Search

Nonisocyanate polyurethane (NIPU) thermoset networks were produced from a novel soybean-oil-derived poly(vinyl ether) (i.e., poly[(2-vinyoxy)ethyl soyate]) possessing cyclic carbonate functional groups in the fatty acid ester side chains of the polymer. Three different linear aliphatic diamines, namely, 1,6-hexamethylenediamine, 1,9-nonanediamine, and 1,13-tridecanediamine, were used to cross-link the cyclic carbonate-functional poly[(2-vinyoxy)ethyl soyate] [C-poly(2-VOES)]. All three of these diamines can be readily obtained from renewable resources. For comparison purposes, analogous NIPU networks were produced using cyclic carbonate-functional soybean oil (CSBO) in place of the C-poly(2-VOES). The chemical, thermal, viscoelastic, and mechanical properties of the six NIPU networks were characterized. With regard to the chemical nature of the soy-based, carbonate-functional component, it was found that the polymeric nature of C-poly(2-VOES) resulted in very different NIPU properties compared to analogou...

Novel, partially bio-based poly(vinyl ether) copolymers derived from soybean oil and cyclohexyl vinyl ether (CHVE) were produced by cationic polymerization and investigated for application as alkyd-type surface coatings. Three different polymers were produced and cured clear coatings and free films characterized as a function of CHVE comonomer content and curing conditions. CHVE comonomer content was varied at 0, 25, and 50 wt%, and the three different curing conditions were 1 week at room temperature, 120°C for 1 h, and 150°C for 1 h. The results of the study showed that the thermal, mechanical, and physical properties of the coatings produced from these novel polymers varied considerably as a function of polymer composition and cure temperature. Overall, the results suggest a good potential for these novel copolymers to be used for coatings cured by autoxidation. Compared to conventional alkyd resins, which are produced by high temperature melt condensation polymerization, these poly(vinyl ether)s provide several advantages. These advantages include milder, more energy efficient polymer synthesis, elimination of issues associated with gelation during polymer synthesis, production of polymers with well-defined composition and relatively narrow molecular weight distribution, and elimination of film formation and physical property issues associated with entrained monomers, dimers, trimers, etc.

The tridentate dithiocarbazate-based Schiff base ligands H2L (S-methyl-3-((5-X-2-hydroxyphenyl)methyl)dithiocarbazate, X = H, L = L1; X = NO2, L = L2) react with [VIVO(acac)2] in acetonitrile solution under refluxing condition in the presence of an organic base or ammonium ion (added in moderate excess) as co-ligand to generate cis-dioxidovanadium(V) complexes viz. (NH4)[VVO2L2(H2O)] 1, (gunH)[VVO2L1] 2, (gunH)[VVO2L2] 3 and (cytH)[VVO2L1](cyt) 4 (gun = guanidine and cyt = cytosine). These compounds have oligomeric structures in the solid state as confirmed by X-ray crystallographic investigation, involving an alternating array of anionic [LVO2]− species and the BH+ counterion held together by Coulombic interactions and strong hydrogen bonding. These compounds are stable in methanol solution. In aprotic solvents of higher donor numbers, viz. CH3CN, DMF, or DMSO, these compounds undergo photo-induced transformation when exposed to visible light. The product obtained appears to be a μ-oxidodivanadium(IV/V) mixed-oxidation compound (BH)[LOVV-(μ-O)-VIVOL] as established by EPR, electronic spectroscopy in the NIR region, and dynamic 1H NMR spectroscopic studies.

A plant oil‐based polymer technology was recently developed that enables high molecular weight polyvinylether polymers to be produced using cationic polymerization. The plant oil monomer synthesis involves simple base‐catalyzed transesterification of a plant oil triglyceride with a hydroxy‐functional vinyl, ether such as 4‐(vinyloxy)butanol or 2‐(vinyloxy)ethanol, to produce a mixture of vinyl ether monomers that possess fatty acid ester groups in their structure. A key aspect of the technology involves the polymerization process that allows for high molecular weight polymers to be produced by polymerization exclusively through the vinyl ether double bonds. This feature enables polymers to be produced that possess unsaturation in the fatty acid ester pendent groups derived from the plant oil starting material. As has been done for conventional plant oil triglycerides, the double bonds can be used to produce thermoset materials either directly through an oxidative process or by derivatization to produceotherfunctional groups,suchasepoxides,acrylates,andhydroxylsthatcanbesubsequentlyused toproduce crosslinkednetworks.Thepolymerizationprocessalsoresultsina “living”polymerizationthat allows for control of polymer molecular weight, narrow molecular weight distributions, and the production of unique polymer architectures such as block copolymers. Another very important feature of the technology involves the ability to copolymerize the plant oil‐based vinyl ether monomers with other monomers to tailor polymer properties such as glass transition temperature, mechanical properties, and solubility/compatibility with other materials. This document provides an overview of the present state of the technology using soybean oil as a representative plant oil source.

Nylon 13,T was successfully synthesized, and its chemical composition, thermal properties, crystal structure and moisture absorption were characterized. Melting temperature and glass transition temperature were deter-mined to be 263 and 90°C, respectively, while the equilibrium melting temperature was determined to be 289°C. Characterization of the crystallization kinetics showed that nylon 13,T exhibits very fast crystallization compared with the industrially important nylons, nylon 6 and nylon 6,6. In addition, the moisture absorption of nylon 13,T was dramatically lower than nylon 6 and nylon 6,6, which is consistent with the much lower amide content of nylon 13,T. The crystal structure was determined to be pseudohexagonal.

Nylon 13,6 was successfully synthesized and its chemical composition, thermal properties, crystal structure, and moisture absorption characterized. Melting temperature and glass transition temperature were determined to be 206 °C and 60 °C, respectively, while the equilibrium melting temperature was determined to be 248 °C. Characterization of the crystallization kinetics showed that nylon 13,6 exhibits very fast crystallization compared to the industrially important nylons, nylon 6 and nylon 6,6. In addition, the moisture absorption of nylon 13,6 was dramatically lower than nylon 6 and nylon 6,6 which is consistent with the much lower amide content of nylon 13,6. The crystal structure was determined to be different from the expected γ-form, which possess a pseudohexagonal unit cell. Instead, the x-ray scattering pattern was more similar to the α-form. A similar result has been obtained for other odd–even nylons including nylon 5,6, nylon 5,10, nylon 9,2, nylon 11,10, and nylon 11,12.

Prior to the ample supply of low cost petrochemicals, plant oils were used extensively as binders for paints and coatings. The utility of plant oil triglycerides as coating binders stems from the unsaturated fatty acid esters that provide a means to crosslink the liquid plant oil into an insoluble film by simply exposing the thin film of oil to the atmosphere. The crosslinking mechanism is a complex free-radical process, referred to as autoxidation, and involves abstraction of bis-allylic hydrogen atoms by singlet oxygen present in the atmosphere [1-4]. Since the concentration of bis-allylic hydrogens is critical to the autoxidation process, only plant oils with relatively high levels of linoleic and linolenic fatty acid esters are useful, such as linseed, tung, poppy seed and walnut oil. Plant oils such as these are referred to as ‘drying oils.’ Soybean oil (SBO), which is the plant oil currently produced in the highest volume in North America, is referred to as ‘semidrying’ since it is capable of autoxidising to a cured film, but the time required to do so is too long to be useful for paints and coatings. Corresponding author: Dr Bret J. Chisholm NDSU Center for Nanoscale Science and Engineering bret.chisholm@ndsu.edu An alternative to alkyds

A series of poly(1,9-nonamethylene adipamide-co-1,9-nonamethylene terephthalamide) copolymers were produced using melt polymerization and the thermal properties, crystal structure, and moisture uptake characterized. The results confirmed that the copolymers exhibit isomorphism. As expected, glass transition temperature and the apparent melting temperature increased with increasing terephthalmide content. Using the difference in the apparent melting temperature to the crystallization temperature as a measure of relative crystallization rate, it was observed that crystallization rate decreased as the terephthalamide content of the copolymer was increased from 0 to 50 mole % but then sharply increased when increased beyond 50 mole %. This behavior may be the result of extensive inter- and intramolecular interactions in the melt associated with terephthalmide units in the polymer chain that nucleate crystallization upon cooling below the equilibrium melting temperature. Comparing the thermal properties of cop...

Antimicrobial copolymers of hydrophobic N-alkyl and benzophenone containing polyethylenimines were synthesized from commercially available linear poly(2-ethyl-2-oxazoline), and covalently attached to surfaces of synthetic polymers, cotton, and modified silicon oxide using mild photo-cross-linking. Specifically, these polymers were applied to polypropylene, poly(vinyl chloride), polyethylene, cotton, and alkyl-coated oxide surfaces using solution casting or spray coating and then covalently cross-linked rendering permanent, nonleaching antimicrobial surfaces. The photochemical grafting of pendant benzophenones allows immobilization to any surface that contains a C–H bond. Incubating the modified materials with either Staphylococcus aureus or Escherichia coli demonstrated that the modified surfaces had substantial antimicrobial capacity against both Gram-positive and Gram-negative bacteria (>98% microbial death).

The anionic cis-dioxovanadium (V) complex species LVO 2 - of tridentate biprotic dithiocarbazate-based ligands H2L (S-methyl-3-((5-R-2-hydroxyphenyl)methyl)dithiocabazate, R = H, L = L1; and R = Br, L = L2) can bind alkali metal ions. The products [LVO2M(H2O)n] (M = Na+, L = L1,1; L = L2, 2 and M = K+, L = L1,3) have extended chain structures in the solid state, stabilized by strong hydrogen bonding and Coulombic interactions as revealed from X-ray crystallography. The LVO 2 - moieties here behave like analogues of carboxylate groups and display interesting variations in their binding patterns. It appears thatl is a single stranded helicate with LVO 2 - units forming the strands which surround the labile sodium ions occupying positions on the axis. The compounds are stable in water and methanol as solvents, while in aprotic solvents of higher donor strengths, viz. CH3CN, DMF and DMSO, they undergo photo-induced reduction when exposed to visible light, yielding green solutions from their initial yellow colour. The putative product is a mixed-oxidation (μ-oxo)divanadium (IV/V) species as revealed from EPR, electronic spectroscopy, dynamic1H NMR, and redox studies.

We report the preparation and solid state characterization of a silicon (IV) salt based on a new redox active tripodal hexadentate ligand [H3L = l,l,l-Tris(l′-oxophenalenyl-9′-N-methyl) ethane]. X-ray analysis of the complex reveals a short Si-N bond distance (av 1.878(16)). The compound is shown to undergo three reversible one-electron reduction steps (without decomposition) due to the formation of radical, anion and dianion of the phenalenyl moiety.

We report the preparation, crystallization, and solid-state characterization of the first members of a new family of spiro-bis-(1,9-diamino-substituted-phenalenyl)boron neutral radicals. The crystal structures show that the three radicals are monomeric and without close contacts in the crystal lattice. In all cases magnetic susceptibility measurements confirm the presence of free radicals with one unpaired spin per molecule. Two of the new radical compounds are among the most highly conducting neutral organic solids, with room-temperature conductivities reaching sigma(RT) = 4 x 10(-2) S/cm. The measured conductivities correlate with the closest intermolecular contacts in the solid state and with the calculated band dispersions, even though the bandwidths are much smaller than those found in other organic conductors.

S-Methyl 3-((2-hydroxyphenyl)methyl)dithiocarbazate (H(2)L(1)) and its bromo derivative (H(2)L(2)), which are traditionally biprotic tridentate (ONS) ligands, behave in an unprecedented manner when allowed to react with [VO(acac)(2)] under an oxidative environment in acetonitrile-water medium containing a catalytic amount of alkali metal ion. The products obtained are oxovanadium(V) compounds [VOL(L(cyclic))] (L = L(1), 1a, and L(2), 1b) that contain one molecule of ligand which undergoes metal-induced cyclization to form a thiadiazole ring. Compound 1a crystallizes in the triclinic space group P(-)1 with a = 9.1830(9) A, b = 9.4165(12) A, c = 12.700(2) A, alpha = 100.988(8)(o), beta = 100.195(7)(o), gamma = 78.774(8)(o), V = 1046.3(2) A(3), and Z = 2. With cobalt(III), however, the products [CoL(HL)].H(2)O (L = L(1), 2a, and L(2), 2b) have hydrogen-bonded dimeric structures with each ligand virtually carrying 1.5 units of negative charge as confirmed by X-ray crystal structure analysis of 2a. It also crystallizes in triclinic space group P(-)1 with a = 12.0842(8) A, b = 13.5251(9) A, c = 14.1960(10) A, alpha = 78.122(6)(o), beta = 73.888(6)(o), gamma = 78.255(6)(o), V = 2154.7(3) A(3), and Z = 4. In solution, 2a is a symmetric molecule as indicated by (1)H NMR, involving a characteristic hydrogen-bonded O-H-O broad feature in the downfield (at 14.5 ppm) connecting both monoprotonated (LH(-)) and deprotonated (L(2-)) forms of the ligand--a situation somewhat analogous to the classic H-F-H case as observed in bifluoride ion.

Reaction of [V(IV)OL(1)(Im)] (H(2)L(1) = S-methyl-3-((2-hydroxyphenyl)methyl)dithiocarbazate) with [V(V)OL(OCH(3))] allows isolation of (ImH)[L(1)OV-(mgr;-O)-VOL] complexes 2 (H(2)L = H(2)L(2) = S-methyl-3-((5-bromo-2-hydroxyphenyl)methyl)dithiocarbazate) and 3 (H(2)L = H(2)L(1)), one of which (2) has ligand asymmetry not previously known in this type of complex. In the solid state, (ImH)[L(1)OV-(mgr;-O)-VOL(2)] (2) provides an example of a divanadium(IV,V) compound with a syn angular [V(2)O(3)](3+) core structure that exhibits crystallographically imposed mirror symmetry due to static disorder. Crystals of 2 are orthorhombic, space group Pnma, with a = 10.740(2) Å, b = 18.912(4) Å, c = 17.163(4) Å, and Z = 4. In toluene at room temperature, both 2 and 3 have 8-line EPR spectra, characteristic of trapped-valence structure. When acetonitrile is added to these solutions, the spectra reveal 15-line features with asymmetric distortions that smooth out with the lowering of temperature. This probably has its origin in a solvent-dependent equilibrium involving two magnetically inequivalent structural forms of the divanadium(IV,V) compound, with syn angular and anti linear structures of the [V(2)O(3)](3+) core. Variable temperatures (298-220 K) (51)V NMR spectroscopic studies in solution also support this view. In acetonitrile, both 2 and 3 exhibit an intervalence transfer band in the near-IR region at ca. 970 nm (epsilon, 1600 and 1480 M(-)(1) cm(-)(1) for 2 and 3, respectively) and they undergo one-electron reversible oxidation at ca. 0.40 V (vs SCE) due to the V(IV)V(V)/V(V)V(V) couple.

In this article, we describe the synthesis and characterization of a series of spiropyran containing copolymers that were used as colorimetric sensors for a series of divalent metal ions. The composition of spiropyran contained in the polymer backbone was varied from 10-100 mol % to investigate the influence of free volume and sterics on the photochromic response. Fourier transform-infrared (FT-IR) spectroscopy was used to characterize the photoinduced conversion, as well as the merocyanine-metal ion (MC-M(2+)) interaction. FT-IR spectra were analyzed using chemometric methods to elucidate the chemical binding environment between MC and M(2+) and to selectively identify different metal ions bound to MC. By means of UV-vis absorption spectroscopy, we also demonstrate that each metal ion gives rise to a unique colorimetric response that is dependent on the amount of spiropyran comonomer contained in the polymer backbone and that by increasing the concentration of chromophore in the copolymer, the selectivity between different metal ions decreases. With the use of chemometric methods, UV-vis spectra can be analyzed to quantitatively identify metal ions in a concentration range from 1 microM to 100 mM.

In this article, we described a method for the formation of photochromic polymer brushes grafted from oxide surfaces using surface-initiated ring-opening metathesis polymerization of spiropyran-based monomers in the presence of second generation Grubbs catalyst. The growth of the polymer film, as monitored by ellipsometry and atomic force microscopy (AFM), is strongly influenced by the initial concentrations of the catalyst and monomer, as well as reaction time. These densely packed and highly smooth polymer films were successfully used as surfaces with switchable color and wettability using light as the external stimulus. The relatively nonpolar spiropyran can be switched to a polar, zwitterionic merocyanine isomer (with a larger dipole moment) using light of the appropriate wavelength. This process is reversible and can be switched back using visible light. The spiropyran-merocyanine photoinduced isomerization gives a reversible contact angle change up to 15 degrees for smooth Si/SiO 2 substrate under sequential irradiation cycles with UV and visible light. This contact angle change can be amplified by complexing the merocyanine form with metal ions through the phenolate oxygen, which enhances the switching of wettability with these polymer brushes. Irradiation in the presence of cobalt(II) ions gives rise to a contact angle variation as high as 35 degrees . This is the largest change in photoinduced surface wettability observed for a flat substrate. Photoisomerization in spiropyrans also yields a change in the refractive index of the film, which we have investigated using ellipsometric imaging. Lastly, morphological changes accompanying photochromism were investigated using atomic force microscopy. Significant morphological changes can only be induced in the films by irradiating in polar solvents that help to stabilize the merocyanine ring open form.

We report the preparation, crystallization, and solid-state characterization of the first two members of a new family of spiro-bis(1,9-disubstituted phenalenyl)boron neutral radicals based solely on oxygen functionalization, and we show that this strategy significantly lowers the electrochemical disproportionation potentials (DeltaE), in comparison with other spiro-bis(1,9-disubstituted phenalenyl)boron salts. In the solid state, these radicals pack in a continuous array of pi-pi-stacked phenalenyl units with very short intermolecular carbon...carbon contacts. These two radicals are among the most highly conducting neutral organic solids, with room temperature conductivities reaching 0.3 S/cm. Magnetic susceptibility measurements show that the radicals do not exist as isolated free radicals, and there is significant spin-spin interaction between the molecules in the solid state as expected from the crystal structures and the calculated band structures; the solid-state properties are best rationalized in terms of the resonating valence bond model.

Nickel(II) complexes of three new heterodonor ligands (HL(1), H(2)L(2), and H(3)L(3)) based on 2-aminocyclopent-1-ene-1-dithiocarboxylate have been synthesized, and their crystallographic characterizations are reported. With the pentacoordinating ligands HL(1) and H(3)L(3), the products obtained (1 and 2) are both mononuclear square planar compounds in which one of the pyrazolyl arms of ligand HL(1) and the bridgehead alkoxy oxygen of H(3)L(3) are staying away from coordination in 1 and 2, respectively. The saturated three carbon alkanyl chain in the ligand H(3)L(3) provides enough flexibility to generate tetrahedral distortion (dihedral angle, 22.7 degrees ) in the planarity of 2. Compound 1 displays paramagnetic line-broadening in its (1)H NMR spectrum due to oligomerization in solution. With the unsymmetrical binucleating ligand H(2)L(2), two mixed-spin homodinuclear complexes (3 and 4) have been synthesized using pyrazole and 2-mercaptopyridine as ancillary mu(2)-bridging ligands. Both these complexes have square planar low-spin and spin-triplet nickel(II) centers which display both coordination number and donor set asymmetry in tandem. The compounds have been characterized by (1)H NMR, electronic spectroscopy, and electrochemical studies.

Syntheses of alkali metal adducts [LVO(2)M(H(2)O)(n)] (1-7) (M = Na(+), K(+), Rb(+), and Cs(+); L = L(1)(-)L(3)) of anionic cis-dioxovanadium(V) species (LVO(2)(-)) of tridentate dithiocarbazate-based Schiff base ligands H(2)L (S-methyl-3-((5-(R-2-hydroxyphenyl))methyl)dithiocarbazate, R = H, L = L(1); R = NO(2), L = L(2); R = Br, L = L(3)) have been reported. The LVO(2)(-) moieties here behave like an analogue of carboxylate group and have displayed interesting variations in their binding pattern with the change in size of the alkali metal ions as revealed in the solid state from the X-ray crystallographic analysis of 1, 3, 6, and 7. The compounds have extended chain structures, forming ion channels, and are stabilized by strong Coulombic and hydrogen-bonded interactions. The number of coordinated water molecules in [LVO(2)M(H(2)O)(n)] decreases as the charge density on the alkali metal ion decreases (n = 3.5 for Na(+) and 1 for K(+) and Rb(+), while, for Cs(+), no coordinated water molecule is present). In solution, compounds 1-7 are stable in water and methanol, while in aprotic solvents of higher donor strengths, viz. CH(3)CN, DMF and DMSO, they undergo photoinduced reduction when exposed to visible light, yielding green solutions from their initial yellow color. The putative product is a mixed-oxidation (mu-oxo)divanadium(IV/V) species as revealed from EPR, electronic spectroscopy, dynamic (1)H NMR, and redox studies.

The anionic cis-dioxovanadium(V) complex species LVO(2)(-) of a tridentate ONS ligand (H(2)L) can bind sodium ion in a bis-monodentate fashion like a bridging carboxylate group. The product [LVO(2)Na(H(2)O)(2)](infinity) (1) is a water soluble polymeric compound in which the complementary units are held together by the simultaneous use of hydrogen bonding and Coulombic interactions. Crystallographic characterization reveals that 1 is a single stranded helicate with LVO(2)(-) units forming the strand which surrounds the labile sodium ions that occupy the positions on the axis. In solution of protic solvents, viz. water and methanol, 1 is quite stable as indicated by electrical conductivity and (1)H NMR measurements. In aprotic solvents, viz. CH(3)CN, DMF, or DMSO, however, the extended hydrogen bonded network in 1 breaks apart and the helical structure collapses when irradiated with visible light. The product is a mixed-oxidation vanadium(IV/V) species obtained by photoinduced reduction as confirmed by EPR, time dependent (1)H NMR, and electronic spectroscopy. Compound 1 is a rare example of a nonnatural helix where hydrogen bonding interactions play a crucial role in stabilizing the single stranded polymeric structure such as that frequently observed in the biological world.

Vanadium(IV) and -(III) complexes of a tetradentate N(2)OS Schiff base ligand H(2)L [derived from methyl 2-((beta-aminoethyl)amino)cyclopent-1-ene-1-dithiocarboxylate and salicylaldehyde] are reported. In all the complexes, the ligand acts in a bidentate (N,O) fashion leaving a part containing the N,S donor set uncoordinated. The oxovanadium(IV) complex [VO(HL)(2)] (1) is obtained by the reaction between [VO(acac)(2)] and H(2)L. In the solid state, compound 1 has two conformational isomers 1a and 1b; both have been characterized by X-ray crystallography. Compound 1a has the syn conformation that enforces the donor atoms around the metal center to adopt a distorted tbp structure (tau = 0.55). Isomer 1b on the other hand has an anti conformation with almost a regular square pyramidal geometry (tau = 0.06) around vanadium. In solution, however, 1 prefers to be in the square pyramidal form. A second variety of vanadyl complex [VO(L(cyclic))(2)](I(3))(2) (2) with a new bidentate O,N donor ligand involving isothiazolium moiety has been obtained by a ligand-based oxidation of the precursor complex 1 with iodine. Preliminary X-ray and FAB mass spectroscopic data of 2 have supported the formation of a heterocyclic moiety by a ring closure reaction involving a N-S bond. Vanadium(III) complex [V(acac)(HL)(2)] (3) has been obtained through partial ligand displacement of [V(acac)(3)] with H(2)L. Compound 3 has almost a regular octahedral structure completed by two bidentate HL ligands along with an acetylacetonate molecule. Electronic spectra, magnetism, EPR, and redox properties of these compounds are reported.

Novel bio-based poly(vinyl ether) copolymers derived from soybean oil and menthol were produced by cationic polymerization and investigated for application as alkyd-type surface coatings. Compared to conventional alkyd resins, which are produced by high temperature melt condensation polymerization, the bio-based poly(vinyl ether)s were thought to provide several advantages. These advantages include milder, more energy efficient polymer synthesis, elimination of issues associated with gelation during polymer synthesis, production of polymers with well-defined composition and relatively narrow molecular weight distribution, and elimination of film formation and physical property issues associated with entrained monomers, dimers, trimers, etc. As expected, incorporation of the tri-substituted cycloaliphatic groups derived from menthol pendent to the poly(vinyl ether) polymer backbone significantly increased the glass transition temperature and mechanical properties of crosslinked networks produced by autoxidation. Overall, the results of the study suggest a high potential for these novel copolymers with high bio-based content to be used for alkyd-type coatings.

Negative differential resistance (NDR) behaviors of single molecule junctions composed of a thiol-terminated Ru(ii) bis-terpyridine (Ru(tpy-SH)2) molecule sandwiched between two gold electrodes are measured using a specifically modified scanning probe microscope break junction technique (SPMBJ) at room temperature. The low-bias (0.623 ± 0.135 V) NDR observed for one of the three conductance groups is contact specific and is caused by a bias induced electrode-molecule coupling changes.