Search

The aim of this study was to develop a novel biodegradable magnesium (Mg) alloy for bone implant applications. We used scandium (Sc; 2 wt %) and strontium (Sr; 2 wt %) as alloying elements due to their high biocompatibility, antibacterial efficacy, osteogenesis, and protective effects against corrosion. In the present work, we also examined the effect of a heat treatment process on the properties of the Mg-Sc-Sr alloy. Alloys were manufactured using a metal casting process followed by heat treatment. The microstructure, corrosion, mechanical properties, antibacterial activity, and osteogenic activity of the alloy were assessed in vitro. The results showed that the incorporation of Sc and Sr elements controlled the corrosion, reduced the hydrogen generation, and enhanced mechanical properties. Furthermore, alloying with Sc and Sr demonstrated a significantly enhanced antibacterial activity and decreased biofilm formation compared to control Mg. Also, culturing Mg-Sc-Sr alloy with human bone marrow-derived mesenchymal stromal cells showed a high degree of biocompatibility (>90% live cells) and a significant increase in osteoblastic differentiation in vitro shown by Alizarin red staining and alkaline phosphatase activity. Based on these results, the Mg-Sc-Sr alloy heat-treated at 400°C displayed optimal mechanical properties, corrosion rate, antibacterial efficacy, and osteoinductivity. These characteristics make the Mg-Sc-Sr alloy a promising candidate for biodegradable orthopedic implants in the fixation of bone fractures such as bone plate-screws or intramedullary nails., (© 2022 Wiley Periodicals LLC.)

Diseases affecting the retina, such as age-related macular degeneration (AMD), diabetic retinopathy, macular edema, and retinal vein occlusions, are currently treated by the intravitreal injection of drug formulations. These disease pathologies are driven by oxidative damage due to chronic high concentrations of reactive oxygen species (ROS) in the retina. Intravitreal injections often induce retinal detachment, intraocular hemorrhage, and endophthalmitis. Furthermore, the severe eye pain associated with these injections lead to patient noncompliance and treatment discontinuation. Hence, there is a critical need for the development of a noninvasive therapy that is effective for a prolonged period for treating retinal diseases. In this study, we developed a noninvasive cerium oxide nanoparticle (CNP) delivery wafer (Cerawafer) for the modulation of ROS in the retina. We fabricated Cerawafer loaded with CNP and determined its SOD-like enzyme-mimetic activity and ability to neutralize ROS generated in vitro. We demonstrated Cerawafer's ability to deliver CNP in a noninvasive fashion to the retina in healthy mouse eyes and the CNP retention in the retina for more than a week. Our studies have demonstrated the in vivo efficacy of the Cerawafer to modulate ROS and associated down-regulation of VEGF expression in the retinas of very-low-density lipoprotein receptor knockout (vldlr-/-) mouse model. The development of a Cerawafer nanotherapeutic will fulfill a hitherto unmet need. Currently, there is no such therapeutic available, and the development of a Cerawafer nanotherapeutic will be a major advancement in the treatment of retinal diseases.

The disability, mortality and costs due to ionizing radiation (IR)-induced osteoporotic bone fractures are substantial and no effective therapy exists. Ionizing radiation increases cellular oxidative damage, causing an imbalance in bone turnover that is primarily driven via heightened activity of the bone-resorbing osteoclast. We demonstrate that rats exposed to sublethal levels of IR develop fragile, osteoporotic bone. At reactive surface sites, cerium ions have the ability to easily undergo redox cycling: drastically adjusting their electronic configurations and versatile catalytic activities. These properties make cerium oxide nanomaterials fascinating. We show that an engineered artificial nanozyme composed of cerium oxide, and designed to possess a higher fraction of trivalent (Ce 3+ ) surface sites, mitigates the IR-induced loss in bone area, bone architecture, and strength. These investigations also demonstrate that our nanozyme furnishes several mechanistic avenues of protection and selectively targets highly damaging reactive oxygen species, protecting the rats against IR-induced DNA damage, cellular senescence, and elevated osteoclastic activity in vitro and in vivo . Further, we reveal that our nanozyme is a previously unreported key regulator of osteoclast formation derived from macrophages while also directly targeting bone progenitor cells, favoring new bone formation despite its exposure to harmful levels of IR in vitro . These findings open a new approach for the specific prevention of IR-induced bone loss using synthesis-mediated designer multifunctional nanomaterials., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

Diabetic wounds represent a significant healthcare burden and are characterized by impaired wound healing due to increased oxidative stress and persistent inflammation. We have shown that CNP-miR146a synthesized by the conjugation of cerium oxide nanoparticles (CNP) to microRNA (miR)-146a improves diabetic wound healing. CNP are divalent metal oxides that act as free radical scavenger, while miR146a inhibits the pro-inflammatory NFκB pathway, so CNP-miR146a has a synergistic role in modulating both oxidative stress and inflammation. In this study, we define the mechanism(s) by which CNP-miR146a improves diabetic wound healing by examining immunohistochemical and gene expression analysis of markers of inflammation, oxidative stress, fibrosis, and angiogenesis. We have found that intradermal injection of CNP-miR146a increases wound collagen, enhances angiogenesis, and lowers inflammation and oxidative stress, ultimately promoting faster closure of diabetic wounds., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Nowadays, most of the country switched to generate their power by renewable energy sources as well as the power industries also mainly focused on the renewable resources for power generation. The renewable resources are solar, wind, biomass, and hydroelectric; out of these, the solar market is developing due to shortage of non-renewable resources. The solar energy is freely obtainable during the year; also, it provides a clean and noiseless environment. Most of the large- and small-scale industries and household consumers moved to generate the power through a PV solar cell. Most of the research work includes the modelling of the PV solar cell based on their requirement in a one-diode model. In this article, a detailed study is provided about the circuit-based single-diode solar cell (SCSC) model and double-diode solar cell (DDSC) with different conditions done in MATLAB/Simulink. Both the SDSC and DDSC models are tested with different values of temperature, irradiation, and shunt resistance. This work helps the researchers study V-I and P-V characteristics of the PV solar cell clearly with different conditions. The outputs of SDSC and DDSC models are compared with simulation outputs. Effect of partial shading is also discussed to get a better idea., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

To avoid aging and ultraviolet mediated skin disease the cell repair machinery must work properly. Neutrophils, also known as polymorphonuclear leukocytes, are the first and most abundant cell types which infiltrate sites of irradiation and play an important role in restoring the microenvironment homeostasis. However, the infiltration of neutrophils in ultraviolet-B (UV-B) irradiated skin might also contribute to the pathophysiology of skin disease. The polymorphonuclear leukocytes activation induced by UV-B exposure may lead to prolonged, sustained NADPH oxidase activation followed by an increase in reactive oxygen species (ROS) production. Our previous work showed that cerium oxide nanoparticles can protect L929 fibroblasts from ultraviolet-B induced damage. Herein, we further our investigation of engineered cerium oxide nanoparticles (CNP) in conferring radiation protection specifically in modulation of neutrophils' oxidative response under low dose of UV-B radiation. Our data showed that even low doses of UV-B radiation activate neutrophils' oxidative response and that the antioxidant, ROS-sensitive redox activities of engineered CNPs are able to inhibit the effects of NADPH oxidase activation while conferring catalase and superoxide dismutase mimetic activity. Further, our investigations revealed similar levels of total ROS scavenging for both CNP formulations, despite substantial differences in cerium redox states and specific enzyme-mimetic reaction activity. We therefore determine that CNP activity in mitigating the effects of neutrophils' oxidative response, through the decrease of ROS and of cell damage such as chromatin condensation, suggests potential utility as a radio-protectant/therapeutic against UV-B damage., (© 2021 Wiley Periodicals LLC.)

Many studies have linked reactive oxygen species (ROS) to various diseases. Biomedical research has therefore sought a way to control and regulate ROS produced in biological systems. In recent years, cerium oxide nanoparticles (nanoceria, CNPs) have been pursued due to their ability to act as regenerative ROS scavengers. In particular, they are shown to have either superoxide dismutase (SOD) or catalase mimetic (CAT) potential depending on the ratio of Ce 3+ /Ce 4+ valence states. Moreover, it has been demonstrated that SOD mimetic activity can be diminished by the presence of phosphate, which can be a problem given that many biological systems operate in a phosphate-rich environment. Herein, we report a CNP formulation with both SOD and catalase mimetic activity that is preserved in a phosphate-rich media. Characterization demonstrated a highly dispersed, stable solution of uniform-sized, spherical-elliptical shaped CNP of 12 ± 2 nm, as determined through dynamic light scattering, zeta potential, and transmission electron microscopy. Mixed valence states of Ce ions were observed via UV/Visible spectroscopy and XPS (Ce 3+ /Ce 4+  > 1) (Ce 3+ ∼ 62%). X-ray diffraction and XPS confirmed the presence of oxygen-deficient cerium oxide (CeO 2-x ) particles. Finally, the CNP demonstrated very good biocompatibility and efficient reduction of hydrogen peroxide under in-vitro conditions.

The presence of excess fluoride (F - > 1.5 mg/L) in drinking water affects more than 260 million people globally and leads to dental and skeletal fluorosis among other health problems. This study investigated fluoride removal by graphene oxide-ceria nanohybrid (GO-CeO 2 ) and elucidated the mechanisms involved. The nanohybrid exhibited ultra-rapid kinetics for fluoride removal and the equilibrium (85% removal, 10 mg F - /L initial concentration) was achieved within 1 min which is one of the fastest kinetics for fluoride removal reported so far. Fluoride removal by the nanohybrid followed Langmuir isotherm with a maximum adsorption capacity of 8.61 mg/g at pH 6.5 and that increased to 16.07 mg/g when the pH was lowered to 4.0. Based on the experimental results and characterization data, we have postulated that both electrostatic interaction and surface complexation participated in the fluoride removal process. The O 2- ions present in the CeO 2 lattice were replaced by F - ions to make a coordination compound (complex). While both Ce 4+ and Ce 3+ were present in ceria nanoparticles (CeO 2 NPs), Ce 3+ participated in fluoride complexation. During fluoride removal by GO-CeO 2 , the GO sheets acted as electron mediators and help to reduce Ce 4+ to Ce 3+ at the CeO 2 NPs-GO interface, and the additional Ce 3+ enhanced fluoride removal by the nanohybrid., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Herceptin-resistant tumor relapse remains a major clinical issue responsible for the poor prognosis of HER2 + breast cancer. Understanding the underlying mechanisms and finding a therapeutic solution are of paramount urgency to improve the patient management. Here we report that anticancer redox active cerium oxide nanoparticles (CONPs) can potently sensitize the cancer cells to the cytotoxicity of Herceptin. By comparing between Herceptin-sensitive and Herceptin-resistant human breast cancer cell lines under normoxic as well as hypoxic culture conditions, we found that in the presence of CONPs, Herceptin can kill the Herceptin-resistant cells equally effectively as it kills the Herceptin-sensitive cells under the hypoxic, but not normoxic, culture conditions by inhibiting the cell viability, survival and proliferation. Signaling analysis reveals that under the normoxic conditions, the levels of hypoxia induced factor 1α as well as vascular endothelial growth factor are higher in the Herceptin-resistant cells than that in the Herceptin-sensitive cells and are strongly induced once the culture is switched to the hypoxic conditions, which can be potently suppressed by CONPs. Treatment with CONPs plus Herceptin significantly slows down the primary tumor growth and lung metastasis of the Herceptin-resistant cells in a xenograft mouse model of orthotopic breast cancer through inhibiting the cell proliferation and survival as well as tumor angiogenesis. These results shed new lights on the mechanisms underlying the Herceptin resistance of the HER2 + breast cancer and provide insights into introducing CONPs-like agents to Herceptin-based therapy to improve treatment outcomes., Competing Interests: None., (AJCR Copyright © 2021.)

The COVID19 pandemic has brought global attention to the threat of emerging viruses and to antiviral therapies, in general. In particular, the high transmissibility and infectivity of respiratory viruses have been brought to the general public's attention, along with the need for highly effective antiviral and disinfectant materials/products. This study has developed two distinct silver-modified formulations of redox-active nanoscale cerium oxide (AgCNP1 and AgCNP2). The formulations show specific antiviral activities toward tested OC43 coronavirus and RV14 rhinovirus pathogens, with materials characterization demonstrating a chemically stable character for silver nanophases on ceria particles and significant differences in Ce 3+ /Ce 4+ redox state ratio (25.8 and 53.7% Ce 3+ for AgCNP1 & 2, respectively). In situ electrochemical studies further highlight differences in formulation-specific viral inactivation and suggest specific modes of action. Altogether, the results from this study support the utility of AgCNP formulations as high stability, high efficacy materials for use against clinically relevant virus species.

Laboratory and experimental scale manufacturing processes are limited by human error (e.g., poor control over motion and personal subjectivity), especially under fatiguing conditions involving precise, repetitive operations, incurring compounding errors. Commercial layer-by-layer (LbL) automation devices are prohibitively high-priced (especially for academic institutions) with limited flexibility in form factor and potentially software-associated constraints/limitations. In this work, a novel automated multi-beaker dip coater was fabricated to facilitate nano cerium oxide/polymer coatings via an LbL dip coating process and the synthesis of nano ceria films via a novel successive ionic layer adsorption and reaction method on a glass substrate. Automation of tasks, such as those mediating the detailed procedures, is essential in producing highly reproducible, consistent products/materials as well as in reducing the time commitments for laboratory researchers. Herein, we detail the construction of a relatively large, yet inexpensive, LbL coating instrument that can operate over 90 cm in the horizontal axis, allowing, for example, up to eight 200 ml beakers with accompanying stir plates. The instrument is operated by simple "off-the-shelf" electronics to control the path and timing of the samples with open-source software while providing precision at ±0.01 mm. Furthermore, 3D-printed components were used to maximize the number of substrates that could be coated simultaneously, further improving the sample production rate and reducing waste. Further possibilities for automation beyond the detailed device are provided and discussed, including software interfaces, physical control methods, and sensors for data collection/analysis or for triggers of automated tasks.

Increased bone loss and risk of fracture are two of the main challenges for cancer patients who undergo ionizing radiation (IR) therapy. This decline in bone quality is in part, caused by the excessive and sustained release of reactive oxygen species (ROS). Cerium oxide nanoparticles (CeONPs) have proven antioxidant and regenerative properties and the purpose of this study was to investigate the effect of CeONPs in reducing IR-induced functional damage in human bone marrow-derived mesenchymal stromal cells (hBMSCs). hBMSCs were supplemented with CeONPs at a concentration of either 1 or 10 μg/mL 24 h prior to exposure to a single 7 Gy irradiation dose. ROS levels, cellular proliferation, morphology, senescence, DNA damage, p53 expression and autophagy were evaluated as well as alkaline phosphatase, osteogenic protein gene expression and bone matrix deposition following osteogenic differentiation. Results showed that supplementation of CeONPs at a concentration of 1 μg/mL reduced cell senescence and significantly augmented cell autophagy (p = 0.01), osteogenesis and bone matrix deposition >2-fold (p = 0.0001) while under normal, non-irradiated culture conditions. Following irradiation, functional damage was attenuated and CeONPs at both 1 or 10 μg/mL significantly reduced ROS levels (p = 0.05 and 0.001 respectively), DNA damage by >4-fold (p < 0.05) while increasing autophagy >3.5-fold and bone matrix deposition 5-fold (p = 0.0001 in both groups). When supplemented with 10 μg/mL, p53 expression increased 3.5-fold (p < 0.05). We conclude that cellular uptake of CeONPs offered a significant, multifunctional and protective effect against IR-induced cellular damage while also augmenting osteogenic differentiation and subsequent new bone deposition. The use of CeONPs holds promise as a novel multifunctional therapeutic strategy for irradiation-induced bone loss., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Acute respiratory distress syndrome (ARDS) is a devastating pulmonary disease with significant in-hospital mortality and is the leading cause of death in COVID-19 patients. Excessive leukocyte recruitment, unregulated inflammation, and resultant fibrosis contribute to poor ARDS outcomes. Nanoparticle technology with cerium oxide nanoparticles (CNP) offers a mechanism by which unstable therapeutics such as the anti-inflammatory microRNA-146a can be locally delivered to the injured lung without systemic uptake. In this study, we evaluated the potential of the radical scavenging CNP conjugated to microRNA-146a (termed CNP-miR146a) in preventing acute lung injury (ALI) following exposure to bleomycin. We have found that intratracheal delivery of CNP-miR146a increases pulmonary levels of miR146a without systemic increases, and prevents ALI by altering leukocyte recruitment, reducing inflammation and oxidative stress, and decreasing collagen deposition, ultimately improving pulmonary biomechanics., (Published by Elsevier Inc.)

Oxidative stress increases bone loss and limits repair, in part, through immunoregulation and the formation and maintenance of low-grade chronic inflammation. The aim of this study was to investigate the effect of cerium oxide nanoparticles (CeONPs) on (i) macrophage phenotype and cytokine expression under normal and simulated acute and chronic inflammatory conditions and, (ii) human mesenchymal stem cell (hBMSCs) proliferation, osteoinduction and osteogenic differentiation. Spherical particles composed of 60% Ce 3+ with a hydrodynamic size of ~35 nm and surface charge of 25.4 mV were internalized within cells. Under both acute and chronic conditions, inducible nitric oxide synthase (iNOS) activity decreased with a significant reduction seen in the 1 and 10 μg/mL groups (p < 0.001). A dose dependent and significant increase in anti-inflammatory cytokine gene expression was observed in all CeONP groups under chronic inflammatory condition. No increase in alkaline phosphatase (ALP) activity or mineral deposits were measured following hBMSCs cultured without osteogenic media in any of the CeONP groups, however, a significant increase in osteogenic-related gene expression, ALP activity and bone mineral deposits was measured when supplemented with both CeONPs and osteogenic media. CeONP activity was multifaceted and exhibited low toxicity. A therapeutic dose of 1 μg/mL delivered a disparate but protective effect when under both acute and chronic inflammatory conditions while at the same dose, potentiated osteogenesis., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Hypothesis: Broad-spectrum antimicrobials are needed to mitigate the complicated nature of antibiotic-resistant infections. It is imperative to formulate new antimicrobials by combining agents with different mechanisms and broader microbial targets. A combined antimicrobial solution could be a highly critical step towards developing a strategy to prevent polymicrobial infections. Herein, we have investigated the interaction and antimicrobial potential of a solution that contains cerium oxide nanoparticles (CNP) and a nitric oxide (NO) donor, S-nitroso-N-acetylpenicillamine (SNAP). It is hypothesized that these two agents induce synergistic effects and would provide broad antimicrobial effects since CNP is known to be an effective antifungal agent while NO released by SNAP is known to be a potent bactericidal agent., Experiments: Different concentrations of SNAP and CNP were combined in a solution and tested for colloidal stability, NO release, mammalian cell cytotoxicity, and antimicrobial efficacy against Staphylococcus aureus, Escherichia coli, and Candida albicans, accounting for Gram-positive bacteria, Gram-negative bacteria, and fungi, respectively., Findings: SNAP and CNP combined in equimolar solution of 3 mM were found to be highly virulent for all microbes tested compared to higher amounts of the treatments required individually. These results hold a promising outlook toward the development of broad-spectrum antimicrobial coatings and films with the potential to prevent polymicrobial infections and further enhance biomedical device usage and applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Wound healing is of major clinical concern and is constantly being explored for early restoration and enhanced recovery. While the etiology of the wound healing is multifactorial, high inflammation and increased oxidative stress which results in chronic inflammation, endothelial dysfunction and collagen degradation, delay the overall healing process. Thus, visual sensing of the oxidative stress would be highly informative in the successful implementation of wound healing therapies based on specific requirements. In this study, electrospinning was used to fabricate silk fibroin nanofibrous mats infused with Amplex red capable of detecting hydrogen peroxide, a reactive oxygen molecule. These mats produced a visible change in color with the limit of detection at 1 μM H 2 O 2 concentration. In vivo studies carried out in diabetic mice with impaired wounds also displayed a visible change in color of the mats infused with Amplex red within 24 hours. These electrospun silk fibroin nanofibrous Amplex infused mats has the potential to enable a futuristic platform where decisions can be made for enhanced wound healing therapy.

Diabetes mellitus is a metabolic disorder associated with properties and an increased risk of chronic wounds due to sustained pro-inflammatory response. We have previously of radical scavenging cerium oxide nanoparticles (CNP) conjugated to the anti-inflammatory microRNA (miR)-146a, termed CNP-miR146a, improves diabetic wound healing by synergistically lowering oxidative stress and inflammation, and we sought to evaluate this treatment in a topical application. Silk fibroin is a biocompatible polymer that can be fabricated into nanostructures, termed nanosilk. Nanosilk is characterized by a high strength-to-density ratio and an ability to exhibit strain hardening. We therefore hypothesized that nanosilk would strengthen the biomechanical properties of diabetic skin and that nanosilk solution could effectively deliver CNP-miR146a to improve diabetic wound healing. The ability of nanosilk to deliver CNP-miR146a to murine diabetic wounds and improve healing was assessed by the rate of wound closure and inflammatory gene expression, as well as histologic analysis. The effect of nanosilk on the properties of human diabetic skin was evaluated by testing the biomechanical properties following topical application of a 7% nanosilk solution. Diabetic murine wounds treated with topical nanosilk and CNP-miR146a healed by day 14.5 compared to day 16.8 in controls (p = 0.0321). Wounds treated with CNP-miR146a had higher collagen levels than controls (p = 0.0126) with higher pro-fibrotic gene expression of TGFβ-1 (p = 0.0092), Col3α1 (p = 0.0369), and Col1α2 (p = 0.0454). Treatment with CNP-miR146a lowered pro-inflammatory gene expression of IL-6 (p = 0.0488) and IL-8 (p = 0.0009). Treatment of human diabetic skin with 7% nanosilk solution resulted in significant improvement in maximum load and modulus (p < 0.05). Nanosilk solution is able to strengthen the biomechanical properties of diabetic skin and can successfully deliver CNP-miR146a to improve diabetic wound healing through inhibition of pro-inflammatory gene signaling and promotion of pro-fibrotic processes., (Copyright © 2020 Niemiec, Louiselle, Hilton, Dewberry, Zhang, Azeltine, Xu, Singh, Sakthivel, Seal, Liechty and Zgheib.)

Effectively controlling vector mosquito populations while avoiding the development of resistance remains a prevalent and increasing obstacle to integrated vector management. Although, metallic nanoparticles have previously shown promise in controlling larval populations via mechanisms which are less likely to spur resistance, the impacts of such particles on life history traits and fecundity of mosquitoes are understudied. Herein, we investigate the chemically well-defined cerium oxide nanoparticles (CNPs) and silver-doped nanoceria (AgCNPs) for larvicidal potential and effects on life history traits and fecundity of Aedes (Ae.) aegypti mosquitoes. When 3rd instar larvae were exposed to nanoceria in absence of larval food, the mortality count disclosed significant activity of AgCNPs over CNPs (57.8±3.68% and 17.2±2.81% lethality, respectively) and a comparable activity to Ag+ controls (62.8±3.60% lethality). The surviving larvae showed altered life history traits (e.g., reduced egg hatch proportion and varied sex ratios), indicating activities of these nanoceria beyond just that of a larvicide. In a separate set of experiments, impacts on oocyte growth and egg generation resulting from nanoceria-laced blood meals were studied using confocal fluorescence microscopy revealing oocytes growth-arrest at 16-24h after feeding with AgCNP-blood meals in some mosquitoes, thereby significantly reducing average egg clutch. AgCNPs caused ~60% mortality in 3rd instar larvae when larval food was absent, while CNPs yielded only ~20% mortality which contrasts with a previous report on green-synthesized nanoceria and highlights the level of detail required to accurately report and interpret such studies. Additionally, AgCNPs are estimated to contain much less silver (0.22 parts per billion, ppb) than the amount of Ag+ needed to achieve comparable larvicidal activity (2.7 parts per million, ppm), potentially making these nanoceria ecofriendly. Finally, this work is the first study to demonstrate the until-now-unappreciated impacts of nanoceria on life history traits and interference with mosquito egg development., Competing Interests: The authors have declared that no competing interests exist.

Exposure to ultraviolet radiation is a major contributor to premature skin aging and carcinogenesis, which is mainly driven by overproduction of reactive oxygen species (ROS). There is growing interest for research on new strategies that address photoaging prevention, such as the use of nanomaterials. Cerium oxide nanoparticles (nanoceria) show enzyme-like activity in scavenging ROS. Herein, our goal was to study whether under ultraviolet A rays (UVA)-induced oxidative redox imbalance, a low dose of nanoceria induces protective effects on cell survival, migration, and proliferation. Fibroblasts cells (L929) were pretreated with nanoceria (100 nM) and exposed to UVA radiation. Pretreatment of cells with nanoceria showed negligible cytotoxicity and protected cells from UVA-induced death. Nanoceria also inhibited ROS production immediately after irradiation and for up to 48 h and restored the superoxide dismutase (SOD) activity and GSH level. Additionally, the nanoceria pretreatment prevented apoptosis by decreasing Caspase 3/7 levels and the loss of mitochondrial membrane potential. Nanoceria significantly improved the cell survival migration and increased proliferation, over a 5 days period, as compared with UVA-irradiated cells, in wound healing assay. Furthermore, it was observed that nanoceria decreased cellular aging and ERK 1/2 phosphorylation. Our study suggests that nanoceria might be a potential ally to endogenous, antioxidant enzymes, and enhancing the redox potentials to fight against UVA-induced photodamage and consequently modulating the cells survival, migration, and proliferation., (Copyright © 2020 Ribeiro, de Oliveira, Singh, Sakthivel, Neal, Seal, Ueda-Nakamura, Lautenschlager and Nakamura.)

Iron (Fe)-based adsorbents have been promoted for aqueous arsenic adsorption because of their low cost and potential ease of scale-up in production. However, their field application is, so far, limited because of their low Fe use efficiency (i.e., not all available Fe is used), slow adsorption kinetics, and low adsorption capacity. In this study, we synthesized graphene oxide iron nanohybrid (GFeN) by decorating iron/iron oxide (Fe/Fe x O y ) core-shell structured iron nanoparticles (FeNPs) on the surface of graphene oxide (GO) via a sol-gel process. The deposition of FeNPs on GO for the nanohybrid (GFeN) improves Fe use efficiency and arsenic mobility in the nanohybrid, thereby improving the arsenic removal capacity and kinetics. We achieved removal capacities of 306 mg/g for As(III) and 431 mg/g for As(V) using GFeN. Rapid reduction (>99% in <10 min) of As(III) and As(V) (initial concentration, C 0  = 100 μg/L) was achieved with the nanohybrid (250 mg/L). There were no significant interferences by the coexisting anions and organic matters at environmentally relevant concentrations. Based on the experimental data, we have proposed that both electrostatic interaction and surface complexation contributed to ultra-high arsenic removal by GFeN. The GO sheets acted as the reservoirs for the electrons released during surface corrosion of the FeNPs and the electrons were transferred back to the FeNPs to rejuvenate the oxidized surface. The rejuvenated FeNP surface layer helped in additional arsenic removal., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The Ultraviolet-B radiation (UVB) might induce cellular redox imbalance which plays an important role in the development of skin disorders. Thus, the search for photochemoprotective alternatives with antioxidant efficacy would be a safe aspect towards prevention of skin diseases. Cerium oxide nanoparticles (CNPs) have antioxidant properties, that are mostly related to CNPs catalase and superoxide dismutase (SOD)-like antioxidative mimetic activity. Considering that, we investigated whether CNPs induce photochemoprotection against UVB-induced cellular damages on L929 fibroblasts. Our results showed that CNPs prevented UVB mediated L929 cell oxidative damage by reestablishing the oxidative balance through ameliorating the reactive oxygen species (ROS) level and enhancing the antioxidant enzyme activities., Competing Interests: Declaration of Competing Interest The authors declare that there is no conflict of interest regarding the publication of this article., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Nanocrystalline cerium oxide (nanoceria) is a rare earth oxide with a complex surface chemistry. This material has seen substantial investigation in recent years in both fundamental and applied studies due largely to more precise characterization of the unique surface structures, which mediate its pronounced redox activity. In particular, oxygen storage/buffering capacities have been thoroughly correlated with synthesis and processing condition effects on other material features such as surface (micro-) faceting, reconstruction, and (extent of) hydration. Key material features such as these modulate nanoceria redox performance by changing the crystal microenvironment. In this review, we present nanoengineering methods, which have produced increased nanoceria performance in biomedical, energy, and catalysis applications. The impact of combined/cooperative theoretical and experimental studies are highlighted throughout.

A room temperature amorphous ferromagnetic oxide semiconductor can substantially reduce the cost and complexity associated with utilizing crystalline materials for spintronic devices. We report a new material (Fe 0.66 Dy 0.24 Tb 0.1 ) 3 O 7-x (FDTO), which shows semiconducting behavior with reasonable electrical conductivity (~500 mOhm-cm), an optical band-gap (2.4 eV), and a large enough magnetic moment (~200 emu/cc), all of which can be tuned by varying the oxygen content during deposition. Magnetoelectric devices were made by integrating ultrathin FDTO with multiferroic BiFeO 3 . A strong enhancement in the magnetic coercive field of FDTO grown on BiFeO 3 validated a large exchange coupling between them. Additionally, FDTO served as an excellent top electrode for ferroelectric switching in BiFeO 3 with no sign of degradation after ~10 10 switching cycles. RT magneto-electric coupling was demonstrated by modulating the resistance states of spin-valve structures using electric fields.

Diabetics are prone to chronic wounds that have slower healing, and methods of accelerating the wound closure and to ensure protection from infections are critically needed. MicroRNA-146a gets dysregulated in diabetic wounds and injection of this microRNA combined with reactive oxygen species-scavenging cerium oxide nanoparticles (CNPs) can reduce inflammation and improve wound healing; however, a better delivery method than intradermal injections is needed. Here we demonstrate a biomaterial system of zwitterionic cryogels (gels formed below freezing temperatures) laden with CNP-miR146a that are topically applicable, injectable, self-healable, and provide sustained release of the therapeutic molecules. These cryogels are comprised of CBMA or SBMA and HEMA, and do not contain chemical crosslinkers. Properties of the gels can be manipulated by changing monomer type and ratio. These materials have demonstrated efficacy and viability in vivo with a diabetic mouse wound healing model. Overall, these materials have a high potential for application in wound treatments due to their ease of production, antifouling characteristics, durability, topical application, and sustained release mechanics. STATEMENT OF SIGNIFICANCE: This work presents the development of zwitterionic cryogels with unique physical properties including injectability and self-healing, that also offer highly sustained release of nanoparticles over time to improve wound healing in a diabetic mouse model. The nanoparticles are made of cerium oxide, which is known to scavenge reactive oxygen species and reduce oxidative stress, and these particles have been further tagged with a microRNA146a that has been shown to reduce inflammation. Zwitterionic materials are known for their superior antifouling properties and good biocompatibility and ability to incorporate bioactive factors. Given these properties, the use of these materials as wound healing dressings would be exciting, yet to date it has been difficult to prolong the release of bioactive factors from them due to their hydrophilicity. Previously we developed zwitterionic cyrogels with very sustained protein release over time, but those materials were quite brittle and difficult to handle. Here, we demonstrate for the first time that by removing the crosslinker molecule from our reaction and polymerizing gels under cryo-conditions, we are able to form zwitterionic cryogels that are injectable, self-healing, and with sustained release profiles. The sustained release of miRNA146a-tagged cerium oxide nanoparticles from these gels is demonstrated to speed up diabetic wound healing time and significantly reduce inflammation., (Copyright © 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Correction for 'Antioxidant properties of ALD grown nanoceria films with tunable valency' by Ankur Gupta et al., Biomater. Sci., 2019, DOI: 10.1039/c9bm00397e.

Herein, we provide the first account of a method to control cerium oxide's mixed valence states (as Ce 3+ to Ce 4+ ratio) in ultra-thin films formed via atomic layer deposition (ALD). It is determined that modulation of Ce 3+ /Ce 4+ ratio occurs with respect to film thickness and is analogous to the change in surface chemistry observed for cerium oxide nanoparticles with varying particle diameter. The influence of film thickness on enzyme-mimetic radical scavenging is also characterized. Higher film thicknesses show 9-fold increase in catalytic activity. In vitro biocompatibility (apoptosis < 4%) and electrochemical biosensing (lowest concentration: 18 ppt) studies were performed to demonstrate the potential of ALD-grown nanoceria films for biomedical applications.

Nanoceria, typically used for "clean-air" catalytic converter technologies because of its ability to capture, store, and release oxygen, is the same material that has the potential to be used in nanomedicine. Specifically, nanoceria can be used to control oxygen content in cellular environments; as a "nanozyme", nanoceria mimics enzymes by acting as an antioxidant agent. The computational design procedures for predicting active materials for catalytic converters can therefore be used to design active ceria nanozymes. Crucially, the ceria nanomedicine is not a molecule; rather, it is a crystal and exploits its unique crystal properties. Here, we use ab initio and classical computer modeling, together with the experiment, to design structures for nanoceria that maximize its nanozymetic activity. We predict that the optimum nanoparticle shape is either a (truncated) polyhedral or a nanocube to expose (active) CeO 2 {100} surfaces. It should also contain oxygen vacancies and surface hydroxyl species. We also show that the surface structures strongly affect the biological activity of nanoceria. Analogous to catalyst poisoning, phosphorus "poisoning", the interaction of nanoceria with phosphate, a common bodily electrolyte, emanates from phosphate ions binding strongly to CeO 2 {100} surfaces, inhibiting oxygen capture and release and hence its ability to act as a nanozyme. Conversely, the phosphate interaction with {111} surfaces is weak, and therefore, these surfaces protect the nanozyme against poisoning. The atom-level understanding presented here also illuminates catalytic processes and poisoning in "clean-air" or fuel-cell technologies because the mechanism underpinning and exploited in each technology, oxygen capture, storage, and release, is identical.

The authors investigated the role of different size and morphology of cerium oxide nanoparticles (CNPs) in cellular uptake and internalization at the nano-bio interface. Atomic force microscopy (AFM) has been utilized to record changes in the membrane elasticity as a function of ceria particle morphology and concentration. Young's Modulus was estimated in presence and absence of CNPs of different sizes by gauging the membrane elasticity of CCL30 (squamous cell carcinoma) cells. Significant change in Young's Modulus was observed for CNP treatments at higher concentrations, while minimum membrane disruption was observed at lower concentrations. Studies using blocking agents specific to energy-dependent cellular internalization pathways indicated passive cellular uptake for smaller CNPs (3-5 nm). Other observations showed that larger CNPs were unable to permeate the cell membrane, which indicates an active uptake mechanism by the cell membrane. The ability of smaller CNPs (3-5 nm) to permeate the cell membrane without energy consumption by uptake pathways suggests potential for use as nanovectors for the delivery of bioactive molecules. Specifically, the passive uptake mechanism allows for the delivery of surface-bound molecules directly to the cytoplasm, avoiding the extreme chemical conditions of endosomal pathways.

Arsenic contamination has posed a health risk to millions of people around the world. In this study, we describe a simple and facile one-step hydrothermal synthesis of a ceria-graphene oxide (ceria-GO) composite for the efficient removal of arsenic species. The prepared ceria-GO composite materials exhibited almost complete (over 99.99%) and quick removal of both arsenic species within 0.1 mg L -1 of the initial concentration. The calculated adsorption capacities were 185 mg g -1 for As(iii) and 212 mg g -1 for As(v). It was found that Ce 3+ is an active site and continuously adsorbs arsenic species; there is a concomitant change from Ce 4+ to Ce 3+ due to the solution redox environment. This increase in the Ce 3+ concentration further facilitates the complete removal of arsenic species in solution. Thus our approach offers a promising potential for the treatment of arsenic-contaminated drinking water.

Cerium oxide nanoparticles (nanoceria; CNPs) have been found to have both pro-oxidant and anti-oxidant effects on different cell systems or organisms. In order to untangle the mechanisms which underlie the biological activity of nanoceria, we have studied the effect of five different CNPs on a model relevant aquatic microorganism. Neither shape, concentration, synthesis method, surface charge (ζ-potential), nor nominal size had any influence in the observed biological activity. The main driver of toxicity was found to be the percentage of surface content of Ce(3+) sites: CNP1 (58%) and CNP5 (40%) were found to be toxic whereas CNP2 (28%), CNP3 (36%) and CNP4 (26%) were found to be non-toxic. The colloidal stability and redox chemistry of the most and least toxic CNPs, CNP1 and CNP2, respectively, were modified by incubation with iron and phosphate buffers. Blocking surface Ce(3+) sites of the most toxic CNP, CNP1, with phosphate treatment reverted toxicity and stimulated growth. Colloidal destabilization with Fe treatment only increased toxicity of CNP1. The results of this study are relevant in the understanding of the main drivers of biological activity of nanoceria and to define global descriptors of engineered nanoparticles (ENPs) bioactivity which may be useful in safer-by-design strategies of nanomaterials.

Single-crystalline ceria nanorods were fabricated using a hydrothermal process and annealed at 325 °C-800 °C. As-synthesized CeO2 nanorods contain a high concentration of defects, such as oxygen vacancies and high lattice strains. Annealing resulted in an improved lattice crystalline quality along with the evolution of novel cavity-shaped defects in the nanorods with polyhedral morphologies and bound by e.g. {111} and {100} (internal) surfaces, confirmed for both air (ex situ) and vacuum (in situ) heating. We postulate that the cavities evolve via agglomeration of vacancies within the as-synthesized nanorods.