Search

New instruments sensitive to chromospheric radiation at X-ray, UV, Visible, IR, and sub-mm wavelengths have become available that significantly enhance our ability to understand the bi-directional flow of energy through the chromosphere. We describe the calibration, co-alignment, initial results, and public release of a new data set combining a large number of these instruments to obtain multi-wavelength photospheric, chromospheric, and coronal observations capable of improving our understanding of the connectivity between the photosphere and the corona via transient brightenings and wave signatures. The observations center on a bipolar region of enhanced network magnetic flux near disk center on SOL2017-03-17T14:00-17:00. The comprehensive data set provides one of the most complete views of chromospheric activity related to small scale brightenings in the corona and chromosphere to date. Our initial analysis shows strong spatial correspondence between the areas of broadest width of the Hydrogen-$\alpha$ spectral line and the hottest temperatures observed in ALMA Band 3 radio data, with a linear coefficient of $6.12\times 10^{-5}$\AA{}/K. The correspondence persists for the duration of co-temporal observations ($\approx 60$ minutes). Numerous transient brightenings were observed in multiple data series. We highlight a single, well observed transient brightening along a set of thin filamentary features with a duration of 20 minutes. The timing of the peak intensity transitions from the cooler (ALMA, 7000 K) to hotter (XRT, 3 MK) data series., Comment: 22 pages, 15 figures, accepted by ApJS

The FOXSI-4 sounding rocket will fly a significantly upgraded instrument in NASA's first solar are campaign. It will deploy direct X-ray focusing optics which have revolutionized our understanding of astrophysical phenomena. For example, they have allowed NuSTAR to provide X-ray imaging and IXPE (scheduled for launch in 2021) to provide X-ray polarization observations with detectors with higher photon rate capability and greater sensitivity than their predecessors. The FOXSI sounding rocket is the first solar dedicated mission using this method and has demonstrated high sensitivity and improved imaging dynamic range with its three successful flights. Although the building blocks are already in place for a FOXSI satellite instrument, further advances are needed to equip the next generation of solar X-ray explorers. FOXSI-4 will develop and implement higher angular resolution optics/detector pairs to investigate fine spatial structures (both bright and faint) in a solar are. FOXSI-4 will use highly polished electroformed Wolter-I mirrors fabricated at the NASA/Marshall Space Flight Center (MSFC), together with finely pixelated Si CMOS sensors and fine-pitch CdTe strip detectors provided by a collaboration with institutes in Japan. FOXSI-4 will also implement a set of novel perforated attenuators that will enable both the low and high energy spectral components to be observed simultaneously in each pixel, even at the high rates expected from a medium (or large) size solar are. The campaign will take place during one of the Parker Solar Probe (PSP) perihelia, allowing coordination between this spacecraft and other instruments which observe the Sun at different wavelengths.

Objective:Describe the epidemiological and molecular characteristics of an outbreak ofKlebsiella pneumoniaecarbapenemase (KPC)–producing organisms and the novel use of a cohorting unit for its control.Design:Observational study.Setting:A 566-room academic teaching facility in Milwaukee, Wisconsin.Patients:Solid-organ transplant recipients.Methods:Infection control bundles were used throughout the time of observation. All KPC cases were intermittently housed in a cohorting unit with dedicated nurses and nursing aids. The rooms used in the cohorting unit had anterooms where clean supplies and linens were placed. Spread of KPC-producing organisms was determined using rectal surveillance cultures on admission and weekly thereafter among all consecutive patients admitted to the involved units. KPC-positive strains underwent pulsed-field gel electrophoresis and whole-genome sequencing.Results:A total of 8 KPC cases (5 identified by surveillance) were identified from April 2016 to April 2017. After the index patient, 3 patients acquired KPC-producing organisms despite implementation of an infection control bundle. This prompted the use of a cohorting unit, which immediately halted transmission, and the single remaining KPC case was transferred out of the cohorting unit. However, additional KPC cases were identified within 2 months. Once the cohorting unit was reopened, no additional KPC cases occurred. The KPC-positive species identified during this outbreak includedKlebsiella pneumoniae,Enterobacter cloacaecomplex, andEscherichia coli. blaKPCwas identified on at least 2 plasmid backbones.Conclusions:A complex KPC outbreak involving both clonal and plasmid-mediated dissemination was controlled using weekly surveillances and a cohorting unit.

The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a slit spectrograph designed to fly on a sounding-rocket and to observe the Sun in soft X-rays (SXRs) to determine the frequency of coronal heating events. The MaGIXS wavelength range (≈ 0.6 – 2.5 nm) has a significant number of diagnostic lines formed at coronal temperatures, but developing SXR instrumentation presents several challenges, including how to efficiently perform context imaging. A slitjaw image is required for pointing the instrument during flight and for co-alignment with coordinated data sets after flight, but operating in the SXR regime implies that a simple normal-incidence optical system could not be employed to image the same wavelength range as the spectrograph. Therefore, to avoid the complexity of additional grazing-incidence optics, the MaGIXS slitjaw system is designed to image in the extreme ultraviolet (EUV) between roughly 20 – 80 nm. The temperature sensitivity of this EUV bandpass will observe complementary features visible to the MaGIXS instrument. The image on the slitjaw is then converted, via a phosphor coating, to readily detectable visible light. Presented here is the design, implementation, and characterization of the MaGIXS slitjaw imaging system. The slitjaw instrument is equipped with an entrance filter that passes EUV light, along with X-rays, onto the slit, exciting a fluorescent coating and causing it to emit in the visible. This visible light can then be imaged by a simple implementation of commercial off-the-shelf (COTS) optics and low-light camera. Such a design greatly reduces the complexity of implementing and testing the slitjaw imager for an X-ray instrument system and will accomplish the pointing and co-alignment requirements for MaGIXS.

The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a NASA sounding rocket instrument designed and built to observe X-ray emissions from the Sun's atmosphere in the 6-24A (0 5-2 0keV) range while achieving high spectral and spatial resolution along a 8-arcminute long slit We describe the alignment process and discuss the results achieved for assembling the Telescope Mirror Assembly (TMA) and the Spectrometer Optics Assembly (SOA) prior to final integration into the MaGIXS instrument The MaGIXS mirrors are full shell, electroformed nickel replicated on highly polished mandrels at the Marshall Space Flight Center (MSFC) The TMA carries a single shell, Wolter Type-1 mirror pair (primary and secondary) formed on a common mandrel The SOA includes a matched pair of identical parabolic mirrors and a planar varied-line spacing (VLS) diffraction grating We performed the subassembly alignment and mounting at the Smithsonian Astrophysical Observatory (SAO) using metrology and precision positioning systems constructed around the Centroid Detector Assembly (CDA), originally built for the alignment of the Chandra mirror shells The MaGIXS instrument launch has been postponed until 2021 due to the COVID-19 pandemic © 2020 SPIE

The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a sounding rocket experiment that observes the soft X-ray spectrum of the Sun from 6.0–24 Å (0.5–2.0 keV), successfully launched on 2021 July 30. End-to-end alignment of the flight instrument and calibration experiments are carried out using the X-ray and Cryogenic Facility at NASA Marshall Space Flight Center. In this paper, we present the calibration experiments of MaGIXS, which include wavelength calibration, measurement of line spread function, and determination of effective area. Finally, we use the measured instrument response function to predict the expected count rates for MaGIXS flight observation looking at a typical solar active region.

Following the success of the first mission, the High-Resolution Coronal Imager (Hi-C) was launched for a third time (Hi-C 2.1) on 29th May 2018 from the White Sands Missile Range, NM, USA. On this occasion, 329 seconds of 17.2 nm data of target active region AR 12712 was captured with a cadence of ~4s, and a plate scale of 0.129''/pixel. Using data captured by Hi-C 2.1 and co-aligned observations from SDO/AIA 17.1 nm we investigate the widths of 49 coronal strands. We search for evidence of substructure within the strands that is not detected by AIA, and further consider whether these strands are fully resolved by Hi-C 2.1. With the aid of Multi-Scale Gaussian Normalization (MGN), strands from a region of low-emission that can only be visualized against the contrast of the darker, underlying moss are studied. A comparison is made between these low-emission strands with those from regions of higher emission within the target active region. It is found that Hi-C 2.1 can resolve individual strands as small as ~202km, though more typical strands widths seen are ~513km. For coronal strands within the region of low-emission, the most likely width is significantly narrower than the high-emission strands at ~388km. This places the low-emission coronal strands beneath the resolving capabilities of SDO/AIA, highlighting the need of a permanent solar observatory with the resolving power of Hi-C., 19 pages, 10 images, 3 tables

The Marshall Grazing Incidence Spectrometer {\it MaGIXS} is a sounding rocket experiment that will observe the soft X-ray spectrum of the Sun from 24 - 6.0 \AA\ (0.5 - 2.0 keV) and is scheduled for launch in 2021. Component and instrument level calibrations for the {\it MaGIXS} instrument are carried out using the X-ray and Cryogenic Facility (XRCF) at NASA Marshall Space Flight Center. In this paper, we present the calibration of the incident X-ray flux from the electron impact source with different targets at the XRCF using a CCD camera; the photon flux at the CCD was low enough to enable its use as a "photon counter" i.e. the ability to identify individual photon hits and calculate their energy. The goal of this paper is two-fold: 1) to confirm that the flux measured by the XRCF beam normalization detectors is consistent with the values reported in the literature and therefore reliable for {\it MaGIXS} calibration and 2) to develop a method of counting photons in CCD images that best captures their number and energy, Comment: 11 pages, 8 figures, Accepted for publication in The Astrophysical Journal

The SunPy Project developed a 13-question survey to understand the software and hardware usage of the solar-physics community. Of the solar-physics community, 364 members across 35 countries responded to our survey. We found that $99\pm 0.5$99±0.5% of respondents use software in their research and 66% use the Python scientific-software stack. Students are twice as likely as faculty, staff scientists, and researchers to use Python rather than Interactive Data Language (IDL). In this respect, the astrophysics and solar-physics communities differ widely: 78% of solar-physics faculty, staff scientists, and researchers in our sample uses IDL, compared with 44% of astrophysics faculty and scientists sampled by Momcheva and Tollerud (2015). $63\pm 4$63±4% of respondents have not taken any computer-science courses at an undergraduate or graduate level. We also found that most respondents use consumer hardware to run software for solar-physics research. Although 82% of respondents work with data from space-based or ground-based missions, some of which (e.g. the Solar Dynamics Observatory and Daniel K. Inouye Solar Telescope) produce terabytes of data a day, 14% use a regional or national cluster, 5% use a commercial cloud provider, and 29% use exclusively a laptop or desktop. Finally, we found that $73\pm 4$73±4% of respondents cite scientific software in their research, although only $42\pm 3$42±3% do so routinely.

The goal of the SunPy project is to facilitate and promote the use and development of community-led, free, and open source data analysis software for solar physics based on the scientific Python environment. The project achieves this goal by developing and maintaining the sunpy core package and supporting an ecosystem of affiliated packages. This paper describes the first official stable release (version 1.0) of the core package, as well as the project organization and infrastructure. This paper concludes with a discussion of the future of the SunPy project. NSFNational Science Foundation (NSF) [AST-1715122]; DIRAC Institute in the Department of Astronomy at the University of Washington; STFC studentshipScience & Technology Facilities Council (STFC) [ST/N504336/1]; STFC grantScience & Technology Facilities Council (STFC) [ST/N000692/1]; Google; NumFocus; Solar Physics Division of the American Astronomical Society; Space program The following individuals recognize support for their personal contributions. B.M.S. is supported by the NSF grant AST-1715122 and acknowledges support from the DIRAC Institute in the Department of Astronomy at the University of Washington. The DIRAC Institute is supported through generous gifts from the Charles and Lisa Simonyi Fund for Arts and Sciences, and the Washington Research Foundation. D.S. was supported by STFC studentship ST/N504336/1 and STFC grant ST/N000692/1.; We acknowledge financial contributions from Google as part of the Google Summer of Code program and from the Space program. We acknowledge financial contributions from NumFocus for improving the usability of SunPy's Data Downloader. Additionally, we acknowledge current and future funding from the Solar Physics Division of the American Astronomical Society for SunPy workshops and tutorials at annual meetings.; This work has made use of data from the European Space Agency (ESA) mission Gaia,80 processed by the Gaia Data Processing and Analysis Consortium (DPAC).81 Funding for the DPAC has been provided by national institutions, in particular, the institutions participating in the Gaia Multilateral Agreement.

We examine 172 Ang ultra-high-resolution images of a solar plage region from the Hi-C 2.1 ("Hi-C") rocket flight of 2018 May 29. Over its five-minute flight, Hi-C resolves a plethora of small-scale dynamic features that appear near noise level in concurrent Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA) 171 Ang images. For ten selected events, comparisons with AIA images at other wavelengths and with the Interface Region Imaging Spectrograph (IRIS) images indicate that these features are cool (compared to the corona) ejections. Combining Hi-C 172 Ang, AIA 171 Ang, IRIS 1400 Ang, and H$\alpha$, we see that these ten cool ejections are similar to the H$\alpha$ "dynamic fibrils" and Ca ii "anemone jets" found in earlier studies. The front of some of our cool ejections are likely heated, showing emission in IRIS 1400 Ang. On average, these cool ejections have approximate widths: $3''.2 \pm 2''.1$, (projected) maximum heights and velocities: $4''.3 \pm 2''.5$ and $23 \pm 6$ km/s, and lifetimes: $6.5 \pm 2.4$ min. We consider whether these Hi-C features might result from eruptions of sub-minifilaments (smaller than the minifilaments that erupt to produce coronal jets). Comparisons with SDO's Helioseismic and Magnetic Imager (HMI) magnetograms do not show magnetic mixed-polarity neutral lines at these events' bases, as would be expected for true scaled-down versions of solar filaments/minifilaments. But the features' bases are all close to single-polarity strong-flux-edge locations, suggesting possible local opposite-polarity flux unresolved by HMI. Or, it may be that our Hi-C ejections instead operate via the shock-wave mechanism that is suggested to drive dynamic fibrils and the so-called type I spicules.

The third flight of the High-Resolution Coronal Imager (Hi-C 2.1) occurred on May 29, 2018, the Sounding Rocket was launched from White Sands Missile Range in New Mexico. The instrument has been modified from its original configuration (Hi-C 1) to observe the solar corona in a passband that peaks near 172 Angstrom and uses a new, custom-built low-noise camera. The instrument targeted Active Region 12712, and captured 78 images at a cadence of 4.4 sec (18:56:22 - 19:01:57 UT; 5 min and 35 sec observing time). The image spatial resolution varies due to quasi-periodic motion blur from the rocket; sharp images contain resolved features of at least 0.47 arcsec. There are coordinated observations from multiple ground- and space-based telescopes providing an unprecedented opportunity to observe the mass and energy coupling between the chromosphere and the corona. Details of the instrument and the data set are presented in this paper., Comment: 26 pages, 15 figures, submitted to Solar Physics

X-ray observations of astronomical objects provides diagnostics not available in any other wavelength regime, however the capability of making these observation at a high spatial resolution has proven challenging. Recently, NASA Marshall Space Flight Center (MSFC) has made good progress in employing computer numerical control (CNC) polishing techniques on electroless nickel mandrels as part of our replicated grazing incidence optics program. CNC polishing has afforded the ability to deterministically refine mandrel figure, thereby improving mirror performance. The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a MSFC-led sounding rocket instrument that is designed to make the first ever soft x-ray spectral observations of the Sun spatially resolved along a narrow slit. MaGIXS incorporates some of the first mirrors produced at MSFC using this polishing technique. Here we present the predicted mirror performance obtained from metrology, after completion of CNC polishing, as well as the results of X-ray tests performed on the MaGIXS telescope mirror before and after mounting.

We have investigated an M1.3 limb flare, which develops as a magnetic loop/arch that fans out from an X-ray jet. Using Hinode/EIS, we found that the temperature increases with height to a value of over 10$^{7}$ K at the loop-top during the flare. The measured Doppler velocity (redshifts of 100$-$500 km s$^{-1}$) and the non-thermal velocity ($\geq$100 km s$^{-1}$) from Fe XXIV also increase with loop height. The electron density increases from $0.3\times10^{9}$ cm$^{-3}$ early in the flare rise to $1.3\times10^{9}$ cm$^{-3}$ after the flare peak. The 3-D structure of the loop derived with STEREO/EUVI indicates that the strong redshift in the loop-top region is due to upflowing plasma originating from the jet. Both hard X-ray and soft X-ray emission from RHESSI were only seen as footpoint brightenings during the impulsive phase of the flare, then, soft X-ray emission moves to the loop-top in the decay phase. Based on the temperature and density measurements and theoretical cooling models, the temperature evolution of the flare arch is consistent with impulsive heating during the jet eruption followed by conductive cooling via evaporation and minor prolonged heating in the top of the fan loop. Investigating the magnetic field topology and squashing factor map from SDO/HMI, we conclude that the observed magnetic-fan flaring arch is mostly heated from low atmospheric reconnection accompanying the jet ejection, instead of from reconnection above the arch as expected in the standard flare model., 55 pages, 21 Figures, accepted for publication in ApJ

We present high-resolution, high-cadence observations of six, fine-scale, on-disk jet-like events observed by the High-resolution Coronal Imager 2.1 (Hi-C 2.1) during its sounding-rocket flight. We combine the Hi-C 2.1 images with images from SDO/AIA, and IRIS, and investigate each event's magnetic setting with co-aligned line-of-sight magnetograms from SDO/HMI. We find that: (i) all six events are jetlet-like (having apparent properties of jetlets), (ii) all six are rooted at edges of magnetic network lanes, (iii) four of the jetlet-like events stem from sites of flux cancelation between majority-polarity network flux and merging minority-polarity flux, and (iv) four of the jetlet-like events show brightenings at their bases reminiscent of the base brightenings in coronal jets. The average spire length of the six jetlet-like events (9,000$\pm$3000km) is three times shorter than that for IRIS jetlets (27,000$\pm$8000km). While not ruling out other generation mechanisms, the observations suggest that at least four of these events may be miniature versions of both larger-scale coronal jets that are driven by minifilament eruptions and still-larger-scale solar eruptions that are driven by filament eruptions. Therefore, we propose that our Hi-C events are driven by the eruption of a tiny sheared-field flux rope, and that the flux-rope field is built and triggered to erupt by flux cancelation., 10 pages, 5 figures, 1 Table, accepted for publication in ApJ Letters

Background We recently implemented a hospital-wide C. difficile testing algorithm and screening/isolation of C. difficile asymptomatic carriers primarily in heme-onc units. We aim to evaluate the impact of these interventions on the epidemiology of C. difficile + tests. Methods This retrospective cohort was performed in a 600-bed hospital in Milwaukee, WI, from January 1, 2016 to March 31, 2019. All clinical C. difficile tests included nucleic acid amplification (NAAT; Xpert C. difficile, Cepheid). On February 2017, all NAAT+ tests had toxin (tox) checked (Quick check complete, Alere). Testing algorithm (Figure 1) started mid 2016 until now. Screening phases included: Phase 1 (September 2016–May 2017): C. difficile screening cultures shared with units but not placed in electronic medical records (EMR). Patients + placed on enteric precautions (gown, gloves, hand hygiene). Phase 2 (May 2017–January 2018): C. difficile screening (NAAT) performed on admission and weekly thereafter, results placed in EMR, NAAT+ patients placed on enteric precautions. Phase 3 (January 2018–present): C. difficile screening (NAAT) on admission, results placed in EMR, NAAT+ patients placed on enteric precautions. Federal reporting changed to only reporting NAAT+tox+. Tests (NAAT+, NAAT+tox+, and NAAT+tox-) were analyzed using Poisson regression offsetting for log of patient-days using SAS, v9.4. Results Hospital-wide C. difficile tests decreased from 21 to 10.9 tests per 1,000 patient-days (P < 0.0001; Figure 2). This effect was seen in heme-onc units (41 to 15.7; P < 0.0001; Figure 3) and in all other units (18.9 to 9.9; P < 0.0001). All NAAT+ results decreased from 2.99 to 1.94 per 1,000 patient-days hospital wide (P < 0.0001) but remained unchanged in heme-onc units (4.6 to 3.7, P > 0.05). NAAT+tox+ results remained unchanged hospital wide and in heme-onc units (0.8 to 0.7 and 1.1 to 1.2, respectively; both P > 0.05); however, the frequency of NAAT+tox− tests decreased hospital wide (1.8 to 1.3; P = 0.0003) and in heme-onc units (3.8 to 2.4; P = 0.05). Conclusion A C. difficile testing algorithm was successful decreasing the number of C. difficile tests performed and had a hospital-wide reduction of NAAT+tox− tests. The rate of NAAT+tox+ cases in heme-onc units and hospital wide remained unchanged despite active screening and isolation in selected units. Disclosures All authors: No reported disclosures.

The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a NASA sounding rocket instrument designed to obtain spatially resolved soft X-ray spectra of the solar atmosphere in the 6–24 A (0.5–2.0 keV) range. The instrument consists of a single shell Wolter Type-I telescope, a slit, and a spectrometer comprising a matched pair of grazing incidence parabolic mirrors and a planar varied-line space diffraction grating. The instrument is designed to achieve a 50 mA spectral resolution and 5 arcsecond spatial resolution along a ±4-arcminute long slit, and launch is planned for 2019. We report on the status and our approaches for fabrication and alignment for this novel optical system. The telescope and spectrometer mirrors are replicated nickel shells, and are currently being fabricated at the NASA Marshall Space Flight Center. The diffraction grating is currently under development by the Massachusetts Institute of Technology (MIT); because of the strong line spacing variation across the grating, it will be fabricated through e-beam lithography.

The High-Resolution Coronal Imager (Hi-C) was flown on a NASA sounding rocket on 11 July 2012. The goal of the Hi-C mission was to obtain high-resolution (≈ 0.3 – 0.4′′), high-cadence (≈ 5 seconds) images of a solar active region to investigate the dynamics of solar coronal structures at small spatial scales. The instrument consists of a normal-incidence telescope with the optics coated with multilayers to reflect a narrow wavelength range around 19.3 nm (including the Fe xii 19.5-nm spectral line) and a 4096×4096 camera with a plate scale of 0.1′′ pixel−1. The target of the Hi-C rocket flight was Active Region 11520. Hi-C obtained 37 full-frame images and 86 partial-frame images during the rocket flight. Analysis of the Hi-C data indicates the corona is structured on scales smaller than currently resolved by existing satellite missions.

We investigated the possibility of diagnosing the degree of departure from the Maxwellian distribution using the Fe XVII - Fe XVIII spectra originating in plasmas in collisional ionization equilibrium, such as in the cores of solar active regions or microflares. The original collision strengths for excitation are integrated over the non-Maxwellian electron $\kappa$-distributions characterized by a high-energy tail. Synthetic X-ray emission line spectra were calculated for a range of temperatures and $\kappa$. We focus on the 6-24 A spectral range to be observed by the upcoming Marshall Grazing-Incidence X-ray Spectrometer MaGIXS. We find that many line intensity ratios are sensitive to both $T$ and $\kappa$. Best diagnostic options are provided if a ratio involving both Fe XVII and Fe XVIII is combined with another ratio involving lines formed within a single ion. The sensitivity of such diagnostics to $\kappa$ is typically a few tens of per cent. Much larger sensitivity, of about a factor of two to three, can be obtained if the Fe XVIII 93.93 A line observed by SDO/AIA is used in conjuction with the X-ray lines. We conclude that the MaGIXS instrument is well-suited for detection of departures from the Maxwellian distribution, especially in active region cores., Comment: Astronomy & Astrophysics, accepted

Magnetic loops filled with hot plasma are the main building blocks of the solar corona. Usually they have lengths of the order of the barometric scale height in the corona that is 50 Mm. Previously it has been suggested that miniature versions of hot loops exist. These would have lengths of only 1 Mm barely protruding from the chromosphere and spanning across just one granule in the photosphere. Such short loops are well established at transition region temperatures (0.1 MK), and we investigate if such miniature loops also exist at coronal temperatures (>1 MK). We used extreme UV imaging (EUV) observations from the High-resolution Coronal Imager (Hi-C) at an unprecedented spatial resolution of 0.3" to 0.4". Together with EUV imaging and magnetogram data from the Solar Dynamics Observatory (SDO) and X-Ray Telescope (XRT) data from Hinode we investigated the spatial, temporal and thermal evolution of small loop-like structures in the solar corona above a plage region close to an active region and compared this to a moss area within the active region. We find that the size, motion and temporal evolution of the loop-like features are consistent with photospheric motions, suggesting a close connection to the photospheric magnetic field. Aligned magnetograms show that one of their endpoints is rooted at a magnetic concentration. Their thermal structure, as revealed together with the X-ray observations, shows significant differences to moss-like features. Considering different scenarios, these features are most probably miniature versions of hot loops rooted at magnetic concentrations at opposite sides of a granule in small emerging magnetic loops (or flux tubes)., 13 pages, 13 figures, accepted for publication in A&A (Nov 4, 2016)

The Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) is a NASA sounding rocket instrument that is designed to observe soft X-ray emissions from 24 - 6.0 A (0.5 - 2.0 keV energies) in the solar atmosphere. For the rst time, high-temperature, low-emission plasma will be observed directly with 5 arcsecond spatial resolution and 22 mA spectral resolution. The unique optical design consists of a Wolter - I telescope and a 3-optic grazing- incidence spectrometer. The spectrometer utilizes a nite conjugate mirror pair and a blazed planar, varied line spaced grating, which is directly printed on a silicon substrate using e-beam lithography. The grating design is being nalized and the grating will be fabricated by the Massachusetts Institute of Technology (MIT) and Izentis LLC. Marshall Space Flight Center (MSFC) is producing the nickel replicated telescope and spectrometer mirrors using the same facilities and techniques as those developed for the ART-XC and FOXSI mirrors. The Smithsonian Astrophysical Observatory (SAO) will mount and align the optical sub-assemblies based on previous experience with similar instruments, such as the Hinode X-Ray Telescope (XRT). The telescope and spectrometer assembly will be aligned in visible light through the implementation of a theodolite and reference mirrors, in addition to the centroid detector assembly (CDA) { a device designed to align the AXAF-I nested mirrors. Focusing of the telescope and spectrometer will be achieved using the X-ray source in the Stray Light Facility (SLF) at MSFC. We present results from an alignment sensitivity analysis performed on the on the system and we also discuss the method for aligning and focusing MaGIXS.

We present an overview of solar sounding rocket instruments developed jointly by NASA Marshall Space Flight Center and the University of Alabama in Huntsville. The High Resolution Coronal Imager (Hi-C) is an EUV (19.3 nm) imaging telescope which was flown successfully in July 2012. The Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP) is a Lyman Alpha (121.6 nm) spectropolarimeter developed jointly with the National Astronomical Observatory of Japan and scheduled for launch in 2015. The Marshall Grazing Incidence X-ray Spectrograph is a soft X-ray (0.5-1.2 keV) stigmatic spectrograph designed to achieve 5 arcsecond spatial resolution along the slit.

In the summer of 2012, the High-resolution Coronal Imager (Hi-C) flew aboard a NASA sounding rocket and collected the highest spatial resolution images ever obtained of the solar corona. One of the goals of the Hi-C flight was to characterize the substructure of the solar corona. We therefore examine how the intensity scales from AIA resolution to Hi-C resolution. For each low-resolution pixel, we calculate the standard deviation in the contributing high-resolution pixel intensities and compare that to the expected standard deviation calculated from the noise. If these numbers are approximately equal, the corona can be assumed to be smoothly varying, i.e. have no evidence of substructure in the Hi-C image to within Hi-C's ability to measure it given its throughput and readout noise. A standard deviation much larger than the noise value indicates the presence of substructure. We calculate these values for each low-resolution pixel for each frame of the Hi-C data. On average, 70 percent of the pixels in each Hi-C image show no evidence of substructure. The locations where substructure is prevalent is in the moss regions and in regions of sheared magnetic field. We also find that the level of substructure varies significantly over the roughly 160 s of the Hi-C data analyzed here. This result indicates that the finely structured corona is concentrated in regions of heating and is highly time dependent.