Search

Mixed grain‐size bedforms comprise alternating sand‐rich and poorly sorted mud‐rich laminae and bands. These bedforms have been identified in distal submarine settings formed underneath unidirectional flows. This study documents mixed grain‐size bedforms in a proximal submarine slope setting formed beneath both unidirectional and combined flows. Core and outcrop data with well‐constrained palaeogeographical context are used to describe two types of mixed grain‐size bedform. Type A bedforms comprise mud‐rich current ripples and low‐amplitude bed‐waves with alternating concave and planar sandstone–mudstone foresets that pass into mud‐rich troughs, and aggradational sinusoidal laminasets. Type B bedforms consist of sandstone–mudstone laminasets that comprise rounded, biconvex ripples with sigmoidal‐shaped foresets and swale and hummock‐like laminasets and banded sets. These bedforms occur in channel‐margin, internal‐levée and external‐levée, intraslope and disconnected lobe environments, and represent 27 to 63% by stratigraphic thickness of the studied successions. They are interpreted as deposits of clay‐rich transitional flows, whose depositional style is governed by the balance of cohesive and turbulent forces, and the rate of flow deceleration. Type B bedforms are further interpreted as combined transitional flow deposits, resulting from flow deflection and ponding processes by seabed topography. Upward and lateral transitions between different bedforms create distinct bedform sequences, demonstrating progressive spatio‐temporal transformations in flow properties and their topographic interactions. By using a well‐constrained palaeogeographical setting, mixed grain‐size bedforms are shown to be situated close to sites of erosion into muddy substrates, abrupt losses in confinement, and/or changes in slope gradient. These bedforms demonstrate that flow transformation and transitional flow behaviour are not restricted to distal submarine settings. Furthermore, mixed grain‐size bedforms are not a diagnostic criterion for bottom currents, because such flows cannot account for the high mud content in laminasets, or the interlamination of sand and mud. [ABSTRACT FROM AUTHOR]

Autogenic feedbacks can produce large‐scale, organized stratigraphic patterns in alluvial fans, but autogenic depositional signatures of specific upstream boundary conditions remain challenging to interpret. Here, a combination of theory, experiment and field application is used to explore how autogenic lithofacies changes can be interpreted as stratigraphic indicators of upstream boundary conditions. Six experiments were conducted to test the effects of sediment supply and water discharge rates on autogenic advance and retreat of the lithofacies boundary (grain‐size transition) in an alluvial fan with two dominant grain sizes. Migration of the grain‐size transition caused a short‐term zigzag pattern in the grain‐size transition position in the dip‐directional deposit section. For each experiment, time‐lapse images and laser topographic scans of the fan surface and stratigraphic cross‐sections of the final deposits were used to quantify characteristic timescales of autogenic processes. Timescales for fan‐margin migration, surface wet‐fraction change and grain‐size transition migration generally shorten as sediment supply rate increases and water discharge rate decreases. Increasing the sediment supply rate shortens the duration of the fluvial sediment storage and release cycle, producing higher frequency zigzags in the grain‐size transition trajectory. Increasing the water discharge tends to widen channels and lengthens the duration of the fluvial sediment storage and release cycle, constructing lower frequency zigzags in the grain‐size transition trajectory. Increasing the water discharge also enables more sediment to transport further downstream during release events, leading to higher magnitude zigzags in the grain‐size transition trajectory. These relationships between upstream boundary conditions and the grain‐size transition trajectory demonstrate how autogenic stratigraphic signals could be used as a tool to infer relative changes in boundary conditions. [ABSTRACT FROM AUTHOR]

In ancient records, discrimination of specific triggering events from sediment gravity flow deposits is very difficult, due to multiple interactions between triggering events and similar sedimentary characteristics. For this study, we introduce the Hakcheon-Chogok Megaturbidite (HCM) in the Miocene Pohang-Youngduk Basin (PYB), providing an opportunity to differentiate the triggering events. This megaturbidite is over 70 m thick in the proximal part and less than 4 m thick in the distal part. The diachronous stratigraphic position and distinct coarser sediments than those of the underlying and overlying successions suggest a large-scale slope failure of the fine-grained foreset (more than 2 km3). The occurrence of exotic granitic boulders, originating from the basement rock, more than 1 km west of the present fan-apex, is indicative of extreme sea-level run-up. The dispersal pattern and paleocurrent direction suggest that the HCM flowed to the northeast, irrespective of the local depositional slope which show a radial distribution from the fan-apex. The distribution pattern almost perpendicular to the strike of the NW-SE trending transfer fault suggests that the HCM was triggered by a reflection flow of giant tsunami wave, resulting in a large-scale failure of high-gradient (> 15° in slope angle) fandelta slope. [ABSTRACT FROM AUTHOR]

Enhanced sedimentation at glacial margins can produce submarine megaslides (>10,000 km3). We report a single megaslide in the Surveyor Fan, Gulf of Alaska. Minimum extant size is ∼16,124 km2 in area and ∼9,080 km3 in volume. Slope failure occurred ∼1.2 Ma at the onset of the mid‐Pleistocene transition (MPT). With accretion along the Aleutian‐Alaska Trench, the original volume is conservatively ∼16,280 km3, with only a 140 km run‐out due to its blocky, high shear strength nature. We suggest the megaslide was triggered by a major sediment influx at the onset of the MPT, when glacial‐interglacial cycles shifted from 41 to 100 Kyr. The absence of repeat megaslides may reflect a changing balance between seismic strengthening and sediment flux, where later sedimentation driven by cross‐shelf ice streams results in thin, fluidized, non‐cohesive slides. Continued accretion of the Surveyor Fan and megaslide also reduces critical wedge taper, further inhibiting major failure. Plain Language Summary: Sediment flux at glacial margins can produce submarine slides >10,000 km3 in size (megaslides). We report a single megaslide in the Surveyor Fan, Gulf of Alaska. Minimum extant size is ∼16,124 km2 in area and ∼9,080 km3 in volume. Failure occurred ∼1.2 Ma at the onset of the mid‐Pleistocene transition (MPT). Due to accretion along the Aleutian‐Alaska Trench, the original volume is conservatively ∼16,280 km3, but with only a 140 km run‐out due to its blocky, high shear strength nature. We suggest the megaslide was caused by the initial major sediment flux at the onset of the MPT, and that afterward only fluidized, thin, and non‐cohesive slides occurred. This is due to changing balance between seismic strengthening and sediment flux, and accretion of the Surveyor Fan and megaslide which reduces the critical wedge taper inhibiting major failure. Key Points: World's Fifth largest mapped megaslide documented beneath Surveyor Fan Gulf of AlaskaTiming of slope failure linked to onset of mid‐Pleistocene glacial intensificationAbsence of later failures due to changing balance of sediment flux/seismic strengthening and negative feedbacks from critical wedge processes [ABSTRACT FROM AUTHOR]

Alluvial fans are rapidly evolving landforms sensitive to changes in tectonic and climatic conditions. Their study provides useful information to unravel the landscape evolution of lowlands and mountainous regions where sediment transported by rivers originates. The chronology of alluvial fan deposits is crucial for the flood risk assessment of those populations settled on this type of dynamic landform. Here we provide (1) a review of the literature concerning climatic reconstructions for the Sierra de Gredos, (2) optically stimulated luminescence (OSL) ages and (3) topographical analysis to reconstruct the recent events that built-up the alluvial fans of the southern sector of Sierra de Gredos (Central Spain). The area is tectonically active and has a relatively simple lithology given by a deformed and fractured Paleozoic granite massif that was heavily eroded by Quaternary glacial advances. Our OSL results indicate that the recent build-up events span from ca. 5 ka up to the end of the 19th century. The chronology of events is consistent with the climatic change reported for Central Spain, where humidity seems to be a primary control in the recent activity of the alluvial fans. Additionally, topographic analysis on a 5-m-resolution LIDAR DEM help us to propose that, tectonics have been a major control of Gredos alluvial fans in a long-term scale, longer than the Holocene but, since the mid-Holocene to the present, climate is a primary control on their landscape evolution. We conclude that current climatic conditions favor fan degradation for the Gredos alluvial fans rather than sediment transport and fan aggradation. The present study emphasizes the necessity of supplementing OSL chronologies with other long-term geochronological techniques to confine the constructive periods of fans for the entire Holocene. [ABSTRACT FROM AUTHOR]

The diagenetic evolution of sandstone is very complicated under the conditions of high temperatures and pressures in deep-water, deep-buried regimes, which have great influence on reservoir quality. This study investigates the typical reservoir target of Neogene deep-water, submarine-fan sandstones under high-temperature, high-pressure regimes in the Qiongdongnan Basin, South China Sea. Utilizing a thin section, scanning electron microscope (SEM), mineral geochemistry combined with burial history evolution, complex diagenetic events, and main controlling factors of the sandstone in the Neogene Meishan Formation were determined. The results show that the evolution of sandstone reservoirs is initially controlled by depositional framework compositions and subsequently modified by eogenetic and mesogenetic alterations during progressive burial. Eogenetic alterations mainly include the following: (1) mechanical compaction; (2) dissolution of feldspar; (3) low-Fe calcite cementation. Mesogenetic events were identified as the following: (1) dissolution of feldspar; (2) ferroan calcite and ankerite formation; (3) precipitation of quartz and clay mineral. Mechanical compaction is greatly influenced by the original depositional framework composition, and sandstone samples enriched in high contents of detrital clay matrix always experienced extensive mechanical compaction. Different phases of carbonate cement during different diagenetic regimes lead to continuous destruction on reservoir porosity. The dissolution of unstable feldspar minerals during eogenetic and mesogenetic environments leads to the development of secondary porosities and would enhance the quality of the reservoir. Overpressure formation is pervasively developed owing to early disequilibrium compaction and subsequent natural gas charging. Only well-sorted sandstones with low contents of detrital clay matrix could resist early mechanical compaction, lead to ample residual original porosities, and then undergo extensive mineral dissolution to generate sufficient secondary porosities. Subsequently, these porosities would be effectively protected by overpressure formation. Poor-sorted sandstones with high contents of detrital clay matrix would experience strong mechanical compaction and extensive destruction of original porosities. Thus, these sandstones are difficult to have significant dissolution and are unable to be effectively protected by overpressure formation. Therefore, the interplay between the original framework composition and the corresponding diagenetic pathways coupled with overpressure formation would result in strong reservoir heterogeneity for the deep-buried sandstones during progressive burial. [ABSTRACT FROM AUTHOR]

The turbiditic succession containing exotic blocks of various sizes deposited in the Çüngüş Basin, has been previously identified as the Çüngüş Formation in front of the Southeast Anatolian Suture Belt, Türkiye. These turbiditic sediments, dated as Eocene-Early Miocene, were interpreted as the lowermost allochthonous tectono-stratigraphic unit thrust over the Lice Formation during the Miocene within the Çüngüş-Hakkari nappes. In this study, the stratigraphical, sedimentological, palaeontological, and structural features of the Çüngüş and Lice formations are examined and reinterpreted within a basin model. Both formations consist of sandstones, siltstones, mudstones, and subordinate conglomerates, indicating ramp-fringe palaeochannel, submarine fan, and basin-floor turbidite facies associations. In the northern part of the basin, just in front of the suture belt, volcanic, metamorphic, and ophiolitic rocks and nummulitic limestones are included as blocks and tectonic slices within the turbidite succession. Based on nannoplankton analysis, both Çüngüş and Lice formations are assigned an Early Miocene age. The sedimentary facies associations filling the Çüngüş Basin are transitional from proximal to distal facies. The thrust in the previous maps separating the Çüngüş and Lice formations cannot be confirmed in the field. Based on our field observations and age data, we interpret that the Lice and the Çüngüş formations deposited continuously within the Çüngüş Basin that was opened as a foreland basin by flexural subsidence of the Arabian Autochthon under the crustal load of the Pütürge-Bitlis Massifs and the Maden Complex during the Early Miocene. The turbidite deposits containing exotic blocks in the north of the basin are interpreted as wedge-top deposits of the foreland basin, while those in the south are considered foredeep deposits. [ABSTRACT FROM AUTHOR]

Distinguishing between shallow‐water delta and fluvial fan deposits in the subsurface of lacustrine basins is challenging due to their similar depositional characteristics and distribution patterns. This study focuses on the Middle Jurassic Shaximiao Formation in the central Sichuan Basin using core observations, seismic analyses, petrology analyses, zircon analyses, palaeoclimate indicators and palaeocurrent analyses to address this issue. Fifteen sedimentary lithofacies and eight lithofacies associations were established, corresponding to channelized fluvial deposits, non‐channelized fluvial deposits and shallow‐water delta deposits. Shallow‐water deltas are dominated by channels and mouth‐bar complexes with grey, red and green interbedded mudstone. Shingled seismic reflection, green mud clasts, small burrows and wave ripples are common with occasional palaeosols. Fluvial fans are dominated by channels and crevasse‐splays with pink colour and accompanied by red coloured floodplain deposits. Bright spot seismic reflection, red mud clasts, big burrows, current ripples and palaeosols are common. The increased uplift of the Dabashan Mountains controls the palaeocurrent direction, promoting the evolution from a shallow‐water delta in relatively humid environments to a fluvial fan in relatively arid environments. The channel widths in shallow‐water deltas are wider than those in fluvial fans, whereas the opposite applies for the channel amalgamation rate. Highly frequent channel‐width variations are controlled by short‐cycle climate fluctuation, corresponding to chemical index of alteration value fluctuations in different sandstone groups. The channel width in the relatively humid environments is wider than that in arid environments for both shallow‐water deltas and fluvial fans. It is likely that the sedimentary evolution from shallow‐water deltas to fluvial fans is relatively common in lacustrine basins in relatively arid environments with wide and gentle slope landforms. [ABSTRACT FROM AUTHOR]

Tectonics play a significant role in shaping the morphology of submarine canyons, which form essential links in source-to-sink (S2S) systems. It is difficult, however, to investigate the resulting morphodynamics over the long term. For this purpose, we propose a novel experimental approach that can generate submarine canyons and hanging-wall fans on continuously evolving active faults. We utilize morphometric analysis and morphodynamic models to understand the response of these systems to fault slip rate (Vr) and inflow discharge (Q). Our research reveals several key findings. Firstly, the fault slip rate controls the merging speed of submarine canyons and hanging-wall fans, which in turn affects their quantity and spacing. Additionally, the long profile shapes of submarine canyons and hanging-wall fans can be decoupled into a gravity-dominated breaching process and an underflow-dominated diffusion process, which can be described using a constant-slope relationship and a morphodynamic diffusion model, respectively. Furthermore, both experimental and simulated submarine canyon–hanging-wall fan long profiles exhibit strong self-similarity, indicating that the long profiles are scale independent. The Hack's scaling relationship established through morphometric analyses serves as an important link between different scales in S2S systems, bridging laboratory-scale data to field-scale data and submarine-to-terrestrial relationships. Lastly, for deep-water sedimentary systems, we propose an empirical formula to estimate fan volume using canyon length, and the data from 26 worldwide S2S systems utilized for comparison show a strong agreement. Our geomorphic experiments provide a novel perspective for better understanding of the influence of tectonics on deep-water sedimentary processes. The scaling relationships and empirical formulas we have established aim to assist in estimating volume information that is difficult to obtain during long-term landscape evolution processes. [ABSTRACT FROM AUTHOR]

The multicoloured 'Košna' conglomerates are investigated in the area of the Košna Voda spring, in the Brušane area of Velebit Mt., Croatia. The studied conglomerates consist of red-coloured matrix and clasts of various lithologies (sandstones, limestones, chert and quartz pebbles) and sizes, suggesting provenance from different areas. Average clast size and their percentage was determined by the Udden-Wentworth classification with estimation of the matrix content. Clasts and matrix lithological and mineralogical characteristics were determined using petrographic, ore microscopy, and X-ray diffraction analysis. Sandstone clasts in the studied conglomerates are classified as lithic arenites, subarkoses and arkoses. Limestone clasts are mostly wackestones to packstones with foraminifera, ostracods, echinoid and bryozoan fragments that derive from late Carboniferous/early Permian shallow-marine limestones. Calcispheres and incipient growth forms of Microcodium are also present, suggesting different sediment sources and resedimentation processes. Fragments of fusulinid foraminifera were identified in the matrix of the 'Košna' conglomerates. Based on the analyses performed, and field observations, the 'Košna' conglomerates are described as early Permian (Cisuralian) polymictic clast-supported to matrix-supported conglomerates and breccia-conglomerates that share structural and textural similarities with conglomerates from other areas in the Dinarides, as well as in the Eastern and Southern Alps. The 'Košna' conglomerates are younger than the Sakmarian and are comparable with the Trogkofel limestones of the Carnic Alps and the Karavanke Mts. in Slovenia. We suggest that the studied deposits originated from the uplifted Variscan Mountains during the Variscan and Saalian orogenic movements, and were finally deposited from tractive flows and occasional debris flows in a shallow marine environment of the Palaeo-Tethys, possibly in fan deltas. [ABSTRACT FROM AUTHOR]

A year-round monitoring of Particulate Matter (PM) less than 2.5 μm in aerodynamic diameter (PM 2.5) and Total Suspended Particulate (TSP) from a conventional cage laying hen house was conducted to reveal their spatiotemporal variations of concentrations downwind of tunnel fans. The PM Emission Rate (ER) and the correlations between PM with meteorological parameters and ventilation rate were studied. Ten self-developed Particle Concentration Monitoring Units were distributed to multiple horizontal (2, 25, and 50 m) and vertical (2 and 5 m) locations for PM examination. Four PM 2.5 concentration categories were classified: good (0–35 μg m−3), moderate (35–75 μg m−3), unhealthy (75–150 μg m−3), and very unhealthy (150–350 μg m−3). Annual and monthly percentages of PM 2.5 and TSP sampling hours for each category were calculated. Significant temporal variations in ER were observed, with monthly average ER ranging from 0.05 to 0.86 mg d−1 hen−1 for PM 2.5 and 1.40–8.90 mg d−1 hen−1 for TSP. Approximately 10–40% of PM 2.5 sampling hours exceeded 75 μg m−3, while no TSP concentration was higher than the recommended threshold. The monthly percentage for the "very unhealthy" PM 2.5 category was higher in winter, whereas the highest monthly percentage for the 800–1,200 μg m−3 TSP category was found in summer. Higher PM 2.5 concentrations were prone to be observed at further sampling points, while higher TSP concentrations were mostly detected near the fans or on both sides of the sampling area. PM 2.5 and TSP were positively correlated with ambient temperature and ventilation rate, while negatively correlated with relative humidity. • The emission rate of particulate matter in laying hen house had seasonal variations. • PM 2.5 concentrations at further locations downwind of fans were prone to be higher. • TSP concentrations near the fans were prone to be higher. • Hazardous PM 2.5 concentrations were more frequently observed in winter. • PM 2.5 and TSP were correlated with meteorological parameters and ventilation rate. [ABSTRACT FROM AUTHOR]

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran. The Qom platform developed in a back‐arc basin during the Oligo–Miocene due to the closing of the Tethyan Seaway. This formation consists of a variety of carbonate and non‐carbonate facies deposited on a platform ranging from supratidal to basin. A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area. Six third‐order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo–Miocene succession. According to all results and data, this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic‐carbonate composition, including the Bouma sequence. Then, from the late Chattian to the Aquitanian, the platform changed into a homoclinal carbonate ramp with a gentle profile. With respect to tectonic activity, this phase was a calm period during the deposition of the Qom Formation. Finally, a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian, terminated by the continental deposits of the Upper Red Formation. Regarding all geological characteristics, three main tectono‐eustatic evolutionary phases have been recognized in the Qom back‐arc basin. [ABSTRACT FROM AUTHOR]

This study is based on the detailed sedimentological analysis of eleven sections and one well through the late Eocene–Oligocene flysch formation of the Internal Ionian Zone (IIZ) in Western Greece. The sections are spread from the northern parts of Epirus to the north and Aitolokarnania to the south. Sedimentological data combined with biostratigraphic analyses resulted in a five-stage evolutionary model for the basin. Unit I corresponds to the lower part of the examined sections, indicating the onset of clastic sedimentation. Regarding depositional environments, it is regarded as a basin plain where lobe distal fringe accumulations occur. Unit II consists almost exclusively of heterolithic facies, marking the advance of a lobe complex system. Massive sandstone facies dominate unit III and can be considered a more proximal submarine fan system. Unit IV reflects a calm period of the basin, where mud-dominated heterolithics and hemipelagic mudstones were deposited. Hemipelagic mudstone facies with intervals of heterolithics, conglomerates, and deformed and massive sandstone facies characterize unit V. The architecture resembles a slope system incised by canyons and channels. The sand-rich intervals in Units III and V could act as the most favorable reservoir levels. In contrast, the sand-rich intervals in Unit II are considered less promising due to their higher heterogeneity. [ABSTRACT FROM AUTHOR]

Continental margins that exhibit high terrigenous input are generally located near deltas that are capable of transporting large quantities of sediments into the basin. However, in rare cases, high terrigenous sedimentation occurs in regions deprived of major riverine systems where the sedimentary pathway is enigmatic. One such case is the Neogene of the Pelotas Basin of Brazil and Uruguay, adjacent to the La Plata River mouth. Since the Miocene, anomalous sedimentation formed a giant progradational wedge, the Rio Grande Cone, one of the largest submarine fan-like features on Earth. To understand the Neogene evolution of the margin and the origins of the Rio Grande Cone, here we present a seismic-stratigraphic framework based on well-logs and 2D seismic data. Three depositional environments are identified: (1) on the shelf, upper Miocene to Pliocene fluvial channels delivered sand deposits on the mud-dominated shelf; (2) on the slope, sediment instability resulted in structural deformation and multiple phases of mass transport deposition and (3) on the lower slope and basin floor, large contourite drifts formed by sediment reworking. We classify the Rio Grande Cone as a megaslide complex, due to its depositional and structural setting. Local deltaic systems were active on the shelf in the Neogene, but the limited size of their paleo-drainage systems in comparison to the volume of sedimentation in the margin suggests that an additional sedimentary pathway existed. In this sense, the demise of an epicontinental sea over the La Plata Basin during the Neogene likely enabled the input of large volumes of fine sediments into the margin, via the La Plata plume water. We suggest that the desiccation of this epicontinental sea and the intensification of ocean currents since the middle Miocene explains the anomalous Neogene terrigenous influx into the SW Atlantic margin. [ABSTRACT FROM AUTHOR]

The Late Miocene source terrane tectonic history in the southern Gulf of Mexico Basin, as informed by detrital zircon geothermochronology data, supports a detailed regional palaeogeographic reconstruction from palaeoshoreline to the deepwater Zama minibasin of the Sureste salt basin. Seismic mapping points to a trio of pathways that converge upon two entry points into the Zama minibasin, illuminating how sediment gravity flows transit a complex seascape defined by shallow salt bodies. Consideration of empirical scaling relationships within and between segments of this sediment dispersal system allows for testable predictions of Upper Miocene submarine fan-runout lengths over basin exploration areas. Distances from the reconstructed shelf-margin to the Zama wells vary around 100 km, an increase of 20% over a straight-line distance as flows likely navigated around extant salt stocks, walls and sheets. This 100-km fan length is about 40% of the reconstructed minimum palaeo-river length, within predicted ranges for smaller source-to-sink systems in tectonically active areas (25 to 50%). The estimated fan-runout distance can be extended even further basinwards, considering the contemporaneous passage of the mobile Chortis block along the Tonala shear zone, expanding the Palaeo-Rio Grijalva drainage network during the Tortonian. These Late Miocene deepwater systems linked to the Palaeo-Rio Grijalva differ substantially from onshore Mexico-sourced turbidity flows feeding into the axis of the north-trending Veracruz Trough. Textural data from wells here suggests these systems were less effective at larger grain transport and sorting. Local (intrabasinal) variations are also evident within the Zama minibasin, as well data (image logs and cores) indicate that axially oriented sediment gravity flows involved fewer high-density turbidities, depositing lower net-to-gross sandstones and thicker shales than those flowing transverse to the basin axis from a southeastern basin entry point. These interpretations will guide both local exploitation of these economic resources and could also support future exploration for analogous salt-influenced deepwater reservoir systems in the Sureste basin and globally. [ABSTRACT FROM AUTHOR]

The submarine fan with a narrow shelf is usually reactive to environmental signal propagation; however, source-to-sink functioning can be further complicated by several allogenic forcings. Here, we document the high-frequency provenance variations and different sediment delivery models recorded in the late Triassic Zhuoni fan developed in the northeastern Paleo-Tethys Ocean, mainly based on process-based sedimentological and provenance study of the Panyuan section in the West Qinling area in the northeastern margin of Tibetan Plateau. High-, low-density turbidites, hybrid event beds and hyperpycnites are distributed in the lobe-dominated submarine fan succession. Field sedimentological evidence from surrounding outcrops suggests that shelf-edge failure was the main cause of most high-and low-density turbidites with the overall absence of submarine slides or slumps, whereas the narrow shelf configuration together with late Triassic humid pulses is favourable for the occurrence of flood-related hyperpycnites in the Zhuoni fan. Detrital zircon grains (N = 6; n=123-272) generally have Palaeozoic-Mesozoic ages (ca. 350-250 Ma and 500-400 Ma) and Neoarchean-Paleoproterozoic ages (ca. 2100-1750 Ma and 2600-2400 Ma), but they can be further categized into three age groups due to different proportions of Precambrian age populations. The results demonstrate that the potential source areas may include the South and North Qinling Orogenic Belt, Qilian Orogenic Belt, different segments of North China Craton and the tectonic junction area between the Qinling and Qilian Orogenic Belts. The temporal changes in provenance signals, which are reflected by both the detrital zircon age spectra and heavy mineral assemblages, indicate different contributions of those sources in response to sea-level fluctuation. It could thus give rise to temporal variations between reactive and buffered source-to-sink sediment delivery models of the Zhuoni fan, despite the overall narrow shelf configuration. The development of the lowstand Zhuoni fan was directly related to extrabasinal hyperpycnal delivery from the river mouth and its high-frequency provenance variability recorded different efficiencies of signal transfer through the onshore catchment with significantly influence of temporal storage, fluvial rejuvenation or even regional climate variability. The highstand submarine fan was thought to be formed by shelf-edge failure with sediment buffering in the shelf region, which was associated with a strong magnitude of provenance mixing. Our work provides a new perspective for deciphering the different origins of deep-water sediment delivery in response to high-frequency sea-level and climate changes. [ABSTRACT FROM AUTHOR]

Marginal and deeper marine facies typify the Miocene exposures along the western margin of the Gulf of Suez rift basin. The stratigraphic setting of these facies is a subject of debate and confusing at best. Integrative sedimentological and sequence stratigraphic study of successions exposed in the St. Paul and El-Zeit blocks provides insight into the lateral relationships between the two facies and their evolution, a topic that is not fully understood. The St. Paul block, located at the basin margin, has thin shallow marine facies, while the succession of El-Zeit block, situated near the basin axis, consists of basal conglomerates, thin shallow marine carbonates, thick deeper marine shale and marginal evaporites. The facies architecture of these successions is interpreted as belonging to two different depositional models: a fan-delta/lagoon system followed upwards by an alluvial fans/sabkha-tidal flat system in the St. Paul hangingwall basin, and carbonate-siliciclastic-evaporite systems on the hangingwall dip-slope ramp of El-Zeit block. These models may help understanding the sedimentary history of other similar blocks in the rift basin. The studied facies show many striking features such as deposition during tilting of fault block, abrupt facies and thickness variations, coarse clastic shedding, erosion channel filling, onlapping of high standing blocks and evaporite accumulation. These features are the result of major tectonic events that triggered the formation of unconformities at different hierarchical levels during the late early to middle Miocene. These unconformities subdivide the Miocene facies into five depositional sequences separated by basin-wide erosional boundaries. This division greatly improves the age control of marginal marine facies. It affords new insight into the evolution of marginal marine facies along the western margin of the basin in relation to deeper facies in the basin centre. Facies and thickness changes in these tectonically induced sequences indicate that basin floor irregularities, subsidence rates, climatic changes, variable sediment influx, sea-level/brine-level changes and basin isolation/connection to the Mediterranean Sea are also important factors responsible for their evolution. [ABSTRACT FROM AUTHOR]

The influence of bottom currents on submarine channels has been widely recognized, for instance, by the formation of asymmetric channel-levee systems and drifts. In contrast, it is often considered that submarine lobes can be only reworked by strong bottom currents and are not affected by bottom currents during their deposition. In this study, we analyse the potential effect of bottom currents on different hierarchical lobe architectures that formed during the lower Oligocene in the Rovuma Basin offshore East Africa. We characterize the stacking patterns, morphology and connectivity of different hierarchy lobes using well data and three-dimensional seismic data. We found no direct influence of bottom currents on the lobe complexes and single lobes that show a unidirectional stacking pattern that is opposite to the direction of bottom currents. Lobe elements in single lobes display vertical accretion with no obvious relationship with bottom currents. Additionally, the first deposited single lobe morphology presents an asymmetric shape, with a thicker lobe margin on the downstream side of the bottom currents, but this is due to an initial low topography on the downstream side rather than bottom currents. The architectural distribution reflects that the topography present before the depositions of the submarine lobes was controlled by previous asymmetrical channel-levee systems formed by the synchronous interaction of bottom currents and gravity flows. This asymmetric topography controls the subsequent deposition of lobes and results in the migration of single lobes in the upstream direction of bottom currents. Although weak to moderate bottom currents may not be able to substantially rework submarine lobes, our results demonstrate that they may control the geometry and evolution of submarine channels and thus indirectly affect the thickness and migration of lobes in more environments than previously thought. [ABSTRACT FROM AUTHOR]

This study provides a sedimentological, stratigraphic and palaeocurrent investigation of Upper Eocene to Lower Oligocene deep-sea fan deposits found in the central part of the Pindos foreland basin in western Greece. According to facies analysis, the examined succession at Amfilochia area has 13 sedimentary facies and 10 facies and sub-facies associations. Depositional elements include abyssal plain pelagics, outer fan, inner fan, and slope deposits. Outer fan sediments are classified as lobe-axis, lobe-off-axis, lobe-fringe, and distant lobe-fringe deposits, while inner fan sediments are classified as channel-fill, crevasse-splay, internal and external levee deposits. The stratigraphic study shows an upward shift from abyssal plain pelagics to outer, inner fan, and finally slope deposits, implying submarine fan system progradation and progressive infilling of a deep-water sediment depocentre. The sediments were deposited in the foredeep of the Pindos foreland system and correspond to the system's underfilled stage, when sedimentation was unable to exceed the accommodation provided by lithospheric flexure. They point to deposition near the onset of the Pindos orogen, after the closure of the Pindos basin because of the collision of the Apulian with the Pelagonian microplate during the Cretaceous-Palaeogene period. Palaeocurrent data from sole marks show bipolar directions associated with two distinct spreading sub-marine fan deposits. As a result, the study region was split into Upper (major SE-direction flow) and Lower (major NW-direction flow) parts, indicating that axial flows were predominant during sediment deposition. However, as the deposition of the elements continued, the progradation of both systems constrained the space accommodation because of the increased basin sediment supply and forced an increase in the degree of basin confinement that changed the compensational to aggradational stacking pattern. The goals of this research are to develop an updated facies model for these deep-sea fans as well as a robust correlation framework for the various stratigraphic units in the central Pindos foreland basin. This research also connects the stratigraphic development of deep-sea fan deposits to the evolutionary phases of the Pindos foreland system, providing fresh insights into the palaeogeographic circumstances in the Pindos foreland basin. [ABSTRACT FROM AUTHOR]

The deposits of the upper Neoproterozoic Zerrissene Group of central‐western Namibia represent a large siliciclastic deep‐water depositional system that showcases the intricacies of facies and architectural relationships from bed‐scale to fan‐system‐scale. The lack of vegetation in the Namib Desert and regular east–west repetition of folded stratigraphy (reflecting ca 50% tectonic shortening) provides quasi‐three‐dimensional exposure over a current area of approximately 2700 square kilometres. The Brak River Formation, the middle sand‐rich unit of the Zerrissene Group, consists of nearly 600 m of strata exposed in multiple parallel continuous outcrops up to ca 10 km in length and oriented obliquely to depositional dip. Ten stratigraphic sections are correlated ca 32 km (ca 64 km restored) across the basin and offer exposure comparable in scale to modern submarine fans. Six sedimentary facies are identified and grouped into four facies associations that represent axial‐to‐marginal portions of deep‐water lobes in an unconfined submarine fan system. Spatial facies patterns, regional thickness variations, and palaeocurrents indicate that Brak River Formation sediments were transported primarily from the north to south–south‐west through a trough‐like basin, and deposited within an unconfined basin plain at the junction of the Adamastor and Khomas oceans. The unique outcrop exposure and extent permits the documentation of system‐scale architecture and basin configuration of the Brak River submarine fan system. A transition from the sand‐rich lower Brak River Formation to more intercalated mudstone‐dominated intervals in the middle and upper Brak River Formation is interpreted to record a change from aggradational to compensational stacking of lobe deposits. This records the evolution of a large submarine fan as it filled the subtle seafloor topography and became less confined at the system‐scale. The documentation of these deep‐water deposits from centimetre‐scale to basin‐scale provides a new model for a system with extensive long‐distance transport of sand‐rich sediment gravity flows to submarine lobes without apparent channelization. [ABSTRACT FROM AUTHOR]

The Tertiary-age deep-marine succession cropping out between Tarifa and Algeciras can be subdivided into two units, namely the Late Eocene-?Early Oligocene Getares Unit and the overlying Oligocene-?Early Miocene Algeciras Formation. These strata comprise six sedimentary facies, ranging from thick-bedded sandstones to mudstones. The depositional settings are variable, comprising sandstone/calcarenite packages with intercalated mudstones and marls. The lowermost coarse-grained package is the Getares Unit (fan-fringe setting). This is overlain by the thick-bedded sandstones of the Algeciras Fm (channel, channel-margin setting) which pass upwards into more laterally-extensive beds (sheet-like lobe). Sediments were derived from a coastal setting to the north, as evidenced by occasionally abundant plant remains, from direct fluvial input (hyperpycnal flow). Within this succession, 34 ichnogenera (48 ichnospecies) have been recorded, including, Belorhaphe, Capodistria, Chondrites, Circulichnis, Cochlichnus, Cosmorhaphe, Desmograpton, Gordia, Halopoa, ?Helicorhaphe, Helminthopsis, Helminthorhaphe, Imponoglyphus, Lorenzinia, Megagrapton, Oldhamia, Ophiomorpha, Palaeophycus, Paleodictyon, ?Phycodes, Phycosiphon, Planolites, Protopaleodictyon, Protovirgularia, Scolicia, Skolithos, Spirophycus, Spirophyton, Spirohaphe, Taenidium, Teichichnus, Thalassinoides Urohelminthoida and Zoophycos. Of the ichnofossil assemblages that were defined, most are concentrated in the fan-fringe (Getares Unit; 74%) and channel/channel-margin (lowermost Algeciras Fm; 41%) settings, with a marked reduction in the sheet lobe system (uppermost Algeciras Fm; 9%). The ichnofaunal assemblage from the Tarifa-Almeria section represents the Nereites ichnofacies, or more specifically, the Paleodictyon and Nereites subichnofacies, both typified by abundant graphoglyptids. Deposition in the Algeciras-Tarifa region commenced with the mudstones underlying the Getares Unit followed by a sandstone package (fan fringe; Punta de Getares), indicative of fan progradation. Subsequent mudstones suggest a phase of quiescence before the deposition of the thick, sandy hyperpycnites in the lower part of the Algeciras Fm (Punta del Carnero I & II) where deposition was probably related to flooding events in the source rivers to the N. These were subsequently overlain by the Tarifa area lobe sediments. Deposition of the succession coincided with the transition from a Greenhouse to an Icehouse climatic regime (Eocene-Oligocene) and this change may be reflected in the marked reduction in ichnofaunas moving from the lower (Punta del Carnero) to the upper (Tarifa) Algeciras Fm. [ABSTRACT FROM AUTHOR]

Submarine levéed channels are often observed in submarine fans, although submarine fans without continuous levéed channels are also common depending on the composition of supplied sediments, particularly the proportion of muddy/sandy materials. However, parameters governing the inception of levéed channels have not yet been studied. Furthermore, depositional levéed channel topography has not been simulated in experimental flumes in any previous study conducted with dilute flows (flow concentration <10%). Herein, four experimental series were conducted (Series A, B, C and D) to simulate depositional submarine channels and to study their formative conditions. A mixture of sediment and saline water was used in the experiments, and both the width of an outlet diffuser and flow discharge rate were varied in the experimental series. A topography composed of a channel with two ridges resembling natural depositional submarine channels with levées was formed in all experiments. Comparisons between the experimental topographies and natural submarine fans revealed that two of the four experimental series produced channel levées with length to width ratios similar to those produced by natural systems. An experiment with half the outlet size produced a channel two times deeper (4.5 cm against 2.0 cm and 2.2 cm) as compared to other experiments. The flow discharge rate and outlet width were half of those observed in Series A and B. Furthermore, salt was removed from the initial mixture for one of the experiments, resulting in high natural levées with a short channel. This study demonstrated that dilute flows could form purely depositional channel levées without precursor or resultant erosive features. In addition, results revealed that the formation of submarine channels is related to two factors: channel width and muddy suspended sediment. [ABSTRACT FROM AUTHOR]

Flood‐generated hyperpycnal flows are dense, sediment‐laden, turbulent flows that can form long‐lived, bottom‐hugging turbidity currents, which undoubtedly transport large volumes of fine‐grained sediments into the ocean. However, their ability in transferring sand into deep‐water basins is debated. This study presents sedimentological evidence of sandy hyperpycnal flow deposits (hyperpycnites) in a series of basin floor lobe complexes associated with a progradational shelf margin in the Eocene of Spitsbergen, Arctic Norway. Four coexisting types of sediment gravity flow deposits are recognized: (i) sandy hyperpycnites deposited by quasi‐steady hyperpycnal flows; (ii) turbidites deposited by waning, surge‐type turbidity currents; (iii) hybrid event beds deposited by transitional flows; and (iv) mass transport deposits emplaced during rare slope failures. The abundance of thick‐bedded massive sandstones, frequent bed amalgamation, the distribution of hyperpycnites across the lobes and the abundance and systematic occurrence of plant‐rich hybrid event beds and associated climbing ripple cross‐laminated beds in the lobe fringes, suggest that hyperpycnal flow was the most important mechanism driving lobe progradation. Shelf‐edge positioned fluvial channels linked to the basin floor lobe complexes via deeply incised, sandstone‐filled slope channels, suggest that rivers fed directly onto the slopes where their dense, sand‐laden discharges readily generated quasi‐steady hyperpycnal flows that regularly reached the basin floor. The composite architecture and complex waxing–waning flow facies configuration of the hyperpycnites is consistent with sustained and concomitant suspension and traction deposition under fluctuating subcritical to supercritical conditions. Similar sandstone beds occur on the clinoform slopes, indicating that the hyperpycnal flows operated likewise on the slope. Plant‐rich hybrid event beds indicate transformation of initially turbulent flows by relative enrichment of clay and plant material via progressive sand deposition to such an extent that it suppressed turbulence. The multi‐faceted character of the hyperpycnites reported here, challenges traditional beliefs that hyperpycnites assumingly preserve the waxing–waning signal of single‐peaked floods. [ABSTRACT FROM AUTHOR]

For the first time, this study presents interpretations of alluvial fans in spectral decomposition RGB Blends, analysed in seismic time slices from the Middle Triassic to Lower Jurassic stratigraphical interval of the Horda Platform (northern North Sea). The time slices record a shifting alluvial fan front, fluvial variability, uplift and erosion and reveals depositional elements that may set the common conception of the geological development of this area during the Early–Middle Mesozoic up for discussion. Results show that the Upper Triassic Lunde Formation in the eastern margin of the Horda Platform was characterized by the deposition of coalesced alluvial fans. A variable extent of the fan front through the Upper Triassic is linked to interplaying allogenic factors: uplifted source areas in the aftermath of Early–Middle Triassic rifting determined sediment availability; climate transitioning from arid to semi‐humid, with increasingly fluctuating precipitation, controlled sedimentation, and run‐off; provenance dictated bulk sedimentology and affected prevailing alluvial processes. An overall retreat of the fan system through the Late Triassic coincided with a significant change in landscape characteristics at the transition into the overlying Statfjord Group. Uplift and initial tilting of the Horda Platform caused landscape degradation and the formation of plateaus and incised valleys, contemporaneous with increased humidity and marine transgression, forming estuaries. The shift in depositional style has implications for reservoir properties, creating complexity and heterogeneity in terms of facies distribution and connectivity, which may benefit potential CO2 storage. Upper Triassic alluvial fan development in the Horda Platform (northern North Sea) depicted through spectral decomposition of seismic time slices Enhanced level of seismic stratigraphic interpretation with RGB blending Impact of allogenic factors on alluvial depositional development Implications of alluvial variability on reservoir properties [ABSTRACT FROM AUTHOR]

Excellent cliff exposures in the Khush‐Ab and Chenareh anticlines (Zagros Foreland Basin, SW Iran) offer a good opportunity to document stratal geometries, paleofacies heterogeneity, depositional architecture and depositional cycles of the Lower Eocene sedimentary basin system. These unique outcrops containing six logged sections have been studied across a large‐scale transect, covering ca. 10 km of continental (Kashkan Formation), carbonate‐dominated platforms (Taleh‐Zang Formation) and submarine fan to basin‐floor settings (Amiran and Pabdeh formations). Field observations of the bedding geometries revealed a set of NE–SW oriented carbonate ramp clinoforms (clinoformal units 1–4) with sigmoidal cross‐sectional shapes and an internal fore‐stepping architecture. Based on detailed facies analysis, six facies associations (FA) were identified (FA.I to FA.VI), which are interpreted to have been deposited laterally in the continental, proximal to distal and deep‐water settings of a distally steepened carbonate ramp. According to the stratal stacking pattern, bounding surface, facies architecture and internal makeup of carbonate clinoforms, four H‐F‐cycles (cycle I–IV) corresponding to a lower hierarchical rank (fourth‐order cycle) were recognized and nested within the regressive stacking pattern (HST) of a higher hierarchical rank (third‐order sequence). These H‐F‐cycles are arranged in three segments (bottomset, foreset and topset) of each clinoformal unit. Higher rank transgressive blocks (TST) discriminated each clinoformal unit by up‐deepening sets of the H‐F‐cycle V. In total, five third‐order depositional sequences were identified. The sequence, stratigraphic framework and internal makeup of this carbonate platform indicate that these carbonate sloping successions are the type of accretionary carbonate ramp clinoforms that display an ascending ramp‐slope break trajectory. Evolutionary episodes of biogenic communities, climatic change, local tectonic movements, physical processes (e.g. waves and storms) and water depth gradient are major forcing parameters that controlled the carbonate factory and depositional geometry of this Lower Eocene succession; however, carbonate‐producing organisms and eustatic sea‐level fluctuations played the first role, and local tectonic movements in response to tectonic activities of the Zagros Foreland Basin played the second role. As a result, Taleh‐Zang carbonate platforms are rich in diverse assemblages of LBFs without fragments of coral and red algae, which appear to be a consequence of a hothouse state that diminishes the global thermal gradient, weakens pycnoclines and thereby limits the turbulence. [ABSTRACT FROM AUTHOR]

We investigate the chlorine isotope disequilibrium between chlorides in pore fluids and chlorides in seawater and infer its consequences for chlorine isotope exchange between ocean sediment pore fluids and seawater. We illustrate our methodology with pore fluids from two IODP drilled to depths of ≈1000 m (U1456 and U1457) in the Indus River fan dominated by clay-detritus sediments of the western Himalayas. At these two sites, the concentrations of chloride and sodium ions do not show significant changes with depth and remain very close to those of seawater. As a function of depth, however, chlorides show a progressive decrease in 37Cl (downto −2.5 and −1.4 ‰ respectively), while Ca2+ increases and Mg2+ decreases, as commonly observed in clay-rich oceanic sediments. The rate of the δ37Cl decrease is correlated to the lithology and sedimentation rate. Examining the chlorine budget on these two sites, we conclude that: (1) Most of the chlorine (≥96% of the total Cl) is contained in the pore fluids as chlorides, while the chlorine stored in the other sinks (minerals or organochlorine) is generally very minor (representing <4% of the total Cl). (2) These other sinks are too small to sequester the lost 37Cl-enriched chlorine, which could compensate for the decreased δ37Cl of the chlorides observed in the pore fluids (assuming that the pore fluids originally had chlorides with the chlorine isotopic composition of seawater, δ37Cl = 0 ‰). (3) This lost 37Cl-enriched chlorine has been released from the sediment into the overlying seawater, with fluxes of about 20 mol of chloride per square metre per kiloyear. In order to evaluate the consequence of this unbalanced on a global scale, we extend this chlorine budget analysis to 22 other oceanic sites drilled by IODP in a variety of tectonic environments. It is estimated that worldwide oceanic sediment pore fluids contain 1 × 1020 mol of chloride with mean δ37Cl at −2.3 ± 0.1 ‰ and mean chlorinity at 0.290 ± 0.055 mol Cl- per kg of sediment. Most of the calculated values of the lost 37Cl-enriched chlorine flux are between 3.5 and 45.6 mol of chloride per square metre per kiloyear (mean value of 18.3 mol Cl.m−2.kyr−1), corresponding to a typical chloride exchange time between sediments and seawater of between 5.5 and 71 Myr with a mean value of 14 Myr. Importantly, in oceanic sediments, a relationship between the δ37Cl of the chlorides in their pore fluids and the nature of the detrital minerals (smectite, illite, kaolinite, carbonate, quartz, ...) may exists. This relationship should be modulated by the detrital input from the continents to the oceanic sediments and should therefore be a consequence of the climatic conditions on the continents (mainly rain, temperature). The δ37Cl of the seawater should vary according to these detrital inputs. The expected range of variation would be between −0.3 and +0.3 ‰. This is consistent with the range of δ37Cl in seawater predicted by the study of evaporites deposited since 2 Ga (Eggenkamp et al., 2019). [ABSTRACT FROM AUTHOR]

This investigation documents that the Rugged Terrain Unit, the Stimson formation, and the Greenheugh sandstone were deposited in a 1200 m-deep lake that formed after the emergence of Mt. Sharp in Gale crater, Mars, nearly 4 billion years ago. In fact, the Curiosity rover traversed on a surface that once was the bottom of this lake and systematically examined the strata that were deposited in its deepest waters on the crater floor to layers that formed along its shoreline on Mt. Sharp. This provided a rare opportunity to document the evolution of one aqueous episode from its inception to its desiccation and to determine the warming mechanism that caused it. Deep water lacustrine siltstones directly overlie conglomerates that were deposited by mega floods on the crater floor. This indicates that the inception phase of the lake was sudden and took place when flood waters poured into the crater. The lake expanded quickly and its shoreline moved up the slope of Mt. Sharp during the lake-level rise phase and deposited a layer of sandstone with large cross beds under the influence of powerful storm waves. The lake-level highstand phase was dominated by strong bottom currents that transported sediments downhill and deposited one of the most distinctive sedimentological features in Gale crater: a layer of sandstone with a 3 km-long field of meter-high subaqueous antidunes (the Washboard) on Mt. Sharp. Bottom current continued downhill and deposited sandstone and siltstone on the foothills of Mt. Sharp and on the crater floor, respectively. The lake-level fall phase caused major erosion of lacustrine strata that resulted in their patchy distribution on Mt. Sharp. Eroded sediments were then transported to deep waters by gravity flows and were re-deposited as conglomerate and sandstone in subaqueous channels and in debris flow fans. The desiccation phase took place in calm waters of the lake. The aqueous episode we investigated was vigorous but short-lived. Its characteristics as determined by our sedimentological study matches those predicted by an asteroid impact. This suggests that the heat generated by an impact transformed Mars into a warm, wet, and turbulent planet. It resulted in planet-wide torrential rain, giant floods on land, powerful storms in the atmosphere, and strong waves in lakes. The absence of age dates prevents the determination of how long the lake existed. Speculative rates of lake-level change suggest that the lake could have lasted for a period ranging from 16 to 240 Ky. [ABSTRACT FROM AUTHOR]

Geomorphological and sedimentological research carried out in the vicinity of Vilnius (SW Lithuania) aimed to determine the age and stages of development of gullies in relation to climatic conditions and human activity. Two gullies located on the northern slope of the Vilnia river valley were examined in detail. The sedimentological features of the sediments which form fans at the mouths of the gullies were analysed. Three main lithological units were distinguished. On the basis of radiocarbon datings, the beginning of gully erosion was determined to be in the Middle Ages. This process began with intensive settlement in this area. Further stages of a cutting which were distinguished include early modern times and the period from the seventeenth century to the present day. [ABSTRACT FROM AUTHOR]

Palustrine‐lacustrine carbonates of the well‐dated Xichagou section (ca. 43 to ca. 13 Ma) next to the active Altyn Tagh Fault (ATF) are investigated in terms of abundance, lithofacies, strontium, carbon and oxygen isotopes, to differentiate tectonic and climatic controls on the evolution of intermontane lakes in the Tibetan Plateau. Volumetrically dominant siliciclastic strata document five depositional stages: mid‐Eocene alluvial fan (onshore), late Eocene fan delta (nearshore), Oligocene semi‐deep lake (offshore), early Miocene braided fluvial delta (nearshore) and mid‐Miocene fluvial plain (onshore). Carbonates are most abundant in the middle three lacustrine stages and contain various lithofacies, including calcretes, microbialites, grainstones and marlstones. Oxygen isotopes show two positive excursions (−1.17‰ and −2.59‰) at the first nearshore and late offshore stages, indicating two relatively saline stages linked to the Eocene and late Oligocene global warming climates. Carbon isotopes show a positive excursion (from −4.0‰ to +2.9‰) at the middle semi‐deep lake stage and meanwhile strontium isotopes of carbonates show a large negative excursion (from 0.7120‰ to 0.7113‰), both in response to the early Oligocene global humid and cooling climate and resultant lake expansion at the Qaidam Basin. Except for this lake expansion event, the first‐order lake transgressing, shallowing and regressing evolution at the Xichagou section were not consistent with Cenozoic global climatic change trends. Instead, the two‐stage strike‐slip faulting of the ATF probably induced the northeastward and eastward migration of basin depocenter and resulted in the lake transgression‐regression at the Xichagou section. The widespread presence and relatively minor variation in oxygen isotopes (from −7.5‰ to −7.0‰) of early Miocene microbialites in the northern Tibetan Plateau suggest a warm climate and a low relief before ca. 15 Ma. [ABSTRACT FROM AUTHOR]

The most extensive coverage of surficial sediment samples collected to date on Egypt's Nile Delta coast and shelf is needed to better define sediment dispersal patterns across this setting's rapidly eroding margin. Changes in time are now induced by River Nile sediment cutoff by dams, sea level rise, marked shelf subsidence, and regional climate changes, which have altered the amounts and components of sediments; these require replacement, along with the implementation of more effective coastal protection measures. Multiple computer-generated offshore maps depict the distributions and proportions of sand, silt, and mud; the mean grain size and standard deviation (sorting); heavy mineral concentrations; and carbonate content. Heavy mineral lobes at the coast and offshore identify former Nile branch sites. Channel lobes extending seaward resulted from their progradational phase and from the delta's altered sedimentation from the early to late Holocene. The progressive deposition and erosion of these fossil fluvial lobes, and of two active Nile channels, selectively removed their quartz and less dense minerals, thus concentrating heavy minerals on the coast and inner shelf. The prolonged dispersal of original sediment effluence from relict and recent Nile tributaries induced variable depositional patterns on the present shelf. These coastal depocenters, along with extensive sand, silt, and mud from shelf sediments, were reworked further seaward and dispersed by bottom currents, thus masking most previous onshore-to-offshore transport patterns. The major surficial features document long-term responses to the diverse dispersal that influenced the shoreline to the outer shelf deposits from the Pleistocene to the present. [ABSTRACT FROM AUTHOR]

The strata in the Shita Mountain, Yunkai region, are predominantly composed of clastic rocks with intercalated limestones. However, the precise stratigraphic age remains uncertain due to the scarcity of fossils. Previously, conglomerate layers in this region were considered indicative of the Yunan Orogeny during the Cambrian–Ordovician transition. However, through the identification of 12 lithofacies types and 5 lithofacies combinations in the conglomerate layers of the Shita Mountain section, it has been confirmed that these layers represent a fan delta depositional environment characterized by debris flow, traction flow, torrent, and rock flow. Based on the presence of brachiopod fossils dating to the Early–Middle Ordovician, we propose a novel two-episode model for the Yunan Orogeny. The first episode corresponds to submarine fan deposition, while the second episode involves tectonic uplift and a short-term sedimentary hiatus. Further analysis of the detrital zircon provenance reveals a strong affinity among the Yunkai area, India, Antarctica, the Lhasa, the Himalayas, Southern Qiangtang, and Western Australia during the Early–Middle Ordovician transition under the Gondwana assemblage background. [ABSTRACT FROM AUTHOR]

The timing and character of the initial marine flooding of extensional basins has implications for their tectonic history. Yet, the recognition of such flooding is difficult along rift basin margins due to the dominance of coarse‐grained systems and the lack of marine fauna. This study conducts detailed facies and stratigraphic analysis of a Mio‐Pliocene alluvial fan and fan‐delta succession in the Fish Creek Vallecito Basin in southern California. Our goal is to characterize the marine flooding surface, determine the paleogeographic position of the shoreline and estimate the magnitude of relative base‐level rise that occurred during the marine incursion associated with the opening of the Gulf of California. Our results show that the flooding of the Elephant Trees alluvial fans is often marked by an abrupt lithologic and facies change from meter‐scale boulder‐rich subaerial debrites (proximal alluvial fan facies association) to centimetre‐scale granule‐rich subaqueous debrites, ripple‐laminated sandstones and mudstones (prodelta facies association). By delineating the zone of transition between the subaerial and subaqueous facies, we place the initial flooding paleo‐shoreline 4 km up the alluvial fan's paleo‐depositional slope. Considering alluvial fan slope gradients between 1° and 5°, this 4 km transgression would require an estimated 70–350 m of water depth during the initial marine incursion. Interfingering of fan‐delta deposits with subaqueous marine and planktonic‐rich evaporites suggests that the basin was below sea‐level after, and perhaps even before, the marine flooding. Subaerial subsea‐level basins exist in Death Valley and the Salton Trough today within similar extensional and transtentional tectonic regimes. This subaerial subsea‐level interpretation might explain the high magnitude and abrupt relative base‐level rise recorded by the facies transitions in the Fish Creek Vallecito Basin. These results suggest that the Fish Creek Vallecito Basin underwent significant extension during its early and nonmarine depositional phase, allowing it to reach subsea‐level elevations. The tectonic history of the Fish Creek Vallecito Basin maybe similar to other extensional basins where rapid subsidence allows the accumulation of nonmarine strata below sea‐level prior to the marine flooding, then restricted and deep marine strata immediately after flooding. [ABSTRACT FROM AUTHOR]

Hyperpycnal flow deposits, one of the most important deep‐water gravity‐flow deposits in lacustrine basins, have become the research focus in recent years. However, the sedimentary characteristics and depositional model of hyperpycnal flow deposits in lacustrine basins remain unclear due to the differences of depositional settings between lacustrine and marine environments. Hyperpycnal flow deposits observed in the middle of the third member of the Shahejie Formation (Es3z) in the Bonan Sag, Bohai Bay Basin, Eastern China, provide a rare case study to reveal the characteristics and depositional model in lacustrine basins. For the first time, detailed core analysis, high‐resolution 3D seismic data, petrology and grain size analysis were used to unravel the characteristics and depositional model of hyperpycnal flow deposits in this study. Twelve lithofacies, six bed types and four bedsets (corresponding to feeder channel, distributary channel, levee and lobe) were recognized from detailed facies analysis. Plant fragment, an important identification mark for hyperpycnal flow deposits, can be classified into three types: completely broken plant fragments, partially broken plant fragments and complete leaves. The proximal part of the deposit develops a small amount of scattered and completely broken plant fragments in massive or spaced stratified pebbly sandstone and massive sandstone due to strong erosion of sustained high‐density turbidity current. The medial part of the deposit is dominated by laminated partially broken plant fragments in planar laminated or rippled sandstone due to suspended settling of sustained high‐density turbidity current and quasi‐steady low‐density turbidity current. Layered partially broken plant fragments with some complete leaves are common in the upper part mud rich division of hybrid event bed and laminated siltstone in the distal part of the deposit. The distribution pattern of hyperpycnites is controlled comprehensively by palaeogeomorphy and sediment supply. Palaeogullies determine the provenance direction of hyperpycnal flow. The formation of synsedimentary faults and troughs control the transport routing patterns. Local micro‐palaeogeomorphy and depression areas further restrict the distribution of sand bodies. During the early stage of deposition with insufficient sediment supply, sediments are transported to the deep basin along confined faulted troughs forming elongated sandy bodies. During the late stage of deposition with sufficient sediment supply, sediments are transported to the deep basin without confinement accumulating fan‐shaped sandy bodies. This study offers insight for enhancing the recognition criteria of hyperpycnites, as well as their depositional model in lacustrine basins. [ABSTRACT FROM AUTHOR]

Cap carbonates overlying Marinoan (635 Ma) glacial deposits worldwide record extreme paleoceanographic changes that may have triggered the rise of macroscopic life. However, the lack of geochronological constraints on these successions hinders reconciling climate and environmental change. Their upper part is marked by anomalous aragonite precipitation associated with large transgression and oxygenation of the post‐glacial ocean. Neomorphism of these deposits to low‐Mg calcite often includes centimetre‐scale seafloor crystal fans. We used in‐situ U–Pb dating and C and Sr isotopic analyses in the Puga cap carbonate to estimate the nature and timing of the neomorphism process. An age of 623 ± 3 [9] Ma (δ13C ~ −6‰ and 87Sr/87Sr ~ 0.7071–0.7075) for a blocky calcite cement is consistent with solution‐reprecipitation within the fans during final filling and diagenetic stabilization of the cap carbonate fabric. This result improves previous cap carbonate direct dating, providing a rare Lower Ediacaran chronostratigraphic reference. [ABSTRACT FROM AUTHOR]

The article presents the stages of development of the alluvial fan of the Stryi River (tributary of the Dniester River), which is the largest alluvial cone in the foreland of the Eastern Carpathians. The alluvial fan has a diverse morphology and complex structure, and its formation is the result of the accumulation and erosion activity of several rivers. In order to reconstruct the evolution of the alluvial fan, geological cross-sections of the Stryi, Svicha and Dniester river valleys were made on the basis of archival drillings and field research. The stratigraphy of the alluvial fills is based mainly on morphological (morphostratigraphic) criteria and the correlation of terrace levels with those of adjacent areas. Fluvial sediments from the Late Glacial and Holocene were dated by the radiocarbon method, which allowed the determination of the age of fan dissection. The main factor controlling the course of accumulation and erosion on the alluvial fan was climate change. The accumulation of alluvial covers was preceded by phases of erosion, which generally fell at the end of the glacial periods (late glacial) and the beginning of the interglacials. Differences in the depth of dissection of the strath and the thickness of the accumulated alluvial sediments in the northern and southern parts of the fan may be the result of different tectonic movements and/or the transport capacity and size of river discharges. In the Late Glacial (Alleröd-Younger Dryas) and the Early Holocene the alluvial fan was dissected to a depth of 10-15 m due to the erosion of the Stryi and Dniester rivers. [ABSTRACT FROM AUTHOR]

Petrography of recrystallised ikaite from Ocean Drilling Program material has been presented previously from Nankai Trough and Congo (ex-Zaire) deep-sea fan. This paper expands on the Nankai Trough ikaite observations, drawing on evidence from Laptev Sea, South Georgia, Okhotsk Sea, and coastal lagoon Point Barrow. However, even though many ikaite and glendonite sites occur at high latitudes, it cannot be that ikaite forms exclusively in polar environments, as demonstrated by the occurrences in the low latitude low temperature deep sea sediments offshore Gulf of Guinea (Angola Congo) and mid-latitude deep-sea trenches offshore Japan. Recrystallised ikaite occurs as mm large, zoned calcite crystals in all samples, along with secondary phases of calcite. Our data set is unique in that the origin, storage, and recrystallisation process of natural formed ikaite is recorded in detail and confirms that glendonite petrographic characteristics are a consequence of the structure and chemistry of recrystallising ikaite and not the physical or geochemical environment. The transformation of man-made ikaite to calcite as recorded in laboratory studies, is a process very similar to the one we have observed for natural ikaite. Most significant is that there is variation in the order of the calcite types within a single sample, leading to the conclusion that the variation is a consequence of impurities and geochemical variability in the ikaite, not the external environment. Morphological observations reveal similarities in ikaite and glendonite, this and the similarity in internal textures in glendonite and recrystallised ikaite confirms that glendonite may be used as an indicator of past presence of ikaite. [ABSTRACT FROM AUTHOR]

Streams convey coarse-clastic sediments towards coasts, where interactions with deltaic and coastal processes determine their resultant sedimentology and geomorphology. Extracting hydroclimatic signals from such environments is a desired goal, and therefore studies commonly rely on interpreting available paleoclimatic proxy data, but the direct linking of depositional and geomorphic processes with the hydroclimate remains obscure. This is a consequence of the challenge of linking processes that are often studied separately and span across large spatial and temporal scales, including synoptic-scale hydroclimatic forcing, streamflows, water body hydrodynamics, fluvial and coastal sediment transport, and sedimentation. Here, we explore this chain of connected processes in the unique setting of the Dead Sea basin, where present-day hydroclimatology is closely tied with geomorphic evolution and sediment transport of streams and coasts that rapidly respond to lake-level fall. We use a 5-year (2018–2022) rich dataset of (i) high-resolution synoptic-scale circulation patterns, (ii) continuous wind-wave and rain–flood records, and (iii) storm-scale fluvial and coastal sediment transport of "smart" and marked boulders. We show the significance of Mediterranean cyclones in the concurrent activation of fluvial (floods) and coastal (wind waves) sediment conveyors. These synoptic-scale patterns drive the westerlies necessary for (i) delivering the moisture across the Judean desert, which is transformed into floods, and at the same time, (ii) the coeval, topographically funneled winds that turn into surface southerlies (>10 m s -1) along the Dead Sea rift valley. During winter, these mesoscale southerlies generate 10–30 high-amplitude, northward-propagating storm waves, with <4 m wave heights. Such waves transport cobbles for hundreds of meters alongshore, northward and away from the supplying channel mouths. Four to nine times per winter the rainfall generated by these atmospheric patterns is capable of generating floods that reach the stream mouths, delivering poorly sorted, coarse gravel. This usually occurs during the decay of the associated storm waves. This gravel is dispersed alongshore by waves during subsequent storms. As storm waves dominate and are >5 times more frequent than flash floods, coarse-clastic beach berms and fan deltas are deposited preferentially north of the delivering channel mouths. This asymmetric depositional architecture, controlled by the regional hydroclimatology, is identified for both the modern and late Pleistocene coast and delta environments, implying that the dominance of present-day Mediterranean cyclones also persisted in the region during the late Pleistocene when Lake Lisan occupied the basin. [ABSTRACT FROM AUTHOR]

The Portofino Conglomerate (PC) cropping out in the Eastern Liguria is an approximately 500 m thick, very gently folded succession mainly composed of poorly bedded and mostly matrix-supported conglomerates. It stratigraphically rests on the Helminthoid Flysch (UA3) thrusted onto the Antola Unit. We vertically distinguished three mostly ruditic litho/petrofacies: (i) Paraggi (fP) with carbonate clasts from an Helminthoid Flysch succession; (ii) Monte Pallone (fMP) with prevailing carbonate and meta-carbonate clasts and minor quartz-rich (meta)siliciclastic and high-pressure–low-pressure (HP-LP) metabasite clasts; and (iii) Monte Bocche (fMB) with dominant quartz-rich (meta)siliciclastic, meta-carbonate clasts, and minor granitoid elements and medium-temperature–high-temperature (MT-HT) regional metamorphic rocks. The middle-upper Eocen age of Paraggi litho/petrofacies is constrained by well-preserved microforaminifers (e.g., Globigerinatheka) recovered in the matrix. During its sedimentation, the directions of the paleocurrents would indicate that the PC underwent a counterclockwise rotation coeval with the first Cenozoic rotational phase of the Sardinia–Corsica system (50–30 Ma) and then stopped before the sedimentation of the Monte Pallone and Monte Bocche litho/petrofacies. The vertical compositional variation in the sedimentary inputs suggested that the PC is the result of a progressive deepening of the erosional level of a tectonic pile that can be located in the Ligurian Alps Chain. We considered the PC as the likely apical part of a submarine fan deposited in a piggy-back/thrust-top basin within the Alpine nappe stack. This sedimentary body was later tectonically transported eastward with its UA3 Helminthoid Flysch substrate (similarly to Epiligurian Units of the Northern Apennines) onto the Apenninic orogenic system (i.e., the Antola Unit). [ABSTRACT FROM AUTHOR]

The sedimentary architecture of channelized turbidites can be highly complex as it reflects the response of submarine channels to several interplaying factors. Although intensively investigated through seismic imaging, turbidite channel fills are not convincingly calibrated for sedimentary facies at a sub‐seismic scale. This contribution addresses the sedimentary architecture and the controls on the evolution of a ca 20 m thick channel‐levee complex of the Tachrift turbidite subunit (Upper Miocene, the Melloulou Formation), which accumulated along the southern slope of the Neogene Taza‐Guercif Basin (Rifian Corridor of north‐east Morocco). Facies and architectural analyses indicate that the studied channel‐levee complex is the result of three‐fold evolution. From base to top, it is comprised of: (i) a ca 7 m thick lower mud‐prone interval containing relatively small and vertically stacked channel fills with poorly developed muddy levees; (ii) a ca 4 m thick and >1 km wide sandstone‐rich middle interval made of lateral accretion packages that become progressively less amalgamated and fine‐grained and is overlain by ca 5 m of thin‐bedded mud‐rich turbidites intercalated with hemiplegic marlstones; and (iii) an up to ca 9 m thick upper interval constituted by aggradational channel fills with well‐developed levees and variously directed lateral accretion packages. This organization suggests that, following a phase of inception (lower interval), the channel underwent extensive meandering with very minor vertical aggradation, prior to being blanketed by 'retrogressive' muddy lobes (middle interval) during a phase of reduced sediment input. In turn, the uppermost interval records a late phase of channel re‐establishment and aggradation that likely terminated as a result of up‐dip avulsion. It is suggested that the observed change of architectural style reflected the feedback of changing sediment input, slope equilibrium profile and channel morphodynamics. [ABSTRACT FROM AUTHOR]

Sediment gravity flows exhibit a large range of flow behaviours, making their flow dynamics hard to predict and the resulting deposits a challenge to interpret. Cohesive sediment gravity flows containing clay are particularly complex, as their behaviour is controlled by the balance of turbulent and cohesive forces. A first set of laboratory lock‐exchange experiments investigated the effect of adding 25% very fine sand by volume to high‐density cohesive sediment gravity flows with strongly suppressed turbulence. This caused these mixed clay–sand flows to become more cohesive, have shorter runout distances, and have lower head velocities than the original pure‐clay flows, despite the increase in density difference and the non‐cohesive properties of the sand. Yield stress measurements confirmed that adding the non‐cohesive very fine sand increases the cohesive strength of dense clay suspensions. This higher cohesive strength outcompetes the enhanced density difference and reduces the flow mobility. A second set of experiments across a larger range of clay concentrations showed that, for low‐density cohesive sediment gravity flows dominated by turbulent mixing, the addition of 25% very fine sand increased the head velocities because of the enhanced density difference and weak cohesive forces. Thus, the addition of very fine sand may increase or decrease the mobility of cohesive sediment gravity flows, depending on the initial type of flow and the balance between turbulent and cohesive forces. In the natural environment, this study proposes that very fine sand can only increase the cohesive strength and reduce the flow mobility of cohesive sediment gravity flows that have a sufficiently strong matrix strength to fully support the sand particles. The contribution of very fine sand to the cohesive strength of high‐density cohesive sediment gravity flows may have important implications for flow transformation on submarine fans, especially in distal regions where transient–turbulent, cohesive flows are particularly common. [ABSTRACT FROM AUTHOR]

The Eastern Mediterranean region, extending from the Offshore Nile Delta Cone of Egypt to the Levant Basin, is a confirmed hydrocarbon-rich territory with several giant gas discoveries. Numerous gas fields have been discovered in the Miocene reservoirs within the Nile Delta Cone, and the Levant Basin. The Miocene sedimentary sequences in this region are extremely heterogeneous, consisting mainly of turbiditic slope deposits, channels, and basin floor fans that were capped by evaporites formed during the Messinian Salinity Crisis. As a result, the seismic characteristics and interpreted properties of this heterogeneous section are ambiguous. The study area is located in the Offshore North Sinai Basin, where a thick Early Miocene section was deposited midway between the Nile Delta province, which includes the El-Fayrouz discovery, and the Levant Basin, which includes Tamar, Tanin, and several other discoveries. This study uses quantitative seismic interpretations methods, such as amplitude variations with offset and fluid replacement modeling, to assess the seismic acoustic impedance trend with depth. Also, determine the seismic amplitude response for the brine and gas sands reservoir of the Early and Late Miocene section to link the unexplored study area within the North Sinai Offshore Basin with the explored Nile Delta and Levant Basins. In addition to evaluate direct hydrocarbon indicator (DHI) of the dimming seismic amplitude that is compatible with the structure's last closed contour of the Syrian Arc anticline of the Early Miocene reservoirs (EMT-1 prospect). Different vintages of 2D and 3D seismic data, six wells, and various published data were used in this study. The quantitative interpretation shows the pitfalls of the acoustic impedance trend and seismic response dependency on depth for gas and brine sand, which led to the drilling of the EMT-1 dry well. Also, the fluid replacement, P-wave velocity (Vp), and density (ρ) modeling confirmed that the seismic dimming amplitude was due to a seismic processing artifact, which was corrected by readjusting the overburden Messinian salt processing velocity model. This research concludes that the seismic quantitative interpretations are successfully used to assess the acoustic impedance versus depth and understand DHI pitfalls, as well as the processing workflow that could enhance the seismic image. [ABSTRACT FROM AUTHOR]

The Middle Jurassic–Early Cretaceous evolution of the Neuquén Basin is traditionally attributed to a long phase of thermal subsidence. However, recent works have challenged this model. In view of this, we study the Late Jurassic Tordillo Formation, a non‐marine depositional unit that marks a shift to regional regression across the basin. Previous studies propose different causes for this regression, including the growth of the magmatic arc in the west, uplift in the south or extension in the north. We studied the Tordillo Formation in sections located at an intermediate position in the Neuquén Basin, in order to understand the tectonic processes active during sedimentation. We present evidence of normal faulting within the Tordillo Formation and the base of the overlying Vaca Muerta Formation. Some of these faults can be attributed as syndepositional. We characterize the Tordillo Formation as part of a distal fan‐playa lake depositional system with a contemporaneous western magmatic arc as the main source of sediment. When compared to the Late Triassic–Early Jurassic NE to NNE‐oriented rifting, which marks the opening of the Neuquén Basin, the Late Jurassic extension shows a switch in stress orientation; the latter is orthogonal to the north‐trending subduction zone. We interpret this change as a renewed phase of back‐arc extension induced by slab rollback along with minor distributed intraplate extension prior to opening of the South Atlantic Ocean. [ABSTRACT FROM AUTHOR]

Understanding the interactions of submarine channels with seafloor deformations is challenging as these channels more often involve a wide variety of responses relying on both autogenic and allogenic factors. The effect of active growing structures on channel pathways is well documented, but the evolution of lateral migration and the internal architectures along the deflected channel bends around ongoing active structures remain poorly constrained. Here, we use 3D seismic interpretation and quantitative geomorphologic methods to examine the channel bend morphology and the kinematics of lateral migration near gravity‐driven tectonic deformation. Using high‐resolution seismic reflection data acquired from the offshore Niger Delta, two‐channel levee systems (Amaku Major System and Amaku Channel Levee System) have been recognized in the seismic survey. Each system consists of three channel complexes, recording five types of deflected channel bends, defined here as: (i) avulsed bend, (ii) confined bend, (iii) chute cut‐off bend, (iv) blocked bend and (v) kinked bend. Geomorphologic parameters including bend sinuosity, bend amplitude, along‐bend length, straight‐bend length, channel depth and width, were considered within the deflected channels. Lateral migration estimators; channel lateral shift (SH), and channel lateral spacing (CS), were assessed throughout the distances of cross‐sectional channel patterns. The lateral migration estimators (SH and CS) were used to estimate the expression of internal architectures and the evolution of lateral migration around seabed deformation at the scale of the channel complex. The results show that the morphology and internal architecture of the deflected bends, although developing in the same structural context, display varied responses to structural deformation. Unlike previously published models of channel‐fold interactions asserting tectonics as the solitary driver, here we demonstrate that the channel deflections around structures are sensitive to the lateral confinement produced by sediment relief of the outer levees, and the autogenic forcing of channel mechanisms. This study provides new insights into the evolution of submarine channels in active tectonic settings, shows detailed mechanisms of channel bends at a small scale and offers a better understanding of the distribution of sediments in the deep sea. [ABSTRACT FROM AUTHOR]

For the first time, we have interpreted and delineated the distribution of Jurassic strata in the Chaoshan Subbasin, Pearl River Basin, in unprecedented detail using the newly collected seismic data (>17,000 km 2D seismic data and >580 km2 3D seismic data). Four major reflection surfaces and three corresponding stratigraphic-structural layers were identified by analyzing seismic sections and borehole data from the LF35-1-1 well. Five distinct facies associations were identified within the stratigraphic-structural layers, including the shoreface, shallow marine, deep marine, deep-water fan, and mass-transport deposits. Based on outcrop observation, microscopic analysis, and geochemical evaluation, the Lower and Middle Jurassic deep marine mudstone has good source rock potential, and the Middle-Upper Jurassic deltaic sandstone and turbidite silty fine sandstone may be good reservoirs. Additional assessment of the study area's hydrocarbon potential has been conducted using the aromatic hydrocarbon content of seafloor sediments, and favorable exploration areas have been identified using BTEP (benzene, toluene, ethylbenzene, and xylene) content anomalies. Further simulations indicate that the Middle Jurassic hydrocarbon migration is primarily controlled by sand body distribution and faults. In summary, we propose that the most promising exploration targets should be structural (fault blocks), stratigraphic (sandstone lenses), and a combination of both. [ABSTRACT FROM AUTHOR]

With potential hydrocarbon source rocks, the Mesozoic Lower Cretaceous interval in the Aitegle Sag of the Yingen-Ejinaqi Basin in China has a bright petroleum exploration prospect. Considering the scarcity of wells in Aitegle Sag, we have systematically carried out the research on the sequence structure and sedimentary system evolution of the Lower Cretaceous based on seismic, core, and logging data, guided by the Vail classic sequence stratigraphy, and innovatively introduced the self-organizing mapping neural network (SOM) learning algorithm to assist in seismic geological analysis. The results are as follows: (1) after RMSAmp, LyapIndex, FrctDim, and InfoEntr clustering, five zones are divided, which are corresponding to five seismic facies (showing medium-strong amplitude and parallel-subparallel reflection; medium-strong amplitude and wedge-shaped divergent reflection; medium-strong amplitude and continuous-relatively continuous, parallel-subparallel reflection; strong amplitude and continuous sheet-like or blank reflection; and weak amplitude and mound-shaped chaotic reflection, respectively), and interpreted as five subfacies including delta plain front, prodelta-shallow lake, semideep lake, deep lake, and sublacustrine fan. (2) The Lower Cretaceous formation includes one second-order sequence, three third-order sequences (SQ2–SQ4), and six system tracts. In the SQ2–SQ4 circle, the delta system formed by sediments from southeast varies remarkably in the progradational zones in different system tracts, and tectonic movements and sediment supply control the sequence stratigraphy in the study area as major factors. (3) It is feasible to apply SOM learning algorithm to seismic attribute clustering analysis. This method effectively realizes the combination of geophysical methods based on big data analysis and geological problem analysis, which not only strengthens the use of seismic data but also ensures the effectiveness and reliability of clustering results. These findings offer basic data and scientific supports for the exploration and development of unconventional reservoirs (e.g., shale and tight oil/gas reservoirs) in the Aitegle Sag and also provide new ideas for studying the sequence-sediment in the target zones in the fault basin regions with scarce wells. [ABSTRACT FROM AUTHOR]

The present study aims to investigate petrography characteristics and sedimental environments of upper Olenekian-middle Anisian deposits of Nakhlak group in the sedimentary-structural zone of central Iran. To this end, a section of these deposits with a thickness of 720 meters was first selected, and 190 samples were taken from this section for preparing thin sections. Also, quantitative and qualitative laboratory tests were performed and 25 samples of sandstone were selected for point counter analysis. The results indicated that the major deposits of this formation are related to siliciclastic, carbonate, and pyroclastic types, which are in the form of two facies associations. The facies association A at the bottom of the studied section with the thickness of 90 meters has a periodicity of clastic, carbonate, and pyroclastic facies. The clastic facies of this association consists of fine-grained sandstone. In addition, the carbonate facies in association A are characterized by two microfacies consisting of intraclast oolitic grainstone and oolitic grainstone. Further, tuffite is the only pyroclastic facies related to association A, which has a laminate structure, cross-bedding lamination, herringbone bedding, and upward-thinning and thickening cycles. The facies association, B which is deposited later, is more in the middle and top part of the section. The facies association B is 660 meters thick and has a periodicity of clastic and limestone facies. Clastic facies of this association includes four lithofacies such as conglomerate, pebble coarsegrained sandstone, medium-grained sandstone to thin layer siltstone and shale. The carbonate facies consists of four microfacies such as sandy intraclastic wackestone and mudstone. Furthermore, slumping structures, cross bedding, turbulence, boudinage structure, and convolute of sediments, along with the effects of erosional channels are observed in facies B. Field and laboratory studies conducted on this succession indicate the structure of facies association A was deposited in a mixed siliciclastic carbonate ramp. Finally, submarine canyons and submarine fan environments were left by increasing the depth of the facies association B in the deep part of sea and turbidity systems. [ABSTRACT FROM AUTHOR]

The sedimentology of the Garubathan alluvial fan of north Bengal foothills is a product of Himalayan neotectonics and monsoon climate. The active neo-tectonics of the Main Central Thrust (MCT), Ramgarh Thrust (RT) and Ghis Transverse Fault (GTF) produce a huge amount of angular clasts in the upper reaches of the river Chel and Mal. During the wet season, either sediment flow by gravity or turbulent stream flow or both, move the clasts to the downhill. The tectonic zone of Main Boundary Thrust (MBT) and Main Frontal Thrust (MFT) are relative passive thrusts than the MCT, RT and GTF in the study area. A very low angle slope is observed in the area of MBT and MFT of the study area. So, the downhill deposition occurred in MBT and MFT zones of the study area. The river Chel and Mal are perinial rivers. During dry periods (pre-monsoon and post-monsoon), in the absence of sediment flow by gravity or turbulent stream flow, the low stream competency deposit the fine sediments. To identify the depositional environments three, seven and six lithofacies varieties were identified in the upper, middle and lower fan surfaces, respectively. The non-cohesive sediment flows by gravity deposited large angular boulders, cobbles and pebbles in the upper fan area. These deposits are either chaotic, unsorted, un-imbricated or graded and imbricated. Deposition of sand is scanty. Both, sediment flow by gravity and fluvial processes deposited angular to round clasts with matrix in the middle fan area. In this area the deposits are reverse graded, reverse to normally graded, laminated and cross-bedded. The high facies diversity of this area indicates highly variable nature of the depositional environments. In the lower fan area, presence of both clast-supported chaotic and matrix-supported laminated or cross-bedded layers suggests a complex nature of the depositional environment of sediment flow by gravity and fluvial processes. [ABSTRACT FROM AUTHOR]

Refrigeration and air conditioning plays a vital role in domestic and industrial heating, cooling, refrigerating and ventilation but they are contributing to ozone layer depletion and global warming due to unfriendly refrigerants and consume 33% of the world energy. The condenser is an important component of the vapor compression system which contained 30% of the refrigerant charge. The versatile one ton of refrigeration system is designed, developed for testing minichannel condenser for different condenser temperature and pressure by providing artificial condenser compartment with three air heaters of 2.2 kW capacity each with a multispeed condenser fan for controlling air velocity. Thus, the condensation temperature is reduced by 2 to 3°C due to its special geometry, passes provided, efficient cooling and the coefficient of performance increased by 10 to 15% for condensation temperature varying from 40 to 55°C whereas evaporation temperature varies from -10 to +15°C. Computational Fluid Dynamics (CFD) simulation for different sections of the minichannel condenser such as a single minichannel, single tube with 10 minichannels, first, second, third, fourth passes with varying tubes and entire condenser with all four passes for different inlet and exit temperature are performed using ANSYS FLUENT-20 CFD turbulence models and validated with the experimental results. The pressure and temperature counters for all the sections are studied and plotted. It is found that the temperature difference between experimental and CFD results are within ±15% for all the simulations along the condenser. [ABSTRACT FROM AUTHOR]