Search

Polymers have distinctive optical properties and facile fabrication methods that have been well-established. Therefore, they have immense potential for nanophotonic devices. Here, we demonstrate the temperature-sensing potential of SU8-meta-phenylenediamine (SU8-mPD), produced by epoxy amination of the SU-8 polymer. Its properties were examined through a series of molecular structural techniques and optical methods. Thin layers have demonstrated optical emission and absorption in the visible range around 420 and 520 nm, respectively, alongside a strong thermal responsivity, characterized by the 18 ppm °C -1 expansion coefficient. A photonic chip, comprising a thin 5-10 μm SU8-mPD layer, encased between parallel silver and/or gold thin film mirrors, has been fabricated. When pumped by an external light source, this assembly generates a pronounced fluorescent signal that is superimposed with the Fabry-Pérot (FP) resonant response. The chip undergoes mechanical deformation in response to temperature changes, thereby shifting the FP resonance and encoding temperature information into the fluorescence output spectrum. The time response of the device was estimated to be below 1 s for heating and a few seconds for cooling, opening a new avenue for optical sensing using SU8-based polymers. Thermoresponsive resonant structures, encompassing strong tunable fluorescent properties, can further enrich the functionalities of nanophotonic polymer-based platforms. This article is part of the theme issue 'Celebrating the 15th anniversary of the Royal Society Newton International Fellowship'.

The large mid-infrared (MIR) spectral region, ranging from 2.5 µm to 25 µm, has remained under-exploited in the electromagnetic spectrum, primarily due to the absence of viable transceiver technologies. Notably, the 8-14 µm long-wave infrared (LWIR) atmospheric transmission window is particularly suitable for free-space optical (FSO) communication, owing to its combination of low atmospheric propagation loss and relatively high resilience to turbulence and other atmospheric disturbances. Here, we demonstrate a direct modulation and direct detection LWIR FSO communication system at 9.1 µm wavelength based on unipolar quantum optoelectronic devices with a unprecedented net bitrate exceeding 55 Gbit s -1 . A directly modulated distributed feedback quantum cascade laser (DFB-QCL) with high modulation efficiency and improved RF-design was used as a transmitter while two high speed detectors utilizing meta-materials to enhance their responsivity are employed as receivers; a quantum cascade detector (QCD) and a quantum-well infrared photodetector (QWIP). We investigate system tradeoffs and constraints, and indicate pathways forward for this technology beyond 100 Gbit s -1 communication., (© 2024. The Author(s).)

Hollow core fibers, supporting waveguiding in a void, open a room of opportunities for numerous applications owing to an extended light-matter interaction distance and relatively high optical confinement. Decorating an inner capillary with functional materials allows tailoring the fiber's optical properties further and turns the structure into a functional device. Here, we functionalize an anti-resonant hollow-core fiber with 18 nm-size gold nanoparticles, approaching a uniform 45% surface coverage along 10 s of centimeters along its inner capillary. Owing to a moderately low overlap between the fundamental mode and the gold layer, the fiber maintains its high transmission properties; nevertheless, the entire structure experiences considerable heating, which is observed and quantified with the aid of a thermal camera. The hollow core and the surrounding capillary are subsequently filled with ethanol and thermo-optical heating is demonstrated. We also show that at moderate laser intensities, the liquid inside the fiber begins to boil and, as a result, the optical guiding is destroyed. The gilded hollow core fiber and its high thermal-optical responsivity suggest considering the structure as an efficient optically driven catalytic reactor in applications where either small reaction volumes or remote control over a process are demanded.

The SU8 polymer is a negative photoresist widely used to produce high-quality coatings, with controllable thicknesses ranging from nanometers to millimeters, depending on fabrication protocols. Apart from conventional use cases in microelectronics and fluidics, SU8 is quite an attractive platform in nanophotonics. This material, being straightforwardly processed by ultraviolet lithography, is transparent to wavelengths longer than 500 nm. However, introducing fluorescent agents within the SU8 matrix remains a challenge owing to its high hydrophobicity. Here, we develop a process, where colorful quantum dots co-participate in the polymerization process by epoxide amination and become a part of a new fluorescent material - SU8-phenylenediamine. Through comprehensive characterization methods, including XPS and 1 H-NMR analyses, we demonstrate that m -PD covalently binds to SU8 epoxy sites with its molecular amine, virtually forming a new material and not just a mixture of two compounds. After characterizing the new strongly fluorescent platform, thin 300 nm films were created on several surfaces, including a conformal coverage of a nanofluidic capillary. This new process provides opportunities to incorporate various functional molecules into optoelectronic devices without the need for multistep deposition and surface functionalization.

Quantum dots can modify the properties of the whispering gallery mode resonators (WGMRs) used in various potential applications. A deposition of a suitable nanomaterial for the surface functionalization of WGMRs allows for the achievement of high quality (Q) factors. Here, we show that the WGMR surface can be functionalized using quantum dots. We demonstrate that WGMRs covered with thin layers of HgS and PbS quantum dots are suitable for third-harmonic generation due to the high Q factor of the developed microresonators, thus significantly lowering the pumping power required for nonlinear optical interactions.

Conventional data center interconnects rely on power-hungry arrays of discrete wavelength laser sources. However, growing bandwidth demand severely challenges ensuring the power and spectral efficiency toward which data center interconnects tend to strive. Kerr frequency combs based on silica microresonators can replace multiple laser arrays, easing the pressure on data center interconnect infrastructure. Therefore, we experimentally demonstrate a bit rate of up to 100 Gbps/λ employing 4-level pulse amplitude modulated signal transmission over a 2 km long short-reach optical interconnect that can be considered a record using any Kerr frequency comb light source, specifically based on a silica micro-rod. In addition, data transmission using the non-return to zero on-off keying modulation format is demonstrated to achieve 60 Gbps/λ. The silica micro-rod resonator-based Kerr frequency comb light source generates an optical frequency comb in the optical C-band with 90 GHz spacing between optical carriers. Data transmission is supported by frequency domain pre-equalization techniques to compensate amplitude-frequency distortions and limited bandwidths of electrical system components. Additionally, achievable results are enhanced with offline digital signal processing, implementing post-equalization using feed-forward and feedback taps.

An optical amplification-free deep reservoir computing (RC)-assisted high-baudrate intensity modulation direct detection (IM/DD) system is experimentally demonstrated using a 100G externally modulated laser operated in C-band. We transmit 112 Gbaud 4-level pulse amplitude modulation (PAM4) and 100 Gbaud 6-level PAM (PAM6) signals over a 200-m single-mode fiber (SMF) link without any optical amplification. The decision feedback equalizer (DFE), shallow RC, and deep RC are adopted in the IM/DD system to mitigate impairment and improve transmission performance. Both PAM transmissions over a 200-m SMF with bit error rate (BER) performance below 6.25% overhead hard-decision forward error correction (HD-FEC) threshold are achieved. In addition, the BER of the PAM4 signal is below the KP4-FEC limit after 200-m SMF transmission enabled by the RC schemes. Thanks to the use of a multiple-layer structure, the number of weights in deep RC has been reduced by approximately 50% compared with the shallow RC, whereas the performance is comparable. We believe that the optical amplification-free deep RC-assisted high-baudrate link has a promising application in intra-data center communications.

High bitrate mid-infrared links using simple (NRZ) and multi-level (PAM-4) data coding schemes have been realized in the 8 µm to 14 µm atmospheric transparency window. The free space optics system is composed of unipolar quantum optoelectronic devices, namely a continuous wave quantum cascade laser, an external Stark-effect modulator and a quantum cascade detector, all operating at room-temperature. Pre- and post-processing are implemented to get enhanced bitrates, especially for PAM-4 where inter-symbol interference and noise are particularly detrimental to symbol demodulation. By exploiting these equalization procedures, our system, with a full frequency cutoff of 2 GHz, has reached transmission bitrates of 12 Gbit/s NRZ and 11 Gbit/s PAM-4 fulfilling the 6.25 % overhead hard-decision forward error correction threshold, limited only by the low signal-to-noise ratio of our detector.

The fabrication of microsphere resonators and the generation of optical frequency combs (OFC) have achieved a significant breakthrough in the past decade. Despite these advances, no studies have reported the experimental implementation and demonstration of silica microsphere OFCs for data transmission. In this work, to the best of our knowledge, we experimentally for the first time present a designed silica microsphere whispering-gallery-mode microresonator (WGMR) OFC as a C-band light source where 400 GHz spaced carriers provide data transmission of up to 10 Gbps NRZ-OOK modulated signals over the standard ITU-T G.652 telecom fiber span of 20 km in length. A proof-of-concept experiment is performed with two newly generated carriers (from 7-carrier OFC) having the highest peak power. The experimental realization is also strengthened by the modeling and simulations of the proposed system showing a strong match of the results. The demonstrated setup serves as a platform for the future experimental implementation of silica microsphere WGMR-OFC in more complex WDM transmission system realizations with advanced modulation schemes.