Search

Pulsed light (PL) treatment can effectively reduce microbial populations in clear substrates and on surfaces, but its effectiveness varies as a function of substrate or treatment-related factors. For PL to be successfully adopted by the food industry, all factors of influence, as well as the inactivation kinetics for the microorganisms of concern, must be elucidated. In this study, the inactivation kinetics of Listeria innocua and the effect of inoculum size on PL inactivation were investigated. Stainless steel coupons (50.8 by 101.6 mm) of defined surface properties and transparent glass chamber slides (25.4 by 50.8 by 10 mm) were each inoculated with 1 ml of aqueous suspensions of L. innocua containing inoculum populations of up to 10(9) CFU. The thickness of the liquid layer in the glass slides was 1.16 mm. The inoculated substrates were exposed to PL treatment of up to 17 J/cm2 in a static PL chamber equipped with a pulsed Xenon lamp. Survivors were recovered and enumerated by both standard plate counting and most-probable-number procedures. The data indicated that in clear liquids, PL resulted in more than a 6-log reduction of L. innocua after a 12-J/cm2 treatment, regardless of the initial inoculum size. For the stainless steel surfaces, less than a 4-log reduction after a 12-J/cm2 treatment and a noticeable effect of substrate characteristics and inoculum size on inactivation were observed. The survivor curves showed pronounced tailing for all substrates used in the study. The Weibull model accurately predicted the survivor ratios for the PL treatment of L. innocua in clear liquids, with a shape and scale parameter of 0.33 and 3.01, respectively. The Weibull model resulted in significant overestimation of PL effectiveness for the stainless steel substrates, where the influence of various substrate properties and inoculum level on inactivation was significant.

Pulsed light (PL) treatment has been proven effective for killing a wide variety of microorganisms on foods and food contact materials. However, there is concern regarding how shading may impact the effectiveness of PL when applied to imperfect surfaces. The main objective of this work was to examine how surface properties, particularly topography, influence the microbicidal effect of PL. Four types of stainless-steel surfaces were inoculated with Listeria innocua and treated with up to 12 pulses of light. The highest level of inactivation achieved was about a 4-log reduction. Initially, an increase in inactivation with increasing treatment intensity was observed, but the inactivation curves tailed off above 3 light pulses. The differences in inactivation levels among the 4 finishes at specific treatment levels were rather insignificant, but some interesting trends were observed. At low treatment levels, inactivation on the smoothest finish was slightly lower than for the other surfaces, due to clustering of the cells on the highly hydrophobic smooth surface and to its reflective nature. For the roughest surface, scanning electron microscopy (SEM) imaging confirmed the preferential location of the cells inside surface features, which also promoted a relatively uniform distribution of the cells across the surface. This counter balanced to some extent of the shading effects, and as a result inactivation on the roughest surface was comparable to inactivation on the smoother surfaces. These results demonstrate that PL can be effective on both smooth and rough surfaces, but also indicate a complex effect of various surface properties on inactivation.

Numerous, well-developed spherulites exhibiting strong birefringence were formed in aqueous dispersions of mung bean and potato starch rapidly quenched (150 °C/min) from 180 °C. Ordinary maize starch yielded less numerous, less well-developed, coarse spherulites than did mung bean and potato starch. Acid-modified maize starch yielded large numbers of very round spherulites displaying moderately strong birefringence. Wheat, tapioca and arrowroot starches formed few or very poorly developed spherulites. No spherulitic morphology was observed in oat, rice, or sorghum starch dispersions. Equivocal results were obtained for amaranth and yellow pea starches. Potato and mung bean starches required heating to at least 170 °C before spherulite formation was observed. Acid-modified maize starch formed spherulites after heating to only 160 °C and possibly as low as 150 °C.

Pulsed light (PL) treatment is an alternative to traditional thermal treatment that has the potential to achieve several log-cycle reductions in the concentration of microorganisms. One issue that is still debated is related to what specifically causes cell death after PL treatments. The main objective of this work was to elucidate which portions of the PL range are responsible for bacterial inactivation. Stainless steel coupons with controlled surface properties were inoculated with a known concentration of Listeria innocua in the stationary growth phase and treated with 1 to 12 pulses of light at a pulse rate of 3 pulses per s and a pulse width of 360 micros. The effects of the full spectrum (lambda = 180 to 1,100 nm) were compared with the effects obtained when only certain regions of UV, visible, and near-infrared light were used. The effectiveness of the treatments was determined in parallel by the standard plate count and most-probable-number techniques. At a fluence of about 6 J/cm(2), the full-spectrum PL treatment resulted in a 4.08-log reduction of L. innocua on a Mill finish surface, the removal of lambda200 nm diminished the reduction to only 1.64 log, and total elimination of UV light resulted in no lethal effects on L. innocua. Overwhelmingly, the portions of the PL spectrum responsible for bacterial death are the UV-B and UV-C spectral ranges (X300 nm), with some death taking place during exposure to UV-A radiation (300lambda400 nm) and no observable death upon exposure to visible and near-infrared light (lambda400 nm). This work provides additional supporting evidence that cell death in PL treatment is due to exposure to UV light. Additionally, it was shown that even a minor modification of the light path or the UV light spectrum in PL treatments can have a significant negative impact on the treatment intensity and effectiveness.