Search

Despite the threat of Fusarium dieback posed due to ambrosia fungi cultured by ambrosia beetles such as Euwallacea spp., the wood-degradation mechanisms utilized by ambrosia fungi are not fully understood. In this study, we analyzed the 16S rRNA and 18S rRNA genes of the microbial community from the Ficus tree tunnel excavated by Euwallacea interjectus and isolated the cellulose-degrading fungus, Fusarium spp. strain EI, by enrichment culture with carboxymethyl cellulose as the sole carbon source. The cellulolytic enzyme secreted by the fungus was identified and expressed in Pichia pastoris, and its enzymatic properties were characterized. The cellulolytic enzyme, termed FsXEG12A, could hydrolyze carboxymethyl cellulose, microcrystalline cellulose, xyloglucan, lichenan, and glucomannan, indicating that the broad substrate specificity of FsXEG12A could be beneficial for degrading complex wood components such as cellulose, xyloglucan, and galactoglucomannan in angiosperms. Inhibition of FsXEG12A function is, thus, an effective target for Fusarium dieback caused by Euwallacea spp.

Additional file 1: Table S1. Identification of the cellulolytic enzyme produced by Fusarium spp. strain EI. Table S2. Substrate specificity of the purified GH12 enzyme. Figure S1. Nucleotide sequence alignment of 18S rRNA. Figure S2. Nucleotide sequence alignment of EF-1α. Figure S3. Amino acid sequence alignment of GH12 enzymes.

A GH 134 β-1,4-mannanase SsGH134 from Streptomyces sp. NRRL B-24484 possesses a carbohydrate binding module (CBM) 10 and a glycoside hydrolase 134 domain at the N- and C-terminal regions, respectively. Recombinant SsGH134 expressed in Escherichia coli. SsGH134 was maximally active within a pH range of 4.0–6.5 and retained >80% of this maximum after 90 min at 30°C within a pH range of 3.0–10.0. The β-1,4-mannanase activity of SsGH134 towards glucomannan was 30% of the maximal activity after an incubation at 100°C for 120 min, indicating that SsGH134 is pH-tolerant and thermostable β-1,4-mannanase. SsGH134, SsGH134-ΔCBM10 (CBM10-linker-truncated SsGH134) and SsGH134-G34W (substitution of Gly34 to Trp) bound to microcrystalline cellulose, β-mannan and chitin, regardless of the presence or absence of CBM10. These indicate that GH 134 domain strongly bind to the polysaccharides. Although deleting CBM10 increased the catalytic efficiency of the β-1,4-mannanase, its disruption decreased the pH, solvent and detergent stability of SsGH134. These findings indicate that CBM10 inhibits the β-1,4-mannanase activity of SsGH134, but it is involved in stabilizing its enzymatic activity within a neutral-to-alkaline pH range, and in the presence of various organic solvents and detergents. We believe that SsGH134 could be useful to a diverse range of industries.

A β-1,4-mannanase, termed AoMan134A, that belongs to the GH 134 family was identified in the filamentous fungus Aspergillus oryzae. Recombinant AoMan134A was expressed in Pichia pastoris, and the purified enzyme produced mannobiose, mannotriose, mannotetraose, and mannopentaose from galactose-free β-mannan, with mannotriose being the predominant reaction product. The catalytic efficiency (k cat/K m ) of AoMan134A was 6.8-fold higher toward galactomannan from locust bean gum, than toward galactomannan from guar gum, but similar toward galactomannan from locust bean gum and glucomannan from konjac flour. After incubation at 70°C for 120 min, the activity of AoMan134A toward glucomannan decreased to 50% of the maximal activity at 30°C. AoMan134A retained 50% of its β-1,4-mannanase activity after heating at 90°C for 30 min, indicating that AoMan134A is thermostable. Furthermore, AoMan134A was stable within a neutral-to-alkaline pH range, as well as exhibiting stability in the presence of a range of organic solvents, detergents, and metal ions. These findings suggest that AoMan134A could be useful in a diverse range of industries where conversion of β-mannans is of prime importance.

The activity of a self-sufficient cytochrome P450 enzyme, CYP505D6, from the lignin-degrading basidiomycete Phanerochaete chrysosporium was characterized. Recombinant CYP505D6 was produced in Escherichia coli and purified. In the presence of NADPH, CYP505D6 used a series of saturated fatty alcohols with C9–18 carbon chain lengths as the substrates. Hydroxylation occurred at the ω-1 to ω-6 positions of such substrates with C9–15 carbon chain lengths, except for 1-dodecanol, which was hydroxylated at the ω-1 to ω-7 positions. Fatty acids were also substrates of CYP505D6. Based on the sequence alignment, the corresponding amino acid of Tyr51, which is located at the entrance to the active-site pocket in CYP102A1, was Val51 in CYP505D6. To understand the diverse hydroxylation mechanism, wild-type CYP505D6 and its V51Y variant and wild-type CYP102A1 and its Y51V variant were generated, and the products of their reaction with dodecanoic acid were analyzed. Compared with wild-type CYP505D6, its V51Y variant generated few products hydroxylated at the ω-4 to ω-6 positions. The products generated by wild-type CYP102A1 were hydroxylated at the ω-1 to ω-4 positions, whereas its Y51V variant generated ω-1 to ω-7 hydroxydodecanoic acids. These observations indicated that Val51 plays an important role in determining the regiospecificity of fatty acid hydroxylation, at least that at the ω-4 to ω-6 positions. Aromatic compounds, such as naphthalene and 1-naphthol, were also hydroxylated by CYP505D6. These findings highlight a unique broad substrate spectrum of CYP505D6, rendering it an attractive candidate enzyme for the biotechnological industry. IMPORTANCEPhanerochaete chrysosporium is a white-rot fungus whose metabolism of lignin, aromatic pollutants, and lipids has been most extensively studied. This fungus harbors 154 cytochrome P450-encoding genes in the genome. As evidenced in this study, P. chrysosporium CYP505D6, a fused protein of P450 and its reductase, hydroxylates fatty alcohols (C9–15) and fatty acids (C9–15) at the ω-1 to ω-7 or ω-1 to ω-6 positions, respectively. Naphthalene and 1-naphthol were also hydroxylated, indicating that the substrate specificity of CYP505D6 is broader than those of the known fused proteins CYP102A1 and CYP505A1. The substrate versatility of CYP505D6 makes this enzyme an attractive candidate for biotechnological applications.

The cellulolytic bacterium Ruminococcus flavefaciens of the herbivore rumen produces an elaborate cellulosome system, anchored to the bacterial cell wall via the covalently bound scaffoldin ScaE. Dockerin-bearing scaffoldins also bind to an autonomous cohesin of unknown function, called cohesin G (CohG). Here, we demonstrate that CohG binds to the scaffoldin-borne dockerin in opposite orientation on a distinct site, relative to that of ScaE. Based on these structural data, we propose that the complexed dockerin is still available to bind ScaE on the cell surface. CohG may thus serve as a molecular shuttle for delivery of scaffoldins to the bacterial cell surface.

Protein-protein interactions play a vital role in cellular processes as exemplified by assembly of the intricate multi-enzyme cellulosome complex. Cellulosomes are assembled by selective high-affinity binding of enzyme-borne dockerin modules to repeated cohesin modules of structural proteins termed scaffoldins. Recent sequencing of the fiber-degrading Ruminococcus flavefaciens FD-1 genome revealed a particularly elaborate cellulosome system. In total, 223 dockerin-bearing ORFs potentially involved in cellulosome assembly and a variety of multi-modular scaffoldins were identified, and the dockerins were classified into six major groups. Here, extensive screening employing three complementary medium- to high-throughput platforms was used to characterize the different cohesin-dockerin specificities. The platforms included (i) cellulose-coated microarray assay, (ii) enzyme-linked immunosorbent assay (ELISA) and (iii) in-vivo co-expression and screening in Escherichia coli. The data revealed a collection of unique cohesin-dockerin interactions and support the functional relevance of dockerin classification into groups. In contrast to observations reported previously, a dual-binding mode is involved in cellulosome cell-surface attachment, whereas single-binding interactions operate for cellulosome integration of enzymes. This sui generis cellulosome model enhances our understanding of the mechanisms governing the remarkable ability of R. flavefaciens to degrade carbohydrates in the bovine rumen and provides a basis for constructing efficient nano-machines applied to biological processes.

Ruminococcus flavefaciensis a cellulolytic bacterium found in the rumen of herbivores and produces one of the most elaborate and variable cellulosome systems. The structure of anR. flavefaciensprotein (RfCohG, ZP_06142108), representing a freestanding (non-cellulosomal) type III cohesin module, has been determined. A selenomethionine derivative with a C-terminal histidine tag was crystallized and diffraction data were measured to 2.44 Å resolution. Its structure was determined by single-wavelength anomalous dispersion, revealing eight molecules in the asymmetric unit.RfCohG exhibits the most complex among all known cohesin structures, possessing four α-helical elements and a topographical protuberance on the putative dockerin-binding surface.

Ethylene is an industrially important compound, but more sustainable production methods are desirable. Since cellulosomes increase the ability of cellulolytic enzymes by physically linking the relevant enzymes via dockerin-cohesin interactions, in this study, we genetically engineered a chimeric cellulosome-like complex of two ethylene-generating enzymes from tomato using cohesin-dockerins from the bacteria Clostridium thermocellum and Acetivibrio cellulolyticus. This complex was transformed into Escherichia coli to analyze kinetic parameters and enzyme complex formation and into the cyanobacterium Synechococcus elongatus PCC 7942, which was then grown with and without 0.1 mM isopropyl β-D-1-thiogalactopyranoside (IPTG) induction. Only at minimal protein expression levels (without IPTG), the chimeric complex produced 3.7 times more ethylene in vivo than did uncomplexed enzymes. Thus, cyanobacteria can be used to sustainably generate ethylene, and the synthetic enzyme complex greatly enhanced production efficiency. Artificial synthetic enzyme complexes hold great promise for improving the production efficiency of other industrial compounds.

Clostridial cellulosomes are cellulolytic complexes that are formed by highly specific interactions between one of the repeated cohesin modules present in the scaffolding protein and a dockerin module of the catalytic components. Although Clostridium thermocellum Xyn11A dockerin has a typical C. thermocellum dockerin sequence, in which two amino acid residues are species specifically conserved within the two segments of the dockerin modules, it can recognize Clostridium josui cohesin modules in a non-species-specific manner. The importance of these two conserved amino acids, which are part of the recognition site of the cohesin and dockerin interaction, was investigated by introducing mutations into the first and/or the second segments of the Xyn11A dockerin. Mutations in the first segment did not affect the interactions between dockerin and C. thermocellum and C. josui cohesins. However, mutations in the second segment prevented binding to cohesin proteins. A second round of mutations within the first segment re-established the affinity for both the C. thermocellum and the C. josui cohesins. However, this was not observed for a ‘conventional’ dockerin, Xyn10C. These results suggest that the combination of the first and second dockerin segments is important for the target recognition.

Genome analysis of the Gram-positive cellulolytic bacterium Clostridium thermocellum revealed the presence of multiple negative regulators of alternative σ factors. Nine of the deduced proteins share a strong similarity in their N-terminal sequences to the Bacillus subtilis membrane-associated anti-σI factor RsgI and have an unusual domain organization. In six RsgI-like proteins, the C-terminal sequences contain predicted carbohydrate-binding modules. Three of these modules were overexpressed and shown to bind specifically to cellulose and/or pectin. Bioinformatic analysis of >1200 bacterial genomes revealed that the C. thermocellum RsgI-like proteins are unique to this species and are not present in other cellulolytic clostridial species (e.g. Clostridium cellulolyticum and Clostridium papyrosolvens ). Eight of the nine genes encoding putative C. thermocellum RsgI-like anti-σ factors form predicted bicistronic operons, in which the first gene encodes a putative alternative σ factor, similar to B. subtilis σI, but lacking in one of its domains. These observations suggest a novel carbohydrate-sensing mechanism in C. thermocellum , whereby the presence of polysaccharide biomass components is detected extracellularly and the signal is transmitted intracellularly, resulting in the disruption of the interaction between RsgI-like proteins and σI-like factors, the latter of which serve to activate appropriate genes encoding proteins involved in cellulose utilization.

Family 3 carbohydrate-binding modules (CBM3s) are associated with both cellulosomal scaffoldins and family 9 glycoside hydrolases (GH9s), which are multi-modular enzymes that act on cellulosic substrates. CBM3s bind cellulose. X-ray crystal structures of these modules have established an accepted cellulose-binding mechanism based on stacking interactions between the sugar rings of cellulose and a planar array of aromatic residues located on the CBM3 surface. These planar-strip residues are generally highly conserved, although some CBM3 sequences lack one or more of these residues. In particular, CBM3b′ fromClostridium thermocellumCel9V exhibits such sequence changes and fails to bind cellulosic substrates. A crystallographic investigation of CBM3b′ has been initiated in order to understand the structural reason(s) for this inability. CBM3b′ crystallized in space groupC2221(diffraction was obtained to 2.0 Å resolution in-house) with three independent molecules in the asymmetric unit and in space groupP41212 (diffraction was obtained to 1.79 Å resolution in-house and to 1.30 Å resolution at a synchrotron) with one molecule in the asymmetric unit. The molecular structure of Cel9V CBM3b′ revealed that in addition to the loss of several cellulose-binding residues in the planar strip, changes in the backbone create a surface `hump' which could interfere with the formation of cellulose–protein surface interactions and thus prevent binding to crystalline cellulose.

The cellulosome components are assembled into the cellulosome complex by the interaction between one of the repeated cohesin domains of a scaffolding protein and the dockerin domain of an enzyme component. We prepared five recombinant cohesin polypeptides of the Clostridium thermocellum scaffolding protein CipA, two dockerin polypeptides of C. thermocellum Xyn11A and Xyn10C, four cohesin polypeptides of Clostridium josui CipA, and two dockerin polypeptides of C. josui Aga27A and Cel8A, and qualitatively and quantitatively examined the cohesin-dockerin interactions within C. thermocellum and C. josui, respectively, and the species specificity of the cohesin-dockerin interactions between these two bacteria. Surface plasmon resonance (SPR) analysis indicated that there was a certain selectivity, with a maximal 34-fold difference in the KD values, in the cohesin-dockerin interactions within a combination of C. josui, although this was not detected by qualitative analysis. Affinity blotting analysis suggested that there was at least one exception to the species specificity in the cohesin-dockerin interactions, although species specificity was generally conserved among the cohesin and dockerin polypeptides from C. thermocellum and C. josui, i.e. the dockerin polypeptides of C. thermocellum Xyn11A exceptionally bound to the cohesin polypeptides from C. josui CipA. SPR analysis confirmed this exceptional binding. We discuss the relationship between the species specificity of the cohesin-dockerin binding and the conserved amino acid residues in the dockerin domains.

Experimental identification of carbohydrate-binding modules (CBM) and determination of ligand specificity of each CBM are complementary and compulsory steps for their characterization. Some CBMs are very specific for their primary substrate (e.g., cellulose), whereas others are relatively promiscuous or nonspecific in their substrate preference. Here we describe a simple procedure based on in-tube adsorption of a CBM to various insoluble polysaccharides, followed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS PAGE) for determining the distribution of the CBM between the bound and unbound fractions. This technique enables qualitative assessment of the binding strength and ligand specificity for each CBM.

BackgroundThe bovine rumen maintains a diverse microbial community that serves to break down indigestible plant substrates. However, those bacteria specifically adapted to degrade cellulose, the major structural component of plant biomass, represent a fraction of the rumen microbiome. Previously, we proposed scaC as a candidate for phylotyping Ruminococcus flavefaciens, one of three major cellulolytic bacterial species isolated from the rumen. In the present report we examine the dynamics and diversity of scaC-types both within and between cattle temporally, following a dietary switch from corn-silage to grass-legume hay. These results were placed in the context of the overall bacterial population dynamics measured using the 16S rRNA.Principal findingsAs many as 117 scaC-types were estimated, although just nineteen were detected in each of three rumens tested, and these collectively accounted for the majority of all types present. Variation in scaC populations was observed between cattle, between planktonic and fiber-associated fractions and temporally over the six-week survey, and appeared related to scaC phylogeny. However, by the sixth week no significant separation of scaC populations was seen between animals, suggesting enrichment of a constrained set of scaC-types. Comparing the amino-acid translation of each scaC-type revealed sequence variation within part of the predicted dockerin module but strong conservation in the N-terminus, where the cohesin module is located.ConclusionsThe R. flavefaciens species comprises a multiplicity of scaC-types in-vivo. Enrichment of particular scaC-types temporally, following a dietary switch, and between fractions along with the phylogenetic congruence suggests that functional differences exist between types. Observed differences in dockerin modules suggest at least part of the functional heterogeneity may be conferred by scaC. The polymorphic nature of scaC enables the relative distribution of R. flavefaciens strains to be examined and represents a gene-centric approach to investigating the intraspecific adaptation of an important specialist population.

Genome analysis of the Gram-positive cellulolytic bacterium Clostridium thermocellum revealed the presence of multiple negative regulators of alternative sigma factors. Nine of the deduced proteins share a strong similarity in their N-terminal sequences to the Bacillus subtilis membrane-associated anti-sigma(I) factor RsgI and have an unusual domain organization. In six RsgI-like proteins, the C-terminal sequences contain predicted carbohydrate-binding modules. Three of these modules were overexpressed and shown to bind specifically to cellulose and/or pectin. Bioinformatic analysis of1200 bacterial genomes revealed that the C. thermocellum RsgI-like proteins are unique to this species and are not present in other cellulolytic clostridial species (e.g. Clostridium cellulolyticum and Clostridium papyrosolvens). Eight of the nine genes encoding putative C. thermocellum RsgI-like anti-sigma factors form predicted bicistronic operons, in which the first gene encodes a putative alternative sigma factor, similar to B. subtilissigma(I), but lacking in one of its domains. These observations suggest a novel carbohydrate-sensing mechanism in C. thermocellum, whereby the presence of polysaccharide biomass components is detected extracellularly and the signal is transmitted intracellularly, resulting in the disruption of the interaction between RsgI-like proteins and sigma(I)-like factors, the latter of which serve to activate appropriate genes encoding proteins involved in cellulose utilization.

Background Ruminococcus flavefaciens is a predominant cellulolytic rumen bacterium, which forms a multi-enzyme cellulosome complex that could play an integral role in the ability of this bacterium to degrade plant cell wall polysaccharides. Identifying the major enzyme types involved in plant cell wall degradation is essential for gaining a better understanding of the cellulolytic capabilities of this organism as well as highlighting potential enzymes for application in improvement of livestock nutrition and for conversion of cellulosic biomass to liquid fuels. Methodology/Principal Findings The R. flavefaciens FD-1 genome was sequenced to 29x-coverage, based on pulsed-field gel electrophoresis estimates (4.4 Mb), and assembled into 119 contigs providing 4,576,399 bp of unique sequence. As much as 87.1% of the genome encodes ORFs, tRNA, rRNAs, or repeats. The GC content was calculated at 45%. A total of 4,339 ORFs was detected with an average gene length of 918 bp. The cellulosome model for R. flavefaciens was further refined by sequence analysis, with at least 225 dockerin-containing ORFs, including previously characterized cohesin-containing scaffoldin molecules. These dockerin-containing ORFs encode a variety of catalytic modules including glycoside hydrolases (GHs), polysaccharide lyases, and carbohydrate esterases. Additionally, 56 ORFs encode proteins that contain carbohydrate-binding modules (CBMs). Functional microarray analysis of the genome revealed that 56 of the cellulosome-associated ORFs were up-regulated, 14 were down-regulated, 135 were unaffected, when R. flavefaciens FD-1 was grown on cellulose versus cellobiose. Three multi-modular xylanases (ORF01222, ORF03896, and ORF01315) exhibited the highest levels of up-regulation. Conclusions/Significance The genomic evidence indicates that R. flavefaciens FD-1 has the largest known number of fiber-degrading enzymes likely to be arranged in a cellulosome architecture. Functional analysis of the genome has revealed that the growth substrate drives expression of enzymes predicted to be involved in carbohydrate metabolism as well as expression and assembly of key cellulosomal enzyme components.

Rhodococcus ruber GIN1 (formally Rh. strain GIN1) was previously isolated on the basis of its strong adherence to coal fly ash (CFA) and titanium dioxide particles from CFA sedimentation ponds of an electrical power plant in Israel. The interaction of the bacterium with oxides has been shown to be mediated by a cell surface protein designated TiBP (titanium binding protein) involving primarily strong, non-electrostatic forces. In this work, we set forward to identify this unique exocellular protein. Sequence analysis of the purified protein by mass spectrometry (LC/MS/MS) following trypsinization revealed 11 peptides. All of them showed >90% amino acid residues identity with sequences of one of the orthologs (dldh1) of the cytosolic enzyme dihydrolipoamide dehydrogenase (DLDH), based on the genome sequence of Rhodococcus strain RHA1. This genome was selected as a reference since currently it is the only sequenced Rhodococcal genome. Altogether, these peptides covered over 25% of the 52 kDa protein molecule. N- and C-termini primers were prepared and used to sequence the paralog gene from Rh. ruber GIN1 after polymerase chain reaction (PCR) amplification. All 11 peptides showed 100% identity with the sequence of this gene. The homology of TiBP with the supposedly cytosolic DLDH raised the question of whether the exocellular TiBP possesses DLDH activity. Indeed, intact late logarithmic phase Rh. ruber GIN1 cells, previously shown to express TiBP, were found to possess such activity, while very low activity was associated with stationary phase cells which possess diminished TiBP expression on their surface. Further evidence for the exocellular location of TiBP/DLDH was achieved using specific anti-TiBP polyclonal antibodies by whole cell and protein enzyme-linked immunosorbent assay (ELISA), showing high reactivity of the logarithmic phase cell surface and substantially lower reactivity with the stationary phase cells. As expected, logarithmic phase spheroplasts were not recognized by these antibodies. Similar results were obtained by fluorescence and scanning electron microscopy. Our postulation that DLDH is located on the surface of Rh. ruber GIN1, serving as a TiO2 binding protein, is in accordance with literary evidence on DLDH in other organisms, Bacteria, Archea, and Eukaryots that suggests it is associated with the outer membranes or cell surfaces. As an exocellular protein DLDH assumes various tasks which are not related to its classical role as a 2-oxoacid dehydrogenase, including serving as an adhesion/binding protein in certain bacteria.

The rumen bacterium Ruminococcus albus binds to and degrades crystalline cellulosic substrates via a unique cellulose degradation system. A unique family of carbohydrate-binding modules (CBM37), located at the C terminus of different glycoside hydrolases, appears to be responsible both for anchoring these enzymes to the bacterial cell surface and for substrate binding.

Ruminococcus flavefaciens is a vital cellulosome-producing fibrolytic rumen bacterium. The arrangement of the cellulosomal scaffoldin gene cluster (scaC-scaA-scaB-cttA-scaE) is conserved in two R. flavefaciens strains (17 and FD-1). Sequence analysis revealed a high mosaic conservation of the intergenic regions in the two strains that contrasted sharply with the divergence of the structural sca gene sequences. Based on the conserved intergenic regions, we designed PCR primers in order to examine the sca gene cluster in additional R. flavefaciens strains (C94, B34b, C1a and JM1). Using these conserved and/or degenerate primers, the scaC, scaA and scaB genes were amplified in all six strains, while the entire sca gene cluster and the proximal genes cttA and scaE were successfully amplified in four of the strains (17, FD-1, C94 and JM1). The sequencing of scaA and scaC genes in all the strains yielded additional insight into the variability of the structural genes with regard to the number and type of cohesin modules contained in a conserved molecular skeleton. Moreover, the scaC gene, being short and variable, appears to be a promising functional phylotyping target for metagenomic population studies of R. flavefaciens in the rumen as a function of the individual host animal.

Family 3 carbohydrate-binding modules (CBM3s) are associated with the scaffoldin subunit of the multi-enzyme cellulosome complex and with the family 9 glycoside hydrolases, which are multimodular enzymes that act on plant cell-wall polysaccharides, notably cellulose. Here, the crystallization of CBM3b from cellobiohydrolase 9A is reported. The crystals are tetragonal and belong to space group P4(1) or P4(3). X-ray diffraction data for CBM3b have been collected to 2.68 A resolution on beamline ID14-4 at the ESRF.

A 17-kb scaffoldin gene cluster in Ruminococcus flavefaciens strain FD-1 was compared with the homologous segment published for strain 17. Although the general design of the cluster is identical in the two strains, significant differences in the modular architecture of the scaffoldin proteins were discovered, implying strain-specific divergence in cellulosome organization.

We have sequenced a new gene, cel9B, encoding a family-9 cellulase from a cellulosome-producing bacterium, Acetivibrio cellulolyticus. The gene includes a signal peptide, a family-9 glycoside hydrolases (GH9) catalytic module, two family-3 carbohydrate-binding modules (CBM3c-CBM3b tandem dyad) and a C-terminal dockerin module. An identical modular arrangement exists in two putative GH9 genes from the draft sequence of the Clostridium thermocellum genome. The three homologous CBM3b modules from A. cellulolyticus and C. thermocellum were overexpressed, but, surprisingly, none bound cellulosic substrates. The results raise fundamental questions concerning the possible role(s) of the newly described CBMs. Phylogenetic analysis and preliminary site-directed mutagenesis studies suggest that the catalytic module and the CBM3 dyad are distinctive in their sequences and are proposed to constitute a new GH9 architectural theme.

The interaction between the type-II dockerin domain of the scaffoldin protein CipA and the type-II cohesin domain of the outer layer protein SdbA is the fundamental mechanism for anchoring the cellulosome to the cell surface of Clostridium thermocellum. We constructed and purified a dockerin polypeptide and a cohesin polypeptide, and determined affinity constants of the interaction between them by the surface plasmon resonance method. The dissociation constant (K(D)) value was 1.8 x 10(-9) M, which is a little larger than that for the combination of a type-I dockerin and a type-I cohesin.

The cellulosome components are assembled into the cellulosome complex by the interaction between one of the repeated cohesin domains of a scaffolding protein and the dockerin domain of an enzyme component. We prepared five recombinant cohesin polypeptides of the Clostridium thermocellum scaffolding protein CipA, two dockerin polypeptides of C. thermocellum Xyn11A and Xyn10C, four cohesin polypeptides of Clostridium josui CipA, and two dockerin polypeptides of C. josui Aga27A and Cel8A, and qualitatively and quantitatively examined the cohesin-dockerin interactions within C. thermocellum and C. josui, respectively, and the species specificity of the cohesin-dockerin interactions between these two bacteria. Surface plasmon resonance (SPR) analysis indicated that there was a certain selectivity, with a maximal 34-fold difference in the K(D) values, in the cohesin-dockerin interactions within a combination of C. josui, although this was not detected by qualitative analysis. Affinity blotting analysis suggested that there was at least one exception to the species specificity in the cohesin-dockerin interactions, although species specificity was generally conserved among the cohesin and dockerin polypeptides from C. thermocellum and C. josui, i.e. the dockerin polypeptides of C. thermocellum Xyn11A exceptionally bound to the cohesin polypeptides from C. josui CipA. SPR analysis confirmed this exceptional binding. We discuss the relationship between the species specificity of the cohesin-dockerin binding and the conserved amino acid residues in the dockerin domains.

Background Ruminococcus flavefaciens is one of the predominant fiber-degrading bacteria found in the rumen of herbivores. Bioinformatic analysis of the recently sequenced genome indicated that this bacterium produces one of the most intricate cellulosome systems known to date. A distinct ORF, encoding for a multi-modular protein, RflaF_05439, was discovered during mining of the genome sequence. It is composed of two tandem modules of currently undefined function that share 45% identity and a C-terminal X-dockerin modular dyad. Gaining insight into the diversity, architecture and organization of different types of proteins in the cellulosome system is essential for broadening our understanding of a multi-enzyme complex, considered to be one of the most efficient systems for plant cell wall polysaccharide degradation in nature. Methodology/Principal Findings Following bioinformatic analysis, the second tandem module of RflaF_05439 was cloned and its selenium-labeled derivative was expressed and crystallized. The crystals belong to space group P21 with unit-cell parameters of a = 65.81, b = 60.61, c = 66.13 A, β = 107.66° and contain two protein molecules in the asymmetric unit. The crystal structure was determined at 1.38-A resolution by X-ray diffraction using the single-wavelength anomalous dispersion (SAD) method and was refined to Rfactor and Rfree of 0.127 and 0.152 respectively. The protein molecule mainly comprises a β-sheet flanked by short α-helixes, and a globular α-helical domain. The structure was found to be structurally similar to members of the NlpC/P60 superfamily of cysteine peptidases. Conclusions/Significance The 3D structure of the second repeat of the RflaF_05439 enabled us to propose a role for the currently undefined function of this protein. Its putative function as a cysteine peptidase is inferred from in silico structural homology studies. It is therefore apparent that cellulosomes integrate proteins with other functions in addition to the classic well-defined carbohydrate active enzymes.

Clostridium thermocellum cellulase 9I (Cel9I) is a non-cellulosomal tri-modular enzyme, consisting of a family-9 glycoside hydrolase (GH9) catalytic module and two family-3 carbohydrate-binding modules (CBM3c and CBM3b). The presence of CBM3c was previously shown to be essential for activity, however the mechanism by which it functions is unclear. We expressed the three recombinant modules independently in Escherichia coli and examined their interactions. Non-denaturing gel electrophoresis, isothermal titration calorimetry, and affinity purification of the GH9-CBM3c complex revealed a specific non-covalent binding interaction between the GH9 module and CBM3c. Their physical association was shown to recover 60–70% of the intact Cel9I endoglucanase activity.Structured summary:MINT-6946626:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by comigration in non-denaturing gel electrophoresis (MI:0404)MINT-6946649:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by molecular sieving (MI:0071)MINT-6946687:Cel9I (uniprotkb:Q02934) and Cel9I (uniprotkb:Q02934) bind (MI:0407) by isothermal titration calorimetry (MI:0065)MINT-6946706:Cel9I (uniprotkb:Q02934) binds (MI:0407) to Cel9I (uniprotkb:Q02934) by pull down (MI:0096)