCs) such as high natural abundance, inherent biodegradability and high modulus, CNCs tend to degrade and aggregate when exposed to high temperatures during melt processing. In the present work, the surface of CNCs was modified with PMMA to take advantage of the miscibility with various biobased polymers including PLLA when melt-blended. Particular attention was paid to grafting techniques in water medium using two different redox initiators: Fe2+/H2O2 (Fenton’s reagent) and ceric ammonium nitrate (CAN). The successful synthesis of CNC-g-PMMA was verified by gravimetric analysis, FTIR, CP-MAS 13C NMR and suspension tests. A high grafting efficiency of 77% was achieved using CAN as the redox initiator. Increasing the PMMA content on CNC surfaces led to higher CNC thermal stability. As a consequence of PMMA grafting in water, modified CNCs were found to be predispersed in a PMMA network. PLLA/CNC nanocomposites were then prepared by melt-blending, i....

Understanding human mobility within urban settings is fundamental for urban and transport planning. Travel demand modeling and planning typically rely on data that are collected from large-scale household travel surveys (i.e., origin–destination surveys) and compiled into single- or multiple-day travel diaries. The laborious task of collecting these data has left traditional methods with numerous limitations, resulting in significant trade-offs in regard to accuracy, sample size, and study duration, while also being vulnerable to reporting and transcription error. Rising mobile phone ownership has provided opportunities to acquire expansive cellular network data from service providers and location-based service data through smartphone applications. At the same time, the Google Maps smartphone application provides built-in infrastructure that can passively collect detailed location information from user smartphone devices. The resulting data are known as Google location history (GLH). To better understand the potential of these data offerings in transportation modeling and planning, GLH data passively collected from five different smartphones following prescribed itineraries over 12 days was evaluated. As 51% of 934 locations and 32% of 888 trips were matched to the pre-determined travel diary data, it was determined that GLH data does not currently appear to be an adequate tool for travel diary data collection. On average, locations that were missed by GLH were shorter (mean of 355 s), whereas locations that were identified were longer (mean of 762 s).

The observation of two-state unfolding for many small single-domain proteins by denaturants has led to speculation that protein sequences may have evolved to limit the population of partially folded states that could be detrimental to fitness. How such strong cooperativity arises from a multitude of individual interactions is not well understood. Here, we investigate the stability and folding cooperativity of the C-terminal domain of the ribosomal protein L9 in the pressure-temperature plane using site-specific NMR. In contrast to apparent cooperative unfolding detected with denaturant-induced and thermal-induced unfolding experiments and stopped-flow refolding studies at ambient pressure, NMR-detected pressure unfolding revealed significant deviation from two-state behavior, with a core region that was selectively destabilized by increasing temperature. Comparison of pressure-dependent NMR signals from both the folded and unfolded states revealed the population of at least one invisible excited state at atmospheric pressure. The core destabilizing cavity-creating I98A mutation apparently increased the cooperativity of the loss of folded-state peak intensity while also increasing the population of this invisible excited state present at atmospheric pressure. These observations highlight how local stability is subtly modulated by sequence to tune protein conformational landscapes and illustrate the ability of pressure- and temperature-dependent studies to reveal otherwise hidden states.

The effect of introducing internal cavities on protein native structure and global stability has been well documented, but the consequences of these packing defects on folding free-energy landscapes have received less attention. We investigated the effects of cavity creation on the folding landscape of the leucine-rich repeat protein pp32 by high-pressure (HP) and urea-dependent NMR and high-pressure small-angle X-ray scattering (HPSAXS). Despite a modest global energetic perturbation, cavity creation in the N-terminal capping motif (N-cap) resulted in very strong deviation from two-state unfolding behavior. In contrast, introduction of a cavity in the most stable, C-terminal half of pp32 led to highly concerted unfolding, presumably because the decrease in stability by the mutations attenuated the N- to C-terminal stability gradient present in WT pp32. Interestingly, enlarging the central cavity of the protein led to the population under pressure of a distinct intermediate in which the N-cap and repeats 1–4 were nearly completely unfolded, while the fifth repeat and the C-terminal capping motif remained fully folded. Thus, despite modest effects on global stability, introducing internal cavities can have starkly distinct repercussions on the conformational landscape of a protein, depending on their structural and energetic context.

Cellulose nanocrystals (CNCs) were modified with natural di- and tricarboxylic acids using two concurrent acid-catalyzed reactions including hydrolysis of amorphous cellulose segments and Fischer esterification, resulting in the introduction of free carboxylic acid functionality onto CNC surfaces. CNC esterification was characterized by Fourier transform infrared spectroscopy, 13C solid state magic-angle spinning (MAS), and conductometric titration experiments. Average degree of substitution values for malonate, malate, and citrate CNCs are 0.16, 0.22, and 0.18, respectively. Despite differences in organic acid pKa, optimal HCl cocatalyst concentrations were similar for malonic, malic, and citric acids. After isolation of modified CNCs, residual cellulose coproducts were identified that are similar to microcrystalline cellulose based on SEM and XRD analysis. As proof of concept, recycling experiments were carried to increase the yield of citrate CNCs. The byproduct was then recycled by subsequent citric a...

Plant polyphenols are known to have varying antimicrobial potencies, including direct antibacterial activity, synergism with antibiotics and suppression of bacterial virulence. We performed the in vitro oligomerization of resveratrol catalyzed by soybean peroxidase, and the two isomers (resveratrol-trans-dihydrodimer and pallidol) produced were tested for antimicrobial activity. The resveratrol-trans-dihydrodimer displayed antimicrobial activity against the Gram-positive bacteria Bacillus cereus, Listeria monocytogenes, and Staphylococcus aureus (minimum inhibitory concentration (MIC) = 15.0, 125, and 62.0 μM, respectively) and against Gram-negative Escherichia coli (MIC = 123 μM, upon addition of the efflux pump inhibitor Phe-Arg-β-naphthylamide). In contrast, pallidol had no observable antimicrobial activity against all tested strains. Transcriptomic analysis implied downregulation of ABC transporters, genes involved in cell division and DNA binding proteins. Flow cytometric analysis of treated cells revealed a rapid collapse in membrane potential and a substantial decrease in total DNA content. The active dimer showed >90% inhibition of DNA gyrase activity, in vitro, by blocking the ATP binding site of the enzyme. We thus propose that the resveratrol-trans-dihydrodimer acts to: (1) disrupt membrane potential; and (2) inhibit DNA synthesis. In summary, we introduce the mechanisms of action and the initial evaluation of an active bactericide, and a platform for the development of polyphenolic antimicrobials.

Poly(pentadecalactone)-b-poly(l-lactide) (PPDL-b-PLLA) diblock copolymers were prepared via the organic catalyzed ring-opening polymerization (ROP) of l-lactide (l-LA) from PPDL macroinitiators using either 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) or 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). Synthesis of PLLA blocks targeting degrees of polymerization (DP) up to 500 were found to yield diblock copolymers with crystalline PPDL and PLLA segments when TBD was used as the catalyst. The synthesis was further improved in a one-pot, two-step process using the same TBD catalyst for the synthesis of both segments. The application of these diblock copolymers as a compatibilizing agents resulted in homogenization of a biobased PLLA/poly(ω-hydroxytetradecanoate) (90:10) blend upon a melt-process, yielding enhanced material properties.

Many repeat proteins contain capping motifs, which serve to shield the hydrophobic core from solvent and maintain structural integrity. While the role of capping motifs in enhancing the stability and structural integrity of repeat proteins is well documented, their contribution to folding cooperativity is not. Here we examined the role of capping motifs in defining the folding cooperativity of the leucine-rich repeat protein, pp32, by monitoring the pressure- and urea-induced unfolding of an N-terminal capping motif (N-cap) deletion mutant, pp32-∆N-cap, and a C-terminal capping motif destabilization mutant pp32-Y131F/D146L, using residue-specific NMR and small-angle X-ray scattering. Destabilization of the C-terminal capping motif resulted in higher cooperativity for the unfolding transition compared to wild-type pp32, as these mutations render the stability of the C-terminus similar to that of the rest of the protein. In contrast, deletion of the N-cap led to strong deviation from two-state unfolding. In both urea- and pressure-induced unfolding, residues in repeats 1–3 of pp32-ΔN-cap lost their native structure first, while the C-terminal half was more stable. The residue-specific free energy changes in all regions of pp32-ΔN-cap were larger in urea compared to high pressure, indicating a less cooperative destabilization by pressure. Moreover, in contrast to complete structural disruption of pp32-ΔN-cap at high urea concentration, its pressure unfolded state remained compact. The contrasting effects of the capping motifs on folding cooperativity arise from the differential local stabilities of pp32, whereas the contrasting effects of pressure and urea on the pp32-ΔN-cap variant arise from their distinct mechanisms of action.

Biofuels and biomaterials, produced from lignocellulosic feedstock, require facile access to cellulose and hemicellulose to be competitive with petroleum processing and sugar-based fermentation. Physical-chemical barriers resulting from lignin complicates the hydrolysis biomass into fermentable sugars. Thus, the amount of lignin within a substrate is critical in determining biomass processing. The application of 13C cross-polarization, magic-angle spinning, and solid-state nuclear magnetic resonance for the direct quantification of lignin content in biomass is examined. Using a standard curve constructed from pristine lignin and cellulose, the lignin content of a biomass sample is accurately determined through direct measurement without chemical or enzymatic pre-treatment.

Guanosine monophosphate, among the nucleotides, has the unique property to self-associate and form nanoscale cylinders consisting of hydrogen-bonded G-quartet disks, which are stacked on top of one another. Such self-assemblies describe not only the basic structural motif of G-quadruplexes formed by, e.g., telomeric DNA sequences, but are also interesting targets for supramolecular chemistry and nanotechnology. The G-quartet stacks serve as an excellent model to understand the fundamentals of their molecular self-association and to unveil their application spectrum. However, the thermodynamic stability of such self-assemblies over an extended temperature and pressure range is largely unexplored. Here, we report a combined FTIR and NMR study on the temperature and pressure stability of G-quartet stacks formed by disodium guanosine 5′-monophosphate (Na25′-GMP). We found that under abyssal conditions, where temperatures as low as 5 °C and pressures up to 1 kbar are reached, the self-association of Na25′-GMP is most favoured. Beyond those conditions, the G-quartet stacks dissociate laterally into monomer stacks without significantly changing the longitudinal dimension. Among the tested alkali cations, K+ is the most efficient one to elevate the temperature as well as the pressure limits of GMP self-assembly.

Calmodulin (CaM) is a multifunctional messenger protein that activates a wide variety of signaling pathways in eukaryotic cells in a calcium-dependent manner. CaM has been proposed to be functionally distinct from the S100 proteins, a related family of eukaryotic calcium-binding proteins. Previously, it was demonstrated that peptides derived from the actin-capping protein, TRTK12, and the tumor-suppressor protein, p53, interact with multiple members of the S100 proteins. To test the specificity of these peptides, they were screened using isothermal titration calorimetry against 16 members of the human S100 protein family, as well as CaM, which served as a negative control. Interestingly, both the TRTK12 and p53 peptides were found to interact with CaM. These interactions were further confirmed by both fluorescence and nuclear magnetic resonance spectroscopies. These peptides have distinct sequences from the known CaM target sequences. The TRTK12 peptide was found to independently interact with both CaM domains and bind with a stoichiometry of 2:1 and dissociations constants Kd,C-term = 2 ± 1 µM and Kd,N-term = 14 ± 1 µM. In contrast, the p53 peptide was found to interact only with the C-terminal domain of CaM, Kd,C-term =2 ± 1 µM, 25°C. Using NMR spectroscopy, the locations of the peptide binding sites were mapped onto the structure of CaM. The binding sites for both peptides were found to overlap with the binding interface for previously identified targets on both domains of CaM. This study demonstrates the plasticity of CaM in target binding and may suggest a possible overlap in target specificity between CaM and the S100 proteins.

The chemistry of ribonucleotides and other phosphates is extended to include their reactions with potassium fluoride in aqueous solution in the presence of a water soluble carbodiimide. High yields (>98%) of phosphorofluoridates are formed. A combination of HPLC, mass spectrometry, and NMR confirms the identities of the products. The methodology is applied, with equally satisfactory outcomes, to the physiologically active phosphonates Adefovir® and Tenofovir®, providing new compounds. Detailed NMR studies of the new phosphonofluoridates are reported.

We identify specific acylphosphatase (AcP) residues that interact with silica nanoparticles (SNPs) using a combined NMR spectroscopy and proteomics-mass spectrometry approach. AcP associated with 4- and 15-nm diameter SNPs through a common and specific interaction surface formed by amino acids from the two α-helices of the protein. Greater retention of native protein structure was obtained on 4-nm SNPs than on 15-nm particles, presumably due to greater surface curvature-induced protein stabilization with the smaller SNPs. These results demonstrate that proteins may undergo specific and size-dependent orientation on nanoparticle surfaces. Our approach can be broadly applied to various protein-material systems to help understand in much greater detail the protein-nanomaterial interface; it would also encourage better modeling, and thus prediction and design, of the behavior of functional proteins adsorbed onto different surfaces.

Beyond defining the structure and stability of folded states of proteins, primary amino acid sequences determine all of the features of their conformational landscapes. Characterizing how sequence modulates the population of protein excited states or folding pathways requires atomic level detailed structural and energetic information. Such insight is essential for improving protein design strategies, as well as for interpreting protein evolution. Here, high pressure NMR and molecular dynamics simulations were combined to probe the conformational landscape of a small model protein, the tryptophan cage variant, Tc5b. Pressure effects on protein conformation are based on volume differences between states, providing a subtle continuous variable for perturbing conformations. 2D proton TOCSY spectra of Tc5b were acquired as a function of pressure at different temperature, pH, and urea concentration. In contrast to urea and pH which lead to unfolding of Tc5b, pressure resulted in modulation of the structures that are populated within the folded state basin. The results of molecular dynamics simulations on Tc5b displayed remarkable agreement with the NMR data. Principal component analysis identified two structural subensembles in the folded state basin, one of which was strongly destabilized by pressure. The pressure-dependent structural perturbations observed by NMR coincided precisely with the changes in secondary structure associated with the shifting populations in the folded state basin observed in the simulations. These results highlight the deep structural insight afforded by pressure perturbation in conjunction with high resolution experimental and advanced computational tools.

Understanding protein folding mechanisms and their sequence dependence requires the determination of residue-specific apparent kinetic rate constants for the folding and unfolding reactions. Conventional two-dimensional NMR, such as HSQC experiments, can provide residue-specific information for proteins. However, folding is generally too fast for such experiments. ZZ-exchange NMR spectroscopy allows determination of folding and unfolding rates on much faster time scales, yet even this regime is not fast enough for many protein folding reactions. The application of high hydrostatic pressure slows folding by orders of magnitude due to positive activation volumes for the folding reaction. We combined high pressure perturbation with ZZ-exchange spectroscopy on two autonomously folding protein domains derived from the ribosomal protein, L9. We obtained residue-specific apparent rates at 2500 bar for the N-terminal domain of L9 (NTL9), and rates at atmospheric pressure for a mutant of the C-terminal domain (CTL9) from pressure dependent ZZ-exchange measurements. Our results revealed that NTL9 folding is almost perfectly two-state, while small deviations from two-state behavior were observed for CTL9. Both domains exhibited large positive activation volumes for folding. The volumetric properties of these domains reveal that their transition states contain most of the internal solvent excluded voids that are found in the hydrophobic cores of the respective native states. These results demonstrate that by coupling it with high pressure, ZZ-exchange can be extended to investigate a large number of protein conformational transitions.

S100B is a member of the S100 subfamily of EF-hand proteins that has been implicated in malignant melanoma and neurodegenerative conditions such as Alzheimer's disease and Parkinson's disease. Calcium-induced conformational changes expose a hydrophobic binding cleft, facilitating interactions with a wide variety of nuclear, cytoplasmic, and extracellular target proteins. Previously, peptides derived from CapZ, p53, NDR, HDM2, and HDM4 have been shown to interact with S100B in a calcium-dependent manner. However, the thermodynamic and kinetic basis of these interactions remains largely unknown. To gain further insight, we screened these peptides against the S100B protein using isothermal titration calorimetry and nuclear magnetic resonance. All peptides were found to have binding affinities in the low micromolar to nanomolar range. Binding-induced changes in the line shapes of S100B backbone (1)H and (15)N resonances were monitored to obtain the dissociation constants and the kinetic binding parameters. The large microscopic K(on) rate constants observed in this study (≥1 × 10(7) M(-1) s(-1)) suggest that S100B utilizes a "fly casting mechanism" in the recognition of these peptide targets.

This study examines protein adsorption behavior and the effects of mobile phase modifiers in multimodal chromatographic systems. Chromatography results with a diverse protein library indicate that multimodal and ion exchange resins have markedly different protein binding behavior and selectivity. NMR results corroborate the stronger binding observed for the multimodal system and provide insight into the structural basis for the observed binding behavior. Protein-binding affinity and selectivity in multimodal and ion exchange systems are then examined using a variety of mobile phase modifiers. Arginine and guanidine are found to have dramatic effects on protein adsorption, yielding changes in selectivity in both chromatographic systems. While sodium caprylate leads to slightly weaker chromatographic retention for most proteins, certain proteins exhibit significant losses in retention in both systems. The presence of a competitive binding mechanism between the multimodal ligand and sodium caprylate for binding to ubiquitin is confirmed using STD NMR. Polyol mobile phase modifiers are shown to result in increased retention for weakly bound proteins and decreased retention for strongly bound proteins, indicating that the overall retention behavior is determined by a balance between changes in electrostatic and hydrophobic interactions. This work provides an improved understanding of protein adsorption and mobile phase modifier effects in multimodal chromatographic systems and sets the stage for future work to develop more selective protein separation systems.

The structure of the GAG (glycosaminoglycan) chain of recombinantly expressed decorin proteoglycan was examined using a combination of intact-chain analysis and domain compositional analysis. The GAG had a number-average molecular mass of 22 kDa as determined by PAGE. NMR spectroscopic analysis using two-dimensional correlation spectroscopy indicated that the ratio of glucuronic acid to iduronic acid in decorin peptidoglycan was 5 to 1. GAG domains terminated with a specific disaccharide obtained by enzymatic degradation of decorin GAG with highly specific endolytic and exolytic lyases were analysed by PAGE and further depolymerized with the enzymes. The disaccharide compositional profiles of the resulting domains were obtained using LC with mass spectrometric and photometric detection and compared with that of the polysaccharide. The information obtained through the disaccharide compositional profiling was combined with the NMR and PAGE data to construct a map of the decorin GAG sequence motifs.

NMR titration experiments with labeled human ubiquitin were employed in concert with chromatographic data obtained with a library of ubiquitin mutants to study the nature of protein adsorption in multimodal (MM) chromatography. The elution order of the mutants on the MM resin was significantly different from that obtained by ion-exchange chromatography. Further, the chromatographic results with the protein library indicated that mutations in a defined region induced greater changes in protein affinity to the solid support. Chemical shift mapping and determination of dissociation constants from NMR titration experiments with the MM ligand and isotopically enriched ubiquitin were used to determine and rank the relative binding affinities of interaction sites on the protein surface. The results with NMR confirmed that the protein possessed a distinct preferred binding region for the MM ligand in agreement with the chromatographic results. Finally, coarse-grained ligand docking simulations were employed to study the modes of interaction between the MM ligand and ubiquitin. The use of NMR titration experiments in concert with chromatographic data obtained with protein libraries represents a previously undescribed approach for elucidating the structural basis of protein binding affinity in MM chromatographic systems.

Ubiquitin-interacting motifs (UIMs) are an important class of protein domains that interact with ubiquitin or ubiquitin-like proteins. These approximately 20-residue-long domains are found in a variety of ubiquitin receptor proteins and serve as recognition modules towards intracellular targets, which may be individual ubiquitin subunits or polyubiquitin chains attached to a variety of proteins. Previous structural studies of interactions between UIMs and ubiquitin have shown that UIMs adopt an extended structure of a single α-helix, containing a hydrophobic surface with a conserved sequence pattern that interacts with key hydrophobic residues on ubiquitin. In light of this large body of structural studies, details regarding the presence and the roles of structural dynamics and plasticity are surprisingly lacking. In order to better understand the structural basis of ubiquitin–UIM recognition, we have characterized changes in the structure and dynamics of ubiquitin upon binding of a UIM domain from the yeast Vps27 protein. The solution structure of a ubiquitin–UIM fusion protein designed to study these interactions is reported here and found to consist of a well-defined ubiquitin core and a bipartite UIM helix. Moreover, we have studied the plasticity of the docking interface, as well as global changes in ubiquitin due to UIM binding at the picoseconds-to-nanoseconds and microseconds-to-milliseconds protein motions by nuclear magnetic resonance relaxation. Changes in generalized-order parameters of amide groups show a distinct trend towards increased structural rigidity at the UIM–ubiquitin interface relative to values determined in unbound ubiquitin. Analysis of 15N Carr–Purcell–Meiboom–Gill relaxation dispersion measurements suggests the presence of two types of motions: one directly related to the UIM-binding interface and the other induced to distal parts of the protein. This study demonstrates a case where localized interactions among protein domains have global effects on protein motions at timescales ranging from picoseconds to milliseconds.

Protein splicing is a precise autocatalytic process in which an intein excises itself from a precursor with the concomitant ligation of the flanking sequences. Protein splicing occurs through acid-base catalysis in which the ionization states of active site residues are crucial to the reaction mechanism. In inteins, several conserved histidines have been shown to play important roles in protein splicing, including the most conserved "B-block" histidine. In this study, we have combined NMR pK(a) determination with quantum mechanics/molecular mechanics (QM/MM) modeling to study engineered inteins from Mycobacterium tuberculosis (Mtu) RecA intein. We demonstrate a dramatic pK(a) shift for the invariant B-block histidine, the most conserved residue among inteins. The B-block histidine has a pK(a) of 7.3 +/- 0.6 in a precursor and a pK(a) of3.5 in a spliced intein. The pK(a) values and QM/MM data suggest that the B-block histidine has a dual role in the acid-base catalysis of protein splicing. This histidine likely acts as a general base to initiate splicing with an acyl shift and then as a general acid to cause the breakdown of the scissile bond at the N-terminal splicing junction. The proposed pK(a) shift mechanism accounts for the biochemical data supporting the essential role for the B-block histidine and for the near absolute sequence conservation of this residue.

A continuous-jet hydrate reactor originally developed to generate a CO2 hydrate stream has been modified to continuously produce CH4 hydrate. The reactor has been tested in the Seafloor Process Simulator (SPS), a 72-L pressure vessel available at Oak Ridge National Laboratory. During experiments, the reactor was submerged in water inside the SPS and received water from the surrounding through a submersible pump and CH4 externally through a gas booster pump. Thermodynamic conditions in the hydrate stability regime were employed in the experiments. The reactor produced a continuous stream of CH4 hydrate, and based on pressure values and amount of gas injected, the conversion of gas to hydrate was estimated. A conversion of up to 70% was achieved using this reactor.

A parallel batch screening technique was employed to identify chemically selective displacers which exhibited exclusive separation behavior for the protein pair α-chymotrypsin/ribonuclease A on a strong cation exchange resin. Two selective displacers, 1-(4-chlorobenzyl)piperidin-3-aminesulfate and N′1′-(4-methyl-quinolin-2-yl)-ethane-1,2-diamine dinitrate, and one non-selective displacer, spermidine, were selected as model systems to investigate the mechanism of chemically selective displacement chromatography. Saturation transfer difference (STD) NMR was used to directly evaluate displacer–protein binding. The results indicated that while binding occurred between the two chemically selective displacers and the more hydrophobic protein, α-chymotrypsin, no binding was observed with ribonuclease A. Further, the non-selective displacer, spermidine, was not observed to bind to either protein. Importantly, the binding event was observed to occur primarily on the aromatic portion of the selective displacers. Extensive molecular dynamic simulations of protein–displacer–water solution were also carried out. The MD results corroborated the NMR findings demonstrating that the binding of selective displacers occurred primarily on hydrophobic surface patches of α-chymotrypsin, while no significant long term binding to ribonuclease A was observed. The non-selective displacer did not show significant binding to either of the proteins. MD simulations also indicated that the charged amine group of the selective displacers in the bound state was primarily oriented towards the solvent, potentially facilitating their interaction with a resin surface. These results directly confirm that selective binding between a protein and displacer is the mechanism by which chemically selective displacement occurs. This opens up many possibilities for future molecular design of selective displacers for a range of applications. Biotechnol. Bioeng. 2009;102: 1428–1437. © 2008 Wiley Periodicals, Inc.

In order for methane to be economically produced from the seafloor, prediction and detection of massive hydrate deposits will be necessary. In many cases, hydrate samples recovered from seafloor sediments appear as veins or nodules, suggesting that there are strong geologic controls on where hydrate is likely to accumulate. Experiments have been conducted examining massive hydrate accumulation from methane gas bubbles within natural and synthetic sediments in a large volume pressure vessel through temperature and pressure data, as well as visual observations. Observations of hydrate growth suggest that accumulation of gas bubbles within void spaces and at sediment interfaces likely results in the formation of massive hydrate deposits. Methane hydrate was first observed as a thin film forming at the gas/water interface of methane bubbles trapped within sediment void spaces. As bubbles accumulated, massive hydrate growth occurred. These experiments suggest that in systems containing free methane gas, bubble pathways and accumulation points likely control the location and habit of massive hydrate deposits.

One of the major impediments to the implementation of displacement chromatography for the purification of biomolecules is the need to collect fractions from the column effluent for time-consuming offline analysis. The ability to employ direct online monitoring of displacement chromatography would have significant implications for applications ranging from analytical to preparative bioseparations. To this end, a set of novel fluorescent displacers were rationally designed using known chemically selective displacers as a template. Fluorescent cores were functionalized with different charge moieties, creating a homologous library of displacers. These compounds were then tested on two protein pairs, alpha-chymotrypsinogen A/ribonuclease A and cytochrome c/lysozyme, using batch and column displacement experiments. Of the synthesized displacers, two were found to be highly selective while one was determined to be a high-affinity displacer. Column displacements using one of the selective displacers yielded complete separation of both protein pairs while facilitating direct online detection using UV and fluorescence detection. Saturation transfer difference NMR was also carried out to investigate the binding of the fluorescent displacers to proteins. The results indicated a selective binding between the selective displacers and alpha-chymotrypsinogen A, while no binding was observed for ribonuclease A, confirming that protein-displacer binding is responsible for the selectivity in these systems. This work demonstrates the utility of fluorescent displacers to enable online monitoring of displacer breakthroughs while also acting as efficient displacers for protein purification.

According to NMR chemical shift data, the ensemble of ubiquitin is a mixture of “open” and “closed” conformations at rapid equilibrium. Pressure perturbations provide the means to study the transition between the two conformers by imposing an additional constraint on the system's partial molar volume. Here we use nanosecond-timescale molecular dynamics simulations to characterize the network of correlated motions accessible to the conformers at low- and high-pressure conditions. Using the isotropic reorientational eigenmode dynamics formalism to analyze our simulation trajectories, we reproduce NMR relaxation data without fitting any parameters of our model. Comparative analysis of our results suggests that the two conformations behave very differently. The dynamics of the “closed” conformation are almost unaffected by pressure and are dominated by large-amplitude correlated motions of residues 23–34 in the extended α-helix. The “open” conformation under conditions of normal pressure displays increased mobility, focused on the loop residues 17–20, 46–55, and 58–59 at the bottom of the core of the structure, as well as the C-terminal residues 69–76, that directly participate in key protein-protein interactions. For the same conformation, a pressure increase induces a loss of separability between molecular tumbling and internal dynamics, while motions between different backbone sites become uncorrelated.

10 páginas, 5 figuras, 4 tablas -- 12998-13007, We report the first chemoenzymatic synthesis of the stable isotope-enriched heparin from a uniformly labeled [13C,15N]N-acetylheparosan (-GlcA(1,4)GlcNAc-) prepared from E. coli K5. Glycosaminoglycan (GAG) precursors and heparin were formed from N-acetylheparosan by the following steps: chemical N-deacetylation and N-sulfonation leading to N-sulfoheparosan (-GlcA(1,4)GlcNS-); enzyme-catalyzed C5-epimerization and 2-O-sulfonation leading to undersulfated heparin (-IdoA2S(1,4)GlcNS-); enzymatic 6-O-sulfonation leading to the heparin backbone (-IdoA2S(1,4)GlcNS6S-); and selective enzymatic 3-O-sulfonation leading to the anticoagulant heparin, containing the GlcNS6S3S residue. Heteronuclear, multidimensional nuclear magnetic resonance spectroscopy was employed to analyze the chemical composition and solution structure of [13C,15N]N-acetylheparosan, precursors, and heparin. Isotopic enrichment was found to provide well-resolved 13C spectra with the high sensitivity required for conformational studies of these biomolecules. Stable isotope-labeled heparin was indistinguishable from heparin derived from animal tissues and is a novel reagent for studying the interaction of heparin with proteins, National Institutes of Health Grants GM38060 and HL62244 (to R.J.L.) and AI50050 (to J.L.), and the Ministry of Education and Science of Spain for Grant CTQ-2006-10874-C02-01 (to J.J.-B.) and for Ramón-y-Cajal contract (to F.C.) are gratefully acknowledged for supporting this work

We describe an affinity-based strategy for designing selective protein displacers for the chromatographic purification of proteins. To design a displacer that is selective for a target protein, we attached a component with affinity for the target protein to a resin-binding component; we then tested the ability of such displacers to selectively retain the target protein on a resin relative to another protein having a similar retention time. In particular, we synthesized displacers based on biotin, which selectively retained avidin as compared to aprotinin on SP Sepharose high performance resin. In addition, we have extended this approach to develop an affinity-peptide-based displacer that discriminates between lysozyme and cytochrome c. Here, a selective displacer was designed from a lysozyme-binding peptide that had been identified and optimized previously using phage-display technology. Our results suggest a general strategy for designing highly selective affinity-based displacers by identifying molecules (e.g., peptides) that bind to a protein of interest and using an appropriate linker to attach these molecules to a moiety that binds to the stationary phase.

A three-phase, pilot-scale continuous-jet hydrate reactor (CJHR) has been developed for the production of gas hydrates. The reactor receives water and a hydrate-forming species to produce the solid gas hydrate. The CJHR has been tested for the production of CO{sub 2} hydrate for the purpose of ocean carbon sequestration. Formation of CO{sub 2} hydrate was investigated using various reactor/injector designs in a 72-l high-pressure vessel. Designs of the CJHR varied from single-capillary to multiple-capillary injectors that dispersed (1) liquid CO{sub 2} into water or (2) water into liquid CO{sub 2}. The novel injector is designed to improve the dispersion of one reactant into the other and, thus, eliminate mass transfer barriers that negatively affect conversion. An additional goal was an increase in production rates of two orders of magnitude. The designed injectors were tested in both distilled and saline water. Hydrate production experiments were conducted at different CO{sub 2} and water flow rates and for pressures and temperatures equivalent to intermediate ocean depths (1100-1700 m). The pilot-scale reactor with the novel injection system successfully increased hydrate production rates and efficiency.

A pilot-scale, three-phase continuous-jet hydrate reactor, developed to produce CO 2 hydrate for ocean sequestration, was tested both in the laboratory and at sea. A 72-L pressure vessel was used for laboratory tests; field experiments were performed with a remotely operated vehicle at depths between 1200 and 2000 m off the coast of Monterey, CA. Rapid production of a consolidated sinking CO 2 -hydrate composite paste was achieved in both settings. The vertical and lateral movement of the extruded hydrate was monitored by the high-definition television camera mounted on the vehicle and with a 675-kHz scanning sonar, along with dissolution rates and associated temperature and pH changes during the injection operations. It was observed that globules of unconverted liquid CO 2 occluded in the structure of the hydrate composite largely determine the hydrate composite behavior in the ocean by providing sites for accelerated dissolution, thereby affecting the CO 2 -hydrate particle orientation, shape, lifetime, and sinking rate. Model calculations predict that large-scale releases of these particles (at a CO 2 injection rate of ∼100 kg/s) should show a descent depth of nearly 1000 m below their release point, as a result of plume dynamics and the increase in density caused by the CO 2 dissolution into the surrounding ocean water.

To probe the role of side chain dynamics in A{beta} aggregation, we studied the methyl dynamics of native A{beta}40 and A{beta}42 by measuring cross relaxation rates with interleaved data collection. The methyl groups in the C-terminus are in general more rigid in A{beta}42 than in A{beta}40, consistent with previous results from backbone {sup 15}N dynamics. This lends support to the hypothesis that a rigid C-terminus in A{beta}42 may serve as an internal aggregation seed. Interestingly, two methyl groups of V18 located in the central hydrophobic cluster are more mobile in A{beta}42 than in A{beta}40, most likely due to the paucity of V18 intra-molecular interactions in A{beta}42. V18 may then be more available for inter-molecular interactions to form A{beta}42 aggregates. Thus, the side chain mobility of the central hydrophobic cluster may play an important role in A{beta} aggregation and may contribute to the difference in aggregation propensity between A{beta}40 and A{beta}42.