Search

Objective: This study aimed to compare the efficacy of acellular xenogeneic dermal matrix graft (AXDM) compared to connective tissue graft (CTG) in treating multiple gingival recessions., Materials and Methods: A systematic search of electronic databases was conducted to identify randomized clinical trials (RCTs) that compared AXDM and CTG. The selected studies were subjected to bias risk assessment, data extraction, and meta-analyses. Parameters such as gingival recession height, width, mean percentage of root coverage, and complete root coverage were analyzed., Results: Seven RCTs involving 146 patients were included. The meta-analyses indicated that CTG was statistically superior to AXDM in reducing gingival recession height at the final follow-up (mean difference: -0.104 mm, 95% confidence interval [CI]: -0.180-0.028, p = 0.008) and width at the final follow-up (mean difference: -0.285 mm, 95% CI: -0.541-0.030, p = 0.029). CTG also demonstrated a significantly higher mean percentage of root coverage at the 6-month follow-up (difference in means: -2.761 mm, 95% CI: -4.932-0.590, p = 0.013) and a higher percentage of complete root coverage at the 6-month follow-up (odds Ratio [OR]: 0.598, 95% CI: 0.4-0.892, p = 0.012) compared to AXDM. However, there was no significant difference in the number of teeth with complete root coverage between CTG and AXDM (OR: 1.610, 95% CI: 0.983-2.636, p = 0.058) and aesthetic outcomes (mean difference: 0.148, 95% CI: -0.277-0.573, p = 0.494)., Conclusions: CTG is more effective than AXDM in treating multiple gingival recessions. This is evidenced by significant reductions in gingival recession height and width, a higher mean percentage of root coverage, and a greater percentage of complete root coverage at the 6-month follow-up., Clinical Relevance: In some clinical situations an alternative to CTG is required for the treatment of multiple gingival recessions. AXDM, despite presenting clinical outcomes that are not as satisfactory as CTG, can be used for this purpose., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The objective of this systematic review was to identify the available scientific evidence on bone substitutes (BSs) compared with autogenous bone grafts (ABGs) for regeneration of horizontal bone resorption in the anterior maxillary alveolar process, aiming at rehabilitation with endosseous implants. This review was performed according to the PRISMA guidelines (2020) and registered in the database PROSPERO (CRD: 42017070574). The databases searched were PUBMED/MEDLINE, EMBASE, SCOPUS, SCIENCE DIRECT, WEB OF SCIENCE, and CENTRAL COCHRANE, in the English language. The Australian National Health and Medical Research Council (NHMRC) and Cochrane Risk of Bias Tool were used to assess the study's quality and risk of bias. A total of 524 papers were found. After the selection process, 6 studies were selected for review. A total of 182 patients were followed for a period of 6 to 48 months. The mean age of patients was 46.46 years, and 152 implants were installed in the anterior region. Two studies achieved a reduced graft and implant failure rate, whereas the remaining 4 studies had no losses. It may be concluded that the use of ABGs and some BSs is a viable alternative for the rehabilitation with implants in individuals with anterior horizontal bone loss. However, additional randomized controlled trials are warranted due to the limited number of papers.

The objective of this study was to perform a quality analysis of systematic reviews with meta-analyses that focused on the comparison of platform-switching (implant-abutment mismatching) and platform-matched (PM) implants. The assessment of multiple systematic reviews (AMSTAR) and Glenny (Checklist) Scales were used to qualify the studies. PubMed, Scientific Electronic Library Online (SciELO), Web of Science (formerly ISI Web of Knowledge), and Cochrane databases were searched, by topic, for systematic reviews on dental implants with switching platforms. A total of 8 systematic reviews, including 7 studies with meta-analyses, were selected. The AMSTAR scale indicated a high (n = 6) to moderate (n = 2) score for the included studies. The quantitative analysis indicated that platform-switching implants preserved more bone tissue when compared with platform-matched implants (6 meta-analyses; P < .001, smaller mean difference: -0.29 mm, 95% CI: -0.38, -0.19 and greater mean difference: -0.49 mm, 95% CI: -0.73, -0.26). Quantitative analysis based on 7 systematic reviews with meta-analysis indicated positive peri-implant bone preservation for implants restored with an implant-abutment mismatching (PSW). Further, there is evidence to improve the design of current systematic reviews. Future systematic reviews in this thematic area should consider searches in gray literature and different databases and include only randomized controlled clinical studies.

The aim of this meta-analysis was to verify the clinical viability of single implant-retained mandibular overdentures (SIMO). An electronic search of the PubMed and Cochrane databases was performed (end date July 2017); this was supplemented by a manual search of the literature. Only prospective clinical trials and randomized controlled trials (RCTs) that evaluated SIMO with a minimum follow-up of 12 months were included. The meta-analysis was based on the Mantel-Haenszel method. Dental implant and prosthetic failure were the dichotomous outcome measures; these were evaluated through the risk ratio (RR) and odds ratio (OR), with corresponding 95% confidence intervals (CI). Of 499 articles identified, nine fulfilled the inclusion criteria. A total of 205 implants were placed in patients with a mean age of 64.1 years; the cumulative survival rate was 96.6% over a mean follow-up period of 37.3 months. The procedure used (SIMO vs. two implant-retained mandibular overdenture) did not affect dental implant failure (P=0.45) or prosthetic failure (P=0.65): RR 1.06 (95% CI 0.91-1.23) and RR 0.88 (95% CI 0.51-1.51), respectively; OR 2.56 (95% CI 0.27-24.39; P=0.41) and OR 0.44 (95% CI 0.15-1.26; P=0.13), respectively. Within the limitations of this systematic review and meta-analysis, SIMO with a complete denture as the opposing arch may be considered an alternative treatment for completely edentulous patients. However, this study also confirmed the need for more RCTs on this topic., (Copyright © 2018 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

The purpose of this study was to perform a systematic review of morphological alterations in the condyles after orthographic surgery involving a sagittal split ramus osteotomy (SSRO), with or without surgery on the maxilla. Searches were performed on three databases and registered in the PROSPERO. The selected studies fulfilled the criteria established by the following PICO model: (1) population: individuals with skeletal dentofacial deformities (class II or III facial patterns), without asymmetry; (2) intervention: orthognathic surgery for mandibular setback using an SSRO, with or without a Le Fort I osteotomy, and fixed with bicortical screws or plates and screws; (3) comparison: orthognathic surgery for mandibular advancement using an SSRO, with or without a Le Fort I osteotomy, and fixed with plates and screws or bicortical screws; and (4) outcome: condylar resorption rate and relapse. Initially, 1,371 articles were identified and 636 articles were screened after elimination of duplicates, and 6 articles were selected for qualitative analysis based on the inclusion and exclusion criteria. Five studies had data regarding the rate of condylar resorption, varying from 0.0% to 4.2%. In conclusion, condylar resorption and relapses were present in a small percentage of patients studied., (Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

The aim of this study was to evaluate the effect of varying the diameter, connection type and loading on stress distribution in the cortical bone for implants with a high crown-implant ratio. Six 3D models were simulated with the InVesalius, Rhinoceros 3D 4.0 and SolidWorks 2011 software programs. Models were composed of bone from the posterior mandibular region; they included an implant of 8.5 mm length, diameter Ø 3.75 mm or Ø 5.00 mm and connection types such as external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Models were processed using the Femap 11.2 and NeiNastran 11.0 programs and by using an axial force of 200 N and oblique force of 100 N. Results were recorded in terms of the maximum principal stress. Oblique loading showed high stress in the cortical bone compared to that shown by axial loading. The results showed that implants with a wide diameter showed more favorable stress distribution in the cortical bone region than regular diameter, regardless of the connection type. Morse taper implants showed better stress distribution compared to other connection types, especially in the oblique loading. Thus, oblique loading showed higher stress concentration in cortical bone tissue when compared with axial loading. Wide diameter implant was favorable for improved stress distribution in the cortical bone region, while Morse taper implants showed lower stress concentration than other connections.

The purpose of this study was to evaluate different retention systems (cement- or screw-retained) and crown designs (non-splinted or splinted) of fixed implant-supported restorations, in terms of stress distributions in implants/components and bone tissue, by 3-dimensional (3D) finite element analysis. Four 3D models were simulated with the InVesalius, Rhinoceros 3D, and SolidWorks programs. Models were made of type III bone from the posterior maxillary area. Models included three 4.0-mm-diameter Morse taper (MT) implants with different lengths, which supported metal-ceramic crowns. Models were processed by the Femap and NeiNastran programs, using an axial force of 400 N and oblique force of 200 N. Results were visualized as the von Mises stress and maximum principal stress (σmax). Under axial loading, there was no difference in the distribution of stress in implants/components between retention systems and splinted crowns; however, in oblique loading, cemented prostheses showed better stress distribution than screwed prostheses, whereas splinted crowns tended to reduce stress in the implant of the first molar. In the bone tissue cemented prostheses showed better stress distribution in bone tissue than screwed prostheses under axial and oblique loading. The splinted design only had an effect in the screwed prosthesis, with no influence in the cemented prosthesis. Cemented prostheses on MT implants showed more favorable stress distributions in implants/components and bone tissue. Splinting was favorable for stress distribution only for screwed prostheses under oblique loading.

Purpose: The aim of this study was to use three-dimensional finite element analysis to analyze the stress distribution transferred by single implant-supported prostheses placed in the anterior maxilla using different connections (external hexagon, internal hexagon, or Morse taper), inclinations of the load (0, 30, or 60 degrees), and surgical techniques for placement (monocortical/conventional, bicortical, or bicortical with nasal floor elevation)., Materials and Methods: Nine models representing a bone block of this region were simulated by computer-aided design software (InVesalius, Rhinoceros, SolidWorks). Each model received one implant, which supported a cemented metalloceramic crown. Using FEMAP software, finite elements were discretized while simulating a 178-N load at 0, 30, and 60 degrees relative to the long axis of the implant. The problem was solved in NEi Nastran software, and postprocessing was performed in FEMAP. Von Mises stress and maximum principal stress maps were made., Results: The von Mises stress analysis revealed that stress increased with increasing inclination of the load, from 0 to 30 to 60 degrees. Morse taper implants showed less stress concentration around the cervical and apical areas of the implant. The bicortical technique, associated or not with nasal floor elevation, contributed to decreasing the stress concentration in the apical area of the implant. Maximum principal stress analysis showed that the increase in inclination was proportional to the increase in stress on the bone tissue in the cervical area. Lower stress concentrations in the cortical bone were obtained with Morse taper implants and the bicortical technique compared with other connections and surgical techniques, respectively., Conclusion: Increasing the inclination of the applied force relative to the long axis of the implant tended to overload the peri-implant bone tissue and the internal structure of the implants. The Morse taper connection and bicortical techniques seemed to be more favorable than other connections or techniques, respectively, for restoring the anterior maxilla.

Objective: The purpose of this systematic review was to evaluate the use of mini implants to retain complete overdentures in terms of survival rates of mini implants, marginal bone loss, satisfaction, and quality of life., Data: This report followed the PRISMA Statement and PICO question. This review has been registered at PROSPERO under the number CRD42016036141., Source: Two independent reviewers performed a comprehensive search of studies published until September 2016 and listed in the PubMed/MEDLINE, Embase, and The Cochrane Library databases. The focused question was: is the use of mini implants feasible for prosthodontic rehabilitation with complete overdentures?, Results: The 24 studies selected for review evaluated 1273 patients whose mean age was 65.93 years; these patients had received 2494 mini implants and 386 standard implants for retaining overdenture prosthesis. The mean follow-up time was 2.48 years (range: 1-7 years). There was a higher survival rate of mini implants (92.32%). More frequent failures for maxillary (31.71%) compared with mandibular arches (4.89%). The majority of studies revealed marginal bone loss values similar to those of standard implants (<1.5mm). All studies verified an increase in satisfaction and quality of life after rehabilitation treatment with mini dental implants., Conclusion: The present systematic review indicates that the use of mini implants for retaining overdenture prosthesis is considered an alternative treatment when standard treatment is not possible, since it presents high survival rates, acceptable marginal bone loss, and improvements in variables related to satisfaction and quality of life., Clinical Significance: Based on the results of this study, the use of a minimum 4 and 6 mini implants can be considered a satisfactory treatment option for rehabilitation of the mandibular and maxillary arches respectively with a complete overdenture., (Copyright © 2016. Published by Elsevier Ltd.)

A biomechanical analysis of different types of implant connections is relevant to clinical practice because it may impact the longevity of the rehabilitation treatment. Therefore, the objective of this study is to evaluate the Morse taper connections and the stress distribution of structures associated with the platform switching (PSW) concept. It will do this by obtaining data on the biomechanical behavior of the main structure in relation to the dental implant using the 3-dimensional finite element methodology. Four models were simulated (with each containing a single prosthesis over the implant) in the molar region, with the following specifications: M1 and M2 is an external hexagonal implant on a regular platform; M3 is an external hexagonal implant using PSW concept; and M4 is a Morse taper implant. The modeling process involved the use of images from InVesalius CT (computed tomography) processing software, which were refined using Rhinoceros 4.0 and SolidWorks 2011 CAD software. The models were then exported into the finite element program (FEMAP 11.0) to configure the meshes. The models were processed using NeiNastram software. The main results are that M1 (regular diameter 4mm) had the highest stress concentration area and highest microstrain concentration for bone tissue, dental implants, and the retaining screw (P<0.05). Using the PSW concept increases the area of the stress concentrations in the retaining screw (P<0.05) more than in the regular platform implant. It was concluded that the increase in diameter is beneficial for stress distribution and that the PSW concept had higher stress concentrations in the retaining screw and the crown compared to the regular platform implant., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Statement of Problem: Radiotherapy has been considered a contraindication for rehabilitation with dental implants because it can change the survival rate of implants. Nevertheless, the installation of implants in irradiated patients has been used with varying success., Purpose: The purpose of this systematic review was to compare the success rate of implants placed in irradiated human bone tissue with that of implants placed in nonirradiated areas., Material and Methods: Searches were performed in the EMBASE, Cochrane, and PubMed/Medline databases up to December 2013 to identify clinical trials addressing the subject. This systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The relative risks of implant failure and survival curves were calculated considering a confidence interval of 95%. Heterogeneity was analyzed by using a funnel chart., Results: A total of 40 studies involving 2220 participants and 9231 dental implants were selected. The survival curve of the studies indicated a survival rate of 84.3% for implants installed in irradiated bone tissue. The meta-analysis indicated statistically significant differences (P<.001) between item success rates of implants placed in irradiated areas and those of implants placed in nonirradiated areas., Conclusions: Dental implants installed in the irradiated area of an oral cavity have a high survival rate, but strict monitoring is needed to prevent complications, thereby reducing possible failures., (Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Purpose: To evaluate a modified experimental model for medication-related osteonecrosis of the jaw (MRONJ) through the upper right central incisor extraction followed by intravenous bisphosphonate administration., Methods: Forty five rats underwent the upper right central incisor tooth extraction were divided in 2 groups: Group I - experimental group, 30 rats received an intravenous administration protocol of zoledronic acid 35μg/kg into the tail vein every two weeks, totalizing four administrations, during eight weeks of administration, previously the extraction, and Group II - control group, 15 rats didn't received any medication before extraction. The groups were subdivided in postoperative periods: 14/28/42 days. Clinical analysis and microtomography were performed to verify the presence of osteonecrosis. In addition, descritive histological analysis of hematoxylin-eosin stained sections was performed to evaluate the presence of osteonecrosis or necrotic foci., Results: Twelve (40%) rats, from experimental group, showed clinical signs of MRONJ (p=0.005), however, all samples showed imaginologic findings like osteolysis and loss of integrity of the cellular walls (p≤0.001). Microscopic evaluation revealed osteonecrosis areas with microbial colonies and inflammatory infiltrate (p≤0.001). In the control group, all animals presented the chronology of a normal wound healing., Conclusions: The presence of medication-related osteonecrosis of the jaw after maxillary central incisor extraction in rats. This new experimental model may be considered an option for the study of MRONJ.

The aim of this study was to perform a systematic review and meta-analysis to evaluate the possible benefits of platform-switching (PSW) implants when compared to regular platform (RP) implants in the categories of bone preservation and longevity. This systematic review and meta-analysis was performed in accordance with the PRISMA statement, PICO question, and Jadad scale. The relative risk (RR) of failure and the mean difference for marginal bone loss were calculated considering a confidence interval (CI) of 95%. Heterogeneity and subgroup analyses were performed, and funnel plots drawn. Twenty-five studies (17 randomized controlled trials (RCTs) and eight prospective studies) involving 1098 patients and 2310 implants were analysed. The meta-analysis revealed a significant reduction in crestal bone loss for PSW implants compared with RP implants (-0.41mm, 95% CI -0.52 to -0.29, P<0.00001). However, there was no statistically significant difference in implant failure (RR 1.10, 95% CI 0.6-2.02, P=0.75). A reduction in bone loss with PSW implants was observed for the following subgroups: RCTs only, implants in the maxilla, and implants in the mandible. PSW implants presented lower bone resorption compared with RP implants. RCTs should be done to explain the possible biases., (Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

Aim: Oral hygiene technique is an important factor in maintaining the health and comfort of hospitalized patients given the frequent presence of oral biofilm and pathogens brought on by mouth breathing. This is an important practice to assist patients in intensive care, in particular those who are intu-bated and under mechanical ventilation because the realization of oral hygiene reduces the patient's risk of complications and length of hospitalization. The objective of this research was to evaluate the oral health condition of patients hospitalized in an intensive care unit (ICU) and to clarify the importance of protocol standardization involving these patients' buccal hygiene., Materials and Methods: In this study, the sample consisted of 45 patients admitted to an ICU who were evaluated in relation to the oral biofilm score index., Results: The results indicated that there was no significant difference in the biofilm score associated with the genre (p = 0.091), age group (p = 0.549), or teething profile (p = 0.207). However, the biofilm score was greater in partial and fully edentulous patients when compared with dentulous patients., Conclusion: Based on these results, it is recommended that care providers in ICUs complete the relevant oral health care training programs., Clinical Significance: When in the ICU, suitable dental conduct following a protocol of prevention of oral biofilm can lead to earlier diagnosis and can prevent the spread of pathogenic microorganisms, particularly those that are systemic in patients with low immunity.

Despite clinical recovery of patients from an episode of acute kidney injury (AKI), progression to chronic kidney disease (CKD) is possible on long-term follow-up. However, mechanisms of this are poorly understood. Here, we determine whether activation of angiotensin-II type 1 receptors during AKI triggers maladaptive mechanisms that lead to CKD. Nine months after AKI, male Wistar rats develop CKD characterized by renal dysfunction, proteinuria, renal hypertrophy, glomerulosclerosis, tubular atrophy, and tubulointerstitial fibrosis. Renal injury was associated with increased oxidative stress, inflammation, α-smooth muscle actin expression, and activation of transforming growth factor β; the latter mainly found in epithelial cells. Although administration of losartan prior to the initial ischemic insult did not prevent or reduce AKI severity, it effectively prevented eventual CKD. Three days after AKI, renal dysfunction, tubular structural injury, and elevation of urinary biomarkers were present. While the losartan group had similar early renal injury, renal perfusion was completely restored as early as day 3 postischemia. Further, there was increased vascular endothelial growth factor expression and an early activation of hypoxia-inducible factor 1 α, a transcription factor that regulates expression of many genes that help reduce renal injury. Thus, AT1 receptor antagonism prior to ischemia prevented AKI to CKD transition by improving early renal blood flow recovery, lesser inflammation, and increased hypoxia-inducible factor 1 α activity.

Mycobacterium tuberculosis (M. tb) is the etiological agent of pulmonary tuberculosis (TB); this disease remains a worldwide health problem. Yin-Yang-1 (YY1) plays a major role in the maintenance and progression of some pulmonary diseases, including pulmonary fibrosis. However, the role of YY1 in TB remains unknown. The aim of this study was to elucidate the role of YY1 in the regulation of CCL4 and its implication in TB. We determined whether YY1 regulates CCL4 using reporter plasmids, ChIP and siRNA assays. Immunohistochemistry and digital pathology were used to measure the expression of YY1 and CCL4 in a mouse model of TB. A retrospective comparison of patients with TB and control subjects was used to measure the expression of YY1 and CCL4 using tissue microarrays. Our results showed that YY1 regulates the transcription of CCL4; moreover, YY1, CCL4 and TGF-β were overexpressed in the lung tissues of mice with TB during the late stages of the disease and the tissues of TB patients. The expression of CCL4 and TGF-β correlated with YY1 expression. In conclusion, YY1 regulates CCL4 transcription; moreover, YY1 is overexpressed in experimental and human TB and is positively correlated with CCL4 and TGF-β expression. Therefore, treatments that decrease YY1 expression may be a new therapeutic strategy against TB., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

A series of new organic polyimides were synthesized from 4-fluoro-4'4"-diaminotriphenylmethane and four different aromatic dianhydrides through a one-step, high-temperature, direct polycondensation in m-cresol at 180-200 °C, resulting in the formation of high-molecular-weight polyimides (inherent viscosities ~ 1.0-1.3 dL/g). All the resulting polyimides exhibited good thermal stability with initial decomposition temperatures above 434 °C, glass-transition temperatures between 285 and 316 °C, and good solubility in polar aprotic solvents. Wide-angle X-ray scattering data indicated that the polyimides were amorphous. Dense membranes were prepared by solution casting and solvent evaporation to evaluate their gas transport properties (permeability, diffusivity, and solubility coefficients) toward pure hydrogen, helium, oxygen, nitrogen, methane, and carbon dioxide gases. In general, the gas permeability was increased as both the fractional free volume and d-spacing were also increased. A good combination of permeability and selectivity was promoted efficiently by the bulky hexafluoroisopropylidene and 4-fluoro-phenyl groups introduced into the polyimides. The results indicate that the gas transport properties of these films depend on both the structure of the anhydride moiety, which controls the intrinsic intramolecular rigidity, and the 4-fluoro-phenyl pendant group, which disrupts the intermolecular packing.

The aim of this systematic review was to identify clinical studies on implants placed in the tuberosity region to determine the survival rate of these implants when compared to implants placed in other regions of the maxilla. A search for data published up until March 2014 was undertaken using the PubMed, Cochrane Library, Embase, and ScienceDirect databases. Eligible studies were selected according to inclusion and exclusion criteria. The first database search revealed 310 titles. After inclusion and exclusion criteria were applied, five studies remained for the detailed analysis. A total of 113 patients were followed for a period of 6-144 months; 289 implants were placed in the patients evaluated. There were eight failures/losses of dental implants in the tuberosity region; the overall survival rate was 94.63% for these implants. In controlled studies, the cumulative survival rates for implants placed in the maxillary tuberosity and other maxillary regions were 96.1% and 95%, respectively. In conclusion, implants placed into the maxillary tuberosity are a predictable alternative for the treatment of patients with insufficient bone volume in the maxillary region. However, randomized trials are needed to assess the effectiveness of this treatment., (Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

The retaining screw of the implant-supported dental prosthesis is the weakest point of the crown/implant system. Furthermore, crown height is another important factor that may increase the lever arm. Therefore, the aim of this study was to assess the stress distribution in implant prosthetic screws with different heights of the clinical crown of the prosthesis using the method of three-dimensional finite element analysis. Three models were created with implants (3.75 mm × 10 mm) and crowns (heights of 10, 12.5 and 15 mm). The results were visualised by means of von Mises stress maps that increased the crown heights. The screw structure exhibited higher levels of stresses in the oblique load. The oblique loading resulted in higher stress concentration when compared with the axial loading. It is concluded that the increase of the crown was damaging to the stress distribution on the screw, mainly in oblique loading.

The aim of this study was to evaluate stress distribution in the fixation screws and bone tissue around implants in single-implant supported prostheses with crowns of different heights (10, 12.5, 15 mm - crown-to-implant ratio 1:1, 1.25:1, 1.5:1, respectively). It was designed using three 3-D models. Each model was developed with a mandibular segment of bone block including an internal hexagon implant supporting a screw-retained, single metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm with crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. The applied forces were 200N (axial) and 100 N (oblique). The increase of crown height showed differences with the oblique load in some situations. By von Mises' criterion, a high stress area was concentrated at the implant/fixation screw and abutment/implant interfaces at crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. Using the maximum principal criteria, the buccal regions showed higher traction stress intensity, whereas the distal regions showed the largest compressive stress in all models. The increase of C/I ratio must be carefully evaluated by the dentist since the increase of this C/I ratio is proportional to the increase of average stress for both screw fixation (C/I 1:1 to 1:1.25 ratio=30.1% and C/I 1:1 to 1:1.5 ratio=46.3%) and bone tissue (C/I 1:1 to 1:1.25 ratio=30% and C/I 1:1 to 1:1.5 ratio=51.5%)., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Bone quality and quantity are important factors with regard to the survival rate of dental implants. The aim of this study was to conduct a systematic review of dental implants inserted in low-density bone and to determine the survival rate of dental implants with surface treatments over time. A systematic review of the literature was undertaken by two independent individuals; the Medline/PubMed database was searched for the period July 1975 to March 2013. Relevant reports on bone quality and osseointegration of dental implants were selected. The search retrieved 1018 references, and after inclusion and exclusion criteria were applied, 19 studies were selected for review. A total of 3937 patients, who had received a total of 12,465 dental implants, were analyzed. The survival rates of dental implants according to the bone density were: type I, 97.6%; type II, 96.2%; type III, 96.5%; and type IV, 88.8%. The survival rate of treated surface implants inserted in low-density bone was higher (97.1%) than that of machined surface implants (91.6%). Surface-treated dental implants inserted in low-density bone have a high survival rate and may be indicated for oral rehabilitation. However, more randomized studies are required to better evaluate this issue., (Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

Aim: This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework., Background: The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework., Case Description: All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation., Conclusion: The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications., Clinical Significance: This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

The purpose of this systematic review was to evaluate clinical studies on the follow-up survival of implants inserted in the zygomatic bone for maxillary rehabilitation. A comprehensive search of studies published from 2000 to July 2012 and listed in the PubMed/MEDLINE, Embase, and Cochrane Library databases was performed in accordance with the PRISMA statement. Relevant studies were selected according to predetermined inclusion and exclusion criteria. The initial database search yielded 751 titles. After filtering, 313 abstracts were selected, culminating in 42 full text articles. Application of eligibility criteria led to the elimination of 17 articles. Hence 25 full-text articles were considered clinically relevant and were included. Calculations of the interval survival rates and cumulative survival rates of implants could be carried out on the data extracted from the final list of included studies for the different time intervals. These studies reported the insertion of a total of 1541 zygomatic implants and 33 implant failures. Failure generally occurred during the first year interval and was related to clinical complications, such as recurrent acute and chronic sinusitis. After a 36-month follow-up, the survival rate was 97.86%. Additional studies with longer follow-up periods, including the number of zygomatic implants inserted and details of the variations in the surgical techniques used and the impact of the maxillary morphology are still required., (Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

HPV L1-based virus-like particles vaccines (VLPs) efficiently induce temporary prophylactic activity through the induction of neutralizing antibodies; however, VLPs that can provide prophylactic as well as therapeutic properties for longer periods of time are needed. For this purpose, we generated a novel HPV 16 L1-based chimeric virus-like particle (cVLP) produced in plants that contains a string of T-cell epitopes from HPV 16 E6 and E7 fused to its C-terminus. In the present study, we analyzed the persistence of specific IgG antibodies with neutralizing activity induced by immunization with these cVLPs, as well as their therapeutic potential in a tumor model of C57BL/6 mice. We observed that these cVLPs induced persistent IgG antibodies for over 12 months, with reactivity and neutralizing activity for VLPs composed of only the HPV-16 L1 protein. Efficient protection for long periods of time and inhibition of tumor growth induced by TC-1 tumor cells expressing HPV-16 E6/E7 oncoproteins, as well as significant tumor reduction (57 %), were observed in mice immunized with these cVLPs. Finally, we discuss the possibility that chimeric particles of the type described in this work may be the basis for developing HPV prophylactic and therapeutic vaccines with high efficacy.

Background: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0°, 17°, and 30°) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses., Methods: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0°, 17°, and 30°), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively., Results: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P <0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P <0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045)., Conclusions: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

The purpose of this study was to assess the influence of the crown height of external hexagon implants on the displacement and distribution of stress to the implant/bone system, using the three-dimensional finite element method. The InVesalius and Rhinoceros 4.0 softwares were used to generate the bone model by computed tomography. Each model was composed of a bone block with one implant (3.75 x 10.0 mm) with external hexagon connections and crowns with 10 mm, 12.5 mm and 15 mm in height. A 200 N axial and a 100 N oblique (45°) load were applied. The models were solved by the NeiNastran 9.0 and Femap 10.0 softwares to obtain the results that were visualized by maps of displacement, von Mises stress (crown/implant) and maximum principal stress (bone). The crown height under axial load did not influence the stress displacement and concentration, while the oblique loading increased these factors. The highest stress was observed in the neck of the implant screw on the side opposite to the loading. This stress was also transferred to the crown/platform/bone interface. The results of this study suggest that the increase in crown height enhanced stress concentration at the implant/bone tissue and increased displacement in the bone tissue, mainly under oblique loading.

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and peri-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the SolidWorks 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0°), oblique (45°), and lateral (90°) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the peri-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Purpose: The aim of this study was to evaluate the bone repair process in the maxillary sinus in monkeys treated with high-density porous polyethylene (Medpor), Methods: Four capuchin monkeys (Cebus apella) were submitted to bilateral horizontal osteotomies in the anterior wall of the maxillary sinus and divided into 2 groups: control group, left side with no implants, and porous polyethylene group, right side with Medpor. After a period of 145 days after implant placement, the maxillae were removed for histologic and histometric analyses., Results: Bone repair in osteotomized areas took place by connective tissue in 58.5% and 58.7% in the control group and the porous polyethylene group, respectively. In the contact surface with Medpor, bone repair occurred in 41.3%., Conclusions: Medpor was not reabsorbed within the period of this study and allowed bone repair surrounding it. The porous polyethylene constitutes a feasible alternative for bone defect reconstruction.

The prosthetic treatments play a role in the rehabilitation of patients with congenital and acquired cleft palate. To prepare the surgical field and/or correct inevitable sequelae of the surgery, the rehabilitation with obturator prosthesis is an auxiliary or complementary treatment to surgical treatments. In cases where the surgical treatment is contraindicated, the prosthetic rehabilitation becomes a definitive treatment. The denture is planned and fabricated according to each patient. Therefore, the aim of this study was to discuss the prosthetic rehabilitation performed in patients with oronasal communication.

Kallikrein 1 (hK1) is a tissue enzyme responsible for kinin release in inflammatory cascade. This study was delineated to study the distribution and the co-localization of hK1 and kinin B1 and B2 receptors with glial and/or neuronal proteins markers, in the hippocampus of patients with refractory temporal lobe epilepsy, associated with hippocampal sclerosis (TLE-HS), comparing with control tissues. Hippocampal levels of KLK1 mRNA were also measured. hK1, kinin B1 and B2 receptors, NeuN and GFAP were analyzed using immunohistochemistry and confocal microscopy and KLK1 mRNA was quantified with real time PCR. Increased expression of hK1 by astrocytes co-localized with GFAP was found, contrasting with kinin B1 and B2 receptors, which were co-localized with NeuN in the sclerotic hippocampus. In addition, KLK1 mRNA was also up-regulated in same tissues. These data suggest an overexpression of kallikrein-kinin system and a neuron-glia interaction in the inflammatory process present in refractory TLE-HS., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

We investigated a relationship between the FLAIR signal found in mesial temporal sclerosis (MTS) and inflammation. Twenty nine patients were selected through clinical and MRI analysis and submitted to cortico-amygdalo-hippocampectomy to seizure control. Glutamate, TNFα, IL1, nitric oxide (NO) levels and immunostaining against IL1β and CD45 was performed. Control tissues (n=10) were obtained after autopsy of patients without neurological disorders. The glutamate was decreased in the temporal lobe epilepsy (TLE) -MTS group (p<0.001), suggesting increased release of this neurotransmitter. The IL1β and TNFα were increased in the hippocampus (p<0.05) demonstrating an active inflammatory process. A positive linear correlation between FLAIR signal and NO and IL1β levels and a negative linear correlation between FLAIR signal and glutamate concentration was found. Lymphocytes infiltrates were present in hippocampi of TLE patients. These data showed an association between hippocampal signal alteration and increased inflammatory markers in TLE-MTS.

The use of craniofacial implants is an effective treatment for patients with deformities, burns, and cancer sequelae. The sites with the most successful implants are the auricular, nasal, and orbital regions. Furthermore, other factors can affect the implant longevity such as irradiated area, surgical technique, bone quality and quantity, macrostructure and microstructure of the implant, maintenance, and systemic factors.

The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45°) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.

Purpose: As reported by several authors, angiotensin II (AngII) is a proinflammatory molecule that stimulates the release of inflammatory cytokines and activates nuclear factor kappaB (NFkappaB), being also associated with the increase of cellular oxidative stress. Its production depends on the activity of the angiotensin converting enzyme (ACE) that hydrolyzes the inactive precursor angiotensin I (AngI) into AngII. It has been suggested that AngII underlies the physiopathological mechanisms of several brain disorders such as stroke, bipolar disorder, schizophrenia, and disease. The aim of the present work was to localize and quantify AngII AT1 and AT2 receptors in the cortex and hippocampus of patients with temporal lobe epilepsy related to mesial temporal sclerosis (MTS) submitted to corticoamygdalohippocampectomy for seizure control., Method: Immunohistochemistry, Western blot, and real-time PCR techniques were employed to analyze the expression of these receptors., Results: The results showed an upregulation of AngII AT1 receptor as well as its messenger ribonucleic acid (mRNA) expression in the cortex and hippocampus of patients with MTS. In addition, an increased immunoexpression of AngII AT2 receptors was found only in the hippocampus of these patients with no changes in its mRNA levels., Discussion: These data show, for the first time, changes in components of renin-angiotensin system (RAS) that could be implicated in the physiopathology of MTS.

Detection of recurrent and metastatic thyroid cancer remains a considerable challenge in patients presenting with rising thyroglobulin levels but with negative I-131 whole body scintigraphy. Such is the case in this patient with follicular thyroid cancer in whom subsequent FDG PET scanning showed a solitary hypermetabolic cervical lesion. With definitive management and multidisciplinary approach in mind, radioguided surgical excision came into play through the use of Tc-99m sestamibi, leading to successful removal of the lesion. Histopathology, however, revealed a parathyroid adenoma. This highlights the importance of considering differential diagnoses in apparent cases of recurrence to avoid potential pitfalls.

Fluoride has been widely used in dentistry as a caries prophylactic agent. However, there has been some speculation that excess fluoride could cause an impact on genome integrity. In the current study, the potential DNA damage associated with exposure to fluoride was assessed in cells of blood, liver, kidney, thyroid gland and urinary bladder by the single cell gel (comet) assay. Male Wistar rats aging 75 days were distributed into seven groups: Groups 1 (control), 2, 3, 4, 5, 6 and 7 received 0 (deionized water), 10, 20, 40, 60, 80 and 100 mgF/Kg body weight from sodium fluoride (NaF), respectively, by gastrogavage. These groups were killed at 2 h after the administration of the fluoride doses. The level of DNA strand breaks did not increase in all organs evaluated and at all doses of NaF tested, as depicted by the mean tail moment. Taken together, our results suggest that oral exposure to NaF did not result in systemic genotoxic effect in multiple organs related to fluoride toxicity. Since DNA damage is an important step in events leading to carcinogenesis, this study represents a relevant contribution to the correct evaluation of the potential health risk associated with chemical exposure.

Molecular biology tools have been employed to investigate the participation of peptides in human temporal lobe epilepsy (TLE). Active polypeptides and their receptors have been related to several brain processes, such as inflammation, apoptosis, brain development, K(+) and Ca(2+) channels' activation, cellular growth, and induction of neuronal differentiation. Previous works have shown a neuroprotector effect for kinin B2 receptor and a deleterious, pro-epileptogenic action for kinin B1 receptor in animal models of TLE. The present work was delineated to analyze the kinin B1 and B2 receptors expression in the hippocampus of patients presenting refractory mesial TLE. The hippocampi were removed during the patients surgery in a procedure used for seizure control and compared with tissues obtained after autopsy. Nissl staining was performed to study the tissue morphology and immunohistochemistry, and Western blot was used to compare the distribution and levels of both receptors in the hippocampus. In addition, real time PCR was employed to analyze the gene expression of these receptors. Nissl staining showed sclerotic hippocampi with hilar, granular, and pyramidal cell loss in TLE patients. Immunohistochemistry and Western blot analyses showed increased expression of kinin B1 and B2 receptors but the real-time PCR data demonstrated increased mRNA level only for kinin B2 receptors, when compared with controls. These data show for the first time a relationship between human TLE and the kallikrein-kinin system, confirming ours previous results, obtained from experimental models of epilepsy.

The effect of glycemic state on status epilepticus (SE) development was studied in animals of different ages, submitted to pilocarpine model of epilepsy. Groups: I- Rats with 9-day-old (P9): IA. Submitted to 1SE; IB. Saline-treated; IC. Induced- hyperglycemia; ID. Induced- hyperglycemia+SE; II- Rats submitted to three consecutive episodes of SE at P7, P8 and P9; III- Rats submitted to 1SE at P17; IV- Rats submitted to 1SE at P21. Hippocampal cell death and the expression of glucose transporter GLUT3 were analyzed in group I. The results demonstrated normoglycemia in the groups IA, IB and II, hypoglycemia in group III and hyperglycemia in group IV, showing that the glycemia during SE is age dependent. Induced hyperglycemia during SE in P9 protected the hippocampal neurons from death and both groups IC and ID presented increased GLUT3 expression, showing high glucose consumption by the hippocampus.

Aim: While it is well-known that there is 18F-FDG uptake in breast tumors, clinical impact of (18)F-FDG PET in managing breast cancer patients is not well-studied., Methods: One hundred and thirty-three consecutive breast cancer patients from May 1996 to June 2000 were studied. All patients were treated and being followed. Reasons of referral included equivocal conventional studies, staging/re-staging, clinical suspicion of recurrence, and elevated serum tumor markers. Clinical status at 6 months postPET is used as the gold standard in lesions of worsening versus stable or improving., Results: PET was 69% sensitive and 80% specific in predicting clinical stage at 6 months. This 69% of the patients who got worse at 6 months was PET positive and 80% of the patients who were stable or improving at 6 months were PET negative. There was a significant association between PET results and clinical outcome, after adjusting for stage of disease (P=0.04), or for the treatment patients received (P<0.01). Negative PET results changed therapy as often as positive ones did. PET influenced treatment decisions in 74% of the patients referred for study., Conclusions: PET holds promise as a sensitive and specific modality in following treated breast cancer patients. PET results contain information on 6 month outcome that is independent of stage or past treatment and influence patient management.

Prolonged and persistent myocardial stunning has recently been demonstrated using technetium-99m sestamibi gated single-photon emission tomography (SPET) myocardial perfusion imaging post exercise or pharmacological stress test. In this study, we investigated the early postischemic transient myocardial stunning on early and delayed poststress thallium-201 gated SPET myocardial perfusion imaging using segmental wall motion (WM) and wall thickening (WT) analysis. A total of 1,680 segments from 84 patients' studies (53 men and 31 women, mean age 60 years) were evaluated on both early and delayed thallium-201 gated SPET treadmill exercise (59) or dobutamine stress (25) myocardial perfusion imaging. Semiquantitative analysis of perfusion, WM and WT in all segments was performed by two observers. Segments were classified according to changes in WM and WT between early and delayed images into normal, fixed abnormality, or improved abnormality (transient stunning), and were further classified according to changes in perfusion into normal, fixed defects, or ischemic. There were significant correlations between perfusion and WM, perfusion and WT, and WM and WT segmental scores on both early and delayed images. Transient stunning was seen significantly ( P < 0.001) more often in ischemic segments than were normal or fixed perfusion defects using WM (58%) and WT (50%) assessments. There was also a significant correlation between the severity of ischemia and transient stunning with either WM ( P < 0.05) or WT ( P < 0.005) evaluation. Segmental myocardial contractility assessment from gated SPET (201)Tl myocardial perfusion imaging using WM and WT was comparable, and results correlated well with the myocardial perfusion assessment. Early transient myocardial stunning was frequently observed in ischemic segments and was related to the severity of myocardial ischemia.

Aim of the Study: To assess the impact of repeated F-18 FDG studies on the management of patients with bone and soft tissue (B&S) sarcomas., Material and Methods: Twenty patients with B&S tissue tumors (11 M and 9 F age 17-72 years) had 52 F-18 FDG Dual Head Coincidence Imaging (DHCI) studies. 7 patients were followed for 6 months to 2 years clinically after removal of the primary tumor. Thirteen patients were evaluated for suspected recurrences. Patient's preparation, F-18 FDG injection and imaging procedure were done according to department protocol. Attenuation corrected images were interpreted visually by 3 trained physicians. Tumor to background ratios were calculated for all lesions., Results: In 13 patients having both studies, baseline FDG and CT/MRI were concordant in 8 patients, FDG detected more lesions in 3 patients but it did not detect 4 metastatic pulmonary nodules in 2 patients. Follow up studies showed stable disease in 10 patients while 6 patients who showed worsening disease needed to change their chemotherapy. Surgery was avoided in 2 patients and 2 patients showed improved response., Conclusion: Repeated F-18 FDG DHCI examinations proved to have an impact on the clinical management of patients with malignant bone and soft tissue sarcoma. It helps to differentiate postoperative changes from local recurrence.

The authors report the findings of a radionuclide diuretic renogram in a patient with markedly dilated pelves bilaterally that filled most of the abdominal cavity. With the patient in the sitting position, at the end of the furosemide injection, there was good delineation and filling of the dilated calyces. These findings are unusual because of the extensive pelvicaliceal dilatation, and they emphasize the importance of the sitting position.

The authors describe a patient with the acquired immunodeficiency syndrome who had active pulmonary tuberculosis and was receiving anti-tuberculosis treatment. High-grade fever and a right-sided pleural effusion had recently developed. Results of a Ga-67 scan were negative for any focal infection in the chest. Fluorine-18 fluorodeoxyglucose positron emission tomography showed increased uptake in the right lower lung field, which correlated with the diagnosis of concomitant bacterial pneumonia. Anti-tuberculosis treatment can decrease the sensitivity of the Ga-67 scan and could have contributed to this discrepancy. The authors predict that the fluorine-18 fluorodeoxyglucose positron emission tomographic scan will play an important diagnostic role in the management of such a selected group of patients.

OBJECTIVE AND METHODS: This study was undertaken to find the role of fluorine-18-fluorodeoxyglucose (F18-FDG) in the diagnostic work-up of febrile Acquired Immune Deficiency Syndrome (AIDS) patients. Forty-seven (42 male and 5 female; mean age = 40.3 years) febrile patients with AIDS underwent imaging with F18-FDG by Dual Head Coincidence Imaging (DHCI). Findings were correlated with other imaging modalities.RESULTS: Our data show good sensitivity for scanning with F18-FDG by DHCI in determining the extent of Castleman's disease, lymphoma, Kaposi's sarcoma (KS), adenocarcinoma, and germ cell carcinoma. Various opportunistic infections also manifest with increased F18-FDG uptake.CONCLUSION: Total-body imaging can be done with F18-FDG with better resolution and a shorter procedure time compared to imaging with Gallium-67 (Ga-67). Furthermore, F18-FDG is more sensitive than Ga-67 for evaluating extent of involvement in various pathologies affecting AIDS patients. The new technology of DHCI is a good alternative for hospitals with no dedicated positron emission tomography (PET) scanner.