Search

The study of nuclear fission yields has a major impact on the characterization and understanding of the fission process and is mandatory for reactor applications. In the framework of a collaboration between the CEA, the LPSC and the ILL, a program of actinide fission yield measurements has been ongoing for several years at the LOHENGRIN spectrometer. However, the measurement of very low fission yields in the symmetry region and the heavy wing of the distributions is difficult to achieve due to the strong contamination by other masses with much higher yields and requires the development of a new experimental setup. This paper will first present the results of a new absolute measurement of the 235U(nth,f) mass yields using an ionization chamber placed at the exit of the spectrometer. Although very well documented in the literature, these yields show uncertainties lying from 3% to 10% with large discrepancies between libraries and a lack of correlation matrices. New experimental data obtained at the LOHENGRIN spectrometer will be detailed, along with the measurement method and the production of the experimental covariance matrix. The second part will show the development of a Time of Flight (ToF) line in order to improve the background rejection in the mass yield measurements. In the symmetry region, the precision of the measurement is limited by the background estimation due to the charge exchanges with the residual gas of the separator. We plan to analyze the events using a triple coincidence (∆E x E) x ToF, whereas today only (∆E x E) selection is available. The new ToF line is built using Si3N4 foils and secondary electron detectors (SED) for the start and stop detectors. We will present the choices made for the SED technology along with the progress achieved on the ToF line characterization.

Nuclear fission yields are key data for reactor studies, such as spent fuel inventory or decay heat, and for understanding fission process. Despite a significant effort allocated to measure fission yields during the last decades, the recent evaluated libraries still need improvements in particular in the reduction of the uncertainties. Moreover, some discrepancies between these libraries must be explained. Additional measurements provide complementary information and estimations of experimental correlations, and new kinds of measurements enable to test the models used during the nuclear data evaluation process. A common effort by the CEA, the LPSC and the ILL aims at tackling these issues by providing precise measurements of isotopic and isobaric fission yields with the related variance-covariance matrices. Additionally, the experimental program involves a large range of observables requested by the evaluations, such as kinetic energy dependency of isotopic yields and odd-even effect in order to test the sharing of total excitation energy and the spin generation mechanism. Another example is the complete range of isotopic distribution per mass that allows the determination of the charge polarization, which has to be consistent for complementary masses (pre-neutron emission). For instance, this information is the key observable for the evaluation of isotopic yields. Finally, ionic charge distributions are indirect measurements of nanosecond isomeric ratios as a probe of the nuclear de-excitation path in the (E*, J, π) representation. Measurements for thermal neutron induced fission of 241 Pu have been carried out at the ILL in Grenoble, using the LOHENGRIN mass spectrometer. Methods, results and comparison to models calculations will be presented corresponding to a status on fission fragments observables reachable with this facility.

The CEA in collaboration with ILL and LPSC has developed a measurement program on symmetric and heavy mass fission product distributions. The combination of measurements with ionisation chamber and Ge detectors is necessary to describe precisely the heavy fission product region in mass and charge. Recently, new measurements of fission yields and kinetic energy distributions, for different fissioning systems (233,235 U(nth, f),241 Am(2nth, f) and 239,241 Pu(nth, f), were performed with recoil spectrometer LOHENGRIN. The focus has been done on the self-normalization of the data to provide new absolute measurements, independently of any libraries along with the experimental covariance matrix. To reach precise measurements, a new experimental procedure was developed along with a new analysis method.

Nuclear fission yields are key parameters to evaluate reactor physics observables, such as fuel inventory, decay heat, spent fuel radiotoxicity, criticality but also for understanding the fission process. Despite a significant effort allocated to measure fission yields during the last decades, the recent evaluated libraries still need improvements in particular in the description of the uncertainties with the associated correlations. Additional kinds of measurements provide complementary information in order to test the models used in the nuclear data evaluation. Moreover, some discrepancies between these libraries must be explained. A common effort by the CEA, the LPSC and the ILL aims at tackling these issues by providing precise measurement of isotopic and isobaric fission yields with the related variance-covariance matrices. Nevertheless, the experimental program represents itself a large range of observables requested by the evaluations: isotopic yields, nuclear charge polarization, odd-even effect, isomeric ratio and their dependency with fission fragment kinetic energy as a probe of the nuclear de-excitation path in the (E*, Jπ) representation. Measurements for thermal neutron induced fission of 241Pu have been carried out at the Institut Laue Langevin using the LOHENGRIN mass spectrometer. Experimental program, observables reachable, results and comparison to model calculations are shown.

Nuclear fission yields data measurements for thermal neutron induced fission of 241Pu have been carried out at the ILL in Grenoble, using the Lohengrin mass spectrometer. The relative isotopic yields for the masses 137 up to 141 have been derived with the associated experimental covariance matrices. Moreover, from preliminary results for the masses 92, 138 and 139, a clear evolution over fission product kinetic energy of the isotopic total count rate is observed.

The study of fission yields has a major impact on the characterization and understanding of the fission process and is mandatory for reactor applications. The LPSC in collaboration with ILL and CEA has developed a measurement program on fission fragment distributions at the Lohengrin spectrometer of the ILL, with a special focus on the masses constituting the heavy peak. We will present in this paper our measurement of the very low fission yields in the symmetry mass region and the heavy mass wing of the distribution for 233U thermal neutron induced fission. The difficulty due to the strong contamination by other masses with much higher yields will be addressed in the form of a new analysis method featuring the required contaminant correction. The apparition of structures in the kinetic energy distributions and possible interpretations will be discussed, such as a possible evidence of fission modes.

The modelling of γ heating and neutron damage inside a nuclear reactor is essential to design the next generation of nuclear reactors. The determination of the fission fragment momentum is a key element to perform accurate calculations of the γ heating. One way to assess this information is to look at the isomeric ratio of different nuclei. According to the lifetime of the isomeric state, different experimental techniques were developed at the LOHENGRIN spectrometer. A focus on the measurement of isomeric ratios of 136I in neutron induced fission of 241Pu is presented. A discussion with the current assumptions used in the evaluation process for isomeric ratio is also shown.

Within the EXILL campaign a large and efficient cluster of Ge-detectors was installed around a very well collimated neutron beam. This has allowed to carry out rather complete spectroscopic studies close to the line of stability using the (n,γ) reaction. Neutron rich isotopes were produced by neutron induced fission and prompt spectroscopy was carried out. The isotope selection in this setup was based on a partially known level scheme and the use of triple coincidences. The latter is limiting the statistical sensitivity in the case of weak production yields. Based on the experiences of these campaigns we are currently developing a new setup: FIPPS (FIssion Product Prompt Spectroscopy). This setup combines a collimated neutron beam, a highly efficient cluster of Ge detectors, a gas filled magnet and auxiliary detectors. The presence of the gas filled magnet will allow us to identify fission products directly and should give access to a new quality of studies if compared to the EXILL campaign. The EXILL campaign and the FIPPS project are presented.

The spectroscopy of the prompt gamma decay from fission products gives information on the entry states, e.g. distribution functions for excitation energy and spin, and therefore a direct link to the fission process itself. This type of spectroscopy is, however, only possible when a filter can be constructed which allows setting a gate to the gamma-spectrum in a narrow region in mass and nuclear charge, as well as on the total excitation energy of the fragment split under investigation. A possible configuration of a prompt gamma-ray spectrometer consist of a gamma-ray array composed of high resolution germanium detectors, coupled to a gas filled magnet. We will outline the principles for a gas filled magnetic spectrometer for fission product spectroscopy. In particular the focusing characteristics of such a device, which are valid for particles in the velocity regime of E/A< 1MeV/amu, will be addressed. First experiments on the LOHENGRIN spectrometer in Grenoble investigating on the behavior of fission products in gas filled magnets have been performed, and have validated the experimental approach to the nuclear fission process with such a device.

Excited states in the nuclei 83As and 84,86Se have been studied via prompt γ-ray spectroscopy. The nuclei were produced by the proton-induced fission of a 238U target, at the accelerator of the University of Jyväskylä. The JUROGAM-II array was used to detect prompt γ-rays and a triple-γ coincidence analysis performed. A comparison of the N = 50 nuclei with shell-model calculations reproduces the low-lying states in 83As and 84Se well. The inclusion of particle-hole excitations is necessary to correctly describe the states above ∼ 3.5 MeV.

Prompt γ-ray spectroscopy of neutron-rich cadmium isotopes has been performed. The nuclei of interest have been populated via a 25-MeV, proton-induced fission of the 238U thick target and prompt γ-rays measured using the multi-detector HPGe array JUROGAM II. New high-spin decays have been observed and placed in the level scheme using triple coincidence gates. The experimental results are compared to shell-model calculations and show good agreement.

A set of neutron transmission and capture experiments based on the Time Of Flight (TOF) technique, were performed in order to determine the 241Am capture cross section in the energy range from 0.01 eV to 1 keV. The GELINA facility of the Institute for Reference Materials and Measurements (IRMM) served as the neutron source. A pair of C6D6 liquid scintillators was used to register the prompt gamma rays emerging from the americium sample, while a Li-glass detector was used in the transmission setup. Results from the capture and transmission data acquired are consistent with each other, but appear to be inconsistent with the evaluated data files. Resonance parameters have been derived for the data up to the energy of 100 eV.

We review the statistical model and its application for the process of nuclear fission. The expressions for excitation energy and spin distributions for the individual fission fragments are given. We will finally emphasize the importance of measuring prompt gamma decay to further test the statistical model in nuclear fission with the FIPPS project.

The accurate knowledge of the fission of actinides is necessary for studies of innovative nuclear reactor concepts. The fission yields have a direct influence on the evaluation of the fuel inventory or the reactor residual power after shutdown. A collaboration between the ILL, LPSC and CEA has developed a measurement program on fission fragment distributions at ILL in order to measure the isotopic and isomeric yields. The method is illustrated using the 233U(n,f)98Y reaction. However, the extracted beam from the Lohengrin spectrometer is not isobaric ions which limits the low yield measurements. Presently, the coupling of the Lohengrin spectrometer with a Gas Filled Magnet (GFM) is studied at the ILL in order to define and validate the enhanced purification of the extracted beam. This work will present the results of the spectrometer characterisation, along with a comparison with a dedicated Monte Carlo simulation especially developed for this purpose.