Search

We report the first mass measurement of the proton-halo candidate $^{22}$Al performed with the LEBIT facility's 9.4~T Penning trap mass spectrometer at FRIB. This measurement completes the mass information for the lightest remaining proton-dripline nucleus achievable with Penning traps. $^{22}$Al has been the subject of recent interest regarding a possible halo structure from the observation of an exceptionally large isospin asymmetry [Phys. Rev. Lett. \textbf{125} 192503 (2020)]. The measured mass excess value of $\text{ME}=18\;093.6(7)$~keV, corresponding to an exceptionally small proton separation energy of $S_p = 99.2(1.0)$~keV, is compatible with the suggested halo structure. Our result agrees well with predictions from \textit{sd}-shell USD Hamiltonians. While USD Hamiltonians predict deformation in $^{22}$Al ground-state with minimal $1s_{1/2}$ occupation in the proton shell, a particle-plus-rotor model in the continuum suggests that a proton halo could form at large quadrupole deformation. These results emphasize the need for a charge radius measurement to conclusively determine the halo nature., Comment: 9 pages, 4 figures

We report the first direct measurement of the nuclear electron capture (EC) decay $Q$-value of $^{7}$Be $\rightarrow$ $^{7}$Li via high-precision Penning trap mass spectrometry (PTMS). This was performed using the LEBIT Penning trap located at the National Superconducting Cyclotron Laboratory/Facility for Rare Isotope Beams (NSCL/FRIB) using the newly commissioned Batch-Mode Ion-Source (BMIS) to deliver the unstable $^{7}$Be$^{+}$ samples. With a measured value of $Q_{EC}$ = 861.963(23) keV this result is also three times more precise than any previous determination of this quantity. This improved precision, and accuracy of the $^7$Be EC decay $Q$-value is critical for ongoing experiments that measure the recoiling nucleus in this system as a signature to search for beyond Standard Model (BSM) neutrino physics using $^7$Be-doped superconducting sensors.

Light curves are the primary observable of type-I x-ray bursts. Computational x-ray burst models must match simulations to observed light curves. Most of the error in simulated curves comes from uncertainties in $rp$ process reaction rates, which can be reduced via precision mass measurements of neutron-deficient isotopes in the $rp$ process path. We perform a precise Penning trap mass measurement of $^{27}$P utilizing the ToF-ICR technique. We use this measurement to calculate $rp$ process reaction rates and input these rates into an x-ray burst model to reduce simulated light curve uncertainty. We also use the mass measurement of $^{27}$P to validate the Isobaric Multiplet Mass Equation (IMME) for the A=27 T=$\frac{3}{2}$ isospin quartet which $^{27}$P belongs to. The mass excess of $^{27}$P was measured to be -670.7(6) keV, a fourteen-fold precision increase over the mass reported in the 2020 Atomic Mass Evaluation (AME2020). X-ray burst light curves were produced with the MESA (Modules for Experiments in Stellar Astrophysics) code using the new mass and associated reaction rates. Changes in the mass of $^{27}$P seem to have minimal effect on light curves, even in burster systems tailored to maximize impact. The mass of $^{27}$P does not play a significant role in x-ray burst light curves. It is important to understand that more advanced models do not just provide more precise results, but often qualitatively different ones. This result brings us a step closer to extracting stellar parameters from individual x-ray burst observations. The IMME has been validated for the $A=27, T=3/2$ quartet. The normal quadratic form of the IMME using the latest data yields a reduced $\chi^2$ of 2.9. The cubic term required to generate an exact fit to the latest data matches theoretical attempts to predict this term., Comment: 8 pages, 6 figures

The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligning layers processed by light, is very important. Here, aligning properties of hybrid aligning layers created on the basis of sapphire surfaces additionally coated by photoaligning layer of PVCN-F are studied. These hybrid layers possess the properties of the nano-structured sapphire layer and the photosensitive PVCN-F layer, and complement each other. The irradiation time dependence of the azimuthal anchoring energy of the hybrid layers is studied. By using certain experimental conditions during irradiation of hybrid layers, e.g., polarisation of light and irradiation time, a minimum value of the azimuthal anchoring energy, close to zero, was obtained. Atomic force microscope studies of the irradiated hybrid layers were also carried out. It was found that the behavior of the contact angle of nematic droplets placed on treated sapphire surfaces are in good agreement with properties of hybrid aligning layers and parameters of structuring surface obtained from AFM images., Comment: 31 pages, 16 figures, 2 tables

Background: Low energy $\beta$ and electron capture (EC) decays are important systems in neutrino mass determination experiments. An isotope with an ultra-low Q value $\beta$-decay to an excited state in the daughter with Qes < 1 keV could provide a promising alternative candidate for future experiments. $^{75}$Se EC and $^{75}$Ge $\beta$-decay represent such candidates, but a more precise determination of the mass of the common daughter, $^{75}$As, is required to evaluate whether their potential decay branches are energetically allowed and ultra-low. Purpose: Perform a precise atomic mass measurement of $^{75}$As and combine the result with the precisely known atomic masses of $^{75}$Se and $^{75}$Ge, along with nuclear energy level data for $^{75}$As to evaluate potential ultra-low Q value decay branches in the EC decay of $^{75}$Se and the $\beta$-decay of $^{75}$Ge. Method: The LEBIT Penning trap mass spectrometer at the Facility for Rare Isotope Beams was used to perform a high-precision measurement of the atomic mass of $^{75}$As via cyclotron frequency ratio measurements of $^{75}$As$^{+}$ to a $^{12}$C$_{6}^{+}$ reference ion. Results: The $^{75}$As mass excess was determined to be ME($^{75}$As)= -73 035.98(43) keV, from which the ground-state to ground-state Q values for $^{75}$Se EC and $^{75}$Ge $\beta$-decay were determined to be 866.50(44) keV and 1179.01(44) keV, respectively. These results were compared to energies of excited states in $^{75}$As at 865.4(5) keV and 1172.0(6) keV to determine Q values of 1.1(7) keV and 7.0(7) keV for the potential ultra-low EC and $\beta$-decay branches of $^{75}$Se and $^{75}$Ge, respectively. Conclusion: The $^{75}$Se EC decay to the 865.4 keV excited state in $^{75}$As is potentially ultra-low with Qes $\approx$ 1 keV. However, a more precise determination of the 865.4(5) keV level in $^{75}$As is required., Comment: 7 pages,3 figures

We performed a Penning trap mass measurement of $^{61}{\rm Zn}$ at the National Superconducting Cyclotron Laboratory and NuShellX calculations of the $^{61}{\rm Zn}$ and $^{62}{\rm Ga}$ structure using the GXPF1A Hamiltonian to obtain improved estimates of the $^{61}{\rm Zn}(p,\gamma)^{62}{\rm Ga}$ and $^{60}{\rm Cu}(p,\gamma)^{61}{\rm Zn}$ reaction rates. Surveying astrophysical conditions for type-I X-ray bursts with the code MESA, implementing our improved reaction rates, and taking into account updated nuclear masses for $^{61}{\rm V}$ and $^{61}{\rm Cr}$ from the recent literature, we refine the neutrino luminosity from the important mass number $A=61$ urca cooling source in accreted neutron star crusts. This improves our understanding of the thermal barrier between deep heating in the crust and the shallow depths where extra heat is needed to explain X-ray superbursts, as well as the expected signature of crust urca neutrino emission in light curves of cooling transients., Comment: Submitted

Linear gas stoppers are widely used to convert high-energy, rare-isotope beams and reaction products into low-energy beams with small transverse emittance and energy spread. Stopping of the high-energy ions is achieved through interaction with a buffer gas, typically helium, generating large quantities of He$^+$/e$^-$ pairs. The Advanced Cryogenic Gas Stopper (ACGS) was designed for fast, efficient stopping and extraction of high-intensity, rare-isotope beams. As part of the design process, a comprehensive particle-in-cell code was developed to optimize the transport and extraction of rare isotopes from the ACGS in the presence of space charge, including He$^+$/e$^-$ dynamics, buffer gas interactions including gas flow, RF carpets, and ion extraction through a nozzle or orifice. Details of the simulations are presented together with comparison to experiment when available.

Isobaric quintets provide the best test of the isobaric multiplet mass equation (IMME) and can uniquely identify higher order corrections suggestive of isospin symmetry breaking effects in the nuclear Hamiltonian. The Generalized IMME (GIMME) is a novel microscopic interaction theory that predicts an extension to the quadratic form of the IMME. Only the $A=20, 32$ $T=2$ quintets have the exotic $T_z = -2$ member ground state mass determined to high-precision by Penning trap mass spectrometry. In this work, we establish $A=36$ as the third high-precision $T=2$ isobaric quintet with the $T_z = -2$ member ground state mass measured by Penning trap mass spectrometry and provide the first test of the predictive power of the GIMME. A radioactive beam of neutron-deficient $^{36}$Ca was produced by projectile fragmentation at the National Superconducting Cyclotron Laboratory. The beam was thermalized and the mass of $^{36}$Ca$^+$ and $^{36}$Ca$^{2+}$ measured by the Time of Flight - Ion Cyclotron Resonance method in the LEBIT 9.4 T Penning trap. We measure the mass excess of $^{36}$Ca to be ME$ = -6483.6(56)$ keV, an improvement in precision by a factor of 6 over the literature value. The new datum is considered together with evaluated nuclear data on the $A=36$, $T=2$ quintet. We find agreement with the quadratic form of the IMME given by isospin symmetry, but only coarse qualitative agreement with predictions of the GIMME. A total of three isobaric quintets have their most exotic members measured by Penning trap mass spectrometry. The GIMME predictions in the $T = 2$ quintet appear to break down for $A = 32$ and greater.

The Isobaric Multiplet Mass Equation (IMME) has been successful at predicting the masses of isobaric analogue states in the same multiplet, while its coefficients are known to follow trends as functions of mass number. The Atomic Mass Evaluation 2016 [Chin. Phys. C 41, 030003 (2017)] $^{44}$V mass value results in an negative $c$ coefficient for the IMME quadratic term. The $b$ and $c$ coefficients can provide constraints for construction of the isospin-nonconserving (INC) Hamiltonians for the $pf$ shell. The excitation energy of the $0^+, T=2$ level in $^{44}$V is currently unknown and can be used to constrain the $^{44}$Cr mass. The aim of the experiment was to perform high-precision mass measurements to resolve the difference between $^{44}$V isomeric and ground states, to test the IMME, and to provide ingredients for identifying the $0^+$, $T=2$ state in $^{44}$V. High-precision Penning trap mass spectrometry was performed at LEBIT, to measure the cyclotron frequency ratios of [$^{44g,m}$VO]$^+$ versus [$^{32}$SCO]$^+$, a reference mass, to extract both the isomeric and ground state masses of $^{44}$V. The mass excess of the ground and isomeric states in $^{44}$V were measured to be $-23\ 804.9(80)$ keV/$\text{c}^2$ and $-23\ 537.0(55)$ keV/$\text{c}^2$. This yielded a new proton separation energy of $S_p$ = 1\ 773(10) keV. The new mass values of $^{44}$V have been used to deduce the IMME $b$ and $c$ coefficients of the lowest $2^+$ and $6^+$ triplets in $A=44$. The $2^+$ $c$ coefficient is verified with the IMME trend and agrees with the shell-model predictions using charge-dependent Hamiltonians. The mirror energy differences were determined between $^{44}$V and $^{44}$Sc, in line with isospin-symmetry. The new value of the proton separation energy determined will be important for the determination of the $0^+$, $T=2$ state in $^{44}$V and for prediction of the mass of $^{44}$Cr., Comment: 9 pages, 5 figures

Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures.

Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether this can further enhance their thermoelectric performance.}{As bulk nanostructuring routes we studied melt spinning and ball milling. To optimize the compaction process and/or stabilize the nanostructure we varied the process parameters, used additives, and studied clathrate-based composites. Initial results on clathate nanowires as simpler model nanostructures are also presented., Comment: 19 pages, 28 images