Search

In this paper, joint precast piles with a cross-section of 400 × 400 mm and a pin-joined connection were considered, and their interaction with the soil of Western Kazakhstan has been analyzed. The following methods were used: assessment of the bearing capacity using the static compression load test (SCLT by ASTM) method, interpretation of the field test data, and the dynamic loading test (DLT) method for driving precast concrete joint piles, including Pile Driving Analyzer (PDA by ASTM) and Control and Provisioning of Wireless Access Points (CAPWAP) methods. According to the results, the composite piles tested by the PDA (by ASTM) method differ by 15 percent compared to the static load method, while the difference between the dynamic DLT (by ASTM) method and the static load (by ASTM) method was only 7 percent. So, according to the results, the alternative dynamic method DLT (by ASTM) is very effective and more accurate compared to other existing methods. [ABSTRACT FROM AUTHOR]

This article discusses the foundations of a conical shape directed with their apex downwards to increase the cross-sectional area and, accordingly, the bearing capacity during settlement and under the influence of horizontal tensile strains in undermined areas. To simulate the deformability of undermined and seismically exposed foundations, a three-dimensional expandable box was manufactured and assembled. Models of a conical foundation with an aperture angle of the cones at 90° and 80° were buried into the soil at 0.75 of its height, in order to provide a safety margin for further loading due to an increase in the bearing area when the cone is immersed deeper into the ground. Laboratory and field tests were performed on the vertical loading of single cones before and after horizontal soil displacement. Numerical modeling of the interaction between soil and foundation was carried out for conical foundation models that were considered for laboratory and field testing using the Plaxis 2D (Version 8.2) program. To compare the bearing capacity, isolated shallow foundations with a diameter equal to the cross section of the conical foundation at the intersection with the ground surface were tested. The isolated shallow foundations lost their bearing capacity after 0.15 kN in laboratory tests and after 75 kN in the field tests, while the ultimate bearing capacity of conical foundations with the similar cross section at the soil surface was not achieved, even after 0.2 kN during laboratory tests with horizontal soil displacement and at a load of 100 kN in field tests. [ABSTRACT FROM AUTHOR]

Development of a geotechnical database for the young capital of Kazakhstan, Nur-Sultan city, became a paramount concern of both the scientific community and industry. The creation of the Kazakhstan model of the geotechnical database was based on a fixed dataset which included a city map with determined X, Y, and H coordinates and the user generated data obtained from the materials of engineering and geological surveys from more than 2000 boreholes. Based on the assessment of the built-up area of the city, six main engineering-geological elements (EGE) were identified. The territory of the city was regrouped into eight zones instead of the previous six based on the geological origin and stratigraphy interposition of the EGE. Engineering properties of the soils were considered for physical and mechanical characteristics, where the plasticity limits demonstrated an accurate correlation to the elasticity modulus E and distribution boundaries between the alluvial and eluvial types of the soil on the graph. So, the increased liquid and plastic limits are replicated by higher values of elasticity modulus E, and hence better strength characteristics of a particular soil layer and vice versa, while the moisture content and soil density did not show any obvious pattern and requires additional verification on the construction site. Finally, a geotechnical map was built for the driven piles and the optimal variations in the pile length for each zone were determined. [ABSTRACT FROM AUTHOR]