Search

The biofilm formation on equipment surfaces in dairy manufacturing is a major concern for industry and consumers alike, which may affect the safety and quality of dairy products. In order to identify the bio-contamination risk of materials commonly used in dairy manufacturing, adhesion of Staphylococcus aureus on glass coated by two kinds of UHT milk (whole milk and skimmed milk) was investigated. It is known that adhesion is mainly governed by surface physicochemical properties, for that, the effect of milk components on physicochemical properties of glass and bacterial surfaces were exanimated through contact angle measurements. MATLAB software was used to evaluate the ability of S. aureus adhesion on glass. The hydrophobic quantitative and electron acceptor characteristics of the glass appear to increase with the presence of fat in milk, while its electron donor property decreases with this component. The percentage of occupied surface of untreated glass was more important than in treated surfaces for 50% of the strains studied. As well, the percentage of occupied surface by bacterial strains in untreated glass by skimmed milk is generally more important compared to the whole milk. Therefore, the risk of bio-contamination of untreated glass is more favorable for bacteria cultured in skimmed milk compared to these in whole milk but the bio-contamination risk on covered glass by milk is not milk dependent and is strain dependent.

To improve the start-up speed and efficiency of bioreactors, biofilm technology is sometimes used. This technology uses various types of materials to facilitate the adhesion of microorganisms. In this study, the surface characteristics of inert substrates and substrates after olive oil-mill wastewater (OMWW) conditioning film were evaluated to understand the impact of OMWW on adhesion as well as the most suitable material to optimize bacterial adhesion. Three common substrates made of different polymers were tested for bacterial adhesion before and after treatment with OMWW: PP (polypropylene), PET (Polyethylene terephthalate), and PVC (polyvinyl chloride). The surfaces’ physicochemical characteristics were studied by measuring the contact angle for the studied bacteria strain and the supports, before and after treatment with OMWW. Results of initial adhesion tests for untreated and treated supports showed differences in how bacterial cells adhered to substrates. Before treatment with OMWW, PVC and then PP showed a significant adhesion capacity, double that of PET [PVC: 1.58 × 105 CFU/cm2, PP: 1.48 × 105 CFU/cm2 and PET: 0.72 × 105 CFU/cm2]. After treatment with OMWW, initial bacterial adhesion increased by 106 (from 105 CFU/cm2 for untreated supports to 1011 CFU/cm2 for treated supports), and PET followed by PP demonstrated the highest adhesion capacity, 2 and 1.7 times more than PVC, respectively [PET: 1.39 × 1011 CFU/cm2, PP: 1.15 × 1011 CFU/cm2 and PVC: 0.67 × 1011 CFU/cm2]. OMWW conditioning film affects the physicochemical characteristics of plastic supports, especially the donor electron character, and improves the initial adhesion of bacteria to substrates (105 to 1011 CFU/cm2). Therefore, surfaces’ physicochemical characteristics were important in the initial adhesion of the bacteria onto the support before and after treatment.

Microbial adhesion to surfaces is thought to involve physicochemical interactions between the substrate and microbial cells. Understanding the physicochemical aspects involved in the adhesion phenomenon, as a critical step in biofilm formation, is essential to finding ways to prevent their formation and control biocontamination risks. The aim of this study was to investigate the relation between the adhesion behavior of 12 Escherichia coli strains isolated from food and their surface hydrophobicities using qualitative ( θ w ) and quantitative (ΔGiwi) approaches. The surface physicochemical properties of both bacterial cells and glass material were estimated through contact angle measurements. The adhesive behavior of E. coli strains on a glass surface was assessed. The results showed a good logarithmic relation between the percentage of the adhered cells and their surface hydrophobicity with the quantitative approach ΔGiwi; however, qualitative hydrophobicity ( θ w ) appeared to demonstrate no effect regarding adhesion behavior. This work lays the foundation for future studies and opens an important debate on the mechanisms underlying the adhesion behavior of E. coli strains by using the thermodynamic approach (ΔGiwi) as an important model of hydrophobicity that could explain and predict better bacterial adhesion ability.

The main aim of this work was to determine the most appropriate materials for the installation of a water system according to the characteristics of the water that passes through it. To this end, we conducted an investigation of the effect of two types of water (SDW: sterile distilled water and STW: sterile tap water) on the properties of bacterial surfaces and the theoretical adhesion of two bacteria (Pseudomonas aeruginosa and Escherichia coli) on six plumbing materials. Contact angle measurements were used to determine the surface energies of bacteria and materials. XDLVO theory was used to estimate the interactions between bacteria and plumbing materials. The results showed that water had a clear impact on the electron donor character and the hydrophobicity of the bacterial surfaces. Also, the predictive adhesion showed that all tested materials could be colonized by P. aeruginosa and E. coli ([Formula: see text]

We aimed to investigate the adhesion of Legionella pneumophila serogroup1 and L. pneumophila serogroup2-15 on glass, galvanized steel, stainless steel, copper, Polyvinyl chloride(PVC), Cross-linked polyethylene(PEX-c) and Polypropylene Random Copolymer(PPR). The surface physicochemical properties of both bacterial cells and materials were estimated through contact angle measurements. The roughness and surface topography of the materials were evaluated by Atomic Force Microscopy. The two L. pneumophila serogroups and plumbing materials showed a hydrophobic character, while glass surface was hydrophilic. All strains were adhered to all materials with the exception of copper. The result showed that the adhesion of both L. pneumophila sg1 and sg2-15 was systematically expressed with high intensity on galvanized steel followed by PVC, PEX-c, PPR, stainless steel and the low intensity on glass. The extent of adhesion is in correlation with the surface roughness and acid-bases interactions, while hydrophobicity seems to have no effect in adhesion intensity.