Search

The final features of natural fiber composites (NFCs) depend on the integrated characteristics of their constituents. In the industry today, natural agro waste fibers are evaluated using a limited number of criteria. In this work, a combined multi-criteria evaluation stage technique (CMCEST) is introduced as a simple efficient systematic indicator to enhance evaluation of the available natural agro wastes for polymeric composites. In this proposed technique, criteria affecting the proper selection of natural agro waste fibers were combined and divided into sequence stages as follows: single-evaluation-criterion (SEC), combined-double-evaluation-criterion (CDEC), combined-triple-evaluation-criterion (CTEC), etc. These stages are based on combined physical, mechanical, and economic evaluation criteria and can be extended to several further stages to include other beneficial characteristics. The effectiveness of this technique was demonstrated by evaluating coir, date palm, jute, hemp, kenaf, and oil palm fibers simultaneously. This combined evaluation criteria can lead to more informative decisions regarding selection of the most suitable fiber type for polymeric composites. The CMCEST enhancements can reveal new potential fiber types through better evaluation schemes, help achieve clearer indications of the capabilities of available agro wastes to enhance composites, and determine proper ecological waste management practices. Utilizing the proposed technique, the date palm fiber type was found to be quite promising due to beneficial characteristics revealed in CTEC, which provides a reasonable, cheap, and eco-friendly alternative material suitable for different applications.

This study aims to determine the properties of waste betel nut husk (BNH) fiber as a potential alternative for reinforcement in polymer composites. The BNH fibres were subjected to alkali treatment using 5% sodium hydroxide. In this work, husk fibres extracted from betel nut fruit were characterized for its chemical composition, tensile properties, morphology, and interfacial shear strength. The cellulose content was increased with alkali treatment. Tensile strength and Young's modulus of BNH fibre dropped drastically with alkali treatment but with improvement in elongation at break of the fibre due to extraction of cementing materials of microfibrils in natural fibre, i.e. lignin and hemicellulose. SEM observations revealed that poor tensile strength and modulus were related to the cell wall thinning and deep pores in BNH fibre due to alkali treatment. Interfacial shear strength (IFSS) of alkali treated fibre was higher as compared to untreated BNH fibre due to the increase in fibre surface roughness with alkali treatment. [ABSTRACT FROM AUTHOR]

In this paper, Polyimide/Montmorillonite Nanocomposites (PI/MMT NCs), based on aromatic diamine (4-Aminophenyl sulfone) (APS) and aromatic dianhydride (3,3',4,4'-benzophenonetetracarboxylic dianhydride) (BTDA) were prepared using in situ polymerization and solution-dispersion techniques. The prepared PI/MMT NCs films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The XRD results showed that at the content of 1.0 wt % Organo Montmorillonite (OMMT) for two techniques and 3.0 wt % OMMT for the in situ polymerization technique, the OMMT was well-intercalated, exfoliated and dispersed into polyimide matrix. The OMMT agglomerated when its amount exceeded 10 wt % and 3.0 wt % for solution-dispersion and in situ polymerization techniques respectively. These results were confirmed by the TEM images of the prepared PI/MMT NCs. The TGA thermograms indicated that thermal stability of prepared PI/MMT NCs were increased with the increase of loading that, the effect is higher for the samples prepared by in situ polymerization technique. [ABSTRACT FROM AUTHOR]