Search

Purpose: Various studies show that the disparities in the posterior tibial slope can make native cruciate ligaments and the menisci susceptible to tears. This study is to determine the relationship between posterior tibial slope with the anterior cruciate ligament, posterior cruciate ligament and meniscal injuries. Methods: A total of 72 subjects between 18 and 60 years having a history of traumatic knee pain were included in the study. All subjects were clinically examined, radiologically investigated, and the posterior tibial slope of the patients was calculated. Incidences of cruciate ligaments and menisci injury were identified. Results: In our study, the mean medial compartment posterior tibial slope and lateral compartment posterior tibial slope in all the Anterior Cruciate Ligament injured patients are 7.82 ± 2.56 and 10.53 ± 3.46. But in controls, it is 5.91 ± 4.49 and 6.24 ± 5.15, respectively. The differences are statistically significant (p 10). In cases with increased lateral Posterior Tibial Slope, more degeneration was seen in the lateral meniscus. Less Posterior Tibial Slope is associated with Posterior Cruciate Ligament tears. Conclusion: Anterior cruciate ligament is more prone to tears with a steeper posterior tibial slope. Lateral Meniscus tear is frequently associated with acute Anterior Cruciate Ligament injury and Medial Meniscus tear is predominantly associated with a chronic Anterior Cruciate Ligament injury. A decreased posterior tibial slope is more often associated with patients with a posterior cruciate ligament injury and is considered a risk factor for native Posterior Cruciate Ligament. [ABSTRACT FROM AUTHOR]

Purpose: The anterior cruciate ligament in the knee is commonly prone to injuries. Reconstruction of this ligament with hamstring tendon has been time-tested but peroneus longus autograft is also gaining popularity. However, very limited literature is available comparing the two grafts. This study aims to compare the functional outcome and donor site morbidity between hamstrings and peroneus longus autograft in anterior cruciate ligament reconstruction. Methods: Aprospective randomised study was conducted on 45 patients, who underwent anterior cruciate ligament reconstruction. Patients were assigned into Hamstring group and the Peroneus longus group. Functional outcome was assessed using Lysholm score and Modified Cincinnati scores for the knee joint and American Orthopedics Foot and Ankle Scoring for ankle joint. Donor site morbidity was assessed by measuring flexion and extension strength of the knee and plantar flexion and eversion strength of the ankle by handheld dynamometer preoperatively and postoperatively at 6 months and 1 year follow up. Results: Functional outcome of the knee showed significant improvement in peroneus longus group (p-value 0.002) compared to hamstring group. Even though there was minimal reduction in functional outcome of the ankle at 6 months follow-up in peroneus longus group, it improved at one year follow-up. While assessing the donor site morbidity at the knee joint, knee flexion strength showed improvement in the group (p-value 0.02) but reduced in the hamstring group where the hamstring tendon was harvested. Knee extension strength in the hamstring group scored marginally better than the peroneus longus group, which was not statistically significant (p-value 0.5). Conclusion: Autologous peroneus longus tendon can be used as a graft of choice in anterior cruciate ligament reconstruction which showed promising results without compromising on the ankle function. Its usage as an alternative source of the graft may be more useful in multi-ligament injuries of the knee joint. [ABSTRACT FROM AUTHOR]

Andrographis paniculata Nees is an important medicinal plant found in the tropical regions of the world, which has been traditionally used in Indian and Chinese medicinal systems. It is also used as medicinal food. A. paniculata is found to exhibit anti-inflammatory activities; however, its inhibitory potential on inflammatory Group IIA phospholipases A2 (PLA2) and its associated inflammatory reactions are not clearly understood. The aim of the present study is to evaluate the inhibitory/neutralizing potential of ethanolic extract of A. paniculata on the isolated inflammatory PLA2 (VRV-PL-VIIIa) from Daboii rusellii pulchella (belonging to Group IIA inflammatory secretory PLA2 [sPLA2]) and its associated edema-induced activities in Swiss albino mice. A. paniculata extract dose dependently inhibited the Group IIA sPLA2 enzymatic activity with an IC50 value of 10.3 ± 0.5 μg/ml. Further, the extract dose dependently inhibited the edema formation, when co-injected with enzyme indicating that a strong correlation exists between lipolytic and pro-inflammatory activities of the enzyme. In conclusion, results of this study shows that the ethanolic extract of A. paniculata effectively inhibits Group IIA sPLA2 and its associated inflammatory activities, which substantiate its anti-inflammatory properties. The results of the present study warranted further studies to develop bioactive compound (s) in ethanolic extract of A. paniculata as potent therapeutic agent (s) for inflammatory diseases. [ABSTRACT FROM AUTHOR]

The formation of Fe3O4 nanoparticles by hydrothermal process has been studied. X-ray Diffraction measurements were carried out to distinguish between the phases formed during the synthesis. Using the synthesized Fe3O4 nanoparticles, poly(vinyledene fluoride)-Fe3O4 composite films were prepared by spin coating method. Scanning electron microscopy of the composite films showed the presence of Fe3O4 nanoparticles in the form of aggregates on the surface and inside of the porous polymer matrix. Differential Scanning calorimetry revealed that the crystallinity of PVDF decreased with the addition of Fe3O4. The conductitivity of the composite films was strongly influenced by the Fe3O4 content; conductivity increased with increase in Fe3O4 content. Vibration sample magnetometry results revealed the ferromagnetic behavior of the synthesized iron oxide nanoparticles with a Ms value of 74.50 emu/g. Also the presence of Fe3O4 nanoparticles rendered the composite films magnetic. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 [ABSTRACT FROM AUTHOR]

The Sampar Coalfield in Northeastern India is a source of plentiful coal reserves, which are burnt for energy production and industrial applications, resulting in the release of pollutants such as sulphur , arsenic, and lead, which are hazardous to the environment and public health. In this work, samples from the Sampar coalfield have been analyzed to understand the origin, distribution, and various forms of sulphur and their ability to detect toxic heavy metals. The total sulphur concentration ranged from 4.31% to 6%, with organic sulphur being the predominant form at 69.21%, followed by pyritic sulphur at 16.49% and sulphate sulphur at 14.28%. With high sulphur content, this coal indicates a marine influence in the peat-forming swamps. The samples have also been examined for petrographic and elemental analysis, which have revealed the presence of vitrinite, liptinite, inertinite, carbon, hydrogen, nitrogen, oxygen, and mineral matter. In addition, the same coal sample has also been used for electrochemical sensing-based detection of toxic heavy metals like arsenic and lead, and the findings indicate an improved efficacy. These results are expected to have significant implications in the development of effective bio-based remediation strategies in the region to mitigate the harmful effects of coal-related pollution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Coal and coal-based products (by-products), along with other fossil fuels should be used with caution because of their impact on human health and the global climate. In the light of the environmental impact these fossil fuels cause, it's essential to understand the elemental configuration of coal-derived samples and their impact on the ecosystem. Some reports in past have described, geochemical and mineralogical physiognomies of fly-ash and their impact on the environment. However, a comprehensive investigation of various aspects of fly ash like geochemistry, mineralogy, morphology, and toxicological effects has been very sparse and the present study reports the above aspects. The ICP-OES studies confirm the presence of various elements (Al, Ca, Fe, Mg, Na, P, S, Si, and Ti) in the samples. The XRD analysis exposed the presence of minerals like Quartz, H-Hematite, Anatase, Muscovite, and Rutile, in addition to the various phases such as amorphous and crystalline in the fly-ash. Specific samples also possessed Ilmenite which is uncommon in many other samples. Chromium and lead, the well-known heavy metals to cause soil and water pollution in the neighbourhood were found to be existing in higher concentrations in the fly-ash samples, whereas cadmium was found to be the least among the toxic elements found in the samples. The samples were subjected to FE-SEM analysis, which reveals the presence of irregularly shaped minerals and unburnt carbon known to reduce the burning efficiency of coal, especially in power plants. Toxicology studies reported in the work suggested that fly-ash is toxic to the environment at higher concentrations than at lower concentrations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Removal of the hazardous and endocrine-disrupting 2,4-dichlorophenol (2,4-DCP) from water bodies is crucial to maintain the sanctity of the ecosystem. As a low bandgap material (1.37 eV), NaBiS 2 was hydrothermally prepared and used as a potential photocatalyst to degrade 2,4-DCP under visible light irradiation. NaBiS 2 appeared to be highly stable and remained structurally undeterred despite thermal variations. With a surface area of 6.69 m 2 /g, NaBiS 2 has enough surface-active sites to adsorb the reactive molecules and exhibit a significant photocatalytic activity. In alkaline pH, the adsorption of 2,4-DCP on NaBiS 2 appeared to decrease whereas, the acidic and neutral environments favoured the degradation. An increase in the photocatalyst dosage enhanced the degradation efficiency from 81 to 86 %, because of higher vacant adsorbent sites and the electrostatic attraction between NaBiS 2 and 2,4-DCP. The dominant scavengers degraded 2,4-DCP by forming a coordination bond between chlorine's lone pair of electrons and the vacant orbitals of bismuth, following the order hole> OH > singlet oxygen. Being non-toxic to both natural and aquatic systems, NaBiS 2 exhibits antifungal properties at higher concentrations. Finally, the electron-rich NaBiS 2 is an excellent electrocatalyst that effectively degrades organic pollutants and is a promising material for industrial and environmental applications., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The dysfunctioning of β-cells caused by the unspecific misfolding of the human islet amyloid polypeptide (hIAPP) at the membrane results in type 2 diabetes mellitus. Here, we report for the first time, the early-stage interaction of hIAPP oligomers on the DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) lipid membrane using electrochemical parameters. Electrochemical techniques are better than other techniques to detect hIAPP at significantly lower concentrations. The surface level interactions between the peptide (hIAPP) and lipid membrane (DMPC) were investigated using atomic force microscopy (AFM), confocal microscopy (CM) and electrochemical techniques such as Tafel polarization, cyclic voltammetry (CV), differential pulse voltammetry (DPV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Inserting IAPP into the fluid domains results in breaking the lipid-to-lipid interaction, leading to restriction of membrane mobility. The S Lateral values of the liposome and IAPP co-solubilized liposome indicates the cooperative insertion of IAPP. Further, a new method of immobilizing a membrane to the gold surface has been employed, resulting in an electrical contact with the buffer, preventing the direct utilization of a steady-state voltage across the bilayer. The electrochemical studies revealed that the charge transfer resistance decreased for 3-mercaptopropanoic acid modified gold (MPA-Au) electrode coated with the liposome and after the addition of IAPP, followed by an increase in the capacitance. The present study has opened up new dimensions to the understanding of peptide-membrane interactions and shows different experimental approaches for the future researchers in this domain., (Copyright © 2021. Published by Elsevier Masson SAS.)

The persistence of hollow centre in the carbon obtained from milkweed floss provides exceptional sorption characteristics, not seen in common biomasses or their derivatives. A considerably high sorption of 320mg of lead per gram of milkweed carbon was achieved without any chemical modification to the biomass. In this research, we have carbonized milkweed floss and used the carbon as a sorbent for lead in waste water. A high surface area of 170m 2 g -1 and pore volume of 1.07cm 3 g -1 was seen in the carbon. Almost complete removal (>99% efficiency) of lead could be achieved within 5min when the concentration of lead in the solution was 100ppm, close to that prevailing in industrial waste water. SEM images showed that the carbon was hollow and confocal images confirmed that the sorbate could penetrate inside the hollow tube., (Copyright © 2017 Elsevier Ltd. All rights reserved.)