Search

Power generation and wastewater treatment are two great challenges for sustainable development. Microbial fuel cells (MFCs) are a sustainable alternative that can generate bioelectricity in the bioremediation process of wastewater. For this reason, the objective of this research was to generate bioelectricity through double-chamber microbial-combustion cell systems from wastewater from the Covicorti Wastewater Treatment Plant (PTARC) in the anodic chamber and electrogenic bacteria such as Stenotrophomonas maltophilia, Acinetobacter bereziniae, and Achromobacteria xylosoxidans in the cathode chamber, respectively. Measurements of the voltage, current, power density, current density, and optical density of the bacteria and biochemical oxygen demand (BOD) were made. In addition, a metagenomic analysis of the wastewater sample was performed. It was shown that the MFC with A. xylosoxidans generated the highest voltage peak (1.01 ± 0.06 V) on day 24, while the MFC with S. maltophilia generated the highest current value (0.71 ± 0.02 mA). The pH levels were slightly alkaline, and the maximum anodic conductivity value was presented by the MFC with A. cerevisiae, with a peak value of 81 ± 2 mS/cm on day 24. On the other hand, a maximum power density and current density of 195,493 ± 4717 mW/m2 and 4987 A/cm2, respectively, were obtained in the MFC with A. xylosoxidans. Finally, the metagenomic analysis identified the predominant phyla of Proteobacteria present in wastewater samples capable of generating electrical energy as Bacillota, Pseudomonadota, Bacteroidota, Actinomyketone, and Campylobacterota.

This research used tomato waste as a substrate (fuel) in Single Chamber-Microbial Fuel Cells (scMFC) on a small scale. The electrochemical properties were monitored, the functional groups of the substrate were analyzed by Fourier Transform Infrared Spectrophotometry (FTIR) and a microbiological analysis was performed on the electrodes in order to identify the microorganisms responsible for the electrochemical process. The results show voltage peaks and an electrical current of 3.647 ± 0.157 mA and 0.957 ± 0.246 V. A pH of 5.32 ± 0.26 was measured in the substrate with an electrical current conductivity of 148,701 ± 5849 mS/cm and an internal resistance (Rint) of 77. 517 ± 8.541 Ω. The maximum power density (PD) displayed was 264.72 ± 3.54 mW/cm2 at a current density (CD) of 4.388 A/cm2. On the other hand, the FTIR spectrum showed a more intense decrease in its peaks, with the compound belonging to the phenolic groups being the most affected at 3361 cm−1. The micrographs show the formation of a porous biofilm where molecular identification allowed the identification of two bacteria (Proteus vulgaris and Proteus vulgaris) and a yeast (Yarrowia lipolytica) with 100% identity. The data found show the potential of this waste as a source of fuel for the generation of an electric current in a sustainable and environmentally friendly way, generating in the near future a mechanism for the reuse of waste in a beneficial way for farmers, communities and agro-industrial companies.

A large amount of fruit waste is being a great environmental and social problem due to a lack of adequate storage. Among the most abundant waste is papaya, due to its high consumption in various varieties. These wastes can generate bioelectricity through organic waste, being an important parameter the pH. In this research, low-cost laboratory-scale microbial fuel cells were fabricated, using papaya waste as fuel at different pH (4, 5.73, 7, and 9) to obtain the optimum operating pH. It was possible to observe the maximum values ​​of electric current and voltage of 17.97 mA and 1.02 V on days 16 and 14, in the cell with pH 7; while the cell with pH was the one that showed the lowest values. The electrical conductivity values ​​increased from the first day, observing a maximum peak of 172.50 mS/cm for the cell with pH 7. However, the internal resistance values ​​were low, the maximum value being for the cell with pH 4 (234.61 ± 34 Ω) and the minimum for the cell with pH 7 (46.543 ± 3.6 Ω). In the same way, the maximum power density was for the cell with pH 7 of approximately 645.74 ± 33.64 mW/cm2 and a current density of 5.42 A/cm2.

Potential use of organic waste and microalgae generates bioelectricity and thereby reduces harmful effects on the environment. These residues are used due to their high content of electron-generating microorganisms. However, so far, they have not been used simultaneously. Therefore, this research uses mango waste and microalgae Spirulina sp. in double-chamber microbial fuel cells to generate bioelectricity. The cells were made at a laboratory scale using zinc and copper electrodes, achieving a maximum current and voltage of 7.5948 ± 0.3109 mA and 0.84546 ± 0.314 V, with maximum electrical conductivity of the substrate being 157.712 ± 4.56 mS/cm and an optimum operating pH being 5.016 ± 0.086. The cells showed a low internal resistance of approximately 205.056 ± 25 Ω, and a maximum power density of 657.958 ± 21.114 mW/cm2 at a current density of 4.484 A/cm2. This research provides an excellent opportunity for mango farmers and exporting and importing companies because they can use their own waste to reduce their electricity costs when this prototype is brought to a large scale.

Agricultural waste negatively impacts the environment and generates economic difficulties for agro-industrial companies and farmers. As a result, it is necessary for an eco-friendly and sustainable alternative to managing this type of waste. Therefore, the research aimed to investigate lettuce waste as an alternative substrate to generate bioelectricity in single-chamber microbial fuel cells (scMFCs). It was possible to report voltage and electric current peaks of 0.959 ± 0.026 V and 5.697 ± 0.065 mA on the fourteenth day, values that were attained with an optimum pH of 7.867 ± 0.147 and with an electrical conductivity of 118.964 ± 8.888 mS/cm. Moreover, as time passed the values began to decline slowly. The calculated value of maximum power density was 378.145 ± 5.417 mW/cm2 whose current density was 5.965 A/cm2, while the internal resistance reported using Ohm’s Law was 87.594 ± 6.226 Ω. Finally, it was possible to identify the Stenotrophomonas maltophilia bacterium (99.59%) on a molecular scale, as one of the microorganisms present in the anodic biofilm. The three microbial fuel cells were connected in series and demonstrated that they were capable of lighting an LED bulb, with a voltage of 2.18 V.

Antibiotics are often prescribed to treat infections caused by group B Streptococcus; however, inappropriate use of antibiotics can develop resistance. Because of this, the research was carried out with the aim of evaluating the in vitro effect of the hydroalcoholic extract of Caesalpinia spinosa (Molina) Kuntze known as Taya or Tara on the viability of β-hemolytic streptococci; an experimental investigation of increasing stimulation was carried out. The hydroalcoholic extract of C. spinosa pods was worked in concentrations of 250, 500, 750, and 1000 mg/mL, which were placed on filter paper discs to perform the sensitivity test following the Kirby–Bauer method. The greatest inhibition of bacterial viability was observed in the penicillin control group (GPT-01) followed by the TCT-04 group (hydroalcoholic Tara extract 1000 mg/mL). In addition, it was found that these groups are statistically different from the rest (p < 0.05), while the lowest bacterial inhibition was obtained for the erythromycin group and the TCT-01 group (250–1000 mg/mL). It was concluded that the hydroalcoholic extract of the pods of C. spinosa (Molina) Kuntze affects the viability of β-hemolytic streptococci associated with strep pharyngitis and that this antimicrobial activity is due to the presence of tannins, steroidal flavonoid, and alkaloids. Likewise, the tested concentrations of hydroalcoholic Tara extract were found to have better antibacterial activity than erythromycin (15 µg/mL) against β-hemolytic streptococci. These results are hopeful for the traditional or herbal medicine field. However, future in vivo research is needed to determine its effectiveness in humans.

Biodiversity in ecosystems is threatened by plastic waste, a significant pollution problem. The research aims to use plastic, Pleorotus ostreatus mycelium, and sugarcane bagasse to develop an eco-friendly biomaterial. The preparation consisted of three phases: (1) Treatment of the underlying layer, (2) inoculation of the fungus (three different concentrations: 15%, M1; 20%, M2; and 25%, M3), and (3) dehydration of the biomaterial. The physical characterization results (density, water absorption, and texture) showed that the average density varies between 127.86 and 131.19 kg/m3; also, the M1 sample had a high percentage of water absorption (23.55%), while M2 obtained lower percentages (11.79%). In the bending test, samples M2 and M3 showed higher structural resistance with stress values of 0.682 and 0.68 MPa, respectively. Based on the results, the produced biomaterials may serve as an alternative to expanded polystyrene (EPS). Due to their moldable characteristics, they can be used in non-structural construction, packaging, and various architectural applications. The research provided promising results; however, additional parameters must be evaluated to be able to commercialize them.

In this study, we aimed to determine the in vitro activity of Leuconostoc mesenteroides var. mesenteroides isolated from sugar-industry effluents to produce a dextran bioflocculant from sucrose as a low-cost substrate. L. mesenteroides strains present in residual cane juice from a sugar factory were isolated and biochemically identified using Mayeux, Sandine, and Elliker agar (MSE) as a selective medium. The strain number 3 (LM03) was biochemically identified as L. mesenteroides var. mesenteroides, which was used for this study. The concentration of dextran was quantified by dry weight, the morphology and purity were evaluated using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). Flocculation was evaluated via turbidimetric assays in different pH ranges from sugar-industry effluents and doses of dextran. To evaluate the flocculant activity according to the effect of pH, a jar test kit from Phipps and Bird, USA, was used with the sample recollected from the effluent (sugar industry). The pH of the samples was adjusted to 7, 8, 9, 10 and 11, with a dose of 40 ppm (dextran dose) at a fast and slow speed of 150 and 50 rpm, respectively. To evaluate the influence of the dose of dextran, values of 5, 20 and 40 ppm were used with fast speeds of 180–150 rpm and slow speeds of 30–50 rpm, respectively. The strain (LM03) was able to produce the highest concentration of dextran (26.87 g/L) in 76 h of incubation. The presence of dextran was identified in the MSE agar after incubation and characterized by FTIR, SEM, and EDS. Besides that, we observed that the best flocculation activity was observed at a pH of 9 and a concentration of 40 ppm of dextran, with a fast agitation speed of 150 rpm for 5 min and a slow agitation speed of 50 rpm for 15 min, achieving 77.7% removal of turbidity from the sugar factory effluent. L. mesenteroides was responsible for the bioflocculation of dextran in different sugar-industry effluents.

The large amount of molasses that are generated in sugar-processing companies are not always redistributed for commercialization in by-products. Because of this, the present research uses these wastes as fuel in low-cost, lab-scale, single-chamber microbial fuel cells. Zinc and copper electrodes were used as electrodes and 100 mL of molasse in the chamber as fuel, managing to generate current and voltage peaks of 1.73 ± 0.13 mA and 0.953 ± 0.142 V. In monitoring the conductivity of the substrate, a maximum peak of 111.156 ± 8.45 mS/cm was observed, and a slightly acidic pH was observed throughout the monitoring. It was possible to obtain a power density of 5.45 ± 0.31 W/cm2 for a current density of 308.06 mA/cm2, while the yeast count showed a logarithmic curve throughout the monitoring. Finally, the molecular technique identified 100% of the special C. boidinii present in the anodic electrode. This research will give great benefits to sugar companies because they will be able to generate electricity using the molasses that cannot generate by-products.

The effluents generated by the tannery industry have a high content of chromium and other toxic elements, representing a potential threat to ecosystems. An eco-friendly alternative to treat these effluents is the use of microorganisms, such as fungi, with the capacity to biosorb heavy metals. The present work aims to determine the effect of the molasses concentration, pH variation, and time on the removal of total chromium using the filamentous fungus Trichoderma spp. An experimental design was adopted using pH (4 and 6), concentrations of molasses (0.5 and 1%), and time (8 and 12 days) as independent variables. The Trichoderma inoculum was constant in all the treatments. The different treatments were evaluated after 0, 8, and 12 days by taking 50 mL of sample from each bioreactor. The chromium concentration was subsequently determined in each sample. The results show that treatment 3 (1% molasses and pH 4) showed higher chromium removal after both 8 and 12 days. The concentrations of total chromium decreased from 665 mg/mL to values of 568 mg/mL by day 8 and 486 mg/mL by day 12. These values are, however, still above the maximum threshold imposed by Peruvian law regarding the discharge of non-domestic effluents into the sewage system. The results show that Trichoderma spp. can increasingly remove chromium from the effluent with longer incubation periods. However, future studies are necessary to determine the mechanisms of chromium biosorption by the fungus and the influence of other physicochemical parameters.

Pollution generated by the misuse of large amounts of fruit and vegetable waste has become a major environmental and social problem for developing countries due to the absence of specialized collection centers for this type of waste. This research aims to generate electricity in an eco-friendly way using red dragon fruit (pitahaya) waste as the fuel in single-chamber microbial fuel cells on a laboratory scale using zinc and copper electrodes. It was possible to generate voltage and current peaks of 0.46 ± 0.03 V and 2.86 ± 0.07 mA, respectively, with an optimum operating pH of 4.22 ± 0.09 and an electrical conductivity of 175.86 ± 4.72 mS/cm at 8 °Brix until the tenth day of monitoring. An internal resistance of 75.58 ± 5.89 Ω was also calculated with a maximum power density of 304.33 ± 16.51 mW/cm2 at a current density of 5.06 A/cm2, while the FTIR spectra showed a decrease in the initial compounds and endings, especially at the 3331 cm−1 peaks of the O–H bonds. Finally, the yeast-like fungus Geotrichum candidum was molecularly identified (99.59%). This research will provide great opportunities for the generation of renewable energy using biomass as fuel through electronic devices with great potential to generate electricity.

In this study, an alternative method is proposed for producing electricity using microbial fuel cells (MFCs) and fruit waste in case of industries and farmers. Herein, MFCs were manufactured using zinc and copper electrodes and three types of organic waste (R. ulmifolius, H. undatus, and M. citrifolia) as the substrate. The results revealed that the H. undatus waste generated the highest voltage and current values, i.e., 1.17 ± 0.12 V and 25.78 ± 0.89 mA, respectively, in an open circuit. However, all the substrates exhibited acidic pH values. The H. undatus substrate reported the highest voltage, power density (PD), and current density (CD) values at a V max value of 1.11 ± 0.25 V, a PD max value of 0.0719 ± 0.0012 W/cm2, and a CD max value of 0.051 A/cm2. Conversely, the R. ulmifolius substrate exhibited the lowest values at a V max value of 0.96 ± 0.13 V, a PD max value of 0.0668 ± 0.0013 W/cm2, and a CD max value of 0.025 A/cm2. The micrographs denote that the Cu anode porosity of H. undatus is higher when compared with those of the remaining two substrates, and the Pichia guilliermondii, Candida boidinii, and Brevibacillus laterosporus microorganisms were observed in its anodic biofilm.

The enormous environmental problems that arise from organic waste have increased due to the significant population increase worldwide. Microbial fuel cells provide a novel solution for the use of waste as fuel for electricity generation. In this investigation, onion waste was used, and managed to generate maximum peaks of 4.459 ± 0.0608 mA and 0.991 ± 0.02 V of current and voltage, respectively. The conductivity values increased rapidly to 179,987 ± 2859 mS/cm, while the optimal pH in which the most significant current was generated was 6968 ± 0.286, and the ° Brix values decreased rapidly due to the degradation of organic matter. The microbial fuel cells showed a low internal resistance (154,389 ± 5228 Ω), with a power density of 595.69 ± 15.05 mW/cm2 at a current density of 6.02 A/cm2; these values are higher than those reported by other authors in the literature. The diffractogram spectra of the onion debris from FTIR show a decrease in the most intense peaks, compared to the initial ones with the final ones. It was possible to identify the species Pseudomona eruginosa, Acinetobacter bereziniae, Stenotrophomonas maltophilia, and Yarrowia lipolytica adhered to the anode electrode at the end of the monitoring using the molecular technique.

Papaya (Carica papaya) waste cause significant commercial and environmental damage, mainly due to the economic losses and foul odours they emit when decomposing. Therefore, this work provides an innovative way to generate electricity for the benefit of society and companies dedicated to the import and export of this fruit. Microbial fuel cells are a technology that allows electricity generation. These cells were produced with low-cost materials using zinc and copper electrodes, while a 150 mL polymethylmethacrylate tube was used as a substrate collection chamber (papaya waste). Maximum values of 0.736 ± 0.204 V and 5.57 ± 0.45 mA were generated, while pH values increased from 3.848 to 8.227 ± 0.35 and Brix decreased slowly from the first day. The maximum power density value was 878.38 mW/cm2 at a current density of 7.245 A/cm2 at a maximum voltage of 1072.77 mV. The bacteria were identified with an identity percentage of 99.32% for Achromobacter xylosoxidans species, 99.93% for Acinetobacter bereziniae, and 100.00% for Stenotrophomonas maltophilia. This research gives a new way for the use of papaya waste for bioelectricity generation.

The objective was to determine the effect of inoculum concentration on the degradation of Diesel 2 by a microbial consortium called BIOT.PD001. For this, five systems were designed (in triplicate), which Contained Davis Minimum Medium, 5% Diesel 2 as a carbon source, and a suspension of the microbial consortium BIOT.PD001 (9 × 108 cells/mL) in concentrations of 2, 4, 6, 8, and 10% of the final volume. The monitoring of the degradation of Diesel 2 was carried out indirectly through the bacterial counts by the plate count method, the Biochemical Oxygen Demand (BOD5) by the Winkler Method modified according to Alsterberg, and the concentration of total fats by Gerber’s method. The retention time was 15 days. It was observed that the percentage of efficiency of the process increases as the concentration of inoculum increases, obtaining the highest percentage of efficiency (94.77%) when using 10% of inoculum (v/v), while when using inoculum concentrations of 2 and 4% (v/v), the efficiency percentages are the lowest, (68.4 and 66.6%, respectively). On the other hand, the variance analysis indicated that there is a significant difference between the averages of these values. The regression analysis indicated that the inoculum concentration significantly affects the efficiency of Diesel 2 degradation and that this is 86% explained by a linear regression model. There is a linear relationship between the inoculum concentration of the BIOT.PD001 microbial consortium and the BOD5 tend to decrease as a function of time. It is concluded that the inoculum concentration significantly affects the efficiency of the degradation of Diesel 2 by the BIOT.PD001 consortium.

Global warming and the increase in organic waste from agro-industries create a major problem for the environment. In this sense, microbial fuel cells (MFC) have great potential for the generation of bioelectricity by using organic waste as fuel. This research produced low-cost MFC by using zinc and copper electrodes and taking blueberry waste as fuel. A peak current and voltage of 1.130 ± 0.018 mA and 1.127 ± 0.096 V, respectively, were generated. The pH levels were acid, with peak conductivity values of 233. 94 ± 0.345 mS/cm and the degrees Brix were descending from the first day. The maximum power density was 3.155 ± 0.24 W/cm2 at 374.4 mA/cm2 current density, and Cándida boidinii was identified by means of molecular biology and bioinformatics techniques. This research gives a new way to generate electricity with this type of waste, generating added value for the companies in this area and helping to reduce global warming.

Introduction The Broselow tape (BT) is a useful pediatric tool for weight estimation and dosing reference during emergency care. Many accuracy studies have been performed for various countries and regions of the world but there is very little information for Latin American countries. The primary objective of the study was to assess the accuracy of the BT in a Peruvian pediatric population. Methods This was a retrospective cross-sectional study of 1,160 children aged two to 19 years from three outpatient clinics in La Libertad, Lima, and Iquitos, Peru. Patient height and weight were measured and compared with the weight and color zone generated by the 2017 edition of the BT. Accuracy was estimated by statistical comparison of mean absolute percent differences, error within 10% (EW10), and color zone agreement. Results Comparison of mean differences between measured weight (MW) and estimated BT weight shows that the BT underestimates actual weight for all color zones in this population. Likewise, the Bland-Altman plot of agreement between estimated and measured weights shows an overall underestimation, or bias, equal to 1.60 kg. The overall percent difference was -7.84% with differences gradually increasing for weights over 10 kg. In terms of accuracy, the overall error within 10% was 62.8%. Conclusion The BT underestimates the actual weight of Peruvian pediatric patients in all color categories, particularly in children with higher body mass indexes. Underestimation of weight may lead to the use of non-therapeutic medication doses or incorrect equipment sizes and, subsequently, ineffective resuscitation.

Resumen Introducción. En la tuberculosis multirresistente, el abandono del tratamiento constituye un grave problema de salud pública que afecta la calidad de vida de los pacientes, sus familias y la comunidad. El enfrentarlo supone una carga para los sistemas sanitarios debido a que provoca fuentes de transmisión libre en la comunidad e incrementa la prevalencia y la mortalidad. De ahí, la necesidad de investigar los factores asociados con esta situación. Objetivo. Determinar los factores de riesgo asociados con el abandono del tratamiento en pacientes con tuberculosis multirresistente en la región de Callao (Perú). Materiales y métodos. Se hizo un estudio analítico de casos y controles (80 casos y 180 controles) en tratamiento entre el 1° enero del 2010 y el 31 diciembre del 2012. Los factores se determinaron mediante regresión logística, y se calcularon los odds ratios (OR) y los intervalos de confianza (IC) del 95 %. Resultados. En el análisis multivariado se determinaron los siguientes factores de riesgo: no tener conocimiento de la enfermedad (OR=23,10; IC95%: 3,6-36,79; p=0,002); no creer en la curación (OR=117,34; IC95%: 13,57-124,6; p=0,000); no tener apoyo social (OR=19,16; IC95%: 1,32-27,77; p=0,030); no considerar adecuado el horario de atención (OR=78,13; IC95%: 4,84-125,97; p=0,002), y no recibir los resultados de laboratorio (OR=46,13; IC95%: 2,85-74,77; p=0,007). Conclusión. Los servicios de salud deben esforzarse en la determinación precoz de las condiciones que podrían convertirse en factores de riesgo, lo cual ayudaría a implementar preventivamente intervenciones efectivas, rápidas y de alto impacto. Abstract Introduction: In the context of multidrug-resistant tuberculosis, abandonment of therapy represents a serious public health problem that affects the quality of life of patients, families, and communities. Managing this phenomenon places a burden on health systems since it causes free sources of transmission in the community, thereby increasing prevalence and mortality. Thus, there is a need to study factors associated with this problem. Objective: This study sought to identify risk factors associated with the abandonment of therapy by patients with multidrug-resistant tuberculosis in the Peruvian region of Callao. Materials and methods: We conducted an analytical case-control study (cases=80; controls=180) in patients under treatment from January 1st, 2010, to December 31, 2012. Risk factors were identified using logistic regression; odds ratios (OR) and 95% confidence intervals (CI) were calculated. Results: The multivariate analysis identified the following risk factors: Being unaware of the disease (OR=23.10; 95% CI 3.6-36.79; p=0.002); not believing in healing (OR=117.34; 95% CI 13.57-124.6; p=0.000); not having social support (OR=19.16; 95% CI 1.32-27.77; p=0.030); considering the hours of attention to be inadequate (OR=78.13; 95% CI 4.84-125.97; p=0.002), and not receiving laboratory reports (OR=46.13; 95% CI 2.85-74.77; p=0.007). Conclusion: Health services must focus on the early detection of conditions that may represent risk factors to proactively implement effective, rapid and high-impact interventions.

The large amounts of organic waste thrown into the garbage without any productivity, and the increase in the demand for electrical energy worldwide, has led to the search for new eco-friendly ways of generating electricity. Because of this, microbial fuel cells have begun to be used as a technology to generate bioelectricity. The main objective of this research was to generate bioelectricity through banana waste using a low-cost laboratory-scale method, achieving the generation of maximum currents and voltages of 3.71667 ± 0.05304 mA and 1.01 ± 0.017 V, with an optimal pH of 4.023 ± 0.064 and a maximum electrical conductivity of the substrate of 182.333 ± 3.51 µS/cm. The FTIR spectra of the initial and final substrate show a decrease in the peaks belonging to phenolic compounds, alkanes, and alkenes, mainly. The maximum power density was 5736.112 ± 12.62 mW/cm2 at a current density of 6.501 A/cm2 with a peak voltage of 1006.95 mV. The molecular analysis of the biofilm formed on the anode electrode identified the species Pseudomonas aeruginosa (100%), and Paenalcaligenes suwonensis (99.09%), Klebsiella oxytoca (99.39%) and Raoultella terrigena (99.8%), as the main electricity generators for this type of substrate. This research gives a second use to the fruit with benefits for farmers and companies dedicated to exporting and importing because they can reduce their expenses by using their own waste.

Objective. This correlational descriptive cross-sectional study was conducted to determine the level of knowledge and its relationship with attitudes and Zika’s preventive practices in the district of Chepen, La Libertad, Peru, 2017. Materials and methods. A questionnaire on knowledge, attitudes and preventive practices was applied to a sample of 284 adult persons, with an average age of 37 years. Results. The results showed that the level of general knowledge about zika was regular at 79% and good at 21%. As for the most common zika’s preventive practices carried out by the inhabitants of Chepén, 83% mentioned that they frequently washed their water tanks, 77% used a brush and detergent to wash the tanks with water and 75% placed a lid over the tanks with water. Conclusions. There is a significant relationship between level of knowledge and sika’s preventive practices (p0.05)., Objetivo. Este estudio descriptivo correlacional de corte transversal; se realizó para determinar el nivel de conocimientos y su relación con las actitudes y prácticas preventivas del Zika en el distrito de Chepen - La Libertad Perú. 2017. Materiales y métodos. Se aplicó un cuestionario sobre conocimiento, actitudes y prácticas preventivas en una muestra de 284 personas adultas, con una edad promedio de 37 años. Resultados. Los resultados demuestran que el nivel de conocimiento general sobre zika fue regular en un 79% y bueno en un 21%. En cuanto a las prácticas preventivas de zika más comunes que realizan los habitantes de Chepén, un 83% mencionan que lavan frecuentemente los depósitos de agua, 77% usan cepillo y detergente para lavar los depósitos con agua y 75% coloca una tapa sobre los depósitos con agua. Conclusiones. El nivel de conocimiento tiene una relación significativa con las practicas preventivas del zika (p0.05).

Introduction: Essential oils are complex substances used widely extended in the form of aromatherapy or phytotherapy, some of them as agents to relieve anxiety and stress. In this sense this study was conducted to examine the anxiolytic-like effect of Luma chequen essential oil. Methods: The essential oil was extracted by steam distillation and the chemical composition was investigated by Gas chromatography with flame-ionization detection (GC-FID) and Gas chromatography-mass spectrometry (GC–MS). Moreover, a randomized, double blind, placebo-controlled trial was conducted, where 48 participants were divided into two groups, comprising a control group (CG) treated with placebo, and an experimental group (EG) treated with aromatherapy based on Luma chequen essential oil. The anxiety index was evaluated by State-Trait Anxiety Inventory (STAI). Measures were taken at two times: pretest and posttest. Results: The chemical analysis showed that α-pinene was the main component (56.5%). State and Trait anxiety scores showed a decrease in posttest study phase in comparison with pretest in experimental group compared to placebo (p

This paper focuses on using lime, orange, and tangerine waste as fuel for the generation of bioelectricity. The tangerine microbial fuel cell evidenced a maximum voltage peak of 1.1 V on day 13, while displaying abrupt voltage losses on the following days and throughout the remaining period of substrate monitoring. On the other hand, orange-based fuel denotes lower current generation during these 28 days with values close to 1.6 mA and 0.25 mA on the first and last day, respectively. Still, orange generated 3.5 mA on the first day with values sharply declining in the following days until reaching 0.91 mA on the last day. In general, substrate volumes in the microbial fuel cells diminished over time, which is consistent with the voltage and current values reported. In addition, pH values increased from day 1 for all substrates, reaching acidic pH values on the last day of measurement due to the consumption of carbon sources. Tangerine reported the highest current density (CD) at 72 mW/cm2 and a maximum voltage of 1.06 volts, while orange generated a CD of 62.5 mW/cm2 and 0.94 volts.

La enfermedad de Kawasaki (EK) es una vasculitis sistemica febril aguda, autolimitada que afecta principalmente a ninos. La investigacion fue un estudio descriptivo, transversal y retrospectivo. Como objeto de estudio se asumieron a pacientes pediatricos hospitalizados por enfermedad de Kawasaki en el hospital Belen de Trujillo durante el periodo enero 2007- agosto 2016. La menor edad en la que se diagnostico la EK fue 10 meses y la mayor fue 5 anos con 8 meses, con un promedio de 2,6 anos. Los resultados de examenes de laboratorio pueden encontrarse alteraciones en el hemograma, las pruebas de funcion hepatica, el perfil bioquimico. En el examen de sedimento urinario. El 40 % de los pacientes presentaron leucocitosis, el 60 % la proteina “C” reactiva (PCR) elevada, el 60 % la Velocidad de Sedimentacion Globular (VSG) elevadas , 60 % con anemia, 60 % con trombocitosis, 20 % con elevacion de las transaminasas, 20% perfil lipidico alterado e hiperbilirrubinemia, y el 40 % de los pacientes con piuria esteril. Se concluye que la EK tiene una baja incidencia en nuestra poblacion y es propia de pacientes menores de 5 anos y varones. Los principales criterios clinicos encontrados en los casos fueron la fiebre persistente y los cambios en labios y mucosa oral. Los principales hallazgos de laboratorio fueron: anemia, trombocitosis, VSG y PCR elevadas.Palabras clave: enfermedad de Kawasaki, caracteristicas clinico-epidemiologicas.

El presente trabajo es un estudio descriptivo de tipo transversal comparativo con enfoque cuantitativo. La poblacion o universo del estudio estuvo representado por las madres de los ninos menores de 5 anos que acuden al Hospital Belen de Trujillo (HBT) y al Hospital EsSalud I de Florencia de Mora de Trujillo. El objetivo principal fue Identificar habitos, costumbres y cosmovision que favorecen o no la prevalencia de las enfermedades diarreicas agudas. La edad minima de madres fue de 15 anos, y la maxima fue de 56. En el Hospital EsSalud de Florencia de Mora el porcentaje de madres que tenia un maximo de 2 hijos fue del 79,4% contrastando con el HBT donde se obtuvo que un 30,2% de las madres tenian de 3 a mas. Mas de la mitad de madres del Hospital EsSalud Florencia de Mora solo habia estudiado hasta el nivel secundario y un 47,6 % tenia instruccion superior. Las madres entrevistadas en el Hospital EsSalud de Florencia de Mora se obtuvo que el 68,3% de ellas se dedicaba solo al cuidado del hogar, contrastando con el HBT donde solo el 57.1% de las madres se dedicaba a dicha labor. Ademas el HBT, el 54,8% de las madres se dedicaba a algun tipo de trabajo fuera del hogar ya sea este dependiente o independiente, mientras que para el primer establecimiento solo el 31,7% de las madres trabajaba fuera del hogar. En ambos nosocomios predomina un buen nivel de conocimientos frente a la enfermedad diarreica aguda, sin haber diferencias significativas entre ambas. Las actitudes adoptadas frente a la enfermedad diarreica aguda son equiparables en ambos nosocomios con una muy buena actitud en la mayoria de ellas. La mayoria de madres en ambos nosocomios tienen buenas practicas frente a la enfermedad diarreica aguda, no habiendo diferencias significativas entre ambos nosocomios. Palabras clave: Diarrea, conocimientos, actitudes y practicas.

Se realizo un estudio restrospectivo y descriptivo, con el proposito de identificar el perfil epidemiologico de las infecciones nosocomiales en la Unidad de Cuidados Neonatales del Hospital Regional Docente de Trujillo. Se reviso las historias clinicas de 225 recien nacidos con infecciones nosocomiales, atendidos en el Hospital mencionado entre enero del 2008 a diciembre del 2012. Las caracteristicas epidemiologicas en el presente estudio, que se identificaron fueron el sexo masculino, la sepsis fue el sitio de la infeccion, la cateterizacion periferica fue el procedimiento que resalto, el agente infeccioso que se aislo en el hemocultivo fue el Staphylococcus epidermidis, los recien nacidos de 28 a 32 semanas de edad gestacional y de 1001 a 1500 gramos de peso al nacer predominaron en este estudio y la mortalidad se presento en un 33% de los casos. Palabras clave: Infeccion nosocomial, perfil epidemiologico.