Search

Abstract High-temperature proton exchange membrane fuel cells (HT-PEMFCs) offer solutions to challenges intrinsic to low-temperature PEMFCs, such as complex water management, fuel inflexibility, and thermal integration. However, they are hindered by phosphoric acid (PA) leaching and catalyst migration, which destabilize the critical three-phase interface within the membrane electrode assembly (MEA). This study presents an innovative approach to enhance HT-PEMFC performance through membrane modification using picosecond laser scribing, which optimises the three-phase interface by forming a graphene-like structure that mitigates PA leaching. Our results demonstrate that laser-induced modification of PA-doped membranes, particularly on the cathode side, significantly enhances the performance and durability of HT-PEMFCs, achieving a peak power density of 817.2 mW cm⁻² after accelerated stress testing, representing a notable 58.2% increase compared to untreated membranes. Furthermore, a comprehensive three-dimensional multi-physics model, based on X-ray micro-computed tomography data, was employed to visualise and quantify the impact of this laser treatment on the dynamic electrochemical processes within the MEA. Hence, this work provides both a scalable methodology to stabilise an important future membrane technology, and a clear mechanistic understanding of how this targeted laser modification acts to optimise the three-phase interface of HT-PEMFCs, which can have impact across a wide array of applications.

Abstract The design and preparation of efficient catalysts for ammonia production under mild conditions is a desirable but highly challenging target. Here, we report a series of single-atom catalysts [M-SACs, M = Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Mo(II)] derived from UiO-66 containing structural defects and their application to electrochemical reduction of nitrate (NO3 -) to ammonia (NH3). Cu-SAC and Fe-SAC exhibit remarkable yield rates for NH3 production of 30.0 and 29.0 mg h−1 cm−2, respectively, with a high Faradaic efficiency (FENH3) of over 96% at −1.0 V versus the reversible hydrogen electrode. Importantly, their catalytic performance can be retained in various simulated wastewaters. Complementary experiments confirmed the nature of single-atom sites within these catalysts and the binding domains of NO3 - in UiO-66-Cu. In situ spectroscopic techniques, coupled with density functional theory calculations confirm the strong binding of NO3 - and the formation of reaction intermediates, thus facilitating the catalytic conversion to NH3.

Abstract Solid-state spin qubits within silicon crystals at mK temperatures show great promise in the realisation of a fully scalable quantum computation platform. Qubit coherence times are limited in natural silicon owing to coupling to the 29Si isotope which has a non-zero nuclear spin. This work presents a method for the depletion of 29Si in localised volumes of natural silicon wafers by irradiation using a 45 keV 28Si focused ion beam with fluences above 1 × 1019 ions cm−2. Nanoscale secondary ion mass spectrometry analysis of the irradiated volumes shows residual 29Si concentration down to 2.3 ± 0.7 ppm and with residual C and O comparable to the background concentration in the unimplanted wafer. After annealing, transmission electron microscopy lattice images confirm the solid phase epitaxial re-crystallization of the as-implanted amorphous enriched volume extending over 200 nm in depth.

The effective containment of fission products (FPs) within tri-structural isotropic (TRISO) fuel particles is crucial for the safety and efficiency of High Temperature Gas-cooled Reactors (HTGRs). Combining multi-scale (µm to nm) and multi-dimensional (2D and 3D) analysis, this study focuses on the migration mechanisms of silver (Ag), for which the Ag-110 m FP isotope is radiotoxic, facilitated by reactions with palladium (Pd) alloys and the silicon carbide (SiC) layer at elevated temperatures (1300–1500 °C). Three primary pathways for Ag migration are identified: (1) diffusion in solid palladium silicide to form (Pd,Ag)2Si, (2) infiltration through cracks and pores in the carbon phase, and (3) liquid phase migration along SiC grain boundaries. Especially at temperatures above the melting point of Pd2Si (1404 °C), a ‘dissolution-recrystallisation’ mechanism is proposed of the Ag-Pd-Si liquid phase migrating along SiC grain boundaries. The study employs state-of-the-art in-situ heating transmission electron microscopy (TEM) techniques to directly observe the dynamic migration processes of Pd silicide within SiC, providing unprecedented insights into the liquid behaviour in TRISO fuel. These findings highlight the significant role of liquid phases in determining the transport of FPs through the TRISO-SiC which is vital for developing strategies that enhance the safety and efficacy of HTGRs.

Abstract Background Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. Results Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III)2O4), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L 2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. Conclusion Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance. Graphical Abstract

Abstract Ruthenium (Ru) is a promising electrocatalyst for the hydrogen evolution reaction (HER), despite suffering from low activity in non‐acidic conditions due to the high kinetic energy barrier of H2O dissociation. Herein, the synthesis of carbon nanosheet‐supported RuP/Ru heterostructures (RuP/Ru@CNS) from a natural polysaccharide is reported and demonstrates its behavior as an effective HER electrocatalyst in non‐acidic conditions. The RuP/Ru@CNS exhibits low overpotential (106 mV at 200 mA·cm−2) in alkaline electrolyte, exceeding most reported Ru‐based electrocatalysts. The electron shuttling between Ru atoms at the RuP/Ru interface results in a lowered energy barrier for H2O dissociation by electron‐deficient Ru atoms in the pure Ru phase, as well as optimized H* adsorption of electron‐gaining Ru atoms in the neighboring RuP. A low H* spillover energy barrier between Ru atoms at the RuP/Ru interface further boosts HER kinetics. This study demonstrates a sustainable method for the fabrication of efficient Ru‐based electrocatalysts and provides a more detailed understanding of interface effects in HER catalysis.

The contamination of water with lead from damaged perovskite solar cells is a key concern. Here, a spherical hydroxyapatite nanoparticle scaffold absorbs lead from a damaged device, keeping lead concentration in water below safe drinking limits.

Abstract High‐entropy (HE) metal chalcogenides are a class of materials that have great potential in applications such as thermoelectrics and electrocatalysis. Layered 2D transition‐metal dichalcogenides (TMDCs) are a sub‐class of high entropy metal chalcogenides that have received little attention to date as their preparation currently involves complicated, energy‐intensive, or hazardous synthetic steps. To address this, a low‐temperature (500 °C) and rapid (1 h) single source precursor approach is successfully adopted to synthesize the hexernary high‐entropy metal disulfide (MoWReMnCr)S2. (MoWReMnCr)S2 powders are characterized by powder X‐ray diffraction (pXRD) and Raman spectroscopy, which confirmed that the material is comprised predominantly of a hexagonal phase. The surface oxidation states and elemental compositions are studied by X‐ray photoelectron spectroscopy (XPS) whilst the bulk morphology and elemental stoichiometry with spatial distribution is determined by scanning electron microscopy (SEM) with elemental mapping information acquired from energy‐dispersive X‐ray (EDX) spectroscopy. The bulk, layered material is subsequently exfoliated to ultra‐thin, several‐layer 2D nanosheets by liquid‐phase exfoliation (LPE). The resulting few‐layer HE (MoWReMnCr)S2 nanosheets are found to contain a homogeneous elemental distribution of metals at the nanoscale by high angle annular dark field‐scanning transmission electron microscopy (HAADF‐STEM) with EDX mapping. Finally, (MoWReMnCr)S2 is demonstrated as a hydrogen evolution electrocatalyst and compared to 2H‐MoS2 synthesized using the molecular precursor approach. (MoWReMnCr)S2 with 20% w/w of high‐conductivity carbon black displays a low overpotential of 229 mV in 0.5 M H2SO4 to reach a current density of 10 mA cm−2, which is much lower than the overpotential of 362 mV for MoS2. From density functional theory calculations, it is hypothesised that the enhanced catalytic activity is due to activation of the basal plane upon incorporation of other elements into the 2H‐MoS2 structure, in particular, the first row TMs Cr and Mn.

Abstract The use of two-dimensional materials in bulk functional applications requires the ability to fabricate defect-free 2D sheets with large aspect ratios. Despite huge research efforts, current bulk exfoliation methods require a compromise between the quality of the final flakes and their lateral size, restricting the effectiveness of the product. In this work, we describe an intercalation-assisted exfoliation route, which allows the production of high-quality graphene, hexagonal boron nitride, and molybdenum disulfide 2D sheets with average aspect ratios 30 times larger than that obtained via conventional liquid-phase exfoliation. The combination of chlorosulfuric acid intercalation with in situ pyrene sulfonate functionalisation produces a suspension of thin large-area flakes, which are stable in various polar solvents. The described method is simple and requires no special laboratory conditions. We demonstrate that these suspensions can be used for fabrication of laminates and coatings with electrical properties suitable for a number of real-life applications.

Here, the authors observe reversible nonreciprocal charge transport in two-dimensional NbSe2, and demonstrate antenna devices exhibiting strong sensitivity to driving AC electromagnetic waves in the superconducting regime.

Low-cost, mass-scalable production routes which preserve the quality of the single crystals are required to up-scale van der Waals materials. Here, the authors demonstrate an approach to realise a variety of functional heterostructures based on van der Waals nanocrystal films produced through the mechanical abrasion of bulk powders.

A plethora of solid-state nanodevices rely on engineering the quantization of electrons in quantum wells. Here, the authors leverage the thickness of exfoliated 2D crystals to control the quantum well dimensions in few-layer semiconductor InSe and investigate the resonance features in the tunnelling current, photoabsorption and light emission spectra.

TiS2 oxidation: moisture is the critical element preventing environmental stability The degradation dynamics of TiS2 reveal that the flakes oxidise in water and atmosphere, pointing towards moisture as the key driving force. A team led by Valeria Nicolosi at Trinity College Dublin used advanced electron microscopy techniques to investigate the influence of different environments on the deterioration pathways of TiS2, a promising candidate for future energy storage applications. By comparing the effect of ex-situ oxidation by water and oxygen at room temperature, and in-situ oxidation at high temperatures, water was proven to effectively oxidise the TiS2 flakes from the edges thereby forming an amorphous oxide phase. Conversely, the degradation was found to proceed more slowly in atmosphere or vacuum conditions. These results suggest that TiS2 oxidation could be avoided in a desiccated environment that would prevent water molecules from dissociating in reactive ionic species.

Abstract Plasmon-induced phenomena have recently attracted considerable attention. At the same time, relatively little research has been conducted on electrochemistry mediated by plasmon excitations. Here we report plasmon-induced formation of nanoscale quantized conductance filaments within metal-insulator-metal heterostructures. Plasmon-enhanced electromagnetic fields in an array of gold nanodots provide a straightforward means of forming conductive CrOx bridges across a thin native chromium oxide barrier between the nanodots and an underlying metallic Cr layer. The existence of these nanoscale conducting filaments is verified by transmission electron microscopy and contact resistance measurements. Their conductance was interrogated optically, revealing quantised relative transmission of light through the heterostructures across a wavelength range of 1–12 μm. Such plasmon-induced electrochemical processes open up new possibilities for the development of scalable devices governed by light.

Layered materials are held together by weak van der Waals forces facilitating layer-by-layer cleavage. Here, the authors demonstrate mechanical exfoliation of a naturally occurring franckeite mineral heterostructure, possessing p-type conductivity and remarkable electrochemical properties.

Despite being of wide commercial use in devices, the orders of magnitude increase in resistance that can be seen in some semiconducting BaTiO3-based ceramics, on heating through the Curie temperature (TC), is far from well understood. Current understanding of the behavior hinges on the role of grain boundary resistance that can be modified by polarization discontinuities which develop in the ferroelectric state. However, direct nanoscale resistance mapping to verify this model has rarely been attempted, and the potential approach to engineer polarization states at the grain boundaries, that could lead to optimized positive temperature coefficient (PTC) behavior, is strongly underdeveloped. Here we present direct visualization and nanoscale mapping in a commercially optimized BaTiO3–PbTiO3–CaTiO3 PTC ceramic using Kelvin probe force microscopy, which shows that, even in the low resistance ferroelectric state, the potential drop at grain boundaries is significantly greater than in grain interiors. Aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy reveal new evidence of Pb-rich grain boundaries symptomatic of a higher net polarization normal to the grain boundaries compared to the purer grain interiors. These results validate the critical link between optimized PTC performance and higher local polarization at grain boundaries in this specific ceramic system and suggest a novel route towards engineering devices where an interface layer of higher spontaneous polarization could lead to enhanced PTC functionality.

BACKGROUND:Antimicrobials are used to directly control bacterial infections in pet (ornamental) fish and are routinely added to the water these fish are shipped in to suppress the growth of potential pathogens during transport. METHODOLOGY/PRINCIPAL FINDINGS:To assess the potential effects of this sustained selection pressure, 127 Aeromonas spp. isolated from warm and cold water ornamental fish species were screened for tolerance to 34 antimicrobials. Representative isolates were also examined for the presence of 54 resistance genes by a combination of miniaturized microarray and conventional PCR. Forty-seven of 94 Aeromonas spp. isolates recovered from tropical ornamental fish and their carriage water were tolerant to > or =15 antibiotics, representing seven or more different classes of antimicrobial. The quinolone and fluoroquinolone resistance gene, qnrS2, was detected at high frequency (37% tested recent isolates were positive by PCR). Class 1 integrons, IncA/C broad host range plasmids and a range of other antibiotic resistance genes, including floR, bla(TEM-1), tet(A), tet(D), tet(E), qacE2, sul1, and a number of different dihydrofolate reductase and aminoglycoside transferase coding genes were also detected in carriage water samples and bacterial isolates. CONCLUSIONS:These data suggest that ornamental fish and their carriage water act as a reservoir for both multi-resistant bacteria and resistance genes.