Search

Surfboard paddling is an essential activity when surfing. Research investigating surfboard paddling, especially as it pertains to neuromechanical control and techniques used, is limited. Previous research made use of swim ergometers to examine surfboard paddling demands. The validity of using swim ergometers in surfboard paddling research and training deserves further analysis. To establish ecologically valid findings, researchers have begun to use swim flumes and still-water paddling environments to investigate paddling efficiency and technique. This emerging body of research has reported that muscle activation patterns, intensities, and timings differ as surfers move through different paddle stroke phases. A deeper understanding of paddling's neuromechanical control may help enhance the understanding of how to improve paddle performance and perhaps reduce injury risk. Therefore, the purpose of this review was to identify the gaps in the existing literature to help identify future research directions in relation to surfboard paddling techniques and neuromechanical control. [ABSTRACT FROM AUTHOR]

Surfboard manufacturing has begun to utilise Expanded Polystyrene as a core material; however, surf literature relatively ignores this material. This manuscript investigates the mechanical behaviour of Expanded Polystyrene (EPS) sandwich composites. An epoxy resin matrix was used to manufacture ten sandwich-structured composite panels with varying fabric reinforcements (carbon fibre, glass fibre, PET) and two foam densities. The flexural, shear, fracture, and tensile properties were subsequently compared. Under common flexural loading, all composites failed via compression of the core, which is known in surfing terms as creasing. However, crack propagation tests indicated a sudden brittle failure in the E-glass and carbon fibre facings and progressive plastic deformation for the recycled polyethylene terephthalate facings. Testing showed that higher foam density increased the flex and fracture mechanical properties of composites. Overall, the plain weave carbon fibre presented the highest strength composite facing, while the single layer of E-glass was the lowest strength composite. Interestingly, the double-bias weave carbon fibre with a lower-density foam core presented similar stiffness behaviour to standard E-glass surfboard materials. The double-biased carbon also improved the flexural strength (+17%), material toughness (+107%), and fracture toughness (+156%) of the composite compared to E-glass. These findings indicate surfboard manufacturers can utilise this carbon weave pattern to produce surfboards with equal flex behaviour, lower weight and improved resistance to damage in regular loading. [ABSTRACT FROM AUTHOR]

The footwear processes generate a large amount of waste on the soles' cutting and finishing steps. Styrene–butadiene rubber (SBR) is commonly used as feedstock for soles, mainly presenting good abrasion resistance, deformation and durability. These features make SBR a candidate for the manufacturing of non-slip surfaces, that provide softness, low density and wear resistance. The objective of this work was to develop a polymeric matrix composite material, using SBR scraps, from the shoes' production, to design the non-slip surfboard decks. Composites, composed by different ratios of SBR (i.e., 20, 40, and 60 wt.%) and polymer matrices (i.e., polyvinylchloride (PVC), ethyl vinyl acetate (EVA), and styrene–butadiene styrene (SBS) rubber) were developed and characterized by tensile, morphological and apparent density. The main results showed that the SBS/SBR composite closely met the adhesion requirements for the final application, containing 20 wt.% SBR scraps. [ABSTRACT FROM AUTHOR]

Copyright of Cuadernos del Centro de Estudios de Diseño y Comunicación is the property of Cuadernos del Centro de Estudios de Diseno y Comunicacion and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Surfboard manufacturing has begun to utilise Expanded Polystyrene as a core material; however, surf literature relatively ignores this material. This manuscript investigates the mechanical behaviour of Expanded Polystyrene (EPS) sandwich composites. An epoxy resin matrix was used to manufacture ten sandwich-structured composite panels with varying fabric reinforcements (carbon fibre, glass fibre, PET) and two foam densities. The flexural, shear, fracture, and tensile properties were subsequently compared. Under common flexural loading, all composites failed via compression of the core, which is known in surfing terms as creasing. However, crack propagation tests indicated a sudden brittle failure in the E-glass and carbon fibre facings and progressive plastic deformation for the recycled polyethylene terephthalate facings. Testing showed that higher foam density increased the flex and fracture mechanical properties of composites. Overall, the plain weave carbon fibre presented the highest strength composite facing, while the single layer of E-glass was the lowest strength composite. Interestingly, the double-bias weave carbon fibre with a lower-density foam core presented similar stiffness behaviour to standard E-glass surfboard materials. The double-biased carbon also improved the flexural strength (+17%), material toughness (+107%), and fracture toughness (+156%) of the composite compared to E-glass. These findings indicate surfboard manufacturers can utilise this carbon weave pattern to produce surfboards with equal flex behaviour, lower weight and improved resistance to damage in regular loading.

Recreational surf-cameras (surfcams) are ubiquitous along many coastlines, and yet are a largely untapped source of coastal morphodynamic observations. Surfcams offer broad spatial coverage and flexibility in data collection, but a method to remotely acquire ground control points (GCPs) and initial camera parameter approximations is necessary to better leverage this existing infrastructure to make quantitative measurements. This study examines the efficacy of remotely monitoring coastal morphodynamics from surfcams at two sites on the Atlantic coast of Florida, U.S.A., by leveraging freely available airborne lidar observations to acquire remote-GCPs and open-source web tools for camera parameter approximations, ignoring lens distortion. Intrinsic and extrinsic camera parameters are determined using a modified space resection procedure, wherein parameters are determined using iterative adjustment while fitting to remote-GCPs and initial camera parameter approximations derived from justified assumptions and Google Earth. This procedure is completed using the open-source Surf-Camera Remote Calibration Tool (SurfRCaT). The results indicate root mean squared horizontal reprojection errors at the two cameras of 3.43 m and 6.48 m. Only immobile hard structures such as piers, jetties, and boulders are suitable as remote-GCPs, and the spatial distribution of available points is a likely reason for the higher accuracy at one camera relative to the other. Additionally, lens distortion is not considered in this work. This is another important source of error and including it in the methodology is highlighted as a useful avenue for future work. Additional factors, such as initial camera parameter approximation accuracy, likely play a role as well. This work illustrates that, provided there is sufficient remote-GCP availability and small lens distortion, remote video monitoring of coastal areas with existing surfcams could provide a usable source of coastal morphodynamic observations. This is further explored with a shoreline change analysis from the higher-accuracy camera. It was found that only the largest (>6 m) magnitude shoreline changes exceed the observational uncertainty driven by shoreline mapping error and reprojection error, indicating that remotely calibrated surfcams can provide observations of seasonal or storm-driven signals. [ABSTRACT FROM AUTHOR]

Featured Application: This study builds on the fundamental understanding of surfboard fin design. This research identifies quantitative performance differences between the fin parameters used by surfers. These results aim to help both fin designers and surfers tailor fin choices to specific surfing styles/waves. Surfing is a popular sport, with the associated market forecast to reach 2.6 billion US dollars by 2027. In the published literature, there is a range of investigations into the performance of surfboard fins. Some studies model a single fin or review the performance of different fin layouts and surface designs. However, the effects of individual fin design features on flow dynamics are not well understood. This study provides numerical analysis into the thruster fin aspects (rake, depth, and base length) and resultant key performance indicators (i) lift and drag coefficients, and (ii) turbulent kinetic energy. The models were simulated in Ansys Fluent R19.1, solving steady Reynolds-averaged Navier–Stokes equations using the SST k−ω turbulence model at a velocity of 7 m/s. The results indicate the performance of fins varies more post-stall. The variations in rake showed the biggest impact on the turbulence intensity at an angle ≥20°. The variations in base length exhibited coefficient trends with greater lift at small angles but significant lift losses at high angles of attack. The variations in depth affected the forces on the fins rather than the performance indicators. Based on these simulations, a proposed fin set was developed that presented the lowest lift losses after the stall point. [ABSTRACT FROM AUTHOR]