Search

Periostitis ossificans (PO) is a specific type of chronic osteomyelitis. Radiographically, it is characterized by the presence of lamellae of newly formed periosteal bone outside the cortex, giving the characteristic appearance of "onion skin." The most common cause of PO is periapical infection of the mandibular permanent first molar, which occurs primarily in children and young adults. Treatment in these cases is directed toward eliminating the source of the infection, either by extraction of the offending tooth or endodontic therapy. he purpose of this paper is to present a case of PO involving a permanent mandibular first molar managed with endodontic treatment. [ABSTRACT FROM AUTHOR]

The objectives of this study were to compare the polymerization shrinkage of three orthodontic adhesives. In addition we wanted to determine the effectiveness of the high-intensity quartz tungsten halogen (HQTH) in curing orthodontic adhesives on polymerization shrinkage with that of the quartz tungsten halogen (QTH). A total of 120 glass ring molds were prepared using a low-speed saw. The internal surface of the glass rings were roughened and etched. Adhesive pastes were placed into the glass molds, which were sandwiched between two glass slides. Samples were divided into six groups according to the combination of three orthodontic adhesives (Kurasper F, Light Bond, and Transbond XT) and two light intensities. One half of each 40 samples of three adhesive pastes was polymerized for 20 seconds by a QTH (Hilux 350), and the other half was polymerized for 10 seconds by a HQTH (Optilux 501). The volumetric polymerization shrinkage for each system was measured through the specific density method modified by Puckett and Smith. Statistical analysis was performed using two-way analysis of variance for intergroup comparisons. The HQTH-curing unit resulted in a more polymerization shrinkage than did the QTH for all investigated adhesives. However, no statistically significant differences were found. The highest shrinkage was observed for Light Bond cured with HQTH (1.59 ± 0.82%), and the lowest value was observed for Transbond XT cured with QTH (1.23 ± 0.60%). There are no significant differences in polymerization shrinkage of the three investigated orthodontic adhesives when polymerized with a QTH or a HQTH. [ABSTRACT FROM AUTHOR]

The purpose of this study was to determine whether the application of two antibacterial mouth rinses to etched and unetched enamel affects the shear bond strength (SBS) of an orthodontic composite resin. Eighty-five lower human incisors were divided into five groups, ie, group 1; control group, no mouth rinse was used; groups 2 and 3: mouth rinses were applied to the intact enamel surface before etching; groups 4 and 5: mouth rinses were applied to the etched enamel. A bonding agent and a composite resin were applied to the teeth surface. For shear bond testing, the specimens were mounted in a universal testing machine, and an apparatus attached to a compression load cell was applied to each specimen until failure occurred. The data were analyzed using analysis of variance and Tukey honestly significance tests. Fracture modes were analyzed by Mann-Whitney U-test. There was no statistically significant difference between the SBS values of group 1 (31.64 ± 3.62 MPa) and group 4—five experimental applications (P ≥ .05). However, the SBS value of group 3 (36.56 ± 5.95 MPa) was significantly larger than those of group 4 (30.00 ± 4.97 MPa) and group 5 (30.26 ± 7.30 MPa). In addition, no significant differences were observed between group 1 and groups 2 (34.33 ± 7.26 MPa) and 3 (36.56 ± 5.95 MPa) (P ≥ .05). Because the application of chlorhexidine and povidone-iodine before acid etching did not cause any decrease in bond strength, it is advisable for use under the orthodontic resin composite to obtain an antibacterial effect or to prevent the risk of bacteremia. [ABSTRACT FROM AUTHOR]

Objectives: The aim of this study was to test the hypothesis that the bonding ability of antibacterial bonding system to primary dentin was not different from the parental material which did not contain any antibacterial component., Methods: Extracted human non-carious primary molars were ground to expose the coronal dentin, and then randomly divided into two experimental groups: treatment with Clearfil Protect Bond or with Clearfil SE Bond (Kuraray Medical Inc.). Composite-dentin sticks with a cross-sectional area of approximately 0.90 mm(2) were prepared and subsequently subjected to microtensile bond strength (muTBS) and microshear bond strength (muSBS) tests. For the muTBS tests, specimens were attached to an Instron testing machine with a cyanoacrylate adhesive. For muSBS testing, the sticks were mechanically fixed to the muSBS testing apparatus. The bonds were stressed in shear or tension at a crosshead speed of 1mm/min until failure occurred. Resin-dentin interfaces produced by each system were examined using SEM. The data were analyzed with Mann-Whitney's U test., Results: The muTBS and muSBS of Clearfil Protect Bond were 30.69+/-9.71 and 9.94+/-3.78 MPa, respectively. Clearfil SE Bond showed significantly greater values of 37.31+/-9.57 and 12.83+/-3.15 MPa, respectively. SEM analysis demonstrated similar micro-morphological features including the thickness of the hybrid layer for both materials., Conclusions: It was showed that antibacterial self-etching system Clearfil Protect Bond showed lower bond strength values compared to primary dentin than that of to Clearfil SE Bond on primary dentin. (Eur J Dent 2008;2:11-17).

Objectives: The aim of this study was to determine the fluoride levels in breast milk and plasma of lactating mothers who regularly consumed drinking water with low levels of fluoride., Methods: One hundred twenty five healthy mothers aged between 20-30 years old who had given birth within 5-7 days were included in the study. Besides being otherwise healthy, the primary selection criteria stipulated the absence of fluoride supplement consumption one month before delivery. Approximately 5 ml breast milk and 5 ml blood samples were obtained from each participating mother at a hospital setting, where the mothers were scheduled for a regular hospital diet. The blood samples were centrifuged in fluoride-free heparinized polyethylene tubes and stored at -18 degrees C until measurements were made. Breast milk samples were directly refrigerated as with blood samples until measurements. The fluoride concentrations of milk and blood samples were assessed using an ion-selective fluoride electrode combined with an ion analyzer., Results: The fluoride levels of the plasma and breast milk samples were measured as 0.017+/-0.011 ppm and 0.006+/-0.002 ppm, respectively. The fluoride concentration of plasma was significantly higher than that of breast milk (P<.01). Correlation analysis revealed a significant relation between the groups (P<.01)., Conclusion: A limited level of fluoride transmission from plasma to breast milk was detected. Nevertheless, a significant correlation between the fluoride concentrations of breast milk and plasma was evident.

A self-etching dentin adhesive was evaluated for its ability to bond to caries-affected and sound dentin after applying three desensitizers to the gingival walls. Sixty extracted human molars, with approximal dentin caries, were cut horizontally on the long axis of the tooth through caries-affected gingival walls. Carious dentin was removed with SiC paper by means of a caries detector to expose caries-affected dentin. The molars were randomly assigned to four groups: control and three experimental groups-Micro Prime, Glauma Desentizer and Cervitec. Desensitizers were applied to the dentinal surfaces according to manufacturers' instructions. A resin composite was bonded to both the caries-affected and sound dentin of each tooth using a bonding system and plastic rings. The restoration was debonded by shear bond strength. The application of Micro Prime and Gluma Desensitizer to caries-affected dentin did not show any effect on bond strength testing. However, Cervitec caused a decrease in bond strength to caries-affected dentin. The effect of desensitizers on the bond strength of the self-etch bonding agent to caries-affected dentin changed according to the chemical composition of the materials. Desensitizer application on sound dentin is recommended with self-etch bonding systems.

The purpose of this study was to determine whether the application of two antibacterial mouth rinses to etched and unetched enamel affects the shear bond strength (SBS) of an orthodontic composite resin. Eighty-five lower human incisors were divided into five groups, ie, group 1: control group, no mouth rinse was used; groups 2 and 3: mouth rinses were applied to the intact enamel surface before etching; groups 4 and 5: mouth rinses were applied to the etched enamel. A bonding agent and a composite resin were applied to the teeth surface. For shear bond testing, the specimens were mounted in a universal testing machine, and an apparatus attached to a compression load cell was applied to each specimen until failure occurred. The data were analyzed using analysis of variance and Tukey honestly significance tests. Fracture modes were analyzed by Mann-Whitney U-test. There was no statistically significant difference between the SBS values of group 1 (31.64 +/- 3.62 MPa) and group 4-five experimental applications (P > or = .05). However, the SBS value of group 3 (36.56 +/- 5.95 MPa) was significantly larger than those of group 4 (30.00 +/- 4.97 MPa) and group 5 (30.26 +/- 7.30 MPa). In addition, no significant differences were observed between group 1 and groups 2 (34.33 +/- 7.26 MPa) and 3 (36.56 +/- 5.95 MPa) (P > or = .05). Because the application of chlorhexidine and povidone-iodine before acid etching did not cause any decrease in bond strength, it is advisable for use under the orthodontic resin composite to obtain an antibacterial effect or to prevent the risk of bacteremia.