Search

Groundwater resources from the volcanic aquifers of northern Latium (central Italy) are widely used to supply local water needs and are mainly captured through wells. Nevertheless, despite the detailed hydrogeological knowledge of these aquifers, not enough information is available on the long-term pumping yield necessary to define the sustainable yield of a well. In this study, data from about 230 pumping tests (mainly step-drawdown and a few constant-flow-rate tests) performed in the volcanic aquifers of the Latium region were analyzed. Specifically, the aquifer formations intercepted by the wells are the fall and flow pyroclastic deposits of the Vico, Vulsini, and Sabatini volcanic districts; lava from the Vico, Cimino, and Vulsini volcanic districts; and Ignimbrite Cimina, one of the main pyroclastic products of the Cimino eruptions. These aquifers were grouped and analyzed by considering the type of permeability, hydrostratigraphic succession, and frequency and thickness of the aquifer horizons intercepted by wells. The results obtained in terms of specific capacity and transmissivity values are comparable among the identified different aquifer formations, showing a good correlation between the two parameters, a strong hydraulic heterogeneity (variability within five orders of magnitude), and variable responses regarding drawdown to pumping. This study highlights that the analysis of drawdown over time at a constant flow is fundamental in heterogeneous hydrogeological environments such as volcanic ones, where the trend in drawdown is often affected by the reduced spatial continuity of the most productive aquifer formations. Knowledge of the trend in drawdown over time, the thickness of the aquifer intercepted by the well, and the operating time of the well is an essential element in defining the sustainable yield of a well. [ABSTRACT FROM AUTHOR]

Carbonate and karst aquifers are of great importance for human water supplies, for supporting aquatic habitats and providing ecosystem services. Optimizing the groundwater withdrawals is therefore essential for obtaining the maximum flow rate for human purposes while minimizing the negative effects on the environment. In particular, when the abstraction of groundwater occurs through wells, the problem of defining the sustainable yield arises. This study analyzes pumping tests conducted in carbonate and karst aquifers in southern Italy to derive indications for defining the sustainable yield of yields. The four examined cases concern the Mesozoic–Cenozoic platform and transition pelagic carbonate rocks characterized by different degree of fracturing and karstification and hosting a carbonate aquifer with variable average groundwater yields. The analysis compared drawdown–time trends and their derivatives for 35 pumping tests with theoretical curves to identify the flow dimension. Parameters useful for examining the well yields were then determined. The results show that the response to the pumping of the investigated aquifers is very variable, both among the different sites and within the same site. Well yields are very different due to aquifer heterogeneity, local hydrostratigraphy and structural setting, and position of the pumping center within the groundwater flow system. To determine the operational pumping rate for a well in this environment, this study emphasizes the importance of analyzing drawdown trends over time to correctly predict the well's long-term response to pumping. Specifically, when pumping induces a steady-state drawdown response, the focus for defining the sustainable abstraction shifts to the basin or aquifer scale. Conversely, when a transient drawdown response to pumping results, the well's capacity to capture groundwater becomes the primary factor for well yield and its sustainability. [ABSTRACT FROM AUTHOR]

Groundwater sustainability is still an open question. Theoretical and practical approaches to the definition of groundwater sustainability were mainly developed on large scales, while few studies are available for its definition at a single well scale, especially in fractured aquifers. This study examines how much the sustainable yield of a well in fractured aquifers depends on the trend of drawdown over time. For this aim, pumping tests conducted in fractured rocks were considered and analytical models were applied to examine the long-term response of groundwater levels in some wells. To define the operational pumping flow of a well in these aquifers, results show that long constant flow rate pumping tests are preferred to step-drawdown tests. The late drawdown–time curve and residual drawdown segment-curves during the recovery, approximated by power, exponential or polynomial equations, represent the first step to extrapolating the long-term drawdown in the well. This prediction combined with the assessment of a drawdown limit in the well (as a function of the saturated thickness of the aquifer) are essential to plan the first operation of the well (flow rate and time of pumping). Subsequently, through the monitoring of this first operation step, the following operation phases can be updated and improved. [ABSTRACT FROM AUTHOR]

A multitude of geochemical processes control the aqueous concentration and transport properties of trace metal contaminants such as arsenic (As) in groundwater environments. Effective As remediation, especially under reducing conditions, has remained a significant challenge. Fe(II) nitrate treatments are a promising option for As immobilization but require optimization to be most effective. Here, we develop a process-based numerical modeling framework to provide an in-depth understanding of the geochemical mechanisms controlling the response of As-contaminated sediments to Fe(II) nitrate treatment. The analyzed data sets included time series from two batch experiments (control vs treatment) and effluent concentrations from a flow-through column experiment. The reaction network incorporates a mixture of homogeneous and heterogeneous reactions affecting Fe redox chemistry. Modeling revealed that the precipitation of the Fe treatment caused a rapid pH decline, which then triggered multiple heterogeneous buffering processes. The model quantifies key processes for effective remediation, including the transfer of aqueous As to adsorbed As and the transformation of Fe minerals, which act as sorption hosts, from amorphous to more stable phases. The developed model provides the basis for predictions of the remedial benefits of Fe(II) nitrate treatments under varying geochemical and hydrogeological conditions, particularly in high-As coastal environments., Competing Interests: Notes The authors declare no competing financial interest.