Search

In modern life conditions, when emphasis is on environmental protection and sustainable development, fuels produced from biomass are increasingly gaining in importance, and it is necessary to consider the quality of end products obtained from biomass. Based on the existing European standards, collected literature and existing laboratory methods, this paper presents results of testing individual thermal - chemical properties of biomass energy pellets after extrusion and cooling the compressed material. Analysing samples based on standard methods, data were obtained on the basis of which individual thermal-chemical properties of pellets were estimated. Comparing the obtained results with the standards and literature sources, it can be said that moisture content, ash content and calorific values are the most important parameters for quality analysis which decide on applicability and use-value of biomass energy pellets, as biofuel. This paper also shows the impact of biofuels on the quality of environmental protection. The conclusion provides a clear statement of quality of biomass energy pellets.

This study reviews test results for a biomass-fired hot water boiler with a nominal boiler thermal power of 120 kW. In the experiments, prismatic wheat straw bales were used as biomass. The impact of the quantity (220, 290, 360 and 430 m3 h−1) of inlet air fed to the boiler firebox was continuously monitored. This was to examine the influence of the quantity of inlet air and recirculation (0, 16.5 and 33%) of combustion products on the boiler thermal power and boiler energy efficiency. Thus, the following mathematical models and formulas were presented: correlation between boiler thermal power and bale residence time; bale mass loss during the combustion process; correlation between boiler energy efficiency and bale residence time. Mathematical models were obtained by using experimental data and by applying nonlinear regression analysis. Adjustment evaluation of mathematical models with experimental data was performed based on the determination coefficient, t-test and F-test. Increase the amount of air throughout the firebox produced boiler thermal power increase and bale residence time decrease. It was shown that combustion products recirculation of 16.5% partly improved boiler characteristics, while the recirculation of 33% did not, comparing with the case without recirculation.

The biomass combustion process is inevitably accompanied by the emission of pollutant gasses. This paper gives a comprehensive analysis of the external variables and combustion products of the biomass plant. The analyzed data were collected from 18 MWt boiler in combined heat and power plant Sremska Mitrovica over a period of four months. The correlations between the recorded data were determined using a unique methodology, which is based on association rule mining. The results of the study can be further used for the reduction of the harmful combustion products, as well as for the optimization of the operation process.