Search

Single atoms or ions on surfaces affect processes from nucleation 1 to electrochemical reactions 2 and heterogeneous catalysis 3. Transmission electron microscopy is a leading approach for visualizing single atoms on a variety of substrates 4,5. It conventionally requires high vacuum conditions, but has been developed for in situ imaging in liquid and gaseous environments 6,7 with a combined spatial and temporal resolution that is unmatched by any other method—notwithstanding concerns about electron-beam effects on samples. When imaging in liquid using commercial technologies, electron scattering in the windows enclosing the sample and in the liquid generally limits the achievable resolution to a few nanometres 6,8,9. Graphene liquid cells, on the other hand, have enabled atomic-resolution imaging of metal nanoparticles in liquids 10. Here we show that a double graphene liquid cell, consisting of a central molybdenum disulfide monolayer separated by hexagonal boron nitride spacers from the two enclosing graphene windows, makes it possible to monitor, with atomic resolution, the dynamics of platinum adatoms on the monolayer in an aqueous salt solution. By imaging more than 70,000 single adatom adsorption sites, we compare the site preference and dynamic motion of the adatoms in both a fully hydrated and a vacuum state. We find a modified adsorption site distribution and higher diffusivities for the adatoms in the liquid phase compared with those in vacuum. This approach paves the way for in situ liquid-phase imaging of chemical processes with single-atom precision.

In the UK, decommissioning of legacy spent fuel storage facilities involves the retrieval of radioactive sludges that have formed as a result of corrosion of Magnox nuclear fuel. Retrieval of sludges may re-suspend a colloidal fraction of the sludge, thereby potentially enhancing the mobility of radionuclides including uranium. The colloidal properties of the layered double hydroxide (LDH) phase hydrotalcite, a key product of Magnox fuel corrosion, and it’s interactions with U(VI) are of interest. This is because colloidal hydrotalcite is a potential transport vector for U(VI) under the neutral-to-alkaline conditions characteristic of the legacy storage facilities and other nuclear decommissioning scenarios. Here, a multi-technique approach was used to investigate the colloidal stability of hydrotalcite and the U(VI) sorption mechanism(s) across pH 7 – 11.5 and with variable U(VI) surface loadings (0.01 – 1 wt%). Overall, hydrotalcite was found to form stable colloidal suspensions between pH 7 and 11.5, with some evidence for Mg2+ leaching from hydrotalcite colloids at pH ≤ 9. For systems with U present, >98% of U(VI) was removed from solution in the presence of hydrotalcite, regardless of pH and U loading, although the sorption mode was affected by both pH and U concentration. Under alkaline conditions, U(VI) surface precipitates formed on the colloidal hydrotalcite nanoparticle surface. Under more circumneutral conditions, Mg2+ leaching from hydrotalcite and more facile exchange of interlayer carbonate with the surrounding solution led to the formation of uranyl carbonate species (e.g. Mg[UO2(CO3)3]2-(aq)). Both X-ray absorption spectroscopy (XAS) and luminescence analysis confirmed these negatively charged species sorbed as both outer- and inner-sphere tertiary complexes on the hydrotalcite surface. These results demonstrate that hydrotalcite can form pseudo-colloids with U(VI) under a wide range of pH conditions and have clear implications for understanding uranium behaviour in environments where hydrotalcite and other LDHs may be present.

Antimony is an emerging contaminant that shares chemical characteristics with arsenic. Metal-reducing bacteria (such as Geobacter sulfurreducens ) can cause the mobilization of arsenic from Fe(III) minerals under anaerobic conditions, causing widespread contamination of aquifers worldwide.

Silica nanosheets (SN) derived from natural vermiculite (Verm) were successfully incorporated into polyethersulfone–polyvinylpyrrolidone (PES–PVP) polymer to fabricate high–temperature proton exchange membranes (HT–PEMs). The content of SN filler was varied (0.1–0.75 wt%) to study its influence on proton conductivity, power density and durability. Benefiting from the hydroxyl groups of SN that enable the formation of additional proton–transferring pathways, the inorganic–organic membrane displayed enhanced proton conductivity of 48.2 mS/cm and power density of 495 mW/cm2 at 150 °C without humidification when the content of SN is 0.25 wt%. Furthermore, exfoliated SN (E–SN) and sulfonated SN (S–SN), which were fabricated by a liquid–phase exfoliation method and silane condensation, respectively, were embedded in PES–PVP polymer matrix by a simple blending method. Due to the significant contribution from sulfonic groups in S–SN, the membrane with 0.25 wt% S–SN reached the highest proton conductivity of 51.5 mS/cm and peak power density of 546 mW/cm2 at 150 °C, 48% higher than the pristine PES–PVP membranes. Compared to unaltered PES–PVP membrane, SN added hybrid composite membrane demonstrated excellent durability for the fuel cell at 150 °C. Using a facile method to prepare 2D SN from natural clay minerals, the strategy of exfoliation and functionalization of SN can be potentially used in the production of HT–PEMs.

Mn promotion in FT can direct products between oxygenates and paraffins. A simple in situ treatment forms MnTiO3 while an ex situ support is demonstrated with the benefits of Mn inclusion while controlling activity and inhibiting alcohol selectivity.

Perovskite solar cell efficiency and stability are improved by π-conjugated aromatic additives that are hydrophobic or hydrophilic due to strong binding with the perovskite.

Fluorescent InP-based quantum dots have emerged as valuable nanomaterials for display technologies, biological imaging, and optoelectronic applications. The inclusion of zinc can enhance both their emissive and structural properties and reduce interfacial defects with ZnS or CdS shells. However, the sub-particle distribution of zinc and the role this element plays often remains unclear, and it has previously proved challenging to synthesise Zn-alloyed InP-based nanoparticles using aminophosphine precursors. In this report, we describe the synthesis of alloyed InZnP using zinc carboxylates, achieving colour-tuneable fluorescence from the unshelled core materials, followed by a one-pot ZnS or CdS deposition using diethyldithiocarbamate precursors. Structural analysis revealed that the "core/shell" particles synthesised here were more accurately described as homogeneous extended alloys with the constituent shell elements diffusing through the entire core, including full-depth inclusion of zinc.

An important aspect of immunotherapy is the ability of dendritic cells (DCs) to prime T cell immunity, an approach that has yielded promising results in some early phase clinical trials. However, novel approaches are required to improve DC therapeutic efficacy by enhancing their uptake of, and activation by, disease relevant antigens. The carbon nano-material graphene oxide (GO) may provide a unique way to deliver antigen to innate immune cells and modify their ability to initiate effective adaptive immune responses. We have assessed whether GO of various lateral sizes affects DC activation and function in vitro and in vivo, including their ability to take up, process and present the well-defined model antigen ovalbumin (OVA). We have found that GO flakes are internalised by DCs, while having minimal effect on their viability, activation phenotype or cytokine production. Although adsorption of OVA protein to either small or large GO flakes promoted its uptake into DCs, large GO interfered with OVA processing. In terms of modulation of DC function, delivery of OVA via small GO flakes significantly enhanced DC ability to induce proliferation of OVA-specific CD4 T cells, promoting granzyme B secretion in vitro. On the other hand, delivery of OVA via large GO flakes augmented DC ability to induce proliferation of OVA-specific CD8 T cells, and their production of IFN-γ and granzyme B. Together, these data demonstrate the capacity of GO of different lateral dimensions to act as a promising delivery platform for DC modulation of distinct facets of the adaptive immune response, information that could be exploited for future development of targeted immunotherapies., his work was supported by the Engineering and Physical Sciences Research Council (EPSRC) under the 2D-Health Programme Grant [EP/P00119X/1]. The Nanomedicine Group at ICN2 is partially supported by the CERCA programme, Generalitat de Catalunya, and the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706).

We have synthesized the first reported example of quantum confined high entropy (HE) nanoparticles, using the lanthanide oxysulfide, Ln2SO2, system as the host phase for a equimolar mixture of Pr, Nd, Gd, Dy and Er. A uniform HE phase was achieved via the simultaneous thermolysis of a mixture of lanthanide dithiocarbamate precursors in solution. This was confirmed by powder X-ray diffraction and high-resolution scanning transmission electron microscopy, with energy dispersive X-ray spectroscopic mapping confirming the uniform distribution of the lanthanides throughout the particles. The nanoparticle dispersion displayed a significant blue shift in the absorption and photoluminescence spectra relative to our previously reported bulk sample with the same composition, with an absorption edge at 330 nm and a λmax at 410 nm compared to the absorption edge at 500 nm and a λmax at 450 nm in the bulk, which is indicative of quantum confinement. We support this postulate with experimental and theoretical analysis of the band gap energy as a function of strain and surface effects (ligand binding) and calculation of the Bohr exciton radius for the end member compounds.

Pt-based bimetallic electrocatalysts are promising candidates to convert surplus glycerol from the biodiesel industry to value-added chemicals and coproduce hydrogen. It is expected that the nature and content of the elements in the bimetallic catalyst can not only affect the reaction kinetics but also influence the product selectivity, providing a way to increase the yield of the desired products. Hence, in this work, we investigate the electrochemical oxidation of glycerol on a series of PtNi nanoparticles with increasing Ni content using a combination of physicochemical structural analysis, electrochemical measurements, operando spectroscopic techniques, and advanced product characterizations. With a moderate Ni content and a homogenously alloyed bimetallic Pt-Ni structure, the PtNi2 catalyst displayed the highest reaction activity among all materials studied in this work. In situ FTIR data show that PtNi2 can activate the glycerol molecule at a more negative potential (0.4

The development of intrinsically safe and environmentally sustainable energy storage devices is a significant challenge. Recent advances in aqueous rechargeable lithium-ion batteries (ARLIBs) have made considerable steps in this direction. In parallel to the ongoing progress in the design of aqueous electrolytes that expand the electrochemically-stable potential window, the design of negative electrode materials exhibiting large capacity and low intercalation potential attracts great research interest. Herein, we report the synthesis of high purity nanoscale Chevrel Phase (CP) Mo6S8 via a simple, efficient and controllable molecular precursor approach with significantly decreased energy consumption compared to the conventional approaches. Physical characterization of the obtained product confirms the successful formation of CP-Mo6S8 and reveals its crystal structure in the nanoscale range. Due to their unique structural characteristics, the Mo6S8 nanocubes exhibit fast kinetics in a 21 m lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte as a result of the shorter Li+ ion diffusion distance. Full battery cells comprised of Mo6S8 and LiMn2O4 as negative and positive electrode materials, respectively, operate at 2.23 V delivering a high energy density of 85 Wh/kg (calculated on the total mass of active materials) under 0.2 C-rate. At 4 C, the Coulombic efficiency (CE) is determined to be 99% increasing to near 100% at certain cycles. Post-mortem physical characterization demonstrates that the Mo6S8 anode maintained its crystallinity, thereby exhibiting outstanding cycling stability. The cell outperforms the commonly used vanadium-based (VO2 (B), V2O5) or (NASICON)-type LiTi2(PO4)3 anodes, highlighting the promising character of the nanoscale CP-Mo6S8 as a highly efficient anode material. In summary, the proposed synthetic strategy is expected to stimulate novel research towards the widespread application of CP-based materials in various aqueous and non-aqueous energy storage systems.

Fabrics—materials consisting of layers of woven fibres—are some of the most important materials in everyday life1. Previous nanoscale weaves2–16 include isotropic crystalline covalent organic frameworks12–14 that feature rigid helical strands interlaced in all three dimensions, rather than the two-dimensional17,18 layers of flexible woven strands that give conventional textiles their characteristic flexibility, thinness, anisotropic strength and porosity. A supramolecular two-dimensional kagome weave15 and a single-layer, surface-supported, interwoven two-dimensional polymer16 have also been reported. The direct, bottom-up assembly of molecular building blocks into linear organic polymer chains woven in two dimensions has been proposed on a number of occasions19–23, but has not previously been achieved. Here we demonstrate that by using an anion and metal ion template, woven molecular ‘tiles’ can be tessellated into a material consisting of alternating aliphatic and aromatic segmented polymer strands, interwoven within discrete layers. Connections between slowly precipitating pre-woven grids, followed by the removal of the ion template, result in a wholly organic molecular material that forms as stacks and clusters of thin sheets—each sheet up to hundreds of micrometres long and wide but only about four nanometres thick—in which warp and weft single-chain polymer strands remain associated through periodic mechanical entanglements within each sheet. Atomic force microscopy and scanning electron microscopy show clusters and, occasionally, isolated individual sheets that, following demetallation, have slid apart from others with which they were stacked during the tessellation and polymerization process. The layered two-dimensional molecularly woven material has long-range order, is birefringent, is twice as stiff as the constituent linear polymer, and delaminates and tears along well-defined lines in the manner of a macroscopic textile. When incorporated into a polymer-supported membrane, it acts as a net, slowing the passage of large ions while letting smaller ions through. An anion and metal ion template is used to form woven polymer patches that are joined together by polymerization into a fully woven, two-dimensional, molecular patchwork.

In situ TEM gas-cell imaging and spectroscopy with in situ XRD have been applied to reveal morphological changes in NiFe2O4@Co3O4 core–shell nanoparticles in hydrogen. The core–shell structure is retained upon reduction under mild conditions (180 °C for 1 h), resulting in a partially reduced shell. The core–shell structure was retained after exposing these reduced NiFe2O4@Co3O4 core–shell nanoparticles to Fischer–Tropsch conditions at 230 °C and 20 bar. Slightly harsher reduction (230 °C, 2 h) resulted in restructuring of the NiFe2O4@Co3O4 core–shell nanoparticles to form cobalt islands in addition to partially reduced NiFe2O4. NiFe2O4 underwent further transformation upon exposure to Fischer–Tropsch conditions, resulting in the formation of iron carbide and nickel/iron–nickel alloy. The turnover frequency in the Fischer–Tropsch synthesis over NiFe2O4@Co3O4 core–shell nanoparticles reduced in hydrogen at 180 °C for 1 h was estimated to be less than 0.02 s–1 (cobalt-time yield of 8.40 μmol.g-1.s–1) with a C5+ selectivity of 38 C-%. The low turnover frequency under these conditions in relation to the turnover frequency obtained with unsupported cobalt is attributed to the strain in the catalytically active cobalt.

Single-particle reconstruction can be used to perform three-dimensional (3D) imaging of homogeneous populations of nano-sized objects, in particular viruses and proteins. Here, it is demonstrated that it can also be used to obtain 3D reconstructions of heterogeneous populations of inorganic nanoparticles. An automated acquisition scheme in a scanning transmission electron microscope is used to collect images of thousands of nanoparticles. Particle images are subsequently semi-automatically clustered in terms of their properties and separate 3D reconstructions are performed from selected particle image clusters. The result is a 3D dataset that is representative of the full population. The study demonstrates a methodology that allows 3D imaging and analysis of inorganic nanoparticles in a fully automated manner that is truly representative of large particle populations.

Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamicdrag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. Onesolution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be usedas propellant for an electric thruster. The system would minimize the requirement of limited propellantavailability and can also be applied to any planet with atmosphere, enabling new mission at low altituderanges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygenin Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids,electrodes, and discharge channels of conventional EP systems. IRS is developing within the DISCOVERERproject, an intake and a thruster for an ABEP system. The paper describes the design and implementationof the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design andimplementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonanceimaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. This isaided by the numerical tool XFdtd®. The IPT is based on RF electrodeless operation aided by an externallyapplied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector,and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is tominimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by theformation of helicon waves within the plasma that are to improve the overall efficiency and achieve higherexhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedureis presented This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 737183

The rise of two-dimensional (2D) crystalline superconductors has opened a new frontier of investigating unconventional quantum phenomena in low dimensions. However, despite the enormous advances achieved towards understanding the underlying physics, practical device applications like sensors and detectors using 2D superconductors are still lacking. Here, we demonstrate nonreciprocal antenna devices based on atomically thin NbSe2. Reversible nonreciprocal charge transport is unveiled in 2D NbSe2 through multi-reversal antisymmetric second harmonic magnetoresistance isotherms. Based on this nonreciprocity, our NbSe2 antenna devices exhibit a reversible nonreciprocal sensitivity to externally alternating current (AC) electromagnetic waves, which is attributed to the vortex flow in asymmetric pinning potentials driven by the AC driving force. More importantly, a successful control of the nonreciprocal sensitivity of the antenna devices has been achieved by applying electromagnetic waves with different frequencies and amplitudes. The device’s response increases with increasing electromagnetic wave amplitude and exhibits prominent broadband sensing from 5 to 900 MHz., Here, the authors observe reversible nonreciprocal charge transport in two-dimensional NbSe2, and demonstrate antenna devices exhibiting strong sensitivity to driving AC electromagnetic waves in the superconducting regime.

Metal sulfide and metal oxide alloys of the form Mo1-x W x S2 and Mo1-x W x O3 (0 ≤ x ≤ 1) are synthesized with varying nominal stoichiometries (x = 0, 0.25, 0.50, 0.75, and 1.0) by thermolysis of the molecular precursors MoL4 and WS(S2)L2 (where L = S2CNEt2) in tandem and in various ratios. Either transition-metal dichalcogenides or transition-metal oxides can be produced from the same pair of precursors by the choice of reaction conditions; metal sulfide alloys of the form Mo1-x W x S2 are produced in an argon atmosphere, while the corresponding metal oxide alloys Mo1-x W x O3 are produced in air, both under atmospheric pressure at 450 °C and for only 1 h. Changes in Raman spectra and in powder X-ray diffraction patterns are observed across the series of alloys, which confirm that alloying is successful in the bulk materials. For the oxide materials, we show that the relatively complicated diffraction patterns are a result of differences in the tilt angle of MO6 octahedra within three closely related unit cell types. Alloying of Mo and W in the products is characterized at the microscale and nanoscale by scanning electron microscopy-energy-dispersive X-ray spectroscopy (EDX) and scanning transmission electron microscopy-EDX spectroscopy, respectively.

Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely adopted by both the academic and industrial sectors. The fragmentation and exfoliation mechanisms involved have usually been simply attributed to the force induced by ultrasound and the interaction with the solvent molecules. Nonetheless, little is known about how they actually occur, i.e., how thick and large graphite crystals can be exfoliated into thin and small graphene flakes. Here, we demonstrate that during ultrasonic LPE the transition from graphite flakes to graphene takes place in three distinct stages. First, sonication leads to the rupture of large flakes and the formation of kink band striations on the flake surfaces, primarily along zigzag directions. Second, cracks form along these striations, and together with intercalation of solvent, lead to the unzipping and peeling off of thin graphite strips that in the final stage are exfoliated into graphene. The findings will be of great value in the quest to optimize the lateral dimensions, thickness, and yield of graphene and other 2D materials in large-scale LPE for various applications.

Van der Waals heterostructures form a massive interdisciplinary research field, fueled by the rich material science opportunities presented by layer assembly of artificial solids with controlled composition, order and relative rotation of adjacent atomic planes. Here we use atomic resolution transmission electron microscopy and multiscale modeling to show that the lattice of MoS$_2$ and WS$_2$ bilayers twisted to a small angle, $\theta

Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an efficient strategy for synthesising telluride CSNPs with thin amorphous shells using aqueous cation exchange (ACE). By changing the synthesis temperature in the range 40 to 110C, the crystallinity of the CdTe nanoparticles was controllable from perfect crystals with no detectable amorphous shell (c-CdTe) to a core-shell structure with a crystalline CdTe NP core covered by an amorphous shell of tunable thickness up to 7-8nm (c@a-CdTe) . A second ACE step transformed the c@a-CdTe to crystalline CdTe@HgTe core-shell NPs. The c@a-CdTe nanoparticles synthesized at 60C and having a 4-5 nm thick amorphous shell, exhibited the highest surface-enhanced Raman scattering activity with a high enhancement factor around 8.82x10^5, attributed to the coupling between the amorphous shell and the crystalline core., Comment: 15 pages, 5 figures, plus supplementary information

Exsolution of stable metallic nanoparticles for use as efficient electrocatalysts has been of increasing interest for a range of energy technologies. Typically, exsolved nanoparticles show higher thermal and coarsening stability compared to conventionally deposited catalysts. Here, A-site deficient double perovskite oxides, La2-xNiRuO6-δ (x = 0.1 and 0.15), are designed and subjected to low-temperature reduction leading to exsolution. The reduced double perovskite materials are shown to exsolve nanoparticles of 2–6 nm diameter during the reduction in the low-temperature range of 350–450 °C. The nanoparticle sizes are found to increase after reduction at the higher temperature (450 °C), suggesting diffusion-limited particle growth. Interestingly, both nickel and ruthenium are co-exsolved during the reduction process. The formation of bimetallic nanoparticles at such low temperatures is rare. From the in situ impedance spectroscopy measurements of the double perovskite electrode layers, the onset of the exsolution process is found to be within the first few minutes of the reduction reaction. In addition, the area-specific resistance of the electrode layers is found to decrease by 90% from 291 to 29 Ω cm2, suggesting encouraging prospects for these low-temperature rapidly exsolved Ni/Ru alloy nanoparticles in a range of catalytic applications.

Convergent beam electron diffraction (CBED) performed on two-dimensional (2D) materials recently emerged as a powerful tool to study structural and stacking defects, adsorbates, atomic 3D displacements in the layers, and the interlayer distances. The formation of the interference patterns in individual CBED spots of 2D crystals can be considered as a hologram, thus the CBED patterns can be directly reconstructed by conventional reconstruction methods adapted from holography. In this study, we review recent results applying CBED to 2D crystals and their heterostructures: holographic CBED on bilayers with the reconstruction of defects and the determination of interlayer distance, CBED on 2D crystal monolayers to reveal adsorbates, and CBED on multilayered van der Waals systems with moiré patterns for local structural determination.

In this work, we applied low-field, NMR spin–lattice measurements to evaluate for the first time the effect of carbonization temperature (range 600–1000 ℃) on the preparation of Alumina-Carbon Molecular Sieve Membranes (Al-CMSMs), providing new insights into intra-pore fluid interactions. The results show that the average Al-CMSM pore size generally increases with carbonization temperature whilst the hydrophilicity of the pore surface, and the amount of strongly adsorbed H2O, decreases with an increasing carbonization temperature. As such, lower carbonization temperatures produce more hydrophilic membranes, with further evidence provided by FTIR measurements demonstrating the presence of polar functional groups on the surface, with water interacting more strongly with the membrane surface, as evidenced by NMR. It was found that the Al-CMSM carbonization temperature significantly affected permeance and H2O/CH4 permselectivity by altering the membrane pore size distribution and pore hydrophilicity. H2O permeance values are seen to be up to 100 times larger than respective CH4 permeance values. The greater permeance of H2O is attributed to the larger kinetic diameter of CH4 relative to H2O and the adsorption of water in the hydrophilic pores enhancing the adsorption-diffusion transport mechanism. Optimal water permeation temperatures are thus higher for the more hydrophilic membranes, obtained at lower carbonization temperatures, as more energy is required to remove strongly adsorbed water blocking the pores. At higher carbonization temperatures, the Knudsen diffusion mechanism of permeance dominates over the adsorption-diffusion mechanism thereby reducing permeance as diffusion slows due to collisions between gas molecules and the pore walls. CH4 permeation always occurs via Knudsen diffusion with CH4 permeance increasing with permeation temperature due to the increased rate of CH4 diffusion.