Search

Synthetic opals, a composition of homogeneous silica spheres in the mesoscale size range, have attracted the attention of scientists due to their favorable chemical and physical properties. Their chemical inertness and stability, biocompatibility, homogeneity, elevated specific surface area, and ease of functionalization of their surfaces make them a versatile nanotool. In the present study, the Stöber process was used to investigate the effect of parameters, such as reagent concentration and synthesis temperature, on the resulting silica particle size and structure. The optimal conditions for successfully obtaining homogeneous particles in the mesoscale range with high reproducibility were investigated. Several synthesis procedures and their dependence on the reaction temperature were presented to allow the selection of the assumed diameter of silica spheres. The numerous samples obtained were examined for size, homogeneity, structure, and specific surface area. On the basis of specific surface area measurements and nuclear magnetic resonance studies, the internal hierarchical structure of the spherical silica was confirmed as consisting of a solid core and layers of secondary spheres covered by a solid shell. Structural studies (X-ray Spectroscopy, X-ray Absorption Near-Edge Structure, and nuclear magnetic resonance), together with infrared vibrational spectroscopy, showed no dependence of the structure of the obtained mesospheres on the concentration of reagents and the size of the obtained particles.

In this article, we describe the antimicrobial properties of pristine anodised aluminium oxide matrices-the material many consider biologically inert. During a typical anodisation process, chromium and chlorine compounds are used for electropolishing and the removal of the first-step aluminium oxide. Matrices without the use of those harmful compounds were also fabricated and tested for comparison. The antibacterial tests were conducted on four strains of Escherichia coli : K12, R2, R3 and R4. The properties of the matrices were also compared to the three types of antibiotics: ciprofloxacin, bleomycin and cloxacillin using the Minimal Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) tests. Moreover, DNA was isolated from the analysed bacteria which was additionally digested with formamidopyrimidine-DNA glycosylase (Fpg) protein from the group of repair glycosases. These enzymes are markers of modified oxidised bases in nucleic acids produced during oxidative stress in cells. Preliminary cellular studies, MIC and MBC tests and digestion with Fpg protein after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than the aforementioned antibiotics. The described composites are highly specific for the analysed model Escherichia coli strains and may be used in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the progressing pandemic era. The results show much stronger antibacterial properties of the functionalised membranes on the action of bacterial membranes in comparison to the antibiotics in the Fpg digestion experiment. This is most likely due to the strong induction of oxidative stress in the cell through the breakdown of the analysed bacterial DNA.

In this article, we describe the antimicrobial properties of a new composite based on anodic aluminium oxide (AAO) membranes containing propyl-copper-phosphonate units arranged at a predetermined density inside the AAO channels. The samples were prepared with four concentrations of copper ions and tested as antimicrobial drug on four different strains of Escherichia coli (K12, R2, R3 and R4). For comparison, the same strains were tested with three types of antibiotics using the minimal inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) tests. Moreover, DNA was isolated from the analysed bacteria which was additionally digested with formamidopyrimidine-DNA glycosylase (Fpg) protein from the group of repair glycosases. These enzymes are markers of modified oxidised bases in nucleic acids produced during oxidative stress in cells. Preliminary cellular studies, MIC and MBC tests and digestion with Fpg protein after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than antibiotics such as ciprofloxacin, bleomycin and cloxacillin. The described composites are highly specific for the analysed model Escherichia coli strains and may be used in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the progressing pandemic era. The results show much stronger antibacterial properties of the functionalised membranes on the action of bacterial membranes in comparison to the antibiotics in the Fpg digestion experiment. This is most likely due to the strong induction of oxidative stress in the cell through the breakdown of the analysed bacterial DNA. We have also observed that the intermolecular distances between the functional units play an important role for the antimicrobial properties of the used material. Hence, we utilised the idea of the 2D solvent to tailor them.

We present an experimental study of the longitudinal and transverse relaxation of ensembles of negatively charged nitrogen-vacancy (NV-) centers in a diamond monocrystal prepared by 1.8 MeV proton implantation. The focused proton beam was used to introduce vacancies at a 20 µµm depth layer. Applied doses were in the range of 1.5×1013 to 1.5×1017 ions/cm2. The samples were subsequently annealed in vacuum which resulted in a migration of vacancies and their association with the nitrogen present in the diamond matrix. The proton implantation technique proved versatile to control production of nitrogen-vacancy color centers in thin films.

The ability to organize, separate and manipulate individual molecules and ions on a surface opens up almost unlimited opportunities. However, it often requires complex techniques and a proper support material. With this in mind, we show a new concept of 2D solid solvents and review a simple and efficient procedure which is based on nanostructured forms of silica with anchoring units. We describe silica supports, such as spherical nanoparticles and mesoporous silica structures, as well as review the methods for chemical modification of the surface of silica with the functional groups. Finally, we present a few particular examples of the immobilization of molecules and ions on the surface of 2D solid solvents along with the experimental investigation of the obtained materials.

Self-supported and flexible bacterial cellulose (BC) based hybrid membranes were synthesized and decorated with zinc oxide/multi-walled carbon nanotube (ZnO-MWCNT) composite additives in order to modify and tune their surface and bulk properties. Two types of ZnO-MWCNT additives with different morphologies were used in a wide concentration range from 0 to 90% for BC-based hybrids produced by filtration. The interaction between BC and ZnO-MWCNT and the effect of concentration and morphology of additives on the properties like zeta potential, hydrophilicity, electrical conductivity, etc. would be an important factor in various applications. Furthermore, the as-prepared hybrid membranes were characterized with the use of scanning electron microscopy (SEM), focused ion beam scanning electron microscopy (FIB-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray powder diffraction (XRD) and surface area measurement (BET). Applying the presented synthesis routes, the surface properties of BC-based membranes can be tailored easily. Results reveal that the as-prepared BC-ZnO-MWCNT hybrid membranes can be ideal candidates for different kinds of applications, such as water filtration or catalysts., Competing Interests: We declare we have no competing interests., (© 2020 The Authors.)

Electronics, and nanoelectronics in particular, represent one of the most promising branches of technology. The search for novel and more efficient materials seems to be natural here. Thus far, silicon-based devices have been monopolizing this domain. Indeed, it is justified since it allows for significant miniaturization of electronic elements by their densification in integrated circuits. Nevertheless, silicon has some restrictions. Since this material is applied in the bulk form, the miniaturization limit seems to be already reached. Moreover, smaller silicon-based elements (mainly processors) need much more energy and generate significantly more heat than their larger counterparts. In our opinion, the future belongs to nanostructured materials where a proper structure is obtained by means of bottom-up nanotechnology. A great example of a material utilizing nanostructuring is mesoporous silica, which, due to its outstanding properties, can find numerous applications in electronic devices. This focused review is devoted to the application of porous silica-based materials in electronics. We guide the reader through the development and most crucial findings of porous silica from its first synthesis in 1992 to the present. The article describes constant struggle of researchers to find better solutions to supercapacitors, lower the k value or redox-active hybrids while maintaining robust mechanical properties. Finally, the last section refers to ultra-modern applications of silica such as molecular artificial neural networks or super-dense magnetic memory storage.

The Mn 12 single-molecule magnets (SMMs) could be attached to the surface of spherical silica for the first time with a high probability. This allowed separation of the individual molecular magnets and direct microscopic observation of the SMMs. We described in detail how to fabricate such a composite material. The synthesis procedure proposed here is simple and efficient. We confirmed the efficiency of the method by transmission electron microscopy (TEM): single-molecule magnets were visible at the surface of a silica substrate. Based on TEM observation, we described how the molecules anchor to the surface of silica (the geometry of the magnetic molecule in regard to the surface of the substrate). The SQUID magnetometry showed that single-molecule magnet behaviour is kept intact after grafting. The attachment of the single-molecule magnets to the surface of silica allows to investigate their properties as separate molecules. This is particularly important in the analysis of magnetic properties such as magnetic states of the separated SMMs, their mutual interactions, and the influence of a silica support.

Membrane separation is proved to be a powerful tool for several applications such as wastewater treatment or the elimination of various microorganisms from drinking water. In this study, the efficiency of inorganic composite-based multi-walled carbon nanotube (MWCNT) hybrid membranes was investigated in the removal of MS2 bacteriophages from contaminated water. With this object, multi-walled carbon nanotubes were coated with copper(I) oxide, titanium(IV) oxide and iron(III) oxide nanoparticles, respectively, and their virus removal capability was tested in both batch and flow experiments. Considering the possible pH range of drinking water, the filtration tests were carried out at pH 5.0, 7.5 and 9.0 as well. The extent of MS2 removal strongly depended on the pH values for each composite, which can be due to electrostatic interactions between the membrane and the virus. The most efficient removal (greater than or equal to 99.99%) was obtained with the Cu 2 O-coated MWCNT membrane in the whole pH range. The fabricated nanocomposites were characterized by X-ray diffraction, specific surface area measurement, dynamic light scattering, zeta potential measurement, Raman spectroscopy, transmission electron microscopy and scanning electron microscopy. This study presents a simple route to design novel and effective nanocomposite-based hybrid membranes for virus removal., Competing Interests: The authors declare no competing interests.

Despite recent efforts in modernization of water treatment facilities, the problem of access to healthy drinking water for hundreds of millions of people has still not been solved. A water filter based on Cu-coated nanofibrillated cellulose with controlled porosity was prepared by the "paper-making" method. We have optimized the proper mass and ratio of functionalized and pure nanofibrillated cellulose for the preparation of the filter. MS2 bacteriophages were used to model human pathogenic virions. We tested our filter material in batch experiments and the fixed filters in flow experiments. The fabricated Cu-coated nanofibrillated cellulose filters were characterized by scanning electron microscopy, X-ray diffraction, specific surface area measurement (Brunauer-Emmett-Teller), dynamic light scattering, and inductively coupled plasma mass spectroscopy. Our measurements proved that the fixation of cellulose nanofibers plays a significant role in the degree of virus retention and it greatly enhances the efficiency of the filtration. By using these functionalized water filters, we were able to achieve a virus retention of at least 5 magnitudes (5Log) at three different pH values: 5.0, 7.5, and 9., Competing Interests: The authors declare no competing financial interest.