Search

The research deals with the isoflavone genistein production, followed by the β-glucosidase production from Aspergillus oryzae. The Cajanus cajan leaf extract was prepared and the optimized extraction parameters were leaf powder weight (1 g), agitation time (75 min), and temperature (60°C). The optimal conditions for β-glucosidase production by submerged fermentation were 0.4% (w/v) (NH4)2SO4 as nitrogen source, 0.05% (w/v) MgSO4 as magnesium source, 2 ml (v/v) size of inoculum, and 60 min incubation time. The Al2O3 nanocrystals (NCs) were synthesized by optimal volume of leaf extract (25 ml) and procurement period (50 min) along with Al2NO3 and NaOH. The β-glucosidase immobilization on Al2O3 NCs improved the specific activity from 2.38 ± 0.002 to 5.64 ± 0.07 U·mg−1. The maximum genistein production was achieved with the rate of biotransformation (48 h) and enzyme concentration (1% (v/v)) along with the substrate level. In fourier transform infrared spectroscopy analysis, the difference between both β-glucosidases free and Al2O3 immobilized was obtained with peaks at 1,120 and 2,150 cm−1. The X-ray diffraction analysis for the NCs was obtained from 10° to 80° with several intensities. and zeta potential size distribution was recorded at 16.2% of intensity with 206.4 d nm. After immobilization, the stability of the β-glucosidase was increased, thereby increasing its potential in the pharmaceutical, biofuel, food, and beverage industries.

The purpose of this research was to examine the interaction between metabolites of Lactobacillus plantarum YW11, characterized through GC–mass spectra (MS) analysis, and the FN1 protein in cases of familial pulmonary fibrosis, found from hub genes analysis. GC–MS analysis was performed to identify metabolites in L. plantarum. Then, gene expression analysis and functional annotations were conducted to investigate the hub genes. A network of hub genes and transcription factors (TFs) was constructed, highlighting the significance of FN1 in the disease’s etiology. Molecular docking was employed to explore the interaction between the characterized metabolites and the FN1 protein. Toxicity analysis was also carried out. Thirty-two active compounds of L. plantarum YW11 were characterized by GC–MS. The gene expression analysis identified 295 differentially expressed genes, including 10 hub genes and 6 TFs, providing further support for the involvement of FN1 protein in the disease. The results of the molecular docking studies suggest the therapeutic potential of targeting FN1, with the best docking result observed for the interaction between FN1 and the 2,4-di-tert-butylphenol metabolite (energy of −6.9 kcal/mol). The toxicity analysis and molecular dynamic simulations support the suitability of 2,4-di-tert-butylphenol as a candidate for targeting FN1.

Butea monosperma is a deciduous tree, widely distributed throughout India, Burma, and Ceylon. The present study was intended to investigate the anti-inflammatory effects of Butea monosperma on the induced inflammatory model by evaluating pro-inflammatory biomarkers and their computational analysis. The anti-inflammatory activity may be attributed to the phyto-constituents for inhibitory effects on the two pro-inflammatory mediators (IL-8 and TNF-α). For this purpose, rats (n = 48) were equally divided in each group, i.e., 8 each in the negative and positive control and 32 in the experimental group with 8 rats for each dose, i.e., 50, 100, 200, and 400 mg/kg. TNF-α and IL-8 were tested by serum enzyme-linked immunosorbent assay (ELISA). The ELISA results showed 400 mg/kg dose as the potent anti-inflammatory. The binding sites of target proteins (TNF-α and IL-8) were docked with the active compounds (butrin and butein) of Butea monosperma. The butrin (target: TNF-α) and butein (target: IL-8) showed −8.4 and −6.0 kcal/mol binding energies, respectively, compared to the (diclofenac) standard drug with −6.8 kcal/mol binding energy. Hence, we concluded that Butea monosperma can be subjected to as a useful anti-inflammatory drug.

The present study highlights the true potential of Rhizopus oligosporus IIB-08 to produce lipase enzyme under solid-state fermentation and focuses on improving the properties of lipase by immobilizing it on biogenic aluminium oxide nanoparticles (Al-NPs) for better resolution of active homochiral 2-octanol. For this purpose, almond meal substrate showed 10.44 ± 0.36 U·g−1 lipase activity. The immobilization of lipase on biogenic Al-NPs prepared using Mentha spicata leaf extract led towards improved stability and catalytic efficiency, resulting in a 9.3% increase in activity compared to free enzyme. This study also examined the potential of the immobilized lipase in the effective resolution of 2-octanol. Gas chromatography-mass spectrometry confirmed the presence of lipase-catalysed fatty acids, such as linolenic acid (C18:3), linoleic acid (C18:2), palmitic acid, and oleic acid (C18:1), with palmitic acid exhibiting the highest concentration (142 μg·ml−1) at a retention time of 23.2 min. This study concludes that R. oligosporus IIB-08 is a promising source for lipase production and demonstrates the significant potential of nanoparticle-immobilized lipase in resolving pharmaceutically important organic chemicals, thereby making it a promising approach for different industrial applications. However, further scaling up is needed for better implementation in the industry.

Pseudomonas aeruginosa causes many infections worldwide. Multidrug-resistant bacteria are mostly watched in hospital-acquired infections and are linked with high mortality rates. This study aims to find a possible cure for P. aeruginosa by using an additive and synergistic combination of drugs. The Carbapenem-resistant P. aeruginosa were isolated and identified by using clinical and laboratory standards institute protocols and their antibiotic susceptibility testing was performed by using disc and well diffusion method. In computational analysis, all of the ligands and proteins were selected and docking was done using PYRX. Hundred samples were taken of isolated Gram-negative bacteria of which 25% were P. aeruginosa. Additive combinations (meropenem [MPM] + tobramycin [TOB] was 100% sensitive and imipenem + TOB was also 100% sensitive) and synergistic combinations (MPM + ciprofloxacin were 90% sensitive and amikacin and imipenem) were 100% sensitive according to CLSI protocol. In computational analysis, TOB gave the highest binding energy of −11.4, whereas MPM shows a binding energy of −9.3. In conclusion, Additive and synergistic combination of drugs showed good antibacterial activity against Pseudomonas aeruginosa. Hence it can be used as a good treatment option for P. aeruginosa.

Silver nanoparticles have special plasmonic and antibacterial characteristics that make them efficient in a variety of commercial medical applications. According to recent research, chemically synthesized silver nanoparticles are harmful even in low concentrations. It was crucial to identify appropriate synthesis methods that may have low costs and be nontoxic to the environment. Zingiber officinale (ginger) extracts used to prepare silver nanoparticles were inexpensive and environmentally friendly, and the best physicochemical characteristics were analyzed. Silver nanoparticles were characterized by using UV-visible spectroscopy, Scanning electron microscopy (SEM), and X-ray diffraction (XRD). The surface Plasmon resonance peak at 425 nm was observed using UV-Visible spectroscopy. Scanning electron microscopy observed that the nanoparticles were spherical and ranged in size from 5 to 35 nm. The XRD pattern values of 2θ: 38.2o, 46.3o, and 64.58o are used to determine the planes (111), (200), and (220). The silver nanoparticle’s existence was verified by the face-centered cubic (FCC). Silver nanoparticles were found to have antibacterial efficacy against gram-positive Staphylococcus and gram-negative bacteria such as Pseudomonas aeruginosa, Klebsiella Aerogenes, Salmonella, Staphylococcus and Escherichia coli. The antibacterial activity of silver nanoparticles was observed using the agar well diffusion (AWD) method at three different concentrations (100 μg/ml, 75 μg/ml, and 50 μg/ml). The zone of inhibition measured against the bacterial strains pseudomonas Aeruginosa, Klebsiella aerogenes, Escherichia coli, Salmonella and Staphylococcus which were (18.4±1.25 mm, 16.9±0.74 mm, 14.8±1.25 mm), (16.8±0.96 mm, 14.6±0.76 mm, 14.0±1.15 mm), (19.7±0.76 mm, 18.2±0.66 mm, 15.4±1.15 mm), (16.6±0.67 mm, 14.2±0.23 mm, 12.8±0.78 mm) and (12±0.68 mm, 10±0.20 mm, 08±0.15 mm). These nanoparticles’ potent antibacterial properties may enable them to be employed as nanomedicines for a variety of gram-negative bacterial illness treatments.

The present study was aimed to identify the indigenous fungal strains which could possibly be applied to the biore-mediation of heavy metal-contaminated soil. The contaminated soil samples of Korangi Industrial Estate Karachi were found to have total concentration of Cu 1.044 mgL1, and Pb 0.631 mgL–1. A total of eight indigenous strains of the fungus were isolated and screened for bioremediation capacity from heavy metals-contaminated soil. For the bioremediation of Lead (Pb) these same indigenous eight fungal strains were used for biological remediation. All the fungal isolated with enhanced bioremediation capability were through phenotypic and genotypical characterization. The topology of the phylograms established that the fungal isolates used in this study were allocated to: K1 (Penicillium notatum), K2 (Aspergillus parasiticus), K3 (Aspergillus fumigatus), K4 (Aspergillus flavus), K5 (Aspergillus terries), K6 (Fusarium solani), K7 (Penicillium chrysogenum), K8 (Aspergillus niger), K9 (Penicillium piceum) and K10 (Penicillium restrictum). Thus, K8 fungal isolate was found to be more efficient with maximum bioremediation capacity, for copper and lead removal efficiency, and selected for FTIR and SEM to find out the uptake of Cu and Pb which of the functional groups are involved, and further to detect the effects of bioleaching of both heavy metals on to the surface of K8 fungus biomass. The current study indicates that indigenous fungal isolates could be used with high potency to remediate or clean up the heavy metals-contaminated soil either by the technique of in situ or ex-situ bioremediation.

Treatment of inflammatory bowel disease (IBD), a common chronic intestinal disease, by exopolysaccharides (EPSs) produced by lactic acid bacteria has raised increasing concerns. Here, the EPS produced by Lactiplantibacillus plantarum NMGL2 was evaluated for its ameliorating effect on dextran sodium sulfate (DSS)-induced IBD in mice. Administration of the EPS was shown to decrease the body weight loss and the values of disease activity index (DAI) and alleviate the colon damage as evidenced by an improvement in colonic length shortening, a reduction in colonic coefficient, and a reduction in colonic mucosal architecture and inflammatory infiltration. Cytokine assay of the blood and colon tissue samples showed that the EPS could decrease the levels of pro-inflammatory TNF-α and IL-1β, and increase anti-inflammatory IL-10. Oxidative stress assay of the colon tissue showed that the nitric oxide (NO) and malondialdehyde (MDA) levels decreased significantly (p < 0.05), while superoxide dismutase (SOD) and glutathione (GSH) levels increased significantly (p < 0.05) after the EPS intervention. These results were further confirmed by the significantly (p < 0.05) down-regulated levels of NF-κB p65, p-IKKβ, and p-IκBα, and significantly (p < 0.05) enhanced expression of ZO-1 and occludin, as evaluated by Western-blot analysis of these proteins expressed in colonic tissue. The EPS produced by L. plantarum NMGL2 alleviated IBD by suppressing the NF-κB signaling pathway, suggesting its potential as a functional food agent in the prevention of IBD. [ABSTRACT FROM AUTHOR]

The depth and width of drip infiltration play a critical role in designing effective irrigation strategies. However, existing models primarily focus on continuous irrigation and fail to predict wetting patterns under intermittent drip irrigation. This study developed an infiltration model to estimate soil moisture depth and width under intermittent drip irrigation and identified strategies that enhance effective water storage. Indoor soil box simulations were conducted, with continuous drip irrigation as the control. Results showed that intermittent irrigation increased infiltration width and reduced depth, maximizing water storage efficiency. We recommend adopting an intermittent irrigation system with 1.5 h of irrigation followed by a 0.5 h interval, repeated four times. This system increased effective water storage by up to 16.23% compared to continuous irrigation. The proposed method is suitable for sandy loam farmland in southern Xinjiang and can significantly improve water use efficiency in arid regions. [ABSTRACT FROM AUTHOR]