Search

Proper disposal of Municipal Solid (MSW) waste is an important issue as it causes land, air, and water pollution. Organic MSW provides a habitat environment to insects and often it spreads dangerous diseases. Major reasons identified behind this as the non-separation of MSW at the source and lack of facilities (bins) in the appropriate place for collection of wastes. The present study has proposed an integrated three-stage model to provide a solution to the problem of (i) allocation of the bin for waste collection, (ii) allocation and comparison of centralized and decentralized composting plants, and finally, (iii) vehicle routing for waste collection. The proposed generic model is applied to an Indian city, Bilaspur located in the state of Chhattisgarh. From the results, it is observed that the first stage model provides an optimal number of bins required and allocation of it at minimum cost. Taking it as input for the second stage model, it identifies the best locations for centralized and decentralized composting plants. The result also reveals that decentralized composting plants are more economical than centralized plants. Finally, the third stage of the model identifies the vehicle routing for the waste collection considering both centralized and decentralized plants to minimize the cost. Further, sensitivity analysis is carried out on collection rate and participation percentage parameters to draw additional insights for better management of MSW., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Many studies have identified that incentive, subsidy, and reward-penalty mechanisms improve the collection rate of recyclables and end of life products. But there is a lack of studies mathematical models and analysis of these mechanisms in the context of municipal solid waste supply chain. Therefore, in this study, models have been formulated for municipal solid waste supply chain (profit) considering government and collectors' profit under incentive, subsidy, and reward-penalty mechanisms. The study has analysed the models against the non-separation and separation scenario of waste. A numerical analysis is performed and observed that: (i) separation of waste at source along with incentive, subsidy, and reward-penalty mechanisms scenario improve the collection rate by 17%, 23%, 30%, and 45% compared to non-separated MSW. (ii) Incentive, subsidy, and reward-penalty mechanisms increases the total supply chain profit by around 9%, -36% and 18%. (iii) reward-penalty mechanism performs better than incentive and subsidy mechanism by providing the high supply chain profit (18% and 85%) and collection rate (22% and 15%) comparatively. Further, sensitivity analysis carried out to understand the behaviour of the models against the key parameters. The study also develops interesting propositions and proved for a better understanding of the models. From results, some key managerial insights have been drawn and a few future scopes of the study are presented., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Most of existing solar thermal technologies require highly concentrated solar power to operate in the temperature range 300-600 °C. Here, thin films of refractory plasmonic TiN cylindrical nanocavities manufactured via flexible and scalable process are presented. The fabricated TiN films show polarization-insensitive 95% broadband absorption in the visible and near-infrared spectral ranges and act as plasmonic "nanofurnaces" capable of reaching temperatures above 600 °C under moderately concentrated solar irradiation (∼20 Suns). The demonstrated structures can be used to control nanometer-scale chemistry with zeptoliter (10 -21 L) volumetric precision, catalyzing C-C bond formation and melting inorganic deposits. Also shown is the possibility to perform solar thermal CO oxidation at rates of 16 mol h -1 m -2 and with a solar-to-heat thermoplasmonic efficiency of 63%. Access to scalable, cost-effective refractory plasmonic nanofurnaces opens the way to the development of modular solar thermal devices for sustainable catalytic processes.

Understanding defect chemistry, particularly ion migration, and its significant effect on the surface's optical and electronic properties is one of the major challenges impeding the development of hybrid perovskite-based devices. Here, using both experimental and theoretical approaches, we demonstrated that the surface layers of the perovskite crystals may acquire a high concentration of positively charged vacancies with the complementary negatively charged halide ions pushed to the surface. This charge separation near the surface generates an electric field that can induce an increase of optical band gap in the surface layers relative to the bulk. We found that the charge separation, electric field, and the amplitude of shift in the bandgap strongly depend on the halides and organic moieties of perovskite crystals. Our findings reveal the peculiarity of surface effects that are currently limiting the applications of perovskite crystals and more importantly explain their origins, thus enabling viable surface passivation strategies to remediate them.

Controlling crystal orientations and macroscopic morphology is vital to develop the electronic properties of hybrid perovskites. Here we show that a large-area, orientationally pure crystalline (OPC) methylammonium lead iodide (MAPbI 3 ) hybrid perovskite film can be fabricated using a thermal-gradient-assisted directional crystallization method that relies on the sharp liquid-to-solid transition of MAPbI 3 from ionic liquid solution. We find that the OPC films spontaneously form periodic microarrays that are distinguishable from general polycrystalline perovskite materials in terms of their crystal orientation, film morphology and electronic properties. X-ray diffraction patterns reveal that the film is strongly oriented in the (112) and (200) planes parallel to the substrate. This film is structurally confined by directional crystal growth, inducing intense anisotropy in charge transport. In addition, the low trap-state density (7.9 × 10 13  cm -3 ) leads to strong amplified stimulated emission. This ability to control crystal orientation and morphology could be widely adopted in optoelectronic devices.

A two-step ligand-exchange strategy is developed, in which the long-carbon- chain ligands on all-inorganic perovskite (CsPbX 3 , X = Br, Cl) quantum dots (QDs) are replaced with halide-ion-pair ligands. Green and blue light-emitting diodes made from the halide-ion-pair-capped quantum dots exhibit high external quantum efficiencies compared with the untreated QDs., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We demonstrate ultra-air- and photostable CsPbBr3 quantum dots (QDs) by using an inorganic-organic hybrid ion pair as the capping ligand. This passivation approach to perovskite QDs yields high photoluminescence quantum yield with unprecedented operational stability in ambient conditions (60 ± 5% lab humidity) and high pump fluences, thus overcoming one of the greatest challenges impeding the development of perovskite-based applications. Due to the robustness of passivated perovskite QDs, we were able to induce ultrastable amplified spontaneous emission (ASE) in solution processed QD films not only through one photon but also through two-photon absorption processes. The latter has not been observed before in the family of perovskite materials. More importantly, passivated perovskite QD films showed remarkable photostability under continuous pulsed laser excitation in ambient conditions for at least 34 h (corresponds to 1.2 × 10(8) laser shots), substantially exceeding the stability of other colloidal QD systems in which ASE has been observed.