Search

We describe the impact of post-annealing on ferroelectric-domain structures in arrays of BiFeO3 (BFO) epitaxial nanoislands, which exhibit a domain evolution from an initial 71° stripe/vortex domains to center-convergent topological domains. These results suggest that the increase and redistribution of charged defects, e.g., oxygen vacancies, in BFO nanoislands play a crucial role in driving the formation of center-type domain structures. The observation of defect-driven domain evolution in BFO nanoislands provides a path for further exploring their formation mechanism, topological properties, novel functionalities, and potential applications. [ABSTRACT FROM AUTHOR]

Based on the extended Bogoliubov–de Gennes theory, the inhomogeneous stripe order and Majorana bound states are demonstrated in s -wave superconducting systems with Rashba spin–orbit interaction when the in-plane Zeeman field is applied. For a fully open square sample, topological phase transitions can be driven by the Zeeman field, and the stripe phase with spatially oscillating order parameter shows up across a critical field strength. The topological channels arise in this phase, which can be utilized to create and manipulate Majorana zero modes. Interestingly, (quasi-)one-dimensional channels with diminished pairing amplitude can be formed in narrow arms of a square loop, accompanied by the reconstruction of energy spectra of the condensate and the realization of robust Majorana zero-energy states at the ends of channels. The associated evolution of topological phases and the location of Majorana zero modes are highly sensitive to the field direction. Moreover, the effects of the rectangular aspect-ratio and the off-centered hole as well as the surface defects on Majorana end modes are explored in Rashba asymmetric loops. In comparison, the field-dependent evolution processes of low-energy levels behave more complicated because the emergence of confined topological channels can be effectively tuned by the length and width of loop arms as well as the size and position of an introduced small indentation at the outer edge. Rich patterns of Majorana corner-like states are generated for such asymmetric systems. Our theoretical predictions may shed new light on the tunability of Majorana zero modes and provide useful guidance for future experiments and applications. [ABSTRACT FROM AUTHOR]

Owing to magnetoelastic coupling, surface acoustic waves (SAWs) may be scattered resonantly by magnetic elements, such as nickel stripes. The scattering may be further enhanced via the Borrmann effect when the elements are organized into an array that matches the acoustic wavelength. We use finite-element modeling to consider single- and double-layer stripes patterned on top of a lithium niobate surface that carries Love surface waves. We do observe enhancement in the coupling for single-layer stripes, but only for Gilbert damping below its realistic value. For double-layered stripes, a weak yet clear and distinct signature of Bragg reflection is identified far away from the acoustic band edge, even for a realistic damping value. Double-layered stripes also offer better magnetic tunability when their magnetic period is different from the periodicity of elastic properties of the structure because of staggered magnetization patterns. The results pave the way for the design of magnetoacoustic metamaterials with an enhanced coupling between propagating SAWs and local magnetic resonances and for the development of reconfigurable SAW-based circuitry. [ABSTRACT FROM AUTHOR]

In a binary mixture, stripes refer to a one-dimensional periodicity of the composition, namely, a regular alternation of layers filled with particles of mostly one species. We have recently introduced [Munaò et al., Phys. Chem. Chem. Phys. 25, 16227 (2023)] a model that possibly provides the simplest binary mixture endowed with stripe order. The model consists of two species of identical hard spheres with equal concentration, which mutually interact through a square-well potential. In that paper, we have numerically shown that stripes are present in both liquid and solid phases when the attraction range is rather long. Here, we study the phase behavior of the model in terms of a density functional theory capable to account for the existence of stripes in the dense mixture. Our theory is accurate in reproducing the phases of the model, at least insofar as the composition inhomogeneities occur on length scales quite larger than the particle size. Then, using Monte Carlo simulations, we prove the existence of solid stripes even when the square well is much thinner than the particle diameter, making our model more similar to a real colloidal mixture. Finally, when the width of the attractive well is equal to the particle diameter, we observe a different and more complex form of compositional order in the solid, where each species of particle forms a regular porous matrix holding in its holes the other species, witnessing a surprising variety of emergent behaviors for a very basic model of interaction. [ABSTRACT FROM AUTHOR]

Stripes and bands are common colour patterns in snakes. Some species are known to exhibit colour polymorphism and that includes expressing it in the bands and stripes. Bridal snake, Dryocalamus is a medium‐sized arboreal snake in South to Southeast Asia and most species of the genus are banded, but including two striped species. In Borneo, banded D. subannulatus and striped D. tristrigatus occur sympatrically and the two species are similar morphologically except for their colour patterns. We hypothesized the two species in Borneo exhibit a significant colour dimorphism of one species and conducted morphological and genetical analysis to test the hypothesis. Morphological examinations revealed that D. subannulatus and D. tristrigatus are not distinguishable in Borneo by scalation. Mitochondrial phylogenetic analysis and nuclear SNP analysis showed D. subannulatus and D. tristrigatus from Borneo formed clades or clusters by region not by species. Dryocalamus subannulatus and D. tristrigatus in Borneo are morphologically and genetically indistinguishable and Bornean D. subannulatus should be treated as a colour morph of D. tristrigatus. This is a rare example of sympatrically distinct banded/striped dimorphism in snakes. Relative abundance of banded/striped morph of the genus is probably different depending on region, and any ecological factor may contribute to it. [ABSTRACT FROM AUTHOR]

The van der Waals (vdW) contact, characterized by its bondless interactions, opens up exciting possibilities in cutting‐edge mask technology. It enables incredibly close proximity to samples at the atomic level while facilitating non‐destructive engineering. In this study, the concept of a vdW metal mask using the template striped ultra‐flat Ag/Au film is introduced. The probe tip‐assisted metal film transfer under an optical microscope is employed to showcase all‐solid and residue‐free engineering on 2D materials. The robust nature of the vdW metal mask allows for various treatments, including gas, liquid, solid, plasma, and light, making it a universal tool for fabricating 2D material‐based devices and samples with sub‐1 µm resolution, all without the need for lithography technologies. With the superiority in simple sample fabrication, ultra‐clean surfaces, and robustness under harsh conditions, the technique is believed to flourish in the 2D material research field. [ABSTRACT FROM AUTHOR]

Selective area growth and epitaxial lateral overgrowth (ELOG) of semipolar (11¯$1 \left(\right. \macr \left.\right)$01) GaN stripes are demonstrated on a trench patterned vicinal (001) Si substrate fabricated by a maskless photolithography‐based process. High precision alignment enables selective mask formation to one sidewall of the trench. Selective area growth of GaN stripes is conducted from the (111) plane sidewall of Si, and ELOG region reaches ≈13 μm. The ELOG GaN crystal is dislocation‐free at most areas. The semipolar GaN stripes with atomically flat surface morphology are uniformly obtained. Light‐emitting diode structures with InGaN/GaN multiple quantum wells are grown on the 13‐μm ELOG (11¯$1 \left(\right. \macr \left.\right)$01) GaN stripes and a single photoluminescence emission peaked at 485 nm is obtained, suggesting potential for the cost‐effective semipolar micro light‐emitting diode fabrication technologies. [ABSTRACT FROM AUTHOR]

To evaluate the seismic performance of a prestressed concrete-steel hybrid (PCSH) wind turbine tower, the seismic fragility curves based on incremental dynamic analysis (IDA) and multiple stripe analysis (MSA) on a two-scale model are presented and compared. The peak ground acceleration (PGA) and peak lateral drift on the top of the tower are adopted as the intensity measure (IM) and engineering demand parameter (EDP) of analysis, respectively. Finally, the seismic performance of the PCSH tower subjected to seismic action at different soil is investigated. The fragility curves obtained by IDA and MSA methods are compared. [ABSTRACT FROM AUTHOR]

The stripe noise existing in remote sensing images badly degrades the visual quality and restricts the precision of data analysis. Therefore, many destriping models have been proposed in recent years. In contrast to these existing models, in this paper, we propose a nonconvex model with a DC function (i.e., the difference of convex functions) structure to remove the strip noise. To solve this model, we make use of the DC structure and apply an inexact proximal majorization-minimization algorithm with each inner subproblem solved by the alternating direction method of multipliers. It deserves mentioning that we design an implementable stopping criterion for the inner subproblem, while the convergence can still be guaranteed. Numerical experiments demonstrate the superiority of the proposed model and algorithm. [ABSTRACT FROM AUTHOR]

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In response to the problem of stripe noise significantly reducing the clarity and details of side-scan sonar images due to various factors, the authors of this paper propose an improved Criminisi method for stripe noise suppression. To address the issues encountered in the Criminisi algorithm during the suppression of stripe noise in side-scan sonar images, the following steps are suggested: firstly, introduce dynamic weights in the priority calculation to adaptively adjust the confidence and data term weights based on the current patch's texture complexity; secondly, utilize the Sobel operator in the data term calculation to capture the image edge information more accurately; and, thirdly, optimize the matching block search process by introducing the Manhattan distance in addition to the Sum of Squared Differences (SSD) criterion to further select the best matching block while transitioning from a global search to a local search. Experimental validation was conducted using simulated stripe noise images, comparing the proposed method with four traditional denoising techniques. The results demonstrate that the denoising effectiveness of the proposed method is superior, effectively restoring texture in noisy regions while preserving texture structure integrity. Ablation experiments validate the effectiveness of the proposed improvements. Denoising experiments on real noisy images show satisfactory results with this method, and combining it with Fourier transform for additional smoothing in certain cases may yield even better results. [ABSTRACT FROM AUTHOR]

Generic statements are commonly expressed using the bare plural – 'tigers are striped' – or the indefinite singular – 'a tiger is striped'. Notoriously, some generics can be expressed using the bare plural locution, but not the indefinite singular; bare plural generics and indefinite singular generics pattern differently. I explore this phenomenon as it applies to normative generic statements: expressions like boys don't cry, women are kind and nurturing, children are seen and not heard – that convey something over and above (and even distinct from) the descriptive reading. I argue that we should look to a metalinguistic theory of generics to understand indefinite singular normative generics. That is, a normative indefinite singular generic is a proposal about what to include in the extension of the generic term. This theory explains why it is more often than not that felicitous indefinite singular generics are about social kind terms. I argue that this explains a crucial way in which language shapes the social world. When we say things like (2), we propose definitions and uses for the word 'boy'. Such proposals and their consequences actually impact the behavior of the groups they pick out, as well as the attitudes of others towards those groups. [ABSTRACT FROM AUTHOR]

Adult zebrafish are commonly used as disease models in biomedical research, but unlike in other model organisms such as rodents, there is no simple method for distinguishing individuals, even though the importance of individual differences is recognized in such research. We developed a side viewing device that can be used to capture images of stripe patterns and identified eight distinct components of stripe patterns on the caudal and anal fins that allowed us to distinguish individual fish. We found that the stripe patterns were consistent for at least 8 weeks in males and females of two lines of wild-type zebrafish. These results suggest that individual adult zebrafish can be distinguished in an easy and non-invasive manner, allowing researchers to incorporate individual differences in biomedical research as in rodent models. [ABSTRACT FROM AUTHOR]

Wire arc additive manufacturing (WAAM) offers a viable solution for fabricating large-scale metallic parts, which contain various forms of inclined thick-walled structure. Due to the variety of heat dissipation conditions at different positions, the inclined thick-walled structure is a major challenge in fabrication that may produce collapses and defects. However, there is a lack of effective sensing method for acquiring the forming appearance of individual beads in the structure. This paper proposes a novel approach for extracting individual bead profiles during the WAAM process. The approach utilizes a structured-laser sensor to capture the morphology of the surface before and after deposition, thereby enabling an accurate acquisition of the bead profile by integrating the laser stripes. Utilizing the proposed approach, the research investigated the forming mechanism of beads in inclined thick-walled components that were fabricated by various deposition parameters. The width of the overlapping area at the overhanging feature decreased as the layer number increased, while the height of the same area increased. The height of the overlapping area in each layer increased with an increase in deposition current and decreased when the deposition speed was increased. These phenomena suggest that the heat input is a major factor that influences the formation of the overhanging feature. Both the deposition current and deposition velocity influence heat input, and thereby have an effect in enhancing the geometrical accuracy of an overhanging feature. The experimental results indicate that the proposed approach facilitates morphology change investigation, providing a sufficient reference for optimizing deposition parameters. [ABSTRACT FROM AUTHOR]

Light Sheet Fluorescence Microscopy (LSFM) is increasingly popular in neuroimaging for its ability to capture high-resolution 3D neural data. However, the presence of stripe noise significantly degrades image quality, particularly in complex 3D stripes with varying widths and brightness, posing challenges in neuroscience research. Existing stripe removal algorithms excel in suppressing noise and preserving details in 2D images with simple stripes but struggle with the complexity of 3D stripes. To address this, we propose a novel 3D U-net model for Stripe Removal in Light sheet fluorescence microscopy (USRL). This approach directly learns and removes stripes in 3D space across different scales, employing a dual-resolution strategy to effectively handle stripes of varying complexities. Additionally, we integrate a nonlinear mapping technique to normalize high dynamic range and unevenly distributed data before applying the stripe removal algorithm. We validate our method on diverse datasets, demonstrating substantial improvements in peak signal-to-noise ratio (PSNR) compared to existing algorithms. Moreover, our algorithm exhibits robust performance when applied to real LSFM data. Through extensive validation experiments, both on test sets and real-world data, our approach outperforms traditional methods, affirming its effectiveness in enhancing image quality. Furthermore, the adaptability of our algorithm extends beyond LSFM applications to encompass other imaging modalities. This versatility underscores its potential to enhance image usability across various research disciplines. [ABSTRACT FROM AUTHOR]

We report the use of wet‐spinning to 3D‐print gels from low‐molecular‐weight gelators (LMWGs) based on the 1,3 : 2,4‐dibenzylidenesorbitol (DBS) scaffold. Gel stripes assembled from DBS‐CONHNH2 and DBS‐COOH are printed, and their conductivities assessed. Printed gels based on DBS‐CONHNH2 can be loaded with Au(III), which is reduced in situ to form embedded gold nanoparticles (AuNPs). The conductivity of these gels increases because of electron transport mediated by the AuNPs, whereas the conductivity of DBS‐COOH, which does not promote AuNP formation, remains lower. We then fabricate multi‐component gel patterns comprised of spatially well‐defined domains of printed DBS‐CONHNH2/AuNP (higher conductivity) and DBS‐COOH (lower conductivity) resulting in soft multi‐domain materials with differential conductivity. Such materials have future prospects in applications such as soft nanoelectronics or tissue engineering. [ABSTRACT FROM AUTHOR]

We proposed a method to measure the topological charge of a vortex beam by using the self-rotating beam phase in this Letter. We investigated the far-field intensity patterns of the vortex beams passing through a phase hologram of the self-rotating beam with n = +2 theoretically and experimentally. The results demonstrate that the far-field intensity patterns cannot exhibit bright stripes when the topological charge of the vortex is positive (i.e., n ⋅ l > 0) and the calculated ratio relationship ξ can be used to identify the topological charge of the vortex beam. Differently, it can be found that the far-field intensity patterns exhibit several bright stripes when the topological charge of the vortex is negative (i.e., n ⋅ l < 0) and the number N of the bright stripes is equal to |l|−1(l represents the topological charge of the vortex beam). The experimental results are in good agreement with the theoretical ones. This method may inspire further research in the field of self-rotating beams. [ABSTRACT FROM AUTHOR]

Stripe noise is a prevalent issue in infrared imaging systems, characterized by its distinctive directional features, which often appear as vertical lines across the image. This type of noise can significantly degrade the quality of the captured images, making it crucial to address and mitigate its effects. This paper presents an effective strategy to tackle this problem by transforming it from a 2D image issue into a 1D signal problem, enabling efficient resolution of stripes in infrared images. By understanding the characteristics of stripe noise, the proposed algorithm effectively solves the problem by first computing the column average of the noisy image, extracting stripe components from this one-dimensional signal, and effectively removing the stripes without blurring image details. This approach has been tested on numerous images with varying noise levels, demonstrating exceptional denoising performance compared to state-of-the-art methods. The results show marked improvements in visual quality, especially around edges and smooth areas, without requiring complex algorithms or iterative processes. [ABSTRACT FROM AUTHOR]

Musician, producer, and songwriter Jack White has frequently drawn on stories of his Catholic upbringing in media appearances. However, White's Catholicism has generally been overlooked in both scholarly and popular evaluations of his work and career. I argue that, building on the literary scholar Kimberly Mack's work on the blues as a narrative tradition, White uses his own Catholic narratives to participate within that narrative tradition and construct his public image. Through engaging White's self-presentation in his music, interviews, television appearances, and other media, I examine the work that White's use of his Catholic identity does, with particular attention to its class and racial dimensions and his devotion to his hometown of Detroit, Michigan. Resumen: El músico, productor y compositor Jack White se ha basado con frecuencia en historias de su educación católica en sus apariciones en los medios. Sin embargo, el catolicismo de White generalmente ha sido pasado por alto en las evaluaciones tanto académicas como populares de su trabajo y carrera. Apoyándome en el trabajo de la académica literaria Kimberly Mack sobre el blues como tradición narrativa, sostengo que White utiliza sus propias narrativas católicas para participar dentro de esa tradición narrativa y construir su imagen pública. Recurriendo a la auto presentación de White en su música, entrevistas, apariciones en televisión y otros medios, examino el trabajo que hace el uso que hace White de su identidad católica, con especial atención a sus dimensiones raciales y de clase y su devoción a su ciudad natal de Detroit, Michigan. [ABSTRACT FROM AUTHOR]

BACKGROUND: Low-dose computed tomography (CT) has been successful in reducing radiation exposure for patients. However, the use of reconstructions from sparse angle sampling in low-dose CT often leads to severe streak artifacts in the reconstructed images. OBJECTIVE: In order to address this issue and preserve image edge details, this study proposes an adaptive orthogonal directional total variation method with kernel regression. METHODS: The CT reconstructed images are initially processed through kernel regression to obtain the N-term Taylor series, which serves as a local representation of the regression function. By expanding the series to the second order, we obtain the desired estimate of the regression function and localized information on the first and second derivatives. To mitigate the noise impact on these derivatives, kernel regression is performed again to update the first and second derivatives. Subsequently, the original reconstructed image, its local approximation, and the updated derivatives are summed using a weighting scheme to derive the image used for calculating orientation information. For further removal of stripe artifacts, the study introduces the adaptive orthogonal directional total variation (AODTV) method, which denoises along both the edge direction and the normal direction, guided by the previously obtained orientation. RESULTS: Both simulation and real experiments have obtained good results. The results of two real experiments show that the proposed method has obtained PSNR values of 34.5408 dB and 29.4634 dB, which are 1.2392–5.9333 dB and 2.828–6.7995 dB higher than the contrast denoising algorithm, respectively, indicating that the proposed method has good denoising performance. CONCLUSIONS: The study demonstrates the effectiveness of the method in eliminating strip artifacts and preserving the fine details of the images. [ABSTRACT FROM AUTHOR]

The rice cultivar ‘JJ644wx’ was developed to improve disease resistance and lodging tolerance of Korean japonica glutinous rice cultivars. ‘JJ644wx’ was derived from a cross between ‘HR27814-B-47-1-1’ (‘Sinjinbaek’), a multiple disease-resistant mid-late maturing elite line, and ‘HR29676-AC29’, a medium-maturing glutinous line with lodging tolerance. To shorten the breeding period, an anther culture method was applied to F1 plants. ‘JJ644wx’ was selected through the pedigree method, yield trials, and local adaptability tests, with high selection pressure for disease resistance and lodging tolerance. The heading date of ‘JJ644wx’ was August 11th, four days later than that of ‘Sinseonchal’. ‘JJ644wx’ exhibited strong tolerance to lodging with a short culm length. The 1,000-grain weight of brown rice of ‘JJ644wx’ was heavier than that of ‘Sinseonchal’, and its yield was 553 kg/10a, which was 10% higher than that of ‘Sinseonchal’. ‘JJ644wx’ had a higher milling performance than ‘Sinseonchal’, but a lower head rice ratio due to a higher percentage of broken rice. ‘JJ644wx’ tended to be situated between ‘Sinseonchal’ and ‘Dongjinchal’ in terms of pasting and texture characteristics. ‘JJ644wx’ is the only Korean japonica glutinous rice cultivar resistant to the most virulent bacterial blight race, K3a; it also showed resistance to rice blast and stripe virus. ‘JJ644wx’ is expected to be a valuable resource that could contribute to improving the cultivation stability of Korean japonica glutinous rice in response to climate change (Registration No. 9606). [ABSTRACT FROM AUTHOR]

The striped hyena is one of the most secretive and enigmatic mammal species. Despite some success in describing their distribution and analyzing population trends, further understanding of the factors affecting reproductive success is needed. Therefore, we present the first analysis of the reproductive success of this species in the wild. We measured the reproductive success of female striped hyenas in at least one litter over 15 breeding seasons. We inspected 33 dens with 67 breeding events during this time and recorded 151 young hyenas. The dens were inhabited for an average of 2 years, with litter sizes ranging from 1 to 4 per reproductive female and most young born between January and June. We also found that litter size was positively associated with lowland areas and shrubs near the den. Despite methodological limitations that we could not overcome given the enigmatic nature of this species, our discovery is crucial because we have shown that reproductive success depends on the habitat in which dens are located, thus ensuring consistent reproductive success over the long‐term cycle. [ABSTRACT FROM AUTHOR]

In the infrared remote sensing imaging system, the output of the detector is uneven, resulting in noticeable stripe noise in the image, which significantly reduces the image quality. Therefore, in response to the problem of establishing a variational model for the image globally and fixing the fractional order of the regularization term in the existing stripe noise removal algorithms based on model optimization, a stripe noise removal algorithm for infrared remote sensing images based on an adaptive weighted variable order model is proposed. In this algorithm, the vertical and approximate components containing stripe noise in the image are first separated through multi-level and multi-scale wavelet transform, and only these two components are processed; secondly, the global sparsity and the gradient sparsity of stripe noise and the variable order gradient sparsity of the information component are constrained by L1 norm, so as to establish the stripe noise removal model. The order of the fractional derivative is adaptively assigned to each pixel of the information component through local variance; then, an adaptive weight operator is introduced, which can assign different weights to the pixels in the variable order derivative of the information component on the basis of the image gradient information. Finally, through the ADMM algorithm, we can obtain the optimal solution of this model. The processing results of simulated and actual data indicate that the proposed algorithm performs well in all indexes and has obvious advantages in removing stripe noise and preserving image details. [ABSTRACT FROM AUTHOR]

In this paper, I argue that not only is metaphysical modal normativism an attractive view but that, as a matter of fact, many of us have, all along, been metaphysical modal normativists of a particular stripe. Namely, we have been the kinds of modal normativists, in the form of counterpart theorists, who are robust realists about possibility simpliciter. Having introduced modal normativism as Thomasson does in Norms and Necessity, I go on to recast it in somewhat different terms. With this re-casting in place we can see that while the view offers a pleasingly deflationary account of metaphysical necessity and possibility it does so only against the backdrop of robust realism about possibility simpliciter. If that is right, then Lewis' counterpart theory turns out to be a potent version of metaphysical modal normativism. So many of us have, all along, been metaphysical modal normativists, and so much the better for it. [ABSTRACT FROM AUTHOR]

Over the course of six months in 1986, the Liberation Tigers of Tamil Eelam (LTTE) eliminated their rival militant organizations, despite being significantly outgunned and outmanned by some of these groups. Relying primarily on contemporaneous accounts in Tamil and English, this article traces the process by which the LTTE became the primary avatar of Tamil nationalism, and explores the question of why consolidation unfolded so violently in this case. We argue that the answer lies in the LTTE's successful portrayal of this violence as order-upholding rather than destructive, and attribute their ability to do this to the fact that much of the population perceived the LTTE as the most legitimate user of violence among the militants. [ABSTRACT FROM AUTHOR]

The evolution process of magnetic domains in response to external fields is crucial for the modern understanding and application of spintronics. In this study, we investigated the domain rotation in stripe domain films of varying thicknesses by examining their response to microwave excitation in four different orientations. The resonance spectra indicate that the rotation field of stripe domain film under an applied magnetic field approaches the field where the resonance mode of sample changes. The saturation field of the stripe domain film corresponds to the field where the resonance mode disappears when measured in the stripe direction parallel to the microwave magnetic field. The results are reproducible and consistent with micromagnetic simulations, providing additional approaches and techniques for comprehending the microscopic mechanisms of magnetic domains and characterizing their rotation. [ABSTRACT FROM AUTHOR]

Many animals possess high-contrast body patterns. When moving, these patterns may create confusing or conflicting visual cues that affect a predator's ability to visually target or capture them, a phenomenon called motion dazzle. The dazzle patterns may generate different forms of optical illusion that can mislead observers about the shape, speed, trajectory and range of the animal. Moreover, it is possible that the disruptive visual effects of the high contrast body patterns can be enhanced when moving against a high contrast background. In this study, we used the humbug damselfish (Dascyllus aruanus) to model the apparent motion cues of its high contrast body stripes against high contrast background gratings of different widths and orientations, from the perspective of a predator. We found with higher frequency gratings, when the background is indiscriminable to a viewer, that the humbugs may rely on the confusing motion cues created by internal stripes. With lower frequency gratings, where the background is likely perceivable by a viewer, the humbugs can rely more on confusing motion cues induced by disruption of edges from both the background and body patterning. We also assessed whether humbugs altered their behaviour in response to different backgrounds. Humbugs remained closer and moved less overall in response to backgrounds with a spatial structure similar to their own striped body pattern, possibly to stay camouflaged against the background and thus avoid revealing themselves to potential predators. At backgrounds with higher frequency gratings, humbugs moved more which may represent a greater reliance on the internal contrast of the fish's striped body pattern to generate motion dazzle. It is possible that the humbug stripes provide multiple protective strategies depending on the context and that the fish may alter their behaviour depending on the background to maximise their protection. [ABSTRACT FROM AUTHOR]

Estuarine environments are recognized as critical nursery habitats that are necessary to sustain overall fish production. Striped bass Morone saxatilis support recreational and commercial fisheries along the Atlantic coast of the United States, and annual surveys to assess juvenile (age-0) abundance in Chesapeake Bay, the major producing area for the population, have long been used in management. Factors that contribute to high juvenile abundance are not fully understood. We used catch data from fishery-independent surveys coupled with hindcasts from a pair of numerical models to quantify the extent of summer habitats used by age-0 striped bass throughout Chesapeake Bay for 1996–2017. Specific conditions that defined habitat suitability for age-0 striped bass varied throughout the summer and among years, reflecting changes in water quality and habitat use. Shallow, nearshore areas throughout the Bay consistently supported suitable conditions for age-0 striped bass, but the estimated extent of suitable habitat varied annually at both regional and local, tributary-specific, scales. Although the areal extent of suitable habitat Bay-wide in early summer declined since 1996, fish production was not limited. Nonetheless, a pattern of increasing relative abundance of age-0 striped bass with greater extent of suitable habitats in Chesapeake Bay was observed, suggesting that the availability of suitable habitats at the scale of individual tributaries and Bay-wide may play an important role in production of this estuarine-dependent species. [ABSTRACT FROM AUTHOR]

Hexagonal manganites exhibit three distinct domain patterns: stripe, loop, and vortex. Due to the high ferroelectric phase transition temperature and the lack of reliable visualization methods, it is still a mystery about the evolution and the formation of vortex networks. In this study, we managed to capture the coexistence of vortices, loops, and stripes by accurately controlling the annealing temperature right at Tc. We proposed a merging process between the V–AV pair and the stripe, which result in two different forms of vortex networks, namely, the normal vortex and the zigzag vortex. In addition, the connection between the density of stripes and the orientation of V–AV pairs is analyzed, which are both influenced by self-straining of the crystal. The mystery of evolution of the vortex network is unveiled by capturing the snapshot, and the experimental database provided calls for more analysis to understand the evolution of different domain topologies. [ABSTRACT FROM AUTHOR]

Hexagonal manganites exhibit three distinct domain patterns: stripe, loop, and vortex. Due to the high ferroelectric phase transition temperature and the lack of reliable visualization methods, it is still a mystery about the evolution and the formation of vortex networks. In this study, we managed to capture the coexistence of vortices, loops, and stripes by accurately controlling the annealing temperature right at Tc. We proposed a merging process between the V–AV pair and the stripe, which result in two different forms of vortex networks, namely, the normal vortex and the zigzag vortex. In addition, the connection between the density of stripes and the orientation of V–AV pairs is analyzed, which are both influenced by self-straining of the crystal. The mystery of evolution of the vortex network is unveiled by capturing the snapshot, and the experimental database provided calls for more analysis to understand the evolution of different domain topologies. [ABSTRACT FROM AUTHOR]

Introduction and Purpose: In last years gene modification technologies such as CRISPR/Cas9 has had a revolutionary impact on the treatment of inherited diseases. Technologies developed from bacterial defense mechanisms, has become a basic tools in scientific research and medical therapies. In our article we provided an overview of applications of gene modifications technologies, directly focusing on CRISPR/Cas9, in genetic disease treatment. State of Knowledge: New applications of CRISPR/Cas9 are still being explored. Treating inherited diseases such as cystic fibrosis, Duchenne muscular dystrophy, thalassemia, hemophilia, Huntington's disease, Crigler-Najjar syndrome, sickle cell anemia, Marfan syndrome, and phenylketonuria, is feasible with this novel technique. A comparative analysis with other gene editing methods highlights CRISPR/Cas9's efficacy, ease of use, and multiplexing capabilities. Summary: CRISPR/Cas9 is a groundbreaking technology with broad applications in genetic research and therapy. Its ease of use, cost-effectiveness, and ability to target multiple genes simultaneously position it as a preferred method. However, there are some challenges associated with precision issues and ethical considerations in human embryo gene editing. As CRISPR/Cas9 continues to evolve, responsible application and ethical considerations are important for maximizing its potential in treatment of genetic diseases. [ABSTRACT FROM AUTHOR]

CO2 is one of the primary greenhouse gases impacting global climate change, making it crucial to understand the spatiotemporal variations of CO2. Currently, commonly used satellites serve as the primary means of CO2 observation, but they often suffer from striping issues and fail to achieve complete coverage. This paper proposes a method for constructing a comprehensive high-spatiotemporal-resolution XCO2 dataset based on multiple auxiliary data sources and satellite observations, utilizing multiple simple deep neural network (DNN) models. Global validation results against ground-based TCCON data demonstrate the excellent accuracy of the constructed XCO2 dataset (R is 0.94, RMSE is 0.98 ppm). Using this method, we analyze the spatiotemporal variations of CO2 in China and its surroundings (region: 0°–60° N, 70°–140° E) from 2019 to 2020. The gapless and fine-scale CO2 generation method enhances people's understanding of CO2 spatiotemporal variations, supporting carbon-related research. [ABSTRACT FROM AUTHOR]

The influences of the forward-facing step (FFS) and backward-facing step (BFS) on the 7° half-angle conical boundary layer instability and transition are investigated at different angles-of-attack (AoAs) in a hypersonic quiet wind tunnel using the Nano-tracer-based Planar Laser Scattering techniques, Temperature-Sensitive Paints, and high-frequency pressure sensors. The results show that the FFS stabilizes the second mode instability but strongly destabilizes the crossflow instability. Conversely, the BFS destabilizes both the second mode and crossflow instabilities, yet its impact on crossflow instability is weaker compared to that of an FFS with an identical height. At a small AoA (AoA < 3° in this paper), the boundary layer transition is dominated by the second mode instability. For sharp cones, the transition is delayed on the windward side but promoted on the leeward side, resulting in a monotonically inclined transition front. In contrast, blunt cones exhibit localized depressions in the transition front on the leeward side. At large AoA, the transition process is dominated by the crossflow instability, resulting in heat flux stripes on the leeward side, making the transition front distribution more complex. Therefore, at small AoAs, the promotion effect of the BFS on the conical boundary layer transition is stronger than that of the FFS with the same height. Moreover, the FFS with a small height even exhibits a suppressive effect on the transition. However, as the AoA increases, low-frequency instability modes, such as crossflow instability, gradually become dominant. Consequently, the promoting effect of the FFS surpasses that of the BFS. [ABSTRACT FROM AUTHOR]

The dorsal color pattern, together with the morphology of the copulatory apparatus, provide important taxonomic characteristics for the identification of land planarians. In genera such as Paraba, in which most species have a morphologically similar copulatory apparatus and a dorsum with several stripes that vary according to color, width, and arrangement, the existence of pseudocryptic species can lead to a misidentification and underestimation of their diversity. In this work we describe three new species of Paraba which, due to the color pattern, have been mistaken for already described species of the genus. Specimens were collected in different forest formations of the southern Atlantic Forest, Brazil. The new species can be distinguished from each other and from other congeners through the color pattern of the dorsal surface of the body combined with some features of the copulatory apparatus, like the anatomy of the prostatic vesicle and the male atrium. Additionally, we propose an emendation to the diagnosis of Paraba based on characters observed in the three new species and some characteristics occurring in other species of the genus. [ABSTRACT FROM AUTHOR]

The fine-grained ship classification (FGSC) task in remote sensing aims to distinguish subordinate ship categories. Due to the high similarity among different subcategories and the significant variations in pose, scale, rotation, and color within the same subcategory in the fine-grained ship datasets, the FGSC task is extremely challenging. To alleviate these issues, a novel approach, named Dual-Stream Network (DSNet), is proposed in this paper for FGSC. DSNet consists of two sub-branches: the Local Residual Branch (LRB) and the Global Representation Branch (GRB). Specifically, the LRB effectively extracts the most discriminative local fine-grained features of the target using Full-scale Skip Connections (FSC) and Stripe Pooling Add (SPA) modules. The GRB captures global contextual information through Swin-Transformer (Swin-T), establishing remote dependencies of the target and extracting global coarse-grained features. Furthermore, a Lightweight Fusion (LF) block is designed in the feature fusion module to combine the feature information from the two branches. This ensures that the discriminative global and local information complement each other without overwhelming one another, thereby effectively improving the performance of the model. Extensive experiments and analyses demonstrate that our proposed method achieves state-of-the-art performance on two mainstream FGSC datasets in remote sensing. [ABSTRACT FROM AUTHOR]

Copyright of Forensic Science & Technology is the property of Institute of Forensic Science, Ministry of Public Security and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this paper, we propose a minimization-based image denoising model for the removal of mixed stripe and Gaussian noise. The objective function includes the prior information from both the stripe noise and image. Specifically, we adopted a unidirectional regularization term and a nonconvex group sparsity term for the stripe noise component, while we utilized a nonconvex fractional order total variation (FTV) regularization for the image component. The priors for stripes enable adequate extraction of periodic or non-periodic stripes from an image in the presence of high levels of Gaussian noise. Moreover, the nonconvex FTV facilitates image restoration with less staircase artifacts and well-preserved edges and textures. To solve the nonconvex problem, we employed an iteratively reweighted ℓ1 algorithm, and then the alternating direction method of multipliers was adopted for solving subproblems. This led to an efficient iterative algorithm, and its global convergence was proven. Numerical results show that the proposed model provides better denoising performance than existing models with respect to visual features and image quality evaluations. [ABSTRACT FROM AUTHOR]

We examine deep optical images of edge-on galaxies selected from the Sloan Digital Sky Survey (SDSS) Stripe 82. The entire sample consists of over 800 genuine edge-on galaxies with spectroscopic redshifts out to |$z\sim 0.2$|⁠. To discern the faintest details around the galaxies, we use three different data sources with a photometric depth of down to 30 mag arcsec |$^{-2}$| in the r band: SDSS Stripe 82, Hyper Suprime-Cam Strategic Program, and DESI Legacy Imaging Surveys. Our analysis of the deep images reveals a variety of low surface brightness features. 49 galaxies exhibit prominent tidal structures, including tidal tails, stellar streams, bridges, and diffuse shells. Additionally, 56 galaxies demonstrate peculiar structural features such as lopsided discs, faint warps, and dim polar rings. Overall, we detect low surface brightness structures in 94 galaxies out of 838, accounting for 11  per cent of the sample. Notably, the fraction of tidal structures is only 5.8  per cent, which is significantly lower than that obtained in modern cosmological simulations and observations. Previous studies have shown that strongly interacting galaxies have stellar discs about 1.5–2 times thicker than those without apparent interactions. In an analysis where tidal features are carefully masked for precise disc axis ratio measurements, we show that discs of galaxies with tidal features are 1.33 times thicker, on average, than control galaxies that do not have visible tidal features. Furthermore, we find that edge-on galaxies with tidal structures tend to have a higher fraction of oval and boxy discs than galaxies without tidal features. [ABSTRACT FROM AUTHOR]