Search

Thin films consisting of platinum nanoparticles (Pt NPs) with uniform size and distribution have been successfully prepared at a liquid-liquid interface. Apart from the usual substrates like glass, Si etc. the films were also deposited on the surfaces of MoS2 thin films and graphene nanosheets (GNS) respectively, by using a layer-by-layer (LbL) deposition technique to form Pt-MoS2 and Pt-GNS composites. The loading concentration of Pt NPs on MoS2 and GNS can be adjusted by selecting the number and sequence of the component layers during LbL deposition. The Pt thin films, Pt-MoS2 and Pt-GNS nanocomposite thin films are characterized using transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). TEM results of the composites show that Pt NPs with sizes in the range of 1 to 3 nm are uniformly dispersed on the MoS2/GNS surface. The catalytic activities of Pt and Pt-composites for the reaction of methanol oxidation are studied using cyclic voltammetry and chronoamperometry. Electrochemical studies reveal that both the Pt-MoS2 and Pt-GNS nanocomposites show excellent electrocatalytic activity towards methanol oxidation. Pt-MoS2 and Pt-GNS nanocomposite electrodes show excellent stability for reuse of the catalyst. A probable mechanism of catalysis has been discussed. We propose that the similar architecture reported here would be promising for the synthesis of high performance catalysts for fuel cells, gas phase reactions, and other applications such as sensors.

Highly monodispersed nitrogen doped TiO2 nanoparticles were successfully deposited on graphene (N-TiO2/Gr) by a facile in-situ wet chemical method for the first time. N-TiO2/Gr has been further used for photocatalytic hydrogen production using a naturally occurring abundant source of energy i.e. solar light. The N-TiO2/Gr nanocomposite composition was optimized by varying the concentrations of dopant nitrogen and graphene (using various concentrations of graphene) for utmost hydrogen production. The structural, optical and morphological aspects of nanocomposites were studied using XRD, UV-DRS, Raman, XPS, FESEM, and TEM. The structural study of the nanocomposite shows existence of anatase N-TiO2. Further, the details of the components present in the composition were confirmed with Raman and XPS. The morphological study shows that very tiny, 7-10 nm sized, N-TiO2 nanoparticles are deposited on the graphene sheet. The optical study reveals a drastic change in absorption edge and consequent total absorption due to nitrogen doping and presence of graphene. Considering the extended absorption edge to the visible region, these nanocomposites were further used as a photocatalyst to transform hazardous H2S waste into eco-friendly hydrogen using solar light. The N-TiO2/Gr nanocomposite with 2% graphene exhibits enhanced photocatalytic stable hydrogen production i.e. ∼5941 μmol h(-1) under solar light irradiation using just 0.2 gm nanocomposite, which is much higher as compared to P25, undoped TiO2 and TiO2/Gr nanocomposite. The enhancement in the photocatalytic activity is attributed to 'N' doping as well as high specific surface area and charge carrier ability of graphene. The recycling of the photocatalyst shows a good stability of the nanocomposites. This work may provide new insights to design other semiconductor deposited graphene novel nanocomposites as a visible light active photocatalyst.

We reveal an easy, inexpensive, efficient one stepflame synthesis of semiconductor/metal oxide thin films at air-liquid interface, subsequently, transferred on suitable substrate. The method has been illustrated by the formation of CdS and WO3 QDs thin films. The features of the present method are (1) Growth of thin films consisting of0.5-2.0nm sized Quantum Dots (QDs)/(ultra-small nanoparticles) in a short time, at the air-liquid interface which can be suitably transferred by a well-known Blodgett technique to an appropriate substrate, (2) The method is suitable to apply layer by layer (LbL) technique to increase the film thickness as well as forming various compositions as revealed by AFM measurements. The films are characterized for their structure (SAED), morphology (TEM), optical properties (UV-Vis.) and photoluminescence (PL). Possible mechanism of formation of QDs thin film and effect of capping in case of CdS QDs is discussed., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Nearly monodisperse rhodium nanoparticles with adsorbed NH(x) were synthesized at the CCl(4)-water interface. The presence of NH(x)-adsorbed species was confirmed by energy-dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS) studies. The synthesis of controlled size 2-38 nm rhodium particles was studied as a function of reducing agent concentration by transmission electron microscopy (TEM). HRTEM confirmed the formation of rhodium nanoparticles having fringe spacing consistent with reported Rh (111) planes. The continuity of these films over an area of 1×1 μm was revealed by atomic force microscopy (AFM) studies. The electrocatalytic application of these nanostructure Rh-NH(x) thin films for formaldehyde oxidation in 0.5M NaOH was investigated by cyclic voltammetry. The Rh nanoparticles formed by the present strategy are expected to be useful for other catalytic applications also., (Copyright © 2011 Elsevier Inc. All rights reserved.)

The simple recrystallization process is innovatively used to obtain the nanoparticles of copper phthalocyanine by a simple method. Liquid-liquid interface recrystallization technique (LLIRCT) has been employed successfully to produce small sized copper phthalocyanine nanoparticles with diameter between 3-5 nm. The TEM-SAED studies revealed the formation of 3-5 nm sized with beta-phase dominated mixture of alpha and beta copper phthalocyanine nanoparticles. The XRD, SEM, and the UV-vis studies were further carried out to confirm the formation of copper phthalocyanine thin films. The cyclic voltametry (CV) studies conclude that redox reaction is totally reversible one electron transfer process. The process is attributed to Cu(II)/Cu(I) redox reaction.

The well-arrayed Pd and Au nanoparticle thin films were successfully prepared by making use of self-assembled PS-b-P4VP block copolymer (BCP) as a mask for the reduction of PdCl2 deposited on glass substrate. The films consisted of spherialcal nanoparticles with an average diameter of about 45 nm. For monitoring the size, shape and array formation of Pd nanopaticle films, this procedure was proved better to the conventional process in which PdCl2 impregnated in the channels of self assembled BCP film is reduced to form nanoparticle array. This observations of Pd nanoparticle array film formation is supported by the AFM and UV-VIS studies of Au nanoparticle array films formed by conventional method.