Search

Noncoherent communication systems have regained interest due to the growing demand for high-mobility and low-latency applications. Most existing studies using large antenna arrays rely on the far-field approximation, which assumes locally plane wavefronts. This assumption becomes inaccurate at higher frequencies and shorter ranges, where wavefront curvature plays a significant role and antenna arrays may operate in the radiative near field. In this letter, we adopt a model for the channel spatial correlation matrix that remains valid in both near and far field scenarios. Using this model, we demonstrate that noncoherent systems can leverage the benefits of wavefront spherical curvature, even beyond the Fraunhofer distance, revealing that the classical far-field approximation may significantly underestimate system performance. Moreover, we show that large antenna arrays enable the multiplexing of various users and facilitate near-optimal noncoherent detection with low computational complexity., Comment: This work has been submitted to the IEEE for possible publication

A novel approach for the measurement of the Nitrogen active species generated by a plasma source in the molecular beam epitaxy environment is here presented. The method is based on the analysis of the variations in the optical signal measured by a pyrometer during a two step, Gallium rich and Nitrogen controlled, growth modes. The method permits a precise, quantitative and direct measurement of the flux of active species as a function of the plasma generation parameters of the cell: nitrogen gas flux and RF-power.

Accurate estimation of the cascaded channel from a user equipment (UE) to a base station (BS) via each reconfigurable intelligent surface (RIS) element is critical to realizing the full potential of the RIS's ability to control the overall channel. The number of parameters to be estimated is equal to the number of RIS elements, requiring an equal number of pilots unless an underlying structure can be identified. In this paper, we show how the spatial correlation inherent in the different RIS channels provides this desired structure. We first optimize the RIS phase-shift pattern using a much-reduced pilot length (determined by the rank of the spatial correlation matrices) to minimize the mean square error (MSE) in the channel estimation under electromagnetic interference. In addition to considering the linear minimum MSE (LMMSE) channel estimator, we propose a novel channel estimator that requires only knowledge of the array geometry while not requiring any user-specific statistical information. We call this the reduced-subspace least squares (RS-LS) estimator and optimize the RIS phase-shift pattern for it. This novel estimator significantly outperforms the conventional LS estimator. For both the LMMSE and RS-LS estimators, the proposed optimized RIS configurations result in significant channel estimation improvements over the benchmarks., Comment: 16 pages, 9 figures, to appear in IEEE Transactions on Wireless Communications

Cell-free massive multiple-input multiple-output (mMIMO) networks enhance coverage and spectral efficiency (SE) by distributing antennas across access points (APs) with phase coherence between APs. However, the use of cost-efficient local oscillators (LOs) introduces phase noise (PN) that compromises phase coherence, even with centralized processing. Sharing an LO across APs can reduce costs in specific configurations but cause correlated PN between APs, leading to correlated interference that affects centralized combining. This can be improved by exploiting the PN correlation in channel estimation. This paper presents an uplink orthogonal frequency division multiplexing (OFDM) signal model for PN-impaired cell-free mMIMO, addressing gaps in single-carrier signal models. We evaluate mismatches from applying single-carrier methods to OFDM systems, showing how they underestimate the impact of PN and produce over-optimistic achievable SE predictions. Based on our OFDM signal model, we propose two PN-aware channel and common phase error estimators: a distributed estimator for uncorrelated PN with separate LOs and a centralized estimator with shared LOs. We introduce a deep learning-based channel estimator to enhance the performance and reduce the number of iterations of the centralized estimator. The simulation results show that the distributed estimator outperforms mismatched estimators with separate LOs, whereas the centralized estimator enhances distributed estimators with shared LOs., Comment: 13 pages, 8 figures, submitted to an IEEE Journal

This paper investigates how semantic communication can effectively influence and potentially redefine the limitations imposed by physical layer settings. Reconfigurable Intelligent Surfaces (RIS) enable the intelligent configuration of the physical layer of communication systems. However, its practical implementation is hampered by several limitations. The Semantic Communication (SemCom) paradigm introduces additional degrees of freedom that can be exploited to improve the robustness of communication against physical layer impairments. In essence, SemCom ensures that the data representation remains robust even under adverse physical conditions by emphasizing the transmission of meaningful information in a manner that is less susceptible to degradation. Through the use of SemCom, potential RIS gains are demonstrated in terms of RIS area size and the phase shift precision of its active elements., Comment: This paper has been accepted for publication in IEEE Globecom Workshop on Generative Horizons: Exploring Goals through Semantic Communication

The spatial organization of chromatin within the nucleus plays a crucial role in gene expression and genome function. However, the quantitative relationship between this organization and nuclear biochemical processes remains under debate. In this study, we present a graph-based generative model, bioSBM, designed to capture long-range chromatin interaction patterns from Hi-C data and, importantly, simultaneously, link these patterns to biochemical features. Applying bioSBM to Hi-C maps of the GM12878 lymphoblastoid cell line, we identified a latent structure of chromatin interactions, revealing 12 distinct communities that strongly align with known biological annotations. Additionally, we infer a linear transformation that maps biochemical observables, such as histone marks, to the parameters of the generative graph model, enabling accurate genome-wide predictions of chromatin contact maps on out-of-sample data, both within the same cell line, and on the completely unseen HCT116 cell line under RAD21 depletion. These findings highlight bioSBM's potential as a powerful tool for elucidating the relationship between biochemistry and chromatin architecture and predicting long-range genome organization from independent biochemical data.

Long Wavelenght infrared devices, despite growing interest due to a wide range of applications in commercial, public, and academic sectors, are still struggling to achieve significant improvements over well-established technologies like HgCdTe detectors. Devices based on quantum nanostructures remain non competitive due to unresolved drawbacks, the most significant being the need to cool down to liquid nitrogen temperatures to improve the signal-to-noise ratio. In this work, we demonstrate an innovative solution to surpass the current generation of quantum dot-based detectors by exploiting the absorption from quantum dot localized states to resonant states in the continuum, that is states in the semiconductor conduction band with an enhanced probability density in the quantum dot region. This unprecedented approach takes advantage of the unique properties of such states to massively enhance carrier extraction, allowing to overcome one of the most crucial drawbacks of quantum dot-based infrared detectors. This innovative solution is discussed here from both theoretical and experimental perspectives. The measured room temperature operation with high detectivity demonstrates that exploiting resonant states absorption in quantum dots offers the long-sought solution for the next generation of infrared photodetectors.

Large-scale MIMO systems with a massive number N of individually controlled antennas pose significant challenges for minimum mean square error (MMSE) channel estimation, based on uplink pilots. The major ones arise from the computational complexity, which scales with $N^3$, and from the need for accurate knowledge of the channel statistics. This paper aims to address both challenges by introducing reduced-complexity channel estimation methods that achieve the performance of MMSE in terms of estimation accuracy and uplink spectral efficiency while demonstrating improved robustness in practical scenarios where channel statistics must be estimated. This is achieved by exploiting the inherent structure of the spatial correlation matrix induced by the array geometry. Specifically, we use a Kronecker decomposition for uniform planar arrays and a well-suited circulant approximation for uniform linear arrays. By doing so, a significantly lower computational complexity is achieved, scaling as $N\sqrt{N}$ and $N\log N$ for squared planar arrays and linear arrays, respectively., Comment: To appear on IEEE Transactions on Wireless Communications, 11 figures, 3 tables

The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end., Comment: Submitted to Proceedings of the IEEE, 36 pages, 23 figures

Consider a communication system in which a single antenna user equipment exchanges information with a multi-antenna base station via a reconfigurable intelligent surface (RIS) in the presence of spatially correlated channels and electromagnetic interference (EMI). To exploit the attractive advantages of RIS technology, accurate configuration of its reflecting elements is crucial. In this paper, we use statistical knowledge of channels and EMI to optimize the RIS elements for i) accurate channel estimation and ii) reliable data transmission. In both cases, our goal is to determine the RIS coefficients that minimize the mean square error, resulting in the formulation of two non-convex problems that share the same structure. To solve these two problems, we present an alternating optimization approach that reliably converges to a locally optimal solution. The incorporation of the diagonally scaled steepest descent algorithm, derived from Newton's method, ensures fast convergence with manageable complexity. Numerical results demonstrate the effectiveness of the proposed method under various propagation conditions. Notably, it shows significant advantages over existing alternatives that depend on a sub-optimal configuration of the RIS and are derived on the basis of different criteria., Comment: 13 pages, 10 figures

Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix depends on the polarization and antenna arrangement. We optimize the rank and condition number by identifying the optimal antenna spacing in dual-polarized planar antenna arrays with imperfect isolation. The result is sparely spaced antenna arrays that exploit radiative near-field properties. We further optimize the array geometry for minimum aperture length and aperture area, which leads to different configurations. Moreover, we prove analytically that for fixed-sized arrays, the MIMO rank grows quadratically with the carrier frequency in LOS scenarios, if the antennas are appropriately designed. Hence, MIMO technology contributes more to the capacity growth than the bandwidth. The numerical results show that massive data rates, far beyond 1 Tbps, can be reached both over fixed point-to-point links. It is also possible for a large base station to serve a practically-sized mobile device., Comment: in IEEE Transactions on Wireless Communications

Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.

Holographic MIMO refers to a (possibly large) array with a large number of individually controlled and densely deployed antennas. The objective of this paper is to provide further insight into the use of closely spaced antennas in the uplink and downlink of a multi-user Holographic MIMO system. To this end, we utilize multiport communication theory, which ensures physically consistent uplink and downlink models. We first consider a simple uplink scenario with two side-by-side half-wavelength dipoles, two users, and single-path line-of-sight propagation, and show both analytically and numerically that the array gain and average spectral efficiency strongly depend on the directions from which the signals are received and on the array matching network used. The numerical results are then used to extend the analysis to more practical scenarios involving larger arrays of dipoles (arranged in a uniform linear array) and a larger number of users. The case where the antennas are densely packed in a space-constrained factor form is also considered. It is found that the spectral efficiency increases with decreasing antenna spacing only for arrays of moderate size, e.g. in the order of a few wavelengths. In comparison, larger arrays with closely spaced antennas show only marginal improvements in spectral efficiency compared to half-wavelength arrays., Comment: 16 pages, 13 figures, submitted to IEEE Transactions on Wireless Communications

We present DiffInfinite, a hierarchical diffusion model that generates arbitrarily large histological images while preserving long-range correlation structural information. Our approach first generates synthetic segmentation masks, subsequently used as conditions for the high-fidelity generative diffusion process. The proposed sampling method can be scaled up to any desired image size while only requiring small patches for fast training. Moreover, it can be parallelized more efficiently than previous large-content generation methods while avoiding tiling artifacts. The training leverages classifier-free guidance to augment a small, sparsely annotated dataset with unlabelled data. Our method alleviates unique challenges in histopathological imaging practice: large-scale information, costly manual annotation, and protective data handling. The biological plausibility of DiffInfinite data is evaluated in a survey by ten experienced pathologists as well as a downstream classification and segmentation task. Samples from the model score strongly on anti-copying metrics which is relevant for the protection of patient data.

Pruning deep neural networks is a widely used strategy to alleviate the computational burden in machine learning. Overwhelming empirical evidence suggests that pruned models retain very high accuracy even with a tiny fraction of parameters. However, relatively little work has gone into characterising the small pruned networks obtained, beyond a measure of their accuracy. In this paper, we use the sparse double descent approach to identify univocally and characterise pruned models associated with classification tasks. We observe empirically that, for a given task, iterative magnitude pruning (IMP) tends to converge to networks of comparable sizes even when starting from full networks with sizes ranging over orders of magnitude. We analyse the best pruned models in a controlled experimental setup and show that their number of parameters reflects task difficulty and that they are much better than full networks at capturing the true conditional probability distribution of the labels. On real data, we similarly observe that pruned models are less prone to overconfident predictions. Our results suggest that pruned models obtained via IMP not only have advantageous computational properties but also provide a better representation of uncertainty in learning.

Holographic MIMO (hMIMO) systems with a massive number of individually controlled antennas N make minimum mean square error (MMSE) channel estimation particularly challenging, due to its computational complexity that scales as $N^3$ . This paper investigates uniform linear arrays and proposes a low-complexity method based on the discrete Fourier transform (DFT) approximation, which follows from replacing the covariance matrix by a suitable circulant matrix. Numerical results show that, already for arrays with moderate size (in the order of tens of wavelengths), it achieves the same performance of the optimal MMSE, but with a significant lower computational load that scales as $N \log N$. Interestingly, the proposed method provides also increased robustness in case of imperfect knowledge of the covariance matrix., Comment: 5 pages,4 figures, Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, USA, Nov. 2023

Cell-Free massive MIMO networks provide huge power gains and resolve inter-cell interference by coherent processing over a massive number of distributed instead of co-located antennas in access points (APs). Cost-efficient hardware is preferred but imperfect local oscillators in both APs and users introduce multiplicative phase noise (PN), which affects the phase coherence between APs and users even with centralized processing. In this paper, we first formulate the system model of a PN-impaired uplink Cell-Free massive MIMO orthogonal frequency division multiplexing network, and then propose a PN-aware linear minimum mean square error channel estimator and derive a PN-impaired uplink spectral efficiency expression. Numerical results are used to quantify the spectral efficiency gain of the proposed channel estimator over alternative schemes for different receiving combiners., Comment: 6 pages; Submitted to IEEE GLOBECOM2023

Machine learning models are famously vulnerable to adversarial attacks: small ad-hoc perturbations of the data that can catastrophically alter the model predictions. While a large literature has studied the case of test-time attacks on pre-trained models, the important case of attacks in an online learning setting has received little attention so far. In this work, we use a control-theoretical perspective to study the scenario where an attacker may perturb data labels to manipulate the learning dynamics of an online learner. We perform a theoretical analysis of the problem in a teacher-student setup, considering different attack strategies, and obtaining analytical results for the steady state of simple linear learners. These results enable us to prove that a discontinuous transition in the learner's accuracy occurs when the attack strength exceeds a critical threshold. We then study empirically attacks on learners with complex architectures using real data, confirming the insights of our theoretical analysis. Our findings show that greedy attacks can be extremely efficient, especially when data stream in small batches., Comment: 19 pages, 10 figures