Search

Board of Radiation and Isotope Technology, a unit of the Department of Atomic Energy, fabricates and supplies radioactive sources for medical, industrial, agriculture and research applications. High specific activity cobalt-60, required for teletherapy is normally imported. There was a proposal for manufacturing high specific activity sources indigenously. A study was carried out to observe the feasibility of mixing imported and indigenous cobalt-60 pellets to fabricate teletherapy source capsules. The specific activity of imported pellets is more than 300 Ci/g, whereas that of indigenous pellets obtained from Indian power reactors is 140 Ci/g. The radiation output from a capsule for different combinations of specific activity was evaluated. Losses due to self-absorption were accounted in the evaluations. In another study, the optimized lengths of the capsule for an output of 200 RMM and the additional activity to be added to compensate losses due to self-absorption were also estimated for different specific activity pellets. Sources fabricated on the basis of this study showed a good agreement with the estimations. Source capsules with a combination of different specific activities are yet to be fabricated. [ABSTRACT FROM AUTHOR]

An attempt to recover and purify 4.66 TBq(126Ci) of (137)Cs as solution from a 20-year-old doubly encapsulated sealed source containing (137)CsCl was made successfully. The primary capsule was first cut open to retrieve the secondary capsule. The top end of the secondary SS capsule was then cut to render it as an open cylinder and the (137)CsCl pellet inside was dissolved in small aliquots of water. Each aliquot of the (137)CsCl solution was dispensed into glass vials, sealed, assayed and stored. Barium formed during the radioactive decay of (137)Cs was removed by carbonate precipitation. Chloride was removed by heating with HNO(3) and evaporation. About 91.8% of the total activity could be recovered and used subsequently for making brachytherapy sources.

137Cs source in solid matrix encapsulated in stainless-steel at MBq (mCi) levels are widely used as brachytherapy sources for the treatment of carcinoma of cervix uteri. This article describes the large-scale preparation of such sources. The process of fabrication includes vitrification of 137Cs-sodium borosilicate glass, its transformation into spheres of 5-6 mm diameter, casting of glass spheres into a cylinder of 1.5 mm (varphi) x 80 mm (l) in a platinum mould, cutting of the moulds into 5-mm-long pieces, silver coating on the sources, and finally, encapsulation in stainless steel capsules. Development of safety precautions used to trap 137Cs escaping during borosilicate glass preparation is also described. The leach rates of the radioactive sources prepared by the above technology were within permissible limits, and the sources could be used for encapsulation in stainless steel capsules and supplied for brachytherapy applications. This development was aimed at promoting the potential utility of 137Cs-brachytherapy sources in the country and reducing the user's reliance on imported sources. Since its development, more than 1000 such sources have been made by using 4.66 TBq(126 Ci) of 137Cs.

Board of Radiation and Isotope Technology, a unit of the Department of Atomic Energy, fabricates and supplies radioactive sources for medical, industrial, agriculture and research applications. High specific activity cobalt-60, required for teletherapy is normally imported. There was a proposal for manufacturing high specific activity sources indigenously. A study was carried out to observe the feasibility of mixing imported and indigenous cobalt-60 pellets to fabricate teletherapy source capsules. The specific activity of imported pellets is more than 300 Ci/g, whereas that of indigenous pellets obtained from Indian power reactors is 140 Ci/g. The radiation output from a capsule for different combinations of specific activity was evaluated. Losses due to self-absorption were accounted in the evaluations. In another study, the optimized lengths of the capsule for an output of 200 RMM and the additional activity to be added to compensate losses due to self-absorption were also estimated for different specific activity pellets. Sources fabricated on the basis of this study showed a good agreement with the estimations. Source capsules with a combination of different specific activities are yet to be fabricated.

The most common foreign bodies in children are coins, particularly in the age group of 2-5 years. Sharp esophageal foreign bodies in children are not commonly encountered. We present a report of two sharp foreign bodies in young children. Both of them required cervical esophagotomy for removal of the foreign body after an unsuccessful endoscopic attempt. The principles of evaluation and management of sharp and penetrating foreign bodies of the esophagus are described.