Search

Understanding the high-frequency transport characteristics of magnetic tunnel junctions (MTJs) is crucial for the development of fast-operating spintronics memories and radio frequency devices. Here, we present the study of frequency-dependent capacitive current effect in CoFeB/MgO-based MTJs and its influence on magnetization dynamics using time-resolved magneto-optical Kerr effect technique. In our device operating at gigahertz frequencies, we find a large displacement current of the order of mA's, which does not break the tunnel barrier of the MTJ. Importantly, this current generates an Oersted field and spin-orbit torque, inducing magnetization dynamics. Our discovery holds promise for building robust MTJ devices operating under high current conditions, also highlighting the significance of capacitive impedance in high frequency magnetotransport techniques.

A charge density wave (CDW) represents an exotic state in which electrons are arranged in a long range ordered pattern in low-dimensional materials. Although our understanding of the fundamental character of CDW has been enriched after extensive studies, its relationship with functional phenomena remains relatively limited. Here, we show an unprecedented demonstration of a tunable charge-spin interconversion (CSI) in graphene/1T-TaS$_2$ van der Waals heterostructures by manipulating the distinct CDW phases in 1T-TaS$_2$. Whereas CSI from spins polarized in all three directions are observed in the heterostructure when the CDW phase does not show commensurability, the output of one of the components disappears and the other two are enhanced when the CDW phase becomes commensurate. The experimental observation is supported by first-principles calculations, which evidence that chiral CDW multidomains are at the origin of the switching of CSI. Our results uncover a new approach for on-demand CSI in low-dimensional systems, paving the way for advanced spin-orbitronic devices., Comment: Funding information: Marie Sklodowska-Curie Actions, H2020-MSCA-ITN-2020; Project Acronym SPEAR; Grant Agreement No. 955671

Multi-directional spin-to-charge conversion - in which spin polarizations with different orientations can be converted into a charge current in the same direction - has been demonstrated in low-symmetry materials and interfaces. This is possible because, in these systems, spin to charge conversion can occur in unconventional configurations in which spin polarization and charge current where charge current, spin current and polarization do not need to be mutually orthogonal. Here, we explore, in the low temperature regime, the spin-to-charge conversion in heterostructures of graphene with the low-symmetry 1T' phase of MoTe$_2$. First, we observe the emergence of charge conversion for out-of-plane spins at temperatures below 100 K. This unconventional component is allowed by the symmetries of both MoTe$_2$ and graphene and likely arises from spin Hall effect in the spin-orbit proximitized graphene. Moreover, we examine the low-temperature evolution of non-local voltage signals arising from the charge conversion of the two in-plane spin polarizations, which have been previously observed at higher temperature. As a result, we report omni-directional spin-to-charge conversion - for all spin polarization orientations - in graphene/MoTe${_2}$ heterostructures at low temperatures., Comment: 7 pages, 4 figures

Graphene is a light material for long-distance spin transport due to its low spin-orbit coupling, which at the same time is the main drawback to exhibit a sizeable spin Hall effect. Decoration by light atoms has been predicted to enhance the spin Hall angle in graphene while retaining a long spin diffusion length. Here, we combine a light metal oxide (oxidized Cu) with graphene to induce the spin Hall effect. Its efficiency, given by the product of the spin Hall angle and the spin diffusion length, can be tuned with the Fermi level position, exhibiting a maximum (1.8 $\pm$ 0.6 nm at 100 K) around the charge neutrality point. This all-light-element heterostructure shows a larger efficiency than conventional spin Hall materials. The gate-tunable spin Hall effect is observed up to room temperature. Our experimental demonstration provides an efficient spin-to-charge conversion system free from heavy metals and compatible with large-scale fabrication., Comment: 15 pages, 4 figures, and Supporting Information. Minor typos corrected in this version. Funding information: Marie Sklodowska-Curie Actions, H2020-MSCA-ITN-2020; Project Acronym SPEAR; Grant Agreement No. 955671

Spin-charge interconversion (SCI) is a central phenomenon to the development of spintronic devices from materials with strong spin-orbit coupling (SOC). In the case of materials with high crystal symmetry, the only allowed SCI processes are those where the spin current, charge current and spin polarization directions are orthogonal to each other. Consequently, standard SCI experiments are designed to maximize the signals arising from the SCI processes with conventional mutually orthogonal geometry. However, in low-symmetry materials, certain non-orthogonal SCI processes are also allowed. Since the standard SCI experiment is limited to charge current flowing only in one direction in the SOC material, certain allowed SCI configurations remain unexplored. In this work, we performed a thorough SCI study in a graphene-based lateral spin valve combined with low-symmetry MoTe$_2$. Due to a very low contact resistance between the two materials, we could detect SCI signals using both a standard configuration, where the charge current is applied along the MoTe$_2$, and a recently introduced (3D-current) configuration, where the charge current flow can be controlled in three directions within the heterostructure. As a result, we observed three different SCI components, one orthogonal and two non-orthogonal, giving new insight into the SCI processes in low-symmetry materials. The large SCI signals obtained at room temperature, along with the versatility of the 3D-current configuration, provide feasibility and flexibility to the design of the next generation of spin-based devices., Comment: 11 pages, 4 figures

The conversion of spin currents polarized in different directions into charge currents is a keystone for novel spintronic devices. Van der Waals heterostructures with tailored symmetry are a very appealing platform for such a goal. Here, by performing nonlocal spin precession experiments, we demonstrate the spin-to-charge conversion (SCC) of spins oriented in all three directions (x, y, and z). By analyzing the magnitude and temperature dependence of the signal in different configurations, we argue that the different SCC components measured are likely due to spin-orbit proximity and broken symmetry at the twisted graphene/NbSe$_2$ interface. Such efficient omnidirectional SCC opens the door to the use of new architectures in spintronic devices, from spin-orbit torques that can switch any magnetization to the magnetic state readout of magnetic elements pointing in any direction.

Friction plays an essential role in most physical processes that we experience in our everyday life. Examples range from our ability to walk or swim, to setting boundaries of speed and fuel efficiency of moving vehicles. In magnetic systems, the displacement of chiral domain walls (DW) and skyrmions (SK) by Spin Orbit Torques (SOT), is also prone to friction. Chiral damping, the dissipative counterpart of the Dzyaloshinskii Moriya Interaction (DMI), plays a central role in these dynamics. Despite experimental observation, and numerous theoretical studies confirming its existence, the influence of chiral damping on DW and SK dynamics has remained elusive due to the difficulty of discriminating from DMI. Here we unveil the effect that chiral damping has on the flow motion of DWs and SKs driven by current and magnetic field. We use a static in-plane field to lift the chiral degeneracy. As the in-plane field is increased, the chiral asymmetry changes sign. When considered separately, neither DMI nor chiral damping can explain the sign reversal of the asymmetry, which we prove to be the result of their competing effects. Finally, numerical modelling unveils the non-linear nature of chiral dissipation and its critical role for the stabilization of moving SKs.

Understanding spin physics in graphene is crucial for developing future two-dimensional spintronic devices. Recent studies show that efficient spin-to-charge conversions via either the inverse spin Hall effect or the inverse Rashba-Edelstein effect can be achieved in graphene by proximity with an adjacent spin-orbit coupling material. Lateral spin valve devices, made up of a graphene Hall bar and ferromagnets, are best suited for such studies. Here, we report that signals mimicking the inverse Rashba-Edelstein effect can be measured in pristine graphene possessing negligible spin-orbit coupling, confirming that these signals are unrelated to spin-to-charge conversion. We identify either the anomalous Hall effect in the ferromagnet or the ordinary Hall effect in graphene induced by stray fields as the possible sources of this artefact. By quantitatively comparing these options with finite-element-method simulations, we conclude the latter better explains our results. Our study deepens the understanding of spin-to-charge conversion measurement schemes in graphene, which should be taken into account when designing future experiments., Comment: 14 pages, 5 figures, Supplementary Information

The proximity effect opens ways to transfer properties from one material into another and is especially important in two-dimensional materials. In van der Waals heterostructures, transition metal dichalcogenides (TMD) can be used to enhance the spin-orbit coupling of graphene leading to the prediction of gate controllable spin-to-charge conversion (SCC). Here, we report for the first time and quantify the SHE in graphene proximitized with WSe$_2$ up to room temperature. Unlike in other graphene/TMD devices, the sole SCC mechanism is the spin Hall effect and no Rashba-Edelstein effect is observed. Importantly, we are able to control the SCC by applying a gate voltage. The SCC shows a high efficiency, measured with an unprecedented SCC length larger than 20 nm. These results show the capability of two-dimensional materials to advance towards the implementation of novel spin-based devices and future applications., Comment: 12 pages, 4 figures, 1 table, Supplementary Material

Spin-orbit coupling in graphene can be enhanced by chemical functionalization, adatom decoration or proximity with a van der Waals material. As it is expected that such enhancement gives rise to a sizeable spin Hall effect, a spin-to-charge current conversion phenomenon of technological relevance, it has sparked wide research interest. However, it has only been measured in graphene/transition metal dichalcogenide van der Waals heterostructures with limited scalability. Here, we experimentally demonstrate spin Hall effect up to room temperature in bilayer graphene combined with a nonmagnetic insulator, an evaporated bismuth oxide layer. The measured spin Hall effect raises most likely from an extrinsic mechanism. With a large spin-to-charge conversion efficiency, scalability, and ease of integration to electronic devices, we show a promising material heterostructure suitable for spin-based device applications., Comment: 12 pages, 4 figures, supporting information

Efficient and versatile spin-to-charge current conversion is crucial for the development of spintronic applications, which strongly rely on the ability to electrically generate and detect spin currents. In this context, the spin Hall effect has been widely studied in heavy metals with strong spin-orbit coupling. While the high crystal symmetry in these materials limits the conversion to the orthogonal configuration, unusual configurations are expected in low symmetry transition metal dichalcogenide semimetals, which could add flexibility to the electrical injection and detection of pure spin currents. Here, we report the observation of spin-to-charge conversion in MoTe$_2$ flakes, which are stacked in graphene lateral spin valves. We detect two distinct contributions arising from the conversion of two different spin orientations. In addition to the conventional conversion where the spin polarization is orthogonal to the charge current, we also detect a conversion where the spin polarization and the charge current are parallel. Both contributions, which could arise either from bulk spin Hall effect or surface Edelstein effect, show large efficiencies comparable to the best spin Hall metals and topological insulators. Our finding enables the simultaneous conversion of spin currents with any in-plane spin polarization in one single experimental configuration., Comment: 14 pages, 4 figures, and Supporting Information

Graphene is an excellent material for long distance spin transport but allows little spin manipulation. Transition metal dichalcogenides imprint their strong spin-orbit coupling into graphene via proximity effect, and it has been predicted that efficient spin-to-charge conversion due to spin Hall and Rashba-Edelstein effects could be achieved. Here, by combining Hall probes with ferromagnetic electrodes, we unambiguously demonstrate experimentally spin Hall effect in graphene induced by MoS$_2$ proximity and for varying temperature up to room temperature. The fact that spin transport and spin Hall effect occur in different parts of the same material gives rise to a hitherto unreported efficiency for the spin-to-charge voltage output. Remarkably for a single graphene/MoS$_2$ heterostructure-based device, we evidence a superimposed spin-to-charge current conversion that can be indistinguishably associated with either the proximity-induced Rashba-Edelstein effect in graphene or the spin Hall effect in MoS$_2$. By comparing our results to theoretical calculations, the latter scenario is found the most plausible one. Our findings pave the way towards the combination of spin information transport and spin-to-charge conversion in two-dimensional materials, opening exciting opportunities in a variety of future spintronic applications., Comment: 15 pages, 4 figures and Supporting Information

Structural symmetry breaking in magnetic materials is responsible for a variety of outstanding physical phenomena. Examples range from the existence of multiferroics, to current induced spin orbit torques (SOT) and the formation of topological magnetic structures. In this letter we bring into light a novel effect of the structural inversion asymmetry (SIA): a chiral damping mechanism. This phenomenon is evidenced by measuring the field driven domain wall (DW) motion in perpendicularly magnetized asymmetric Pt/Co/Pt trilayers. The difficulty in evidencing the chiral damping is that the ensuing DW dynamics exhibit identical spatial symmetry to those expected from the Dzyaloshinskii-Moriya interaction (DMI). Despite this fundamental resemblance, the two scenarios are differentiated by their time reversal properties: while DMI is a conservative effect that can be modeled by an effective field, the chiral damping is purely dissipative and has no influence on the equilibrium magnetic texture. When the DW motion is modulated by an in-plane magnetic field, it reveals the structure of the internal fields experienced by the DWs, allowing to distinguish the physical mechanism. The observation of the chiral damping, not only enriches the spectrum of physical phenomena engendered by the SIA, but since it can coexists with DMI it is essential for conceiving DW and skyrmion devices.

The nucleation of reversed magnetic domains in Pt/Co/AlO$_{x}$ microstructures with perpendicular anisotropy was studied experimentally in the presence of an in-plane magnetic field. For large enough in-plane field, nucleation was observed preferentially at an edge of the sample normal to this field. The position at which nucleation takes place was observed to depend in a chiral way on the initial magnetization and applied field directions. An explanation of these results is proposed, based on the existence of a sizable Dzyaloshinskii-Moriya interaction in this sample. Another consequence of this interaction is that the energy of domain walls can become negative for in-plane fields smaller than the effective anisotropy field., Comment: Published version, Physical Review Letters 113, 047203 (2014)