Search

In the iron-pnictide material CeFeAsO not only the Fe moments, but also the local 4f moments of the Ce order antiferromagnetically at low temperatures. We elucidate on the peculiar role of the Ce on the emergence of superconductivity. While application of pressure suppresses the iron SDW ordering temperature monotonously up to 4 GPa, the Ce-4f magnetism is stabilized, until both types of magnetic orders disappear abruptly and a narrow SC dome develops. With further increasing pressure characteristics of a Kondo-lattice system become more and more apparent in the electrical resistivity. This suggests a connection of the emergence of superconductivity with the extinction of the magnetic order and the onset of Kondo-screening of the Ce-4f moments., Comment: 6 pages, 3 figures + supplemental material

We have synthesized Fe$_{1+y}$Te thin films by means of molecular beam epitaxy (MBE) under Te-limited growth conditions. We found that epitaxial layer-by-layer growth is possible for a wide range of excess Fe values, wider than expected from what is known on the bulk material. Using x-ray magnetic circular dichroism spectroscopy at the Fe L$_{2,3}$ and Te M$_{4,5}$ edges, we observed that films with high excess Fe contain ferromagnetic clusters while films with lower excess Fe remain nonmagnetic. Moreover, x-ray absorption spectroscopy showed that it is possible to obtain films with very similar electronic structure as that of a high quality bulk single crystal Fe$_{1.14}$Te. Our results suggest that MBE with Te-limited growth may provide an opportunity to synthesize FeTe films with smaller amounts of excess Fe as to come closer to a possible superconducting phase., Comment: 6 pages, 6 figures accepted for publication in Physical Review Materials

Different from other magnetically frustrated spinel systems, GeCu$_{2}$O$_{4}$ is a strongly tetragonal distorted spinel cuprate in which edge-sharing CuO$_{2}$ ribbons are running along alternating directions perpendicular to the $c$-axis. Here, GeCu$_{2}$O$_{4}$ samples of high quality were prepared via high pressure synthesis (at 4 GPa) and the corresponding magnetic and dielectric properties were investigated. For the first time, we observed a ferroelectric polarization emerging at T$_{N}$ $\sim$ 33~K. Although the ferroelectric polarization is weak in GeCu$_{2}$O$_{4}$ ($P$ $\sim$ 0.2$\mu$C/m$^{2}$), the existence of spin-induced multiferroicity provides a strong constraint on the possible ground state magnetic structures and/or the corresponding theoretical models of multiferroicity for GeCu$_{2}$O$_{4}$., Comment: https://journals.aps.org/prmaterials/abstract/10.1103/PhysRevMaterials.2.041402

A rapid and anisotropic modification of the Fermi-surface shape can be associated with abrupt changes in crystalline lattice geometry or in the magnetic state of a material. In this study we show that such an electronic topological transition is at the basis of the formation of an unusual pressure-induced tetragonal ferromagnetic phase in Fe$_{1.08}$Te. Around 2 GPa, the orthorhombic and incommensurate antiferromagnetic ground-state of Fe$_{1.08}$Te is transformed upon increasing pressure into a tetragonal ferromagnetic state via a conventional first-order transition. On the other hand, an isostructural transition takes place from the paramagnetic high-temperature state into the ferromagnetic phase as a rare case of a `type 0' transformation with anisotropic properties. Electronic-structure calculations in combination with electrical resistivity, magnetization, and x-ray diffraction experiments show that the electronic system of Fe$_{1.08}$Te is instable with respect to profound topological transitions that can drive fundamental changes of the lattice anisotropy and the associated magnetic order., Comment: 7 pages, 4 figure

We report the effect of hydrostatic pressure on the magnetic and structural properties of the shape-memory Heusler alloy Ni50Mn35In15. Magnetization and x-ray diffraction experiments were performed at hydrostatic pressures up to 5 GPa using diamond anvil cells. Pressure stabilizes the martensitic phase, shifting the martensitic transition to higher temperatures and suppresses the ferromagnetic austenitic phase. Above ~3 GPa, where the martensitic-transition temperature approaches the Curie temperature in the austenite, the magnetization shows no indication of ferromagnetic ordering anymore. We further find an extremely large temperatureregion with a mixture of martensite and austenite phases, which directly relates to the magnetic properties., Comment: 5 pages, 3 figures

A combination of phenomenological analysis and M\"ossbauer spectroscopy experiments on the tetragonal Fe$_{1+y}$Te system indicates that the magnetic ordering transition in compounds with higher Fe-excess, $y\ge$ 0.11, is unconventional. Experimentally, a liquid-like magnetic precursor with quasi-static spin-order is found from significantly broadened M\"ossbauer spectra at temperatures above the antiferromagnetic transition. The incommensurate spin-density wave (SDW) order in Fe$_{1+y}$Te is described by a magnetic free energy that violates the weak Lifshitz condition in the Landau theory of second-order transitions. The presence of multiple Lifshitz invariants provides the mechanism to create multidimensional, twisted, and modulated solitonic phases., Comment: 5 pages, 2 figures

We report superfluorescent (SF) emission in electrically pumped InGaN/InGaN QW lasers with saturable absorber. In particular, we observe a superlinear growth of the peak power of SF pulses with increasing amplitude of injected current pulses and attribute it to cooperative pairing of electron-hole (e-h) radiative recombinations. The phase transitions from amplified spontaneous emission to superfluorescence and then to lasing regime is confirmed by observing (i) abrupt peak power growth accompanied by spectral broadening, (ii) spectral shape with hyperbolic secant envelope and (iii) red shift of central wavelength of SF emission pulse. The observed red shift of SF emission is shown to be caused by the pairing of e-h pairs in an indirect cooperative X-transition., Comment: 18 pages, 7 figures

We report the effects of hydrostatic pressure on the temperature-induced phase transitions in Fe1.08Te in the pressure range 0-3 GPa using synchrotron powder x-ray diffraction (XRD). The results reveal a plethora of phase transitions. At ambient pressure, Fe1.08Te undergoes simultaneous first-order structural symmetry-breaking and magnetic phase transitions, namely from the paramagnetic tetragonal (P4/nmm) to the antiferromagnetic monoclinic (P2_1/m) phase. We show that, at a pressure of 1.33 GPa, the low temperature structure adopts an orthorhombic symmetry. More importantly, for pressures of 2.29 GPa and higher, a symmetry-conserving tetragonal-tetragonal phase transition has been identified from a change in the c/a ratio of the lattice parameters. The succession of different pressure and temperature-induced structural and magnetic phases indicates the presence of strong magneto-elastic coupling effects in this material., Comment: 11 pages

Specific heat, resistivity, magnetic susceptibility, linear thermal expansion (LTE), and high-resolution synchrotron X-ray powder diffraction investigations of single crystals Fe1+yTe (0.06 < y < 0.15) reveal a splitting of a single, first-order transition for y < 0.11 into two transitions for y > 0.12. Most strikingly, all measurements on identical samples Fe1.13Te consistently indicate that, upon cooling, the magnetic transition at T_N precedes the first-order structural transition at a lower temperature T_s. The structural transition in turn coincides with a change in the character of the magnetic structure. The LTE measurements along the crystallographic c-axis displays a small distortion close to T_N due to a lattice striction as a consequence of magnetic ordering, and a much larger change at T_s. The lattice symmetry changes, however, only below T_s as indicated by powder X-ray diffraction. This behavior is in stark contrast to the sequence in which the phase transitions occur in Fe pnictides., Comment: 6 pages

In a joint theoretical and experimental study we investigate the pressure dependence of the Eu valence in EuPd_3B_x (0 <= x <= 1). Density functional band structure calculations are combined with x-ray absorption and x-ray diffraction measurements under hydrostatic pressures up to 30 GPa. It is observed that the heterogenous mixed-valence state of Eu in EuPd_3B_x (x >= 0.2) can be suppressed partially in this pressure range. From the complementary measurements we conclude that the valence change in EuPd_3B_x is mainly driven by the number of additional valence electrons due to the insertion of boron, whereas the volume change is a secondary effect. A similar valence change of Eu in Eu_{1-x}La_xPd_3 is predicted for x >= 0.4, in line with the suggested electron count scenario.

Cells sense the geometry and stiffness of their adhesive environment by active contractility. For strong adhesion to flat substrates, two-dimensional contractile network models can be used to understand how force is distributed throughout the cell. Here we compare the shape and force distribution for different variants of such network models. In contrast to Hookean networks, cable networks reflect the asymmetric response of biopolymers to tension versus compression. For passive networks, contractility is modeled by a reduced resting length of the mechanical links. In actively contracting networks, a constant force couple is introduced into each link in order to model contraction by molecular motors. If combined with fixed adhesion sites, all network models lead to invaginated cell shapes, but only actively contracting cable networks lead to the circular arc morphology typical for strongly adhering cells. In this case, shape and force distribution are determined by local rather than global determinants and thus are suited to endow the cell with a robust sense of its environment. We also discuss non-linear and adaptive linker mechanics as well as the relation to tissue shape., Comment: 35 pages, 14 postscript figures, to appear in Physical Review E

Surface electric noise, i.e., the non-uniform distribution of charges and potentials on a surface, poses a great experimental challenge in modern precision force measurements. Such a challenge is encountered in a number of different experimental circumstances. The scientists employing atomic force microscopy (AFM) have long focused their efforts to understand the surface-related noise issues via variants of AFM techniques, such as Kelvin probe force microscopy or electric force microscopy. Recently, the physicists investigating quantum vacuum fluctuation phenomena between two closely-spaced objects have also begun to collect experimental evidence indicating a presence of surface effects neglected in their previous analyses. It now appears that the two seemingly disparate science communities are encountering effects rooted in the same surface phenomena. In this report, we suggest specific experimental tasks to be performed in the near future that are crucial not only for fostering needed collaborations between the two communities, but also for providing valuable data on the surface effects in order to draw the most realistic conclusion about the actual contribution of the Casimir force (or van der Waals force) between a pair of real materials., Comment: The paper appeared in the Proceedings to the 12th International Conference on Noncontact Atomic Force Microscopy (NC-AFM 2009) and Casimir 2009 Satellite Workshop

Mechanical cues like the rigidity of the substrate are main determinants for the decision making of adherent cells. Here we use a mechano-chemical model to predict the cellular response to varying substrate stiffness. The model equations combine the mechanics of contractile actin filament bundles with a model for the Rho-signaling pathway triggered by forces at cell-matrix contacts. A bifurcation analysis of cellular contractility as a function of substrate stiffness reveals a bistable response, thus defining a lower threshold of stiffness, below which cells are not able to build up contractile forces, and an upper threshold of stiffness, above which cells are always in a strongly contracted state. Using the full dynamical model, we predict that rate-dependent hysteresis will occur in the cellular traction forces when cells are exposed to substrates of time-dependent stiffness., Comment: Revtex, 4 PDF figures

The interface and electronic structure of thin (~20-74 nm) Co3O4(110) epitaxial films grown by oxygen-assisted molecular beam epitaxy on MgAl2O4(110) single crystal substrates have been investigated by means of real and reciprocal space techniques. As-grown film surfaces are found to be relatively disordered and exhibit an oblique low energy electron diffraction (LEED) pattern associated with the O-rich CoO2 bulk termination of the (110) surface. Interface and bulk film structure are found to improve significantly with post-growth annealing at 820 K in air and display sharp rectangular LEED patterns, suggesting a surface stoichiometry of the alternative Co2O2 bulk termination of the (110) surface. Non-contact atomic force microscopy demonstrates the presence of wide terraces separated by atomic steps in the annealed films that are not present in the as-grown structures; the step height of ~ 2.7 A corresponds to two atomic layers and confirms a single termination for the annealed films, consistent with the LEED results. A model of the (1 * 1) surfaces that allows for compensation of the polar surfaces is presented., Comment: 8 pages, 7 figures

We present a systematic pressure study of poly- and single crystalline SrFe2As2 by electrical resistivity and X-ray diffraction measurements. SrFe2As2 exhibits a structural phase transition from a tetragonal to an orthorhombic phase at T0=205 K. The structural phase transition is intimately linked to a spin-density-wave transition taking place at the same temperature. Our pressure experiments show that T0 shifts to lower temperatures with increasing pressure. We can estimate a critical pressure of 4 to 5 GPa for the suppression of T0 to zero temperature. At pressures above 2.5 GPa the resistivity decreases significantly below Tx=40 K hinting at the emergence of superconductivity but no zero-resistance state is observed up to 3 GPa., Comment: 5 pages, 4 figures, accepted for publication in Phys. Rev. B

For a cell moving in hydrodynamic flow above a wall, translational and rotational degrees of freedom are coupled by the Stokes equation. In addition, there is a close coupling of convection and diffusion due to the position-dependent mobility. These couplings render calculation of the mean encounter time between cell surface receptors and ligands on the substrate very difficult. Here we show for a two-dimensional model system how analytical progress can be achieved by treating motion in the vertical direction by an effective reaction term in the mean first passage time equation for the rotational degree of freedom. The strength of this reaction term can either be estimated from equilibrium considerations or used as a fit parameter. Our analytical results are confirmed by computer simulations and allow to assess the relative roles of convection and diffusion for different scaling regimes of interest., Comment: Reftex, postscript figures included

We probe the dynamic strength of multiple biotin-streptavidin adhesion bonds under linear loading using the biomembrane force probe setup for dynamic force spectroscopy. Measured rupture force histograms are compared to results from a master equation model for the stochastic dynamics of bond rupture under load. This allows us to extract the distribution of the number of initially closed bonds. We also extract the molecular parameters of the adhesion bonds, in good agreement with earlier results from single bond experiments. Our analysis shows that the peaks in the measured histograms are not simple multiples of the single bond values, but follow from a superposition procedure which generates different peak positions., Comment: to appear in Europhysics Letters

Motivated by rolling adhesion of white blood cells in the vasculature, we study how cells move in linear shear flow above a wall to which they can adhere via specific receptor-ligand bonds. Our computer simulations are based on a Langevin equation accounting for hydrodynamic interactions, thermal fluctuations and adhesive interactions. In contrast to earlier approaches, our model not only includes stochastic rules for the formation and rupture of bonds, but also fully resolves both receptor and ligand positions. We identify five different dynamic states of motion in regard to the translational and angular velocities of the cell. The transitions between the different states are mapped out in a dynamic state diagram as a function of the rates for bond formation and rupture. For example, as the cell starts to adhere under the action of bonds, its translational and angular velocities become synchronized and the dynamic state changes from slipping to rolling. We also investigate the effect of non-molecular parameters. In particular, we find that an increase in viscosity of the medium leads to a characteristic expansion of the region of stable rolling to the expense of the region of firm adhesion, but not to the expense of the regions of free or transient motion. Our results can be used in an inverse approach to determine single bond parameters from flow chamber data on rolling adhesion., Comment: Reftex, postscript figures included, typos corrected, accepted for publication in PRE

We report the first determination of a distance bracket for the high-velocity cloud (HVC) complex C. Combined with previous measurements showing that this cloud has a metallicity of 0.15 times solar, these results provide ample evidence that complex C traces the continuing accretion of intergalactic gas falling onto the Milky Way. Accounting for both neutral and ionized hydrogen as well as He, the distance bracket implies a mass of 3-14x10^6 M_sun, and the complex represents a mass inflow of 0.1-0.25 M_sun/yr. We base our distance bracket on the detection of CaII absorption in the spectrum of the blue horizontal branch star SDSS J120404.78+623345.6, in combination with a significant non-detection toward the BHB star BS 16034-0114. These results set a strong distance bracket of 3.7-11.2 kpc on the distance to complex C. A more weakly supported lower limit of 6.7 kpc may be derived from the spectrum of the BHB star BS 16079-0017., Comment: Accepted for publication in ApJ Letters

Biochemistry and mechanics are closely coupled in cell adhesion. At sites of cell-matrix adhesion, mechanical force triggers signaling through the Rho-pathway, which leads to structural reinforcement and increased contractility in the actin cytoskeleton. The resulting force acts back to the sites of adhesion, resulting in a positive feedback loop for mature adhesion. Here we model this biochemical-mechanical feedback loop for the special case when the actin cytoskeleton is organized in stress fibers, which are contractile bundles of actin filaments. Activation of myosin II molecular motors through the Rho-pathway is described by a system of reaction-diffusion equations, which are coupled into a viscoelastic model for a contractile actin bundle. We find strong spatial gradients in the activation of contractility and in the corresponding deformation pattern of the stress fiber, in good agreement with experimental findings., Comment: Revtex, 35 pages, 13 Postscript figures included, in press with New Journal of Physics, Special Issue on The Physics of the Cytoskeleton

The structural parameters of $\epsilon$-FeGe have been determined at ambient conditions using single crystal refinement. Powder diffraction have been carried out to determine structural properties and compressibility for pressures up to 30 GPa and temperatures as low as 82 K. The discontinuous change in the pressure dependence of the shortest Fe-Ge interatomic distance might be interpreted as a symmetry-conserving transition and seems to be related to a magnetic phase boundary line., Comment: 4 pages, 5 figures

Cells in multicellular organisms adhere to the extracellular matrix through two-dimensional clusters spanning a size range from very few to thousands of adhesion bonds. For many common receptor-ligand systems, the ligands are tethered to a surface via polymeric spacers with finite binding range, thus adhesion cluster stability crucially depends on receptor-ligand distance. We introduce a one-step master equation which incorporates the effect of cooperative binding through a finite number of polymeric ligand tethers. We also derive Fokker-Planck and mean field equations as continuum limits of the master equation. Polymers are modeled either as harmonic springs or as worm-like chains. In both cases, we find bistability between bound and unbound states for intermediate values of receptor-ligand distance and calculate the corresponding switching times. For small cluster sizes, stochastic effects destabilize the clusters at large separation, as shown by a detailed analysis of the stochastic potential resulting from the Fokker-Planck equation., Comment: final version after minor revisions

Motivated by cell adhesion in hydrodynamic flow, here we study bond formation between a spherical Brownian particle in linear shear flow carrying receptors for ligands covering the boundary wall. We derive the appropriate Langevin equation which includes multiplicative noise due to position-dependent mobility functions resulting from the Stokes equation. We present a numerical scheme which allows to simulate it with high accuracy for all model parameters, including shear rate and three parameters describing receptor geometry (distance, size and height of the receptor patches). In the case of homogeneous coating, the mean first passage time problem can be solved exactly. In the case of position-resolved receptor-ligand binding, we identify different scaling regimes and discuss their biological relevance., Comment: final version after minor revisions

We theoretically investigate the efficiency of initial binding between a receptor-coated sphere and a ligand-coated wall in linear shear flow. The mean first passage time for binding decreases monotonically with increasing shear rate. Above a saturation threshold of the order of a few 100 receptor patches, the binding efficiency is enhanced only weakly by increasing their number and size, but strongly by increasing their height. This explains why white blood cells in the blood flow adhere through receptor patches localized to the tips of microvilli, and why malaria-infected red blood cells form elevated receptor patches (knobs)., Comment: 4 pages, Revtex, 4 Postscript figures included, to appear in PRL

The effect of pressure on the zone-center optical phonon modes of antimony in the A7 structure has been investigated by Raman spectroscopy. The A_g and E_g frequencies exhibit a pronounced softening with increasing pressure, the effect being related to a gradual suppression of the Peierls-like distortion of the A7 phase relative to a cubic primitive lattice. Also, both Raman modes broaden significantly under pressure. Spectra taken at low temperature indicate that the broadening is at least partly caused by phonon-phonon interactions. We also report results of ab initio frozen-phonon calculations of the A_g and E_g mode frequencies. Presence of strong anharmonicity is clearly apparent in calculated total energy versus atom displacement relations. Pronounced nonlinearities in the force versus displacement relations are observed. Structural instabilities of the Sb-A7 phase are briefly addressed in the Appendix., Comment: 10 pages, 8 figures

Bistability is a major mechanism for cellular decision making and usually results from positive feedback in biochemical control systems. Here we show theoretically that bistability between unbound and bound states of adhesion clusters results from positive feedback mediated by structural rather than biochemical processes, namely by receptor-ligand dissociation and association dynamics which depend non-linearly on mechanical force and receptor-ligand separation. For small cell-matrix adhesions, we find rapid switching between unbound and bound states, which in the initial stages of adhesion allows the cell to explore its environment through many transient adhesions., Comment: Revtex, 3 pages, 3 postscript figures included, to appear in Biophysical Journal as Biophysical Letter

We report on results of electrical resistivity and structural investigations on the cubic modification of FeGe under high pressure. The long-wavelength helical order ($T_C=280$ K) is suppressed at a critical pressure $p_c\approx 19$ GPa. An anomaly in the resistivity data at $T_X(p)$ and strong deviations from a Fermi-liquid behavior in a wide pressure range above $p_c$ suggest that the suppression of $T_C$ disagrees with the standard notion of a quantum critical phase transition. The metallic ground state persisting at high pressure can be described by band-structure calculations if structural disorder due to zero-point motion is included. Discontinuous changes in the pressure dependence of the shortest Fe-Ge interatomic distance occurring close to the $T_C(p)$ phase line could be interpreted as a symmetry-conserving transition of first order., Comment: 4 pages, 4 figures

Compliant environments can mediate interactions between mechanically active cells like fibroblasts. Starting with a phenomenological model for the behaviour of single cells, we use extensive Monte Carlo simulations to predict non-trivial structure formation for cell communities on soft elastic substrates as a function of elastic moduli, cell density, noise and cell position geometry. In general, we find a disordered structure as well as ordered string-like and ring-like structures. The transition between ordered and disordered structures is controlled both by cell density and noise level, while the transition between string- and ring-like ordered structures is controlled by the Poisson ratio. Similar effects are observed in three dimensions. Our results suggest that in regard to elastic effects, healthy connective tissue usually is in a macroscopically disordered state, but can be switched to a macroscopically ordered state by appropriate parameter variations, in a way that is reminiscent of wound contraction or diseased states like contracture., Comment: 45 pages, 7 postscript figures included, revised version accepted for publication in Acta Biomaterialia

Single receptor-ligand bonds have finite lifetimes, so that biological systems can dynamically react to changes in their environment. In cell adhesion, adhesion bonds usually act cooperatively in adhesion clusters. Outside the cellular context, adhesion clusters can be probed quantitatively by attaching receptors and ligands to opposing surfaces. Here we present a detailed theoretical analysis of the stochastic dynamics of a cluster of parallel bonds under shared constant loading and with rebinding. Analytical solutions for the appropriate one-step master equation are presented for special cases, while the general case is treated with exact stochastic simulations. If the completely dissociated state is modeled as an absorbing boundary, mean cluster lifetime is finite and can be calculated exactly. We also present a detailed analysis of fluctuation effects and discuss various approximations to the full stochastic description., Comment: Revtex, 29 pages, 23 postscript figures included (some with reduced image quality)

We study the cooperative rupture of multiple adhesion bonds under shared linear loading. Simulations of the appropriate Master equation are compared with numerical integration of a rate equation for the mean number of bonds and its scaling analysis. In general, force-accelerated rupture is rather abrupt. For small clusters and slow loading, large fluctuations occur regarding the timepoint of final rupture, but not the typical shape of the rupture trajectory. For vanishing rebinding, our numerical results confirm three scaling regimes predicted before for cluster lifetime as a function of loading rate. For finite rebinding, the intermediate loading regime becomes irrelevant, and a sequence of two new scaling laws can be identified in the slow loading regime., Comment: Revtex, 6 pages, 4 postscript figures included

We solve the stochastic equations for a cluster of parallel bonds with shared constant loading, rebinding and the completely dissociated state as an absorbing boundary. In the small force regime, cluster lifetime grows only logarithmically with bond number for weak rebinding, but exponentially for strong rebinding. Therefore rebinding is essential to ensure physiological lifetimes. The number of bonds decays exponentially with time for most cases, but in the intermediate force regime, a small increase in loading can lead to much faster decay. This effect might be used by cell-matrix adhesions to induce signaling events through cytoskeletal loading., Comment: Revtex, 4 pages, 4 Postscript files included

Anchorage-dependent cells collect information on the mechanical properties of the environment through their contractile machineries and use this information to position and orient themselves. Since the probing process is anisotropic, cellular force patterns during active mechanosensing can be modelled as anisotropic force contraction dipoles. Their build-up depends on the mechanical properties of the environment, including elastic rigidity and prestrain. In a finite sized sample, it also depends on sample geometry and boundary conditions through image strain fields. We discuss the interactions of active cells with an elastic environment and compare it to the case of physical force dipoles. Despite marked differences, both cases can be described in the same theoretical framework. We exactly solve the elastic equations for anisotropic force contraction dipoles in different geometries (full space, halfspace and sphere) and with different boundary conditions. These results are then used to predict optimal position and orientation of mechanosensing cells in soft material., Comment: Revtex, 38 pages, 8 Postscript files included; revised version, accepted for publication in Phys. Rev. E

Adhering cells actively probe the mechanical properties of their environment and use the resulting information to position and orient themselves. We show that a large body of experimental observations can be consistently explained from one unifying principle, namely that cells strengthen contacts and cytoskeleton in the direction of large effective stiffness. Using linear elasticity theory to model the extracellular environment, we calculate optimal cell organization for several situations of interest and find excellent agreement with experiments for fibroblasts, both on elastic substrates and in collagen gels: cells orient in the direction of external tensile strain, they orient parallel and normal to free and clamped surfaces, respectively, and they interact elastically to form strings. Our method can be applied for rational design of tissue equivalents. Moreover our results indicate that the concept of contact guidance has to be reevaluated. We also suggest that cell-matrix contacts are upregulated by large effective stiffness in the environment because in this way, build-up of force is more efficient., Comment: Revtex, 7 pages, 4 Postscript files included

Amphiphiles are molecules which have both hydrophilic and hydrophobic parts. In water- and/or oil-like solvent, they self-assemble into extended sheet-like structures due to the hydrophobic effect. The free energy of an amphiphilic system can be written as a functional of its interfacial geometry, and phase diagrams can be calculated by comparing the free energies following from different geometries. Here we focus on bicontinuous structures, where one highly convoluted interface spans the whole sample and thereby divides it into two separate labyrinths. The main models for surfaces of this class are triply periodic minimal surfaces, their constant mean curvature and parallel surface companions, and random surfaces. We discuss the geometrical properties of each of these types of surfaces and how they translate into the experimentally observed phase behavior of amphiphilic systems., Comment: Review, 50 pages, Latex, 7 PS figures included, 7 large PS figures left out. appeared in: Morphology of Condensed Matter: Physics and Geometry of Spatially Complex Systems, eds. K. R. Mecke and D. Stoyan, Springer Lecture Notes in Physics vol. 600, pp. 107-151 (2002)

When sheets of layered material like C, WS$_2$ or BN are restricted to finite sizes, they generally form single- and multi-walled hollow nanoparticles in order to avoid dangling bonds. Using continuum approaches to model elastic deformation and van der Waals interactions of spherical nanoparticles, we predict the variation of mechanical stability, adhesive properties and phase behavior with radius $R$ and thickness $h$. We find that mechanical stability is limited by forces in the nN range and pressures in the GPa range. Adhesion energies scale linearly with $R$, but depend only weakly on $h$. Deformation due to van der Waals adhesion occurs for single-walled particles for radii of few nm, but is quickly suppressed for increasing thickness. As $R$ is increased, the gas-liquid coexistence disappears from the phase diagram for particle radii in the range of 1-3 nm (depending on wall thickness) since the interaction range decreases like 1/R., Comment: Latex, 6 pages, 3 Postscript files included

Biological cells in soft materials can be modeled as anisotropic force contraction dipoles. The corresponding elastic interaction potentials are long-ranged ($\sim 1/r^3$ with distance $r$) and depend sensitively on elastic constants, geometry and cellular orientations. On elastic substrates, the elastic interaction is similar to that of electric quadrupoles in two dimensions and for dense systems leads to aggregation with herringbone order on a cellular scale. Free and clamped surfaces of samples of finite size introduce attractive and repulsive corrections, respectively, which vary on the macroscopic scale. Our theory predicts cell reorientation on stretched elastic substrates., Comment: Revtex, 6 pages, 2 Postscript files included, to appear in Phys. Rev. Lett

Inverse bicontinuous cubic phases are ubiquitous in lipid-water mixtures and consist of a lipid bilayer forming a cubic minimal surface, thereby dividing space into two cubic networks of water channels. For small hydrocarbon chain lengths, the monolayers can be modeled as parallel surfaces to a minimal midsurface. The bending energy of the cubic phases is determined by the distribution of Gaussian curvature over the minimal midsurfaces which we calculate for seven different structures (G, D, P, I-WP, C(P), S and F-RD). We show that the free-energy densities of the structures G, D and P are considerably lower than those of the other investigated structures due to their narrow distribution of Gaussian curvature. The Bonnet transformation between G, D, and P implies that these phases coexist along a triple line, which also includes an excess water phase. Our model includes thermal membrane undulations. Our qualitative predictions remain unchanged when higher order terms in the curvature energy are included. Calculated phase diagrams agree well with the experimental results for 2:1 lauric acid/dilauroyl phosphatidylcholine and water., Comment: Revtex, 23 pages with 9 postscript figures included, to appear in Langmuir

Effective pair potentials for hollow nanoparticles like the ones made from carbon (fullerenes) or metal dichalcogenides (inorganic fullerenes) consist of a hard core repulsion and a deep, but short-ranged, van der Waals attraction. We investigate them for single- and multi-walled nanoparticles and show that in both cases, in the limit of large radii the interaction range scales inversely with the radius, $R$, while the well depth scales linearly with $R$. We predict the values of the radius $R$ and the wall thickness $h$ at which the gas-liquid coexistence disappears from the phase diagram. We also discuss unusual material properties of the solid, which include a large heat of sublimation and a small surface energy., Comment: Revtex, 13 pages with 8 Postscript files included, submitted to Phys. Rev. E

We investigate the stability of seven inverse bicontinuous cubic phases ($G$, $D$, $P$, $C(P)$, $S$, $I-WP$, $F-RD$) in lipid-water mixtures based on a curvature model of membranes. Lipid monolayers are described by parallel surfaces to triply periodic minimal surfaces. The phase behavior is determined by the distribution of the Gaussian curvature on the minimal surface and the porosity of each structure. Only $G$, $D$ and $P$ are found to be stable, and to coexist along a triple line. The calculated phase diagram agrees very well with experimental results for 2:1 lauric acid/DLPC., Comment: Revtex, 4 pages with 3 EPS-figures included

Multi-walled hollow nanoparticles made from tungsten disulphide (WS$_2$) show exceptional tribological performance as additives to liquid lubricants due to effective transfer of low shear strength material onto the sliding surfaces. Using a scaling approach based on continuum elasticity theory for shells and pairwise summation of van der Waals interactions, we show that van der Waals interactions cause strong adhesion to the substrate which favors release of delaminated layers onto the surfaces. For large and thin nanoparticles, van der Waals adhesion can cause considerable deformation and subsequent delamination. For the thick WS$_2$ nanoparticles, deformation due to van der Waals interactions remains small and the main mechanism for delamination is pressure which in fact leads to collapse beyond a critical value. We also discuss the effect of shear flow on deformation and rolling on the substrate., Comment: Latex, 13 pages with 3 Postscript figures included, to appear in Europhysics Letters

We study the phase behavior of ternary amphiphilic systems in the framework of a curvature model with non-vanishing spontaneous curvature. The amphiphilic monolayers can arrange in different ways to form micellar, hexagonal, lamellar and various bicontinuous cubic phases. For the latter case we consider both single structures (one monolayer) and double structures (two monolayers). Their interfaces are modeled by the triply periodic surfaces of constant mean curvature of the families G, D, P, C(P), I-WP and F-RD. The stability of the different bicontinuous cubic phases can be explained by the way in which their universal geometrical properties conspire with the concentration constraints. For vanishing saddle-splay modulus $\bar \kappa$, almost every phase considered has some region of stability in the Gibbs triangle. Although bicontinuous cubic phases are suppressed by sufficiently negative values of the saddle-splay modulus $\bar \kappa$, we find that they can exist for considerably lower values than obtained previously. The most stable bicontinuous cubic phases with decreasing $\bar \kappa < 0$ are the single and double gyroid structures since they combine favorable topological properties with extreme volume fractions., Comment: Revtex, 23 pages with 10 Postscript files included, to appear in J. Chem. Phys. 112 (6) (February 2000)

We analyze the variability in the X-ray lightcurves of the black hole candidate Cygnus X-1 by linear and nonlinear time series analysis methods. While a linear model describes the over-all second order properties of the observed data well, surrogate data analysis reveals a significant deviation from linearity. We discuss the relation between shot noise models usually applied to analyze these data and linear stochastic autoregressive models. We debate statistical and interpretational issues of surrogate data testing for the present context. Finally, we suggest a combination of tools from linear andnonlinear time series analysis methods as a procedure to test the predictions of astrophysical models on observed data., Comment: 15 pages, to appear in Phys. Rev. E

By driving with a microwave pulse the lowest frequency antiferromagnetic resonance of the quasi 1-D biaxial antiferromagnet (C_2 H_5 NH_3)_2 CuCl_4 into an unstable region intrinsic localized spin waves have been generated and detected in the spin wave gap. These findings are consistent with the prediction that nonlinearity plus lattice discreteness can lead to localized excitations with dimensions comparable to the lattice constant., Comment: 10 pages, 4 figures, accepted for publication in Physical Review Letters

The Fourier approach and theories of space groups and color symmetries are used to systematically generate and compare bicontinuous cubic structures in the framework of a Ginzburg-Landau model for ternary amphiphilic systems. Both single and double structures are investigated; they correspond to systems with one or two monolayers in a unit cell, respectively. We show how and why single structures can be made to approach triply periodic minimal surfaces very closely, and give improved nodal approximations for G, D, I-WP and P surfaces. We demonstrate that the relative stability of the single structures can be calculated from the geometrical properties of their interfaces only. The single gyroid G turns out to be the most stable bicontinuous cubic phase since it has the smallest porosity. The representations are used to calculate distributions of the Gaussian curvature and 2H-NMR bandshapes for C(P), C(D), S, C(Y) and F-RD surfaces., Comment: Revtex, 24 pages with 13 EPS-figures included, to appear in Phys. Rev. E 59(5) (May 1999)

We present observations of the (field of the) Seyfert galaxy Mark290, which probes the high-velocity cloud (HVC) complex C, one of the largest HVCs. We find that this object has a metallicity of 0.094pm0.020(+0.022-0.019) times solar. We determine a lower limit to its distance of 5 kpc (z>3.5 kpc). If the gas is in thermal equilibrium with a hot halo, then it is also likely that D<30 kpc, putting the HVC in the Galactic Halo, as was the case for HVC complex~A (for which z=2.5--7 kpc). We find that, on this sightline, H+ represents 23pm10% of the hydrogen in the HVC. The total gaseous mass is 2x10^6 (D/5 kpc)^2 Msun and, depending on whether the space velocity is completely radial or vertical, the HVC represents a downward mass flux of ~0.036-0.083 (D/5 kpc) Msun/yr, or 2.9--6.7x10^{-3} (D/5 kpc)^{-1} Msun/yr/kpc^2. The low metallicity and large mass suggest that complex C is unlikely to be part of a Galactic Fountain, but rather represents accreting low-metallicity material. It may be a present-day analogue of the damped Ly-alpha absorbers seen in QSO spectra. Our abundance result provides the first direct observational evidence for the infall of low-metallicity gas on the Milky Way, required in models of galactic chemical evolution. It remains to be seen whether ultimately complex C is a remnant of the formation of the Milky Way (Oort 1970), a gas cloud orbiting the Galaxy (Kerr & Sullivan 1969), a Local Group object (Verschuur 1969, Blitz et al. 1996), the result of tidal interactions between the Magellanic System and the Galaxy >3 Gyr ago (an "Old Magellanic Stream"; Toomre, quoted in Kerr & Sullivan 1969), or was formed when hot, ionized intergalactic gas was compressed by the motion of the Milky Way (Silk et al. 1987)., Comment: 13 pages; LaTeX; to be published in: Proceedings of the High-Velocity Cloud workshop, eds. B.K. Gibson, T.S. Axelrod and M.E. Putman (ASP Conf. Ser.)

We study the dependence of the phase behavior of ternary amphiphilic systems on composition and temperature. Our analysis is based on a curvature elastic model of the surfactant film with sufficiently large spontaneous curvature and sufficiently negative saddle-splay modulus that the stable phases are the lamellar phase and a droplet microemulsion. In addition to the curvature energy, we consider the contributions to the free energy of the long-ranged van der Waals interaction and of the undulation modes. We find that for bending rigidities of order k_B T, the lamellar phase extends further and further into the water apex of the phase diagram as the phase inversion temperature is approached, in good agreement with experimental results., Comment: LaTeX2e, 11 pages with references and 2 eps figures included, submitted to Europhys. Lett