Search

The integration of advanced materials and photonic nanostructures can lead to enhanced biodetection capabilities, crucial in clinical scenarios and point-of-care diagnostics, where simplified strategies are essential. Herein, a molecularly imprinted polymer (MIP) photonic nanostructure is demonstrated, which selectively binding to transforming growth factor-beta (TGF-β), in which the sensing transduction is enhanced by bound states in the continuum (BICs). The MIP operating as a synthetic antibody matrix and coupled with BIC resonance, enhances the optical response to TGF-β at imprinted sites, leading to an augmented detection capability, thoroughly evaluated through spectral shift and optical lever analogue readout. The validation underscores the MIP-BIC sensor capability to detect TGF-β in spiked saliva, achieving a limit of detection of 10 fM and a resolution of 0.5 pM at physiological concentrations, with a precision of two orders of magnitude above discrimination threshold in patients. The MIP tailored selectivity is highlighted by an imprinting factor of 52, showcasing the sensor resistance to interference from other analytes. The MIP-BIC sensor architecture streamlines the detection process eliminating the need for complex sandwich immunoassays and demonstrates the potential for high-precision quantification. This positions the system as a robust tool for biomarker detection, especially in real-world diagnostic scenarios.

Photonic bound states in the continuum (BICs), embedded in the spectrum of free-space waves1,2 with diverging radiative quality factor, are topologically non-trivial dark modes in open-cavity resonators that have enabled important advances in photonics3,4. However, it is particularly challenging to achieve maximum near-field enhancement, as this requires matching radiative and non-radiative losses. Here we propose the concept of supercritical coupling, drawing inspiration from electromagnetically induced transparency in near-field coupled resonances close to the Friedrich-Wintgen condition2. Supercritical coupling occurs when the near-field coupling between dark and bright modes compensates for the negligible direct far-field coupling with the dark mode. This enables a quasi-BIC field to reach maximum enhancement imposed by non-radiative loss, even when the radiative quality factor is divergent. Our experimental design consists of a photonic-crystal nanoslab covered with upconversion nanoparticles. Near-field coupling is finely tuned at the nanostructure edge, in which a coherent upconversion luminescence enhanced by eight orders of magnitude is observed. The emission shows negligible divergence, narrow width at the microscale and controllable directivity through input focusing and polarization. This approach is relevant to various physical processes, with potential applications for light-source development, energy harvesting and photochemical catalysis.

Hyperglycemia and rash are expected but challenging adverse events of phosphatidylinositol-3-kinase inhibition (such as with alpelisib). Two modified Delphi panels were conducted to provide consensus recommendations for managing hyperglycemia and rash in patients taking alpelisib. Experts rated the appropriateness of interventions on a 1-to-9 scale; median scores and dispersion were used to classify the levels of agreement. Per the hyperglycemia panel, it is appropriate to start alpelisib in patients with HbA1c 6.5% (diabetes) to

Point defects in two-dimensional materials are of key interest for quantum information science. However, the parameter space of possible defects is immense, making the identification of high-performance quantum defects very challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS2, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur (Co S0 ) and fabricate it with scanning tunneling microscopy (STM). The Co S0 electronic structure measured by STM agrees with first principles and showcases an attractive quantum defect. Our work shows how HT computational screening and nanoscale synthesis routes can be combined to design promising quantum defects.

Abstract Probing strongly coupled quasiparticle excitations at their intrinsic length scales offers unique insights into their properties and facilitates the design of devices with novel functionalities. In this work, we investigate the formation and emission characteristics of plexcitons, arising from the interaction between surface plasmons in narrow gold nanotrenches and excitons in monolayer WSe2. We study this strong plasmon–exciton coupling in both the far-field and the near-field. Specifically, we observe a Rabi splitting in the far-field reflection spectra of about 80 meV under ambient conditions, consistent with our theoretical modeling. Using a custom-designed near-field probe, we find that plexciton emission originates predominantly from the lower-frequency branch, which we can directly probe and map its local field distribution. We precisely determine the plexcitonʼs spatial extension, similar to the trench width, with nanometric precision by collecting spectra at controlled probe locations. Our work opens exciting prospects for nanoscale mapping and engineering of plexcitons in complex nanostructures with potential applications in nanophotonic devices, optoelectronics, and quantum electrodynamics in nanoscale cavities.

Inverse design is a powerful tool in wave physics for compact, high-performance devices. To date, applications in photonics have mostly been limited to linear systems and it has rarely been investigated or demonstrated in the nonlinear regime. In addition, the “black box” nature of inverse design techniques has hindered the understanding of optimized inverse-designed structures. We propose an inverse design method with interpretable results to enhance the efficiency of on-chip photon generation rate through nonlinear processes by controlling the effective phase-matching conditions. We fabricate and characterize a compact, inverse-designed device using a silicon-on-insulator platform that allows a spontaneous four-wave mixing process to generate photon pairs at a rate of 1.1 MHz with a coincidence to accidental ratio of 162. Our design method accounts for fabrication constraints and can be used for scalable quantum light sources in large-scale communication and computing applications.

Abstract: Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS2, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur (Co$_{\rm S}^{0}$) as very promising and fabricate it with scanning tunneling microscopy (STM). The Co$_{\rm S}^{0}$ electronic structure measured by STM agrees with first principles and showcases an attractive new quantum defect. Our work shows how HT computational screening and novel defect synthesis routes can be combined to design new quantum defects.

Molybdenum disulfide (MoS2) is a popular lamellar material with desirable properties who's form, and function can vary widely, from particles to monolayer/μm thick films and applications in semiconductors to aerospace lubricants and many more. Physical vapor deposition (PVD) is commonly used to produce dense, conformal micron thick MoS2 coatings, but lacks the ability to coat more complex geometries due to line-of-sight constraints and typically exhibit amorphous or nanocrystalline microstructures. Atomic layer deposition (ALD) has also been employed to deposit monolayer to 10's of nanometers thick lamellar solids like MoS2 & WS2 in transistor, sensors or electrocatalyst applications but not commonly for applications as solid lubricants in aerospace like their PVD counterparts. While recent work has shown that ALD MoS2 can exhibit favorable microstructures for solid lubricant applications and allows for non-line of sight deposition on complex geometries, it has not been widely adopted due to high deposition temperatures (>500 °C) that can lead to softening of steel substrates. In this work, we show one of the first applications highlighting the use of ultra-thin (5–10 nm) low temperature (∼250 °C) MoS2 coatings as a promising solid lubricant for macroscale mechanical interfaces. Post-deposition chemical conversion of ALD MoOx to MoS2 by annealing in H2S at temperatures ranging from 200 to 550 °C resulted in highly-ordered basally-oriented surface microstructures. The results from this work suggest that converted-ALD MoS2 coatings can serve as viable solid lubricants for aerospace applications requiring low-temperature processing, including those with complex geometries.

Tip-enhanced photoluminescence (TRPL) is a powerful technique for spatially and spectrally probing local optical properties of 2-dimensional (2D) materials that are modulated by the local heterogeneities, revealing inaccessible dark states due to bright state overlap in conventional far-field microscopy at room temperature. While scattering-type near-field probes have shown the potential to selectively enhance and reveal dark exciton emission, their technical complexity and sensitivity can pose challenges under certain experimental conditions. Here, we present a highly reproducible and easy-to-fabricate near-field probe based on nanoimprint lithography and fiber-optic excitation and collection. The novel near-field measurement configuration provides an ∼3 orders of magnitude out-of-plane Purcell enhancement, diffraction-limited excitation spot, and subdiffraction hyperspectral imaging resolution (below 50 nm) of dark exciton emission. The effectiveness of this high spatial XD mapping technique was then demonstrated through reproducible hyperspectral mapping of oxidized sites and bubble areas.

Abstract The integration of advanced materials and photonic nanostructures can lead to enhanced biodetection capabilities, crucial in clinical scenarios and point‐of‐care diagnostics, where simplified strategies are essential. Herein, a molecularly imprinted polymer (MIP) photonic nanostructure is demonstrated, which selectively binding to transforming growth factor‐beta (TGF‐β), in which the sensing transduction is enhanced by bound states in the continuum (BICs). The MIP operating as a synthetic antibody matrix and coupled with BIC resonance, enhances the optical response to TGF‐β at imprinted sites, leading to an augmented detection capability, thoroughly evaluated through spectral shift and optical lever analogue readout. The validation underscores the MIP‐BIC sensor capability to detect TGF‐β in spiked saliva, achieving a limit of detection of 10 fM and a resolution of 0.5 pM at physiological concentrations, with a precision of two orders of magnitude above discrimination threshold in patients. The MIP tailored selectivity is highlighted by an imprinting factor of 52, showcasing the sensor resistance to interference from other analytes. The MIP‐BIC sensor architecture streamlines the detection process eliminating the need for complex sandwich immunoassays and demonstrates the potential for high‐precision quantification. This positions the system as a robust tool for biomarker detection, especially in real‐world diagnostic scenarios.

Summary: To gain insight into how an adjuvant impacts vaccination responses, we use systems immunology to study human H5N1 influenza vaccination with or without the adjuvant AS03, longitudinally assessing 14 time points including multiple time points within the first day after prime and boost. We develop an unsupervised computational framework to discover high-dimensional response patterns, which uncover adjuvant- and immunogenicity-associated early response dynamics, including some that differ post prime versus boost. With or without adjuvant, some vaccine-induced transcriptional patterns persist to at least 100 days after initial vaccination. Single-cell profiling of surface proteins, transcriptomes, and chromatin accessibility implicates transcription factors in the erythroblast-transformation-specific (ETS) family as shaping these long-lasting signatures, primarily in classical monocytes but also in CD8+ naive-like T cells. These cell-type-specific signatures are elevated at baseline in high-antibody responders in an independent vaccination cohort, suggesting that antigen-agnostic baseline immune states can be modulated by vaccine antigens alone to enhance future responses.

Carrier and phonon dynamics in a multilayer WSe2 film are captured by extreme ultraviolet (XUV) transient absorption (TA) spectroscopy at the W N6,7, W O2,3, and Se M4,5 edges (30-60 eV). After the broadband optical pump pulse, the XUV probe directly reports on occupations of optically excited holes and phonon-induced band renormalizations. When compared with density functional theory calculations, XUV transient absorption due to holes is identified below the W O3 edge whereas signals at the Se M4,5 edges are dominated by phonon dynamics. Therein, 0.4 ps hole relaxation time, 1.5 ps carrier recombination time, and 1.7 ps phonon heating time are extracted. The acquisition of hole and phonon-induced signals in a single experiment can facilitate the investigation of the correlations between electron and phonon dynamics. Furthermore, the simultaneous observation of signals from different elements can be further extended to explore photochemical processes in multilayers and alloys, thereby providing key information for their applications in electronics, photocatalysts, and spintronics.

The ability to correlate optical hyperspectral mapping and high resolution topographic imaging is critically important to gain deep insight into the structure-function relationship of nanomaterial systems. Scanning near-field optical microscopy can achieve this goal, but at the cost of significant effort in probe fabrication and experimental expertise. To overcome these two limitations, we have developed a low-cost and high-throughput nanoimprinting technique to integrate a sharp pyramid structure on the end facet of a single-mode fiber that can be scanned with a simple tuning-fork technique. The nanoimprinted pyramid has two main features: (1) a large taper angle (∼70°), which determines the far-field confinement at the tip, resulting in a spatial resolution of 275 nm, an effective numerical aperture of 1.06, and (2) a sharp apex with a radius of curvature of ∼20 nm, which enables high resolution topographic imaging. Optical performance is demonstrated through evanescent field distribution mapping of a plasmonic nanogroove sample, followed by hyperspectral photoluminescence mapping of nanocrystals using a fiber-in-fiber-out light coupling mode. Through comparative photoluminescence mapping on 2D monolayers, we also show a threefold improvement in spatial resolution over chemically etched fibers. These results show that the bare nanoimprinted near-field probes provide simple access to spectromicroscopy correlated with high resolution topographic mapping and have the potential to advance reproducible fiber-tip-based scanning near-field microscopy.

Abstract Point defects in two-dimensional materials are of key interest for quantum information science. However, the parameter space of possible defects is immense, making the identification of high-performance quantum defects very challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS2, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur ( $${\rm{Co}}_{{{{{{{{\rm{S}}}}}}}}}^{0}$$ Co S 0 ) and fabricate it with scanning tunneling microscopy (STM). The $${\rm{Co}}_{{{{{{{{\rm{S}}}}}}}}}^{0}$$ Co S 0 electronic structure measured by STM agrees with first principles and showcases an attractive quantum defect. Our work shows how HT computational screening and nanoscale synthesis routes can be combined to design promising quantum defects.

Abstract Background In 2017, we published an article addressing drug shortages (DS) in Israel, exploring regulatory perspectives, challenges, and potential solutions. Since then, DS remain a significant concern for patients, healthcare providers, and policymakers globally. In this updated article, we revisit the topic, providing new insights, data, and analysis on the current DS landscape in Israel, efforts to mitigate them, and propose strategies to combat this escalating issue. Methods We conducted a comprehensive search of the Israeli Ministry of Health (MOH) DS database, spanning from 2014 to the present. We extracted DS numbers and their reasons. Further searches on the Israeli MOH website, pharmaceutical division archives, and the internet yielded official MOH publications and correspondence regarding regulatory responses to DS from 2017 onwards. Additionally, two specific cases of DS were examined to analyze their handling. Recent activities and publications from the Israeli MOH aimed at reducing DS were also reviewed. Results Between 2014 and 2022, DS surged 2.66-fold. Total DS were 3228; 672 due to commercial reasons, and 2556 to operational reasons (20.5% and 79.5% respectively). The average duration of intermittent DS increased 1.56-fold, from 85 to 133 days. Manufacturers informed the MOH 22 days prior to actual shortage on average. Analyzing 2022's DS (640) by ATC groups, prominent categories included nervous system drugs (18%), drugs acting on the alimentary tract and metabolism (14%), and dermatologicals (11%). Operational DS in 2022 (n = 564) were primarily due to stock delivery delays (38%), stock over-utilization (12%), and raw material shortages (9%). Sixteen official MOH publications on DS were identified from 2017 onwards. Moreover, two high-impact DS case studies were examined. Conclusion Despite routine monitoring by the Israeli MOH and updating the DS policy throughout this period, DS persist, intensifying annually and posing serious health risks. This trend mirrors international patterns, affecting countries globally. In Israel's uniquely structured healthcare system, with its swift stakeholder cooperation and implementation capabilities, more effective DS management is conceivable. We propose ten universally applicable rules to address DS challenges.

High capacity polymer dielectrics that operate with high efficiencies under harsh electrification conditions are essential components for advanced electronics and power systems. It is, however, fundamentally challenging to design polymer dielectrics that can reliably withstand demanding temperatures and electric fields, which necessitate the balance of key electronic, electrical and thermal parameters. Herein, we demonstrate that polysulfates, synthesized by sulfur(VI) fluoride exchange (SuFEx) catalysis, another near-perfect click chemistry reaction, serve as high-performing dielectric polymers that overcome such bottlenecks. Free-standing polysulfate thin films from convenient solution processes exhibit superior insulating properties and dielectric stability at elevated temperatures, which are further enhanced when ultrathin (~5 nm) oxide coatings are deposited by atomic layer deposition. The corresponding electrostatic film capacitors display high breakdown strength (>700 MV m-1) and discharged energy density of 8.64 J cm-3 at 150 °C, outperforming state-of-the-art free-standing capacitor films based on commercial and synthetic dielectric polymers and nanocomposites.

INTRODUCTION: Psychedelic-assisted therapy with psilocybin has shown promise in Phase 2 trials for alcohol use disorder (AUD). Set and setting, particularly factors facilitating a connection with nature, may positively influence the psychedelic experience and therapeutic outcomes. But to date, randomized controlled trials of interventions to enhance set and setting for psychedelic-assisted therapy are lacking. METHODS: This was a pilot randomized, controlled trial of Visual Healing, a nature-themed video intervention to optimize set and setting, versus Standard set and setting procedures with two open-label psilocybin 25 mg dosing sessions among 20 participants with AUD. For the first session, participants randomized to Visual Healing viewed nature-themed videos during the preparation session and the ascent and descent phases of the psilocybin dosing session while participants randomized to the Standard condition completed a meditation during the preparatory session and wore eyeshades and listened to a music playlist throughout the dosing session. For the second session 4 weeks later, participants chose either Visual Healing or Standard procedures. Primary outcomes were feasibility, safety, and tolerability of Visual Healing. Secondary and exploratory outcomes were changes in alcohol use, psychedelic effects, anxiety and stress. RESULTS: Nineteen of 20 (95%) randomized participants (mean age 49 ± 11 years, 60% female) completed the 14-week study. During the first psilocybin session, participants viewed an average of 37.9 min of the 42-min video and there were no video-related adverse events. Peak increase in post-psilocybin blood pressure was significantly less for participants randomly assigned to Visual Healing compared to Standard procedures. Alcohol use decreased significantly in both Visual Healing and Standard groups and psychedelic effects, stress, and anxiety were similar between groups. DISCUSSION: In this open-label pilot study, viewing Visual Healing videos during preparation and psilocybin dosing sessions was feasible, safe, and well-tolerated among participants with AUD. Preliminary findings suggest that Visual Healing has potential to reduce the cardiovascular risks of psychedelic therapy, without interfering with the psychedelic experience or alcohol-related treatment outcomes. Studies to replicate our findings as well as studies of different set and setting interventions with other psychedelic medications and indications are warranted.

Silicon is the most scalable optoelectronic material but has suffered from its inability to generate directly and efficiently classical or quantum light on-chip. Scaling and integration are the most fundamental challenges facing quantum science and technology. We report an all-silicon quantum light source based on a single atomic emissive center embedded in a silicon-based nanophotonic cavity. We observe a more than 30-fold enhancement of luminescence, a near-unity atom-cavity coupling efficiency, and an 8-fold acceleration of the emission from the all-silicon quantum emissive center. Our work opens immediate avenues for large-scale integrated cavity quantum electrodynamics and quantum light-matter interfaces with applications in quantum communication and networking, sensing, imaging, and computing.

The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal-ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. We then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.

Summary:. Gigantomastia presents a unique set of challenges for preservation of the nipple–areola complex in patients undergoing reduction mammaplasty. Historically an indication for breast amputation and free nipple graft (FNG), gigantomastia is now commonly treated using pedicle-based reconstruction. We present a case combining these two surgical techniques, using an inferior-pedicle reduction with an FNG in the management of extreme breast hypertrophy with 11,300 g in total resected. This case report shows that such a technique for gigantomastia reductions can combine the aesthetic benefits of a pedicled reduction with the reliability of FNGs. These benefits make the hybrid inferior pedicle reduction a useful option, which should be present in every plastic surgeon’s armamentarium when caring for these patients.