Search

Background: The purpose of study was to evaluate and compare chemical quality of Iranian bottled drinking water reported on manufacturer's labeling and standards. Methods: This study was a cross-sectional descriptive study and done during July to December 2008. The bottled mineral water collected from shops randomly were analyzed for all parameters address on manufacturer's labeling and the results were compared with the manufacturer's labeling data, WHO Guideline Values, USEPA Maximum Contaminant Levels and the maximum contaminant levels of drinking water imposed by the Iranian legislation. Statistical analysis on data was done with the Kolmogorov-Smirnov test for normal distribution, the paired t-test to compare the data with manufacturer's labeling and the one-sample t-test to compare with standard and MCL values at P < 0.05 of confidence level. Results: The results showed a statistically significant difference with manufacturer's labeling values, however there was no significant difference between the values of magnesium and pH and manufacturer's labeling values (P> 0.05). In addition, pH and calcium values were significantly higher than their proposed values indicated by Iranian National Legislation and international MCLs (P< 0.05). Conclusion: Our results are extremely important for the health supervisory agencies such as Ministry of Health and Institute of Standards & Industrial Research of Iran to have more effective controls on bottled water industries, and to improve periodical the proposed standard values. [ABSTRACT FROM AUTHOR]

Decabromodiphenyl ether (BDE-209) is recognized as an emerging and hazardous pollutant in numerous ecosystems. Despite this, only a few studies have concurrently investigated the biodegradation of BDE-209 by a microbial consortium comprising both bacteria and fungi. Consequently, the interactions between bacterial and fungal populations and their mutual effects on BDE-209 degradation remain unclear. Our main objective was to concurrently assess the changes and activity of bacterial and fungal communities during the biodegradation of BDE-209 in a real soil matrix. In the present study, various organic substrates were employed to promote soil biomass for the biodegradation of BDE-209. Soil respiration and molecular analysis were utilized to monitor biological activity and biomass community structure, respectively. The findings revealed that the use of wheat straw in the soil matrix resulted in the highest soil respiration and microbial activity among the treatments. This approach obviously provided suitable habitats for the soil microflora, which led to a significant increase in the biodegradability of BDE-209 (49%). Biomass survival efforts and the metabolic pathway of lignin degradation through co-metabolism contributed to the biodegradation of BDE-209. Microbial community analysis identified Proteobacteria (Alphaproteobacteria-Betaproteobacteria), Firmicutes, Bacteroides (bacterial phyla), as well as Ascomycota and Basidiomycota (fungal phyla) as the key microorganisms in the biological community involved in the biodegradation of BDE-209. This study demonstrated that applying wheat straw can improve both the biological activity and the biodegradation of BDE-209 in the soil of polluted sites., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Advanced oxidation processes (AOPs) and advanced reduction processes (ARPs) are a set of chemical treatment procedures designed to eliminate organic (sometimes inorganic) contamination in water and wastewater by producing free reactive radicals (FRR). UV irradiation is one of the factors that are effectively used in oxidation-reduction processes. Not only does the UV beam cause the photolysis of contamination, but it also leads to the product of FRR by affecting oxidants-reductant, and the pollutant decomposition occurs by FRR. UV rays produce active radical species indirectly in an advanced redox process by affecting an oxidant (O 3 , H 2 O 2 ), persulfate (PS), or reducer (dithionite, sulfite, sulfide, iodide, ferrous). Produced FRR with high redox potential (including oxidized or reduced radicals) causes detoxification and degradation of target contaminants by attacking them. In this review, it was found that ultraviolet radiation is one of the important and practical parameters in redox processes, which can be used to control a wide range of impurities., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study aimed to investigate the acute and chronic hazard quotients of chlorpyrifos and diazinon for tomatoes in preharvest and postharvest conditions, and to evaluate the relationship between the main variables, including temperature and contact time and pesticide dissipation at different conditions using response surface methodology for the first time. The qualification analyses were conducted by a gas chromatography-tandem mass spectrometry. The Monte Carlo simulation technique was utilized to evaluate the variability and uncertainty and achieve more accurate results in the health risk assessment process. A quadratic model and the second-order polynomial analysis were employed to investigate the mutual effect of time and temperature on removing diazinon and chlorpyrifos. Based on findings, the chronic hazard quotient values of chlorpyrifos and diazinon residues ranged from 0.43 - 1.33 to 0.13 - 2.27 for boiling, 0.65 - 1.49 to 3.05 - 7.15 for room condition, and 0.63 - 1.92 to 3.28 - 7.47 for refrigerator condition, respectively. According to the Monte Carlo simulation, the hazard quotient and estimated daily intake values were more affected by the consumption rate, pesticide concentration, and body weight. The results of response surface methodology showed that the effect of temperature variations on the dissipation of both pesticides was more than that of contact time variations., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The aim of this study was to evaluate the potential pathogenic bacterial aerosols produced from the municipal solid waste landfill site and its health risk assessment in the Hamadan city at west of Iran. In this study, air samples were collected every month during spring and summer at six locations including the active zone, leachate collection pond, infectious waste landfill, upwind, closure landfill, and downwind using the Andersen impactor. Spatial and seasonal variations of the potential pathogenic bacterial aerosols were detected. Also, Health risk associated were estimated based on the average daily dose rates (ADD) of exposure by inhalation. The mean concentration of potentially pathogenic bacterial aerosols were 468.7 ± 140 CFU m - 3 1108.5 ± 136.9 CFU m - 3 detected in the active zone in spring and summer, respectively. Also, there was a significant relationship between meteorological parameters and bacterial concentration (p < 0.05). The predominant potential pathogenic bacterial identified in the spring were Proteus mirabilis , Streptococcus sp., and Pseudomonas sp., while in summer were Pseudomonas sp., Staphylococcus aureus , and Escherichia coli . The hazard quotient (HQ) in both seasons were less of 1. Bacteria were spread throughout the landfill space, but their maximum density was observed around the active zone and leachate collection pond. This study highlights the importance of exposure to potential pathogenic bacterial aerosols in the summer and its adverse effects, especially in the MSW landfill site active zone. Finally, controlled exposure can reduce the health hazard caused by the potential pathogenic bacterial aerosols., Competing Interests: Conflict of interestNo conflict of interest has been reported by the authors., (© Springer Nature Switzerland AG 2021.)

The present study investigates the efficiency of a three-dimensional electro-peroxone (3D/E-peroxone) reactor filled with TiO 2 -GAC in removing diuron from aqueous solution and in the remediation of real pesticide wastewater. The behavior of the system in terms of the effect of independent variables on diuron was investigated and optimized by RSM-CCD and ANN-GA methods. Both approaches proved to have a very good performance in the modeling of the process and determined the optimum condition of the independent variables as follows: initial pH = 10, applied current = 500 mA, supporting electrolyte = 0.07 M, ozone concentration = 10 mg L -1 , and reaction time = 10 min. The 3D/E-peroxone process achieved a synergistic effect in diuron abatement and reduced significantly energy consumption, as compared to its individual components. H 2 O 2 concentration generated in the electrolysis system was notably increased in the presence of TiO 2 -GAC microparticles. The BOD 5 /COD ratio of the real pesticide wastewater increased from 0.049 to 0.571 within 90 min treatment. Giving to the considerable enhancement of the biodegradability of the wastewater, this study strongly suggests that the 3D/E-peroxone process can be considered as a promising pretreatment step before a biological treatment process to produce intermediates which are more easily degradable by microorganisms., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The present study examined the removal of bisphenol A (BPA) and total organic carbon (TOC) from aqueous solutions by the Fe/CMK-3 as peroxymonosulfate activator used in the sono-photo-catalytic process. The synthesis of Fe/CMK-3 was carried out using the co-precipitation method, and it was characterized by FTIR, XRD, BET, EDX, and TEM. The results showed that the iron nanoparticles were uniformly embedded in the CMK-3 pores. The effect of factors affecting on the removal of BPA and TOC was evaluated by response surface methodology (RSM) with center composite design (CCD). The analysis of variance of the quadratic model showed that the model is significant (p value < .0001 and R 2  > 99.4%) and can be used to optimize the removal efficiency of BPA. Optimization results showed that the highest removal efficiency of BPA (100%) and TOC (80.6%) was achieved in optimum conditions of pH 7.8, catalyst dose 0.33 g/L, PMS dose 3.35 mmol/L, BPA concentration 39.3 mg/L, and 78.5 min. In addition, statistical analysis of the data showed that, in the studied range, the initial concentration of BPA was the most influential factor, followed by pH and PMS dose. Highest catalytic stability of Fe/CMK-3 showed the potential applicability of catalyst in the treatment of BPA-containing solutions. The quenching test showed that sulfate radical was the main responsible for the removal of BPA. The decrease in I OUR value after the 75-min reaction time indicates that this process has a high ability for oxidation of the pollutant and its intermediates. Generally, the observed results suggest that the Fe-CMK-3/UV/US/PMS system can be a promising procedure for the removal of persistent pollutants such as BPA from aqueous media. PRACTITIONER POINTS: Fe/CMK-3 exhibited prominent catalytic activity and high stability for peroxymonosulfate activation. Effective degradation of bisphenol A was achieved in the Fe-CMK-3/UV/US/PMS system. The effect of five factors at five levels and their interactions during the removal of BPA was evaluated by RSM method coupled with central composite design (CCD). The analysis of variance of the quadratic model showed that the model is very significant (p value < .0001) and can be used to optimize the removal efficiency of BPA. The quenching test showed that sulfate radical was the main responsible for the removal of BPA. Reducing I OUR value after the 75-min reaction time indicates that toxicity of the solution was significantly decreased in this system., (© 2019 Water Environment Federation.)

This study aimed to compare the hematologic variables and pro-inflammatory biomarkers in urban adults living in Tabriz, Iran, facing various levels of outdoor volatile organic compounds (VOCs). Of all 219 people (212 male and 7 female), 71 were from the low traffic area and 148 were from high traffic and industrial areas. To validate the exposure levels, 93 air samples were taken to determine the target VOCs (benzene, toluene, xylenes, and styrene collectively called BTXS) concentrations in the studied areas. ANOVA and Tukey's tests were used for statistical analysis. Based on the results, significant differences were observed between the mean concentrations of BTXS with the following order of abundance: industrial > high traffic > low traffic. The Considerable decrease was observed in red blood cells (RBCs), hemoglobin, hematocrit, and eosinophils of 0.324 ( × 10 6 /μL), 0.57 g/dL, 1.87%, and 0.17 ( × 10 3 /μL), respectively in industrial area participants as compared to the low traffic area. However, a significant increase was observed in white blood cell count (WBC), neutrophils number, neutrophils percent, TNF-α and INF-γ of 0.88 ( × 10 3 /μL), 0.80 ( × 10 3 /μL), 3.53%, 34.2 ng/mL, and 40.06 ng/mL, respectively in the same groups. The comparison of low and high traffic areas showed significant differences in RBC (p = 0.034), tumor necrosis factor alpha (TNF-α) (p < 0.001), and interferon gamma (INF-γ) (p < 0.001). On the contrary, no significant difference was observed in TNF-α and INF-γ among the high traffic and industrial areas. In conclusion, the results showed that the samples from high traffic and industrial areas were regularly exposed to higher values of BTXS due to traffic and industrial pollutants as compared to the samples residing in low traffic regions. Based on the results living in both high traffic and industrial regions can increase adverse effects on hematologic parameters and pro-inflammatory cytokines., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Competing Interests: Conflict of interest The authors declare that there is no conflict of interest.

The dried bed of the world's second largest permanent Hypersaline lake, Lake Urmia, acts as a Hypersaline particle emission source. In the present study we aim to assess the health impact of this disaster and examine the association of Hypersaline particles with total and differential white blood cell counts (WBC) and homocysteine (Hcy), the biomarkers of cardiovascular diseases, in the residents around Lake Urmia. Based on the previous study three regions were selected as clean and polluted regions for ambient particulate matter (APM) from 2008 to 2015. Concentration of APM (PM 10 , PM 2.5 and PM 1 ; particulate matter with aerodynamic diameter of less than 10, 2.5 and 1 µm, respectively) was measured in the selected regions and totally, 123 participants were selected randomly from villagers who have lived in the selected regions for at least eight years. Biomarkers and covariates were measured in the selected regions and were analyzed using multiple linear regression models. We found a statistically significant association between APM and selected biomarkers (Hcy, total WBC, neutrophil, monocyte, lymphocyte and basophile) in the polluted regions. These results are consistent with our hypothesis that long-term exposure to Hypersaline particles originated from drying Urmia Hypersaline Lake is related to increased cardiovascular risk biomarkers., (Copyright © 2018 Elsevier Inc. All rights reserved.)

The effect of granular coral limestone and Leca as adsorbents for removing Acid Cyanine 5R (AC5R) from aqueous solution was studied. The optimum pH and adsorbent particles size in both adsorbents were determined to be 3 and 297 μm, respectively. The optimum dosages of coral limestone and granular Leca were 0.150 and 0.145 g/mg of dye, respectively. Also, results have shown that the adsorption efficiency by both coral limestone and Leca increased with the decreasing adsorbent particles size. Moreover, under similar conditions, the maximum removal efficiency by granular coral limestone and Leca was 94% and 88%, respectively. The results revealed that the performance of granular coral limestone was better in AC5R removal than that of Leca granulated under such condition. In total, granular coral limestone and Leca act as suitable adsorbents for removing dye pollutants from an aqueous solution.

Background: The objective of this study was to determine the residual concentrations of ethion and imidacloprid in cucumbers grown in greenhouse. The effect of some simple processing procedures on both ethion and imidacloprid residues were also studied., Methods: Ten active greenhouses that produce cucumber were randomly selected. Ethion and imidacloprid as the most widely used pesticides were measured in cucumber samples of studied greenhouses. Moreover, the effect of storing, washing, and peeling as simple processing procedures on both ethion and imidacloprid residues were investigated., Results: One hour after pesticide application; the maximum residue levels (MRLs) of ethion and imidacloprid were higher than that of Codex standard level. One day after pesticide application, the levels of pesticides were decreased about 35 and 31% for ethion and imidacloprid, respectively, which still were higher than the MRL. Washing procedure led to about 51 and 42.5% loss in ethion and imidacloprid residues, respectively. Peeling procedure also led to highest loss of 93.4 and 63.7% in ethion and imidacloprid residues, respectively. The recovery for both target analytes was in the range between 88 and 102%., Conclusion: The residue values in collected samples one hour after pesticides application were higher than standard value. The storing, washing, and peeling procedures lead to the decrease of pesticide residues in greenhouse cucumbers. Among them, the peeling procedure has the greatest impact on residual reduction. Therefore, these procedures can be used as simple and effective processing techniques for reducing and removing pesticides from greenhouse products before their consumption.

Background: Eutrophication is one of the detrimental environmental problems in water reservoirs dye to the irregular introducing nutrients (phosphorus and nitrogen). This study aimed to explore the eutrophication state of Ekbatan Reservoir, Hamadan, western Iran., Methods: Monthly sampling was conducted during April 2010 to March 2011. Seven sampling stations were selected in the various locations of the reservoir and the samples were collected in the depth of 50 cm. The grab sampling of water for nitrogen, phosphorous and chlorophyll-a was carried out at all localities by Hatch sampler. The trophic state of the dam was determined by Carlson's Trophic State Index (TSI) and Chapra's classification., Results: The highest concentrations of phosphorus and chlorophyll-a were measured in August and the lowest concentration for both of the parameters was determined in February. The TSI index according phosphorus concentration showed that the reservoir was in eutrophic status during May to November and was in mesotrophic status over November to May., Conclusions: It seems that the eutrophication process in the lake was resulted from the rural wastewaters and agricultural fertilizers. Therefore, using long term management methods including prevent of uncontrolled discharge of agricultural wastewaters is recommended in order to reduce the eutrophication in the reservoir. Decrease of phosphorus concentration in the dam by 50% can convert the eutrophic state to mesotrophic state.

Photocatalytic removal of Cr(VI) and Ni(II) from aqueous solution using synthesized nanoparticle ZnO under ultraviolet (UV) light irradiation was studied in this work. Firstly, nanoparticle ZnO was prepared by the chemical method with an organic chemical inhibitor. Then removal efficiency of Cr(VI) and Ni(II) by nanoparticle ZnO was investigated with variation of the solution pH, ZnO dosage, contact time and initial Cr(VI) and Ni(II) concentration. Maximum removal of Cr(VI) and Ni(II) was observed at near-neutral pH because the reduced photocatalytic activity of ZnO at exceedingly low and high pH values originates from either acidic/photochemical corrosion of the catalyst and/or surface passivation with Zn(OH)2. As the ZnO dosage increased, the removal efficiency of Cr(VI) and Ni(II) was continuously enhanced, but was gradually decreased above 1.25 g/l due to the increased blockage of the incident UV light used for the photocatalytic reaction. The optimum ZnO dosage was determined as 1 g/l. Removal efficiencies of Cr(VI) and Ni(II) decreased as initial Cr(VI) and Ni(II) concentration increased, due to an increased inhibition effect on the surface of ZnO resulting from the decreased reaction sites on the surface of ZnO required for the further photocatalytic reaction.

Chromium (VI) is known to be potentially carcinogenic and mutagenic in humans. A low-cost industrial solid bioadsorbent, bagasse-based activated charcoal (BAC), has been investigated for removal of chromium from aqueous solution. All the experiments were carried out in batch process with laboratory-prepared samples to study the effects of adsorbent dose, contact time, pH and initial concentration of Cr(VI). The removal of chromium ion was found to be highly dependent on the pH of the solution, adsorbent dose and contact time. Also the equilibrium adsorption was analyzed by the Freundlich and Langmuir isotherm models. It was found that the Freundlich isotherm model best described the sorption of chromium by sugar beet bagasse-based activated charcoal (r2 > 0.9927). Experimental data of kinetic studies were fitted to pseudo-first-order, pseudo-second-order and modified pseudo-first-order models. The results showed pseudo-second order kinetics was best fitted to the collected data (r2 > 0.9893). Optimum conditions for adsorption were determined at pH 2 and a contact time of 180 minutes (92.7% removal). These retention capacities suggest that BAC can provide a simple, effective, and cheap method for removing Cr(VI) ions from effluents and water resources.

Background: There are great interests in photocatalytic oxidation of contaminants using titanium dioxide in recent years. The main objective of this research was to study photocatalytic disinfection of Coliform bacteria as water microbial pollution index using TiO2 and a low pressure UV lamp in a batch reactor., Methods: The polluted water was prepared by adding a colony of Coliform in raw water and in separate stages was contacted with UV, TiO2 and combination of them and various parameters such as contact time, pH and amount of TiO2 were studied in terms of their effect on reaction progress., Results: The results showed that in simultaneous presence of both UV ray and TiO2, there was the most effective disinfection of Coliform. This study showed that 100% of Coliform was killed by irradiation for 60-75 min. in the presence of 0.8 gr l-1 TiO2 in pH=7.0., Conclusion: Based on the results, UV/TiO2 process may be effectively applied for disinfection of polluted water and can be suggested as a effective purifying method for water disinfection.

Background: The main objective of this research was to study photocatalytic oxidation of phenol in aquatic solutions by using of UV, TiO2 and the combination of them. Phenol compounds are widely used in industries and other daily life. Highly toxicity and carcinogenicity of these compounds can causal considerable adverse effects on the aquatic ecosystems and human health., Methods: The study was an experimental research and carried out by phenol 100 mg L-1 solution and contact time, pH and amount of TiO2 were considered in photocatalytic system as the basic variables affecting removal efficiencies. Phenol concentration in inlet and outlet samples was detected by spectrophotometery at 500nm., Results: Combination of UV and TiO2 can cause higher efficiencies of phenol removal. The removal efficiencies of UV, TiO2 and UV/TiO2 photocatalytic oxidation system with various operation conditions had a range of 1.8%-19.64%, 2.38%-17.8% and 34.65%-82.91%, respectively. It was found that increasing of TiO2 concentration and contact time and pH , increasing the amount of phenol that oxidized in combined system and maximum removal coefficients obtained in pH=11, 9 h contact time and 0.2 gr of TiO2., Conclusion: Combinated UV/TiO2 process may be applied as an effective process for the removal of phenol from aquatic solutions such as industrial wastewaters and polluted water resources.