Search

After the outbreak from Wuhan City of China, COVID-19, caused by SARS-CoV-2, has become a pandemic worldwide in a very short span of time. The high transmission rate and pathogenicity of this virus have made COVID-19 a major public health concern globally. Basically, the emergence of SARS-CoV-2 is the third introduction of a highly infectious human epidemic coronavirus in the twenty-first century. Various research groups have claimed bats to be the natural host of SARS-CoV-2. However, the intermediate host and mode of transmission from bat to humans are not revealed yet. The COVID-19 cost hundreds and thousands of lives and millions are facing the consequences. The objective of this chapter was to analyze the outbreak of COVID-19 and problems faced globally.All published relevant literature from scientific sources and reputed news channels are considered to write the current review.Generally, elder persons and more particularly people with underlying medical conditions are found to be highly vulnerable to severe infection and prone to fatal outcomes. Unfortunately, there is no specific treatment with clinically approved drugs or vaccines to treat this disease. Several research groups have been investigating the efficacies of several antiviral and repurposed drugs. Currently, most of the SARS-COV-2 vaccines are at the preclinical or clinical stage of development. The latest research progress on the epidemiology, clinical characteristics, pathogenesis, diagnosis, and current status of therapeutic intervention indicates that still a specific drug or vaccine needs to come up for the effective treatment of the pandemic COVID-19. It is observed that various aspects of social life, economic status, and healthcare systems are majorly affected by this pandemic.It is concluded that the outbreak of COVID-19 has severely affected each and every field, such as social, scientific, industrial, transport, and medical sectors. Irrespective of tremendous efforts globally, few vaccines are now available for the prevention of the disease. Specific drug is not available publicly for the treatment of COVID-19. Prevention of air pollution that can aggravate COVID-19 has been suggested. Therefore, as of now, social distancing and sanitization practices are the only options available for the prevention of the disease for many.

Biohybrid micro/nanobots have emerged as an innovative resource to be employed in the biomedical field due to their biocompatible and biodegradable properties. These are tiny nanomaterial-based integrated structures engineered in a way that they can move autonomously and perform the programmed tasks efficiently even at hard-to-reach organ/tissues/cellular sites. The biohybrid micro/nanobots can either be cell/bacterial/enzyme-based or may mimic the properties of an active molecule. It holds the potential to change the landscape in various areas of biomedical including early diagnosis of disease, therapeutics, imaging, or precision surgery. The propulsion mechanism of the biohybrid micro/nanobots can be both fuel-based and fuel-free, but the most effective and easiest way to propel these micro/nanobots is via enzymes. Micro/nanobots possess the feature to adsorb/functionalize chemicals or drugs at their surfaces thus offering the scope of delivering drugs at the targeted locations. They also have shown immense potential in intracellular sensing of biomolecules and molecular events. Moreover, with recent progress in the material development and processing is required for enhanced activity and robustness the fabrication is done via various advanced techniques to avoid self-degradation and cause cellular toxicity during autonomous movement in biological medium. In this review, various approaches of design, architecture, and performance of such micro/nanobots have been illustrated along with their potential applications in controlled cargo release, therapeutics, intracellular sensing, and bioimaging. Furthermore, it is also foregrounding their advancement offering an insight into their future scopes, opportunities, and challenges involved in advanced biomedical applications.

Contamination of all segments of environment, that is, water, air, and soil, by various kinds of noxious pollutants has become a global concern because of the destructive effects of pollutants on living beings and the environment. Advancement in science, uncontrolled population growth, rapid industrialization, modern agricultural practices, and increased urbanization over the last few decades has accelerated the problem of environmental pollution manifold. A variety of hazardous pollutants inducing toxic azo dyes, phenols, polycyclic aromatic hydrocarbons, resins, chlorinated biphenyls, pharmaceuticals, heavy metals, acids/alkalis, etc., are being released into the aquatic bodies which have severely deteriorated the aquatic as well as soil ecosystem. The bioremediation technique has been effectively applied for the scavenging of environmental pollutants from soil and water. The different methodologies used in bioremediation process are cost-effective and ecologically sound. The present chapter focuses on the different methods of bioremediation applied for the decontamination of various pollutants. Different techniques of bioremediation have been thoroughly discussed. Various literature regarding the successful attempts for the remediation of organic, inorganic, and heavy metal pollutants has been described in brief.

Autonomously propelled micro/nanobots are one of the most advanced and integrated structures which have been fascinated researchers owing to its exceptional property that enables them to be carried out user-defined tasks more precisely even on an atomic scale. The unique architecture and engineering aspects of these manmade tiny devices make them viable options for widespread biomedical applications. Moreover, recent development in this line of interest demonstrated that micro/nanobots would be very promising for the water treatment as these can efficiently absorb or degrade the toxic chemicals from the polluted water based on their tunable surface chemistry. These auto propelled micro/nanobots catalytically degrade toxic pollutants into non-hazardous compounds more rapidly and effectively. Thus, for the last few decades, nanobots mediated water treatment gaining huge popularity due to its ease of operation and scope of guided motion that could be monitored by various external fields and stimuli. Also, these are economical, energy-saving, and suitable for large scale water treatment, particularly required for industrial effluents. However, the efficacy of these bots hugely relies on its design, characteristic of materials, properties of the medium, types of fuel, and surface functional groups. Minute variation for one of these things may lead to a change in its performance and hinders its dynamics of propulsion. It is deemed that nanobots might be a smart choice for using these as the new generation devices for treating industrial effluents before discharging it in the water bodies, which is a major concern for human health and the environment.

Nearly 80% of human chronic infections are caused due to bacterial biofilm formation. This is the most leading cause for failure of medical implants resulting in high morbidity and mortality. In addition, biofilms are also known to cause serious problems in food industry. Biofilm impart enhanced antibiotic resistance and become recalcitrant to host immune responses leading to persistent and recurrent infections. It makes the clinical treatment for biofilm infections very difficult. Reduced penetration of antibiotic molecules through EPS, mutation of the target site, accumulation of antibiotic degrading enzymes, enhanced expression of efflux pump genes are the probable causes for antibiotics resistance. Accordingly, strategies like administration of topical antibiotics and combined therapy of antibiotics with antimicrobial peptides are considered for alternate options to overcome the antibiotics resistance. A number of other remediation strategies for both biofilm inhibition and dispersion of established biofilm have been developed. The metallic nanoparticles (NPs) and their oxides have recently gained a tremendous thrust as antibiofilm therapy for their unique features. This present comprehensive review gives the understanding of antibiotic resistance mechanisms of biofilm and provides an overview of various currently available biofilm remediation strategies, focusing primarily on the applications of metallic NPs and their oxides.

Biodegradable precursors for micro/nanobots development are key requirements for several sustainable applications. In this regard, we propose an innovative solution for water purification at minimum cost and efforts where organic waste is used for the treatment of organic pollutants. Herein, catalytic magnetic microbots were developed by functionalizing iron oxide nanoparticles with carbon dots (C-Dots), which were synthesized by using household waste such as potato peels as precursors. The speed of these autonomously propelling bots indeed is found very promising for large distance swimming even in viscous medium by using hydrogen peroxide as fuel. These microbots catalytically propel and degrade toxic polar as well as sparingly water-soluble industrial dyes without any external agitation. The degradation of dyes was confirmed by mass-spectra analysis. Furthermore, these microbots can efficiently degrade a mixture of dyes and reused without compromising its performance significantly. Additionally, rate constant (K) and activation energy (Ea) were also determined to establish the catalytic nature of the bots. The present microbots acted as nanozyme owing to its synergistic catalytic activity of Fe3O4 and C-Dots for degradation of mixture of toxic dyes, essential for large scale water treatment.

Microwave mediated synthesis of catalytic fluorescent carbon dots (Cdots) has been reported using biodegradable starch as precursor. The as-synthesized Cdots were then characterized using various techniques such as fluorescence spectroscopy, fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS) analysis. Interestingly, Cdots showed high catalytic activity in the photo-reduction of Ag+ to silver nanoparticles (Ag NPs). During the photo-reduction process, no additional surface passivating agents was needed to stabilize the Ag NPs. Further, TEM results indicated the formation of Cdot-Ag NP nanocomposite i.e. Ag NPs surrounded with Cdots, and the emission intensity of Cdots was significantly decreased whereas the lifetime of Cdots remained almost unaltered in the presence of Ag NPs following static quenching. Finally, combination therapy of Cdots and Ag NPs using Cdot-Ag NP nanocomposite was performed which indicated synergistic bactericidal activity against antibiotic resistant recombinant E. coli bacteria. The treatment elevated the reactive oxygen species (ROS) level as compared to its individual components. Additionally, the flow cytometer study demonstrated that combination therapy causing bacterial cell wall perforation that was possibly leading to synergistic bactericidal activity against both Gram positive and Gram negative bacteria. The presence of Cdots on the surface of the Ag NPs due to their ground state complexation, possibly facilitated electrons towards Ag NPs which enhanced the ROS production in comparison to only Ag NPs.

Solid freeform techniques are revolutionising technology with great potential to fabricate highly organized biodegradable scaffolds for damaged tissues and organs. Scaffolds fabricated via Solid freeform (SFF) techniques have more pronounced effect in bone tissue engineering. SFF techniques produce various types of scaffolds from different biomaterials with specific pore size, geometries, orientation, interconnectivity and anatomical shapes. Scaffolds needs to be designed from such biomaterials which can attach directly to natural tissues and mimic its properties, so ideally mechanical properties of scaffolds should be same as that of regenerating tissues for best results. The scaffolds designed without optimized mechanical properties would lead to the reduced nutrition diffusion within tissue engineered constructs (TECs) causing tissue necrosis. These scaffolds are mainly processed from ceramics and polymers like calcium phosphate, polydioxane, €-polycaprolactone, polylactic and polyglycolic acids etc. While, hydrogel scaffolds provide bridge for encapsulated cells and tissues to integrate with natural ECM. Likewise, 2D images from radiography were not sufficient for the prediction of the brain structure, cranial nerves, vessel and architecture of base of the skull and bones, which became possible using the 3D prototyping technologies. Any misrepresentation can lead to fatal outcomes. Biomodelling from these techniques for spinal surgery and preoperative planning are making its way toward successful treatment of several spinal deformities and spinal tumor. In this review we explored laser based and printing SFF techniques following its methodologies, principles and most recent areas of application with its achievements and possible challenges faced during its applications.