Search

The use of iron waste in concrete is now of considerable importance, mainly because of the benefits for the environment and for improving the strength of concrete. The increased and unused of this industrial byproducts represents a challenge for the environment and human health. This article experimentally explores the influence of utilizing iron powder waste and iron fibers in concrete in order to enhance the thermophysical properties of concrete and reduce the environmental impact resulting from iron waste. The aim of this work is to study the thermophysical properties (thermal conductivity, volumetric heat capacity, thermal diffusivity and thermal effusivity) of concrete with waste iron powder and iron fibers for application in building construction. The iron powder waste was added to the concrete with different percentages of 0%, 5%, 15%, 20% and 25% respectively as a partial replacement of sand. The iron fibers were added with mix proportions including 1.0%, 1.5%, 2.0% and 2.5% by volume of concrete, and in two different arrangements, uniform and random. The thermal conductivity and the volumetric heat capacity of these samples were measured experimentally in the dry state at ambient temperature (20 °C), and at 28 days of age. The effect of the integration of iron powder and fiber on thermal properties was analysed.

In this study, an investigation was conducted on four distinct configurations, designated as Case-1, Case-2, Case-3, and Case-4, focusing on parametric analysis. Each configuration features a cylindrical enclosure containing pure Gallium, a phase change material (PCM). The solid-to-liquid phase transition of the encapsulated material was examined using a 2D CFD methodology. Additionally, the effect of applying three temperatures, T1=32∘C, T2=39∘C, and T3=42∘C, along the generator of the enclosure, with or without fins, was also studied. To accurately model the melting process of the PCM, the Enthalpy- Porosity Method was employed, and meticulous detailing of underlying assumptions was under- taken to ensure precise representation. The validation process involved comparing outcomes of the physical solidification/melting model with reference data from a state-of-the-art study. The specific cases comprised Case-1 - a slender finless cylinder; Case-2 - a thin finned cylinder (l=10mm, t=0.6mm); Case-3 - featuring larger fins (l=20mm, t=0.6mm); and Case-4 - incorporating the largest fins (l=30mm, t=0.6mm). Strategically incorporating thin fins accelerates Gallium melting significantly, reducing times by up to 89%. This enhancement is driven by a 96% increase in the heat transfer coefficient (h), leading to faster melting rates. In addition, fins boost the Nusselt number (Nu) by 91%, indicating improved convective heat transfer and enhanced melting. Melting rates increase by around 30%, notably in Case-3. Temperature T1 shifts dominant heat transfer from convection to conduction, as seen in 2D CFD contours with stratified patterns in Case-3 at t=240s and Case-4 at t=240s and t=300s. A localized cold spot at t = 300s in Case-4 signals localized heat transfer effects.

In the present study, a comparative assessment is conducted to evaluate the outcomes derived from two-dimensional (2D) and three-dimensional (3D) computational fluid dynamics (CFD) models utilizing the unsteady Reynolds-averaged Navier–Stokes (URANS) approach. The focus lies on the aerodynamic performance of the H-Darrieus vertical axis wind turbine, which has been the subject of numerous numerical investigations since 2010. The k−ω shear stress transport (SST) turbulence model is employed to replicate the flow structures evolving in the turbine wake.The maximum power coefficients attained through 2D and 3D modeling are reported as Cp=0.4016 and Cp=0.5734, respectively, at a tip speed ratio (λ) of 3.0976. The maximum 2D and 3D absolute errors, corresponding to the evaluation of the power coefficients, are determined to be 14.9714% and 29.1582%, respectively. These errors are calculated at λ=2.5183 and λ=3.0976. The parametric study conducted herein reveals that the range of the power coefficient enhancement, considering 3D aerodynamic effects, surpasses that obtained from 2D calculations. In 3D modeling, this range is delineated between λ=1.85 and λ=3.10, whereas, in 2D modeling, it is defined by the interval bounded by λ=2.05 and λ=3.10. The essential contours for comparing the 2D and 3D approaches and for characterizing the flow structures developing around the H-Darrieus turbine are generated and analyzed.

This critical review delves into the impact of Computational Fluid Dynamics (CFD) modeling techniques, specifically 2D, 2.5D, and 3D simulations, on the performance and vortex dynamics of Darrieus turbines. The central aim is to dissect the disparities apparent in numerical outcomes derived from these simulation methodologies when assessing the power coefficient (Cp) within a defined velocity ratio (λ) range. The examination delves into the prevalent turbulence models shaping Cp values, and offers insightful visual aids to expound upon their influence. Furthermore, the review underscores the predominant rationale behind the adoption of 2D CFD modeling, attributed to its computationally efficient nature vis-à-vis the more intricate 2.5D or 3D approaches, particularly when gauging the turbine’s performance within the designated λ realm. Moreover, the study meticulously curates a compendium of findings from an expansive collection of over 250 published articles. These findings encapsulate the evolution of pivotal parameters, including Cp, moment coefficient (Cm), lift coefficient (Cl), and drag coefficient (Cd), as well as the intricate portrayal of velocity contours, pressure distributions, vorticity patterns, turbulent kinetic energy dynamics, streamlines, and Q-criterion analyses of vorticity. An additional focal point of the review revolves around the discernment of executing 2D parametric investigations to optimize Darrieus turbine efficacy. This practice persists despite the emergence of turbulent flow structures induced by geometric modifications. Notably, the limitations inherent to the 2D methodology are vividly exemplified through compelling CFD contour representations interspersed throughout the review. Vitally, the review underscores that gauging the accuracy and validation of CFD models based solely on the comparison of Cp values against experimental data falls short. Instead, the validation of CFD models rests on time-averaged Cp values, thereby underscoring the need to account for the intricate vortex patterns in the turbine’s wake—a facet that diverges significantly between 2D and 3D simulations. In a bid to showcase the extant disparities in CFD modeling of Darrieus turbine behavior and facilitate the selection of the most judicious CFD modeling approach, the review diligently presents and appraises outcomes from diverse research endeavors published across esteemed scientific journals.

The hygrometric method is used to determine new thermodynamic data on water activity and saturated aqueous solution of the water/d-sucrose/ammonium dihydrogen phosphate (ADP) system in a wide range of NH4H2PO4 molality, ranging from 0.1 to 3 mol⋅kg−1, and for various d-sucrose contents from 0 to 4 mol⋅kg−1. Powder X-ray diffraction (XRD) and attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy were used to characterize the solid state. The Pitzer–Simonson–Clegg model (PSC) is used to fit the experimental data of osmotic coefficient obtained from water activities data. The predicted saturated aqueous solutions, with the PSC model, are in good agreement with experimental data. For the concentration inferior to 1 mol⋅kg−1, the negative deviation from ideality was shown with increasing the ADP concentrations. The estimated values of the activity coefficient of d-sucrose, activity coefficient of ADP, and the Gibbs energy of transfer of ADP from water to mixture (water/d-sucrose) show that both ADP and d-sucrose exert significant salting-out effects on the aqueous solution. [ABSTRACT FROM AUTHOR]

The aim of this study was to measure the thermophysical properties (thermal conductivity, volumetric thermal capacity, thermal diffusivity, and thermal effusivity) of red earth stabilized with cement and substituted with waste glass powder. Several samples (red earth) were stabilized with 6% and 12% cement and incorporated with different percentages of waste glass powder, which varied from 10% to 30%. The bulk density of the 12 samples was measured in the dry state and at room temperature. All samples were analyzed by a scanning electron microscope (SEM). The thermal conductivity and specific heat of the composite materials were measured experimentally with a thermal conductivity device (CT meter) in the dry state and at ambient temperature. The experimental results showed a decrease in the thermophysical parameters of stabilized red earth containing 12% cement and substituted by 30% glass powder. The following results were obtained: 53.97% for thermal conductivity, 45.42% for volumetric specific heat, 15.66% for thermal diffusivity, and 49.88% for thermal effusivity. The bulk density of the red earth also decreased by 13.66% in the dry state at ambient temperature. Stabilization with 6% and 12% cement played an important role in the compactness of the material and, consequently, improved its thermophysical performance. The composition of this new ternary material significantly affected the thermophysical properties of the red earth.

Natural materials (e.g. rocks and soils) are porous media, whose microstructures present a wide diversity. They generally consist of a heterogeneous solid phase and a porous phase which may be fully or partially saturated with one or more fluids. The prediction of elastic and acoustic properties of porous materials is very important in many fields, such as physics of rocks, reservoir geophysics, civil engineering, construction field and study of the behavior of historical monuments. The aim of this work is to predict the elastic and acoustic behaviors of isotropic porous materials of a solid matrix containing dry, saturated and partially saturated spherical pores. For this, a homogenization technique based on the Mori–Tanaka model is presented to connect the elastic and acoustic properties to porosity and degree of water saturation. Non-destructive ultrasonic technique is used to determine the elastic properties from measurements of P-wave velocities. The results obtained show the influence of porosity and degree of water saturation on the effective properties. The various predictions of Mori–Tanaka model are then compared with experimental results for the elastic and acoustic properties of calcarenite.

This study aims to provide a thermophysical characterization of a new economical and green mortar. This material is characterized by partially replacing the cement with recycled soda lime glass. The cement was partially substituted (10, 20, 30, 40, 50 and 60% in weight) by glass powder with a water/cement ratio of 0.4. The glass powder and four of the seven samples were analyzed using a scanning electron microscope (SEM). The thermophysical properties, such as thermal conductivity and volumetric specific heat, were experimentally measured in both dry and wet (water saturated) states. These properties were determined as a function of the glass powder percentage by using a CT-Meter at different temperatures (20 °C, 30 °C, 40 °C and 50 °C) in a temperature-controlled box. The results show that the thermophysical parameters decreased linearly when 60% glass powder was added to cement mortar: 37% for thermal conductivity, 18% for volumetric specific heat and 22% for thermal diffusivity. The density of the mortar also decreased by about 11% in dry state and 5% in wet state. The use of waste glass powder as a cement replacement affects the thermophysical properties of cement mortar due to its porosity as compared with the control mortar. The results indicate that thermal conductivity and volumetric specific heat increases with temperature increase and/or the substitution rate decrease. Therefore, the addition of waste glass powder can significantly affect the thermophysical properties of ordinary cement mortar.

This critical review delves into the impact of Computational Fluid Dynamics (CFD) modeling techniques, specifically 2D, 2.5D, and 3D simulations, on the performance and vortex dynamics of Darrieus turbines. The central aim is to dissect the disparities apparent in numerical outcomes derived from these simulation methodologies when assessing the power coefficient ( C p ) within a defined velocity ratio (λ) range. The examination delves into the prevalent turbulence models shaping C p values, and offers insightful visual aids to expound upon their influence. Furthermore, the review underscores the predominant rationale behind the adoption of 2D CFD modeling, attributed to its computationally efficient nature vis-à-vis the more intricate 2.5D or 3D approaches, particularly when gauging the turbine's performance within the designated λ realm. Moreover, the study meticulously curates a compendium of findings from an expansive collection of over 250 published articles. These findings encapsulate the evolution of pivotal parameters, including C p , moment coefficient ( C m ), lift coefficient ( C l ), and drag coefficient ( C d ), as well as the intricate portrayal of velocity contours, pressure distributions, vorticity patterns, turbulent kinetic energy dynamics, streamlines, and Q-criterion analyses of vorticity. An additional focal point of the review revolves around the discernment of executing 2D parametric investigations to optimize Darrieus turbine efficacy. This practice persists despite the emergence of turbulent flow structures induced by geometric modifications. Notably, the limitations inherent to the 2D methodology are vividly exemplified through compelling CFD contour representations interspersed throughout the review. Vitally, the review underscores that gauging the accuracy and validation of CFD models based solely on the comparison of C p values against experimental data falls short. Instead, the validation of CFD models rests on time-averaged C p values, thereby underscoring the need to account for the intricate vortex patterns in the turbine's wake—a facet that diverges significantly between 2D and 3D simulations. In a bid to showcase the extant disparities in CFD modeling of Darrieus turbine behavior and facilitate the selection of the most judicious CFD modeling approach, the review diligently presents and appraises outcomes from diverse research endeavors published across esteemed scientific journals. [ABSTRACT FROM AUTHOR]

In this work, we study the variability of the lithological composition and organic matter content of samples were taken from the different layers M, X and Y of the Timahdit oil shale in Morocco, in order to experimentally analyze the impact of this variability on petrophysical measurements. The objective of this study is to predict the properties of the layers, including their thermal conductivity, thermal diffusivity, porosity and P and S wave velocities. The results of the study of the impact of the organic matter content of the samples on the petrophysical measurements show that, regardless of the organic matter content, thermal conductivity and diffusivity remain insensitive, while P and S wave velocities decrease linearly and porosity increases with increasing organic matter content. On the other hand, the study of the organic matter variability content is consistent with the velocity ratio, so can be used as an organic matter indicator of the layers. Conductivity and thermal diffusivity are almost invariant to the variability of the organic matter.

Acknowledgments Moreover, we would like to thank all the institutions and personnel involved in operating the Iberarray temporary seismic networks in Iberia and North Africa, and ORFEUS/EIDA for the available data. [Extracted from the article]

The following study aims at investigating the 2D distribution of the seismic wave attenuation based on the quality factor of the seismic coda waves in the northern part of Morocco. In this regard, the waveforms of 66 local earthquakes have been analyzed. The waveforms were recorded from 26 broadband seismic stations deployed by the Scientific Institute of Rabat during 2008, through the different structural domains. The coda wave seismic quality factor (QC) has been extracted through the application of the back-scattering model proposed by Aki and Chouet (1975) using four central frequencies (1.5, 3, 6, and 12 Hz) and through four lapse time windows (30, 40, 50, and 60 s). Additionally, spatial distribution maps of the quality factor of the coda waves, for this region, were generated. The study area, based on the 2D maps of the quality factor, has revealed the existence of several stable anomalies of the QC values for all frequencies and for all windows used, Al-Hoceima and Nador regions for instance, and has shown that all territory under study can be divided into five different zones. The comparison of the spatial variations of the seismic wave attenuation, geological, and geophysical characteristics of the Northern Morocco shows that the seismic attenuation correlates with the seismic activity, the position of the fault zones, the heat flow, and the Cenozoic volcanism. Furthermore, the attenuation of the coda waves decreases with the lapse time window increasing (and accordingly with the depth of the seismic wave penetrating). Such behavior in the Q-factor may indicate that the upper part of the lithosphere is more heterogeneous compared to the lower layers. These results can be used not only for scientific research, but also in the practice domain for the calculation of the earthquake source parameters or in the mapping of seismic hazard. [ABSTRACT FROM AUTHOR]