Search

Scaled-up quantum computers will require control interfaces capable of the manipulation and readout of large numbers of qubits, which usually operate at millikelvin temperatures. Advanced complementary metal–oxide–semiconductor (CMOS) technology is an attractive platform for delivering such interfaces. However, this approach is generally discounted due to its high power dissipation, which can lead to the heating of fragile qubits. Here we report a CMOS-based platform that can provide multiple electrical signals for the control of qubits at 100 mK. We demonstrate a chip that is configured by digital input signals at room temperature and uses on-chip circuit cells that are based on switched capacitors to generate static and dynamic voltages for the parallel control of qubits. We use our CMOS chip to bias a quantum dot device and to switch the conductance of a quantum dot via voltage pulses generated on the chip. Based on measurements from six cells, we determine the average power dissipation for generating control pulses of 100 mV to be 18 nW per cell. We estimate that a scaled-up system containing a thousand cells could be cooled by a commercially available dilution refrigerator. A platform based on complementary metal–oxide–semiconductor (CMOS) technology operating with qubits close to 100 mK can generate static and dynamic signals for the control of many qubits.

The spin-orbit interaction and spin-relaxation mechanisms of a shallow InAs quantum well heterostructure are investigated by magnetoconductance measurements as a function of an applied top-gate voltage. The data were fit using the Iordanskii--Lyanda-Geller--Pikus model and two distinct transport regimes were identified which correspond to the first and second sub-bands of the quantum well. The spin-orbit interaction splitting energy is extracted from the fits to the data, which also displays two distinct regimes. The different sub-band regimes exhibit different spin-scattering mechanisms, the identification of which, is of relevance for device platforms of reduced dimensionality which utilise the spin-orbit interaction., Comment: clearance and rights issues

We make use of a custom-designed cryo-CMOS multiplexer to enable multiple quantum devices to be characterized in a single cooldown of a dilution refrigerator. Combined with a packaging approach that integrates cryo-CMOS chips and a hot-swappable parallel-device test platform, we describe how this setup takes the standard wiring configuration of a dilution refrigerator as input and expands the capability for batch characterization of quantum devices at milli-Kelvin temperatures and high magnetic fields. The architecture of the cryo-CMOS multiplexer is discussed, and its performance is benchmarked using few-electron quantum dots and Hall mobility mapping measurements.

Incorporating ferromagnetic dopants into three-dimensional topological insulator thin films has recently led to the realisation of the quantum anomalous Hall effect. These materials are of great interest since they may support electrical currents that flow without resistance, even at zero magnetic field. To date, the quantum anomalous Hall effect has been investigated using low-frequency transport measurements. However, transport results can be difficult to interpret due to the presence of parallel conductive paths, or because additional non-chiral edge channels may exist. Here we move beyond transport measurements by probing the microwave response of a magnetised disk of Cr-(Bi,Sb)2Te3. We identify features associated with chiral edge plasmons, a signature that robust edge channels are intrinsic to this material system. Our results provide a measure of the velocity of edge excitations without contacting the sample, and pave the way for an on-chip circuit element of practical importance: the zero-field microwave circulator., Direct measurement of edge transport in the quantum anomalous Hall effect can be made difficult due to the presence of parallel conductive paths. Here, Mahoney et al. report features associated with chiral edge plasmons, a signature of robust edge states, by probing the zero-field microwave response of a magnetised disk of Cr-(Bi,Sb)2Te3.

Defining quantum dots in semiconductor based heterostructures is an essential step in initializing solid-state qubits. With growing device complexity and increasing number of functional devices required for measurements, a manual approach to finding suitable gate voltages to confine electrons electrostatically is impractical. Here, we implement a two-stage device characterization and dot-tuning process which first determines whether devices are functional and then attempts to tune the functional devices to the single or double quantum dot regime. We show that automating well established manual tuning procedures and replacing the experimenter's decisions by supervised machine learning is sufficient to tune double quantum dots in multiple devices without pre-measured input or manual intervention. The quality of measurement results and charge states are assessed by four binary classifiers trained with experimental data, reflecting real device behaviour. We compare and optimize eight models and different data preprocessing techniques for each of the classifiers to achieve reliable autonomous tuning, an essential step towards scalable quantum systems in quantum dot based qubit architectures.

We report the use of dispersive gate sensing (DGS) as a means of probing the charge environment of heterostructure-based qubit devices. The DGS technique, which detects small shifts in the quantum capacitance associated with single-electron tunnel events, is shown to be sensitive to pockets of charge in the potential-landscape likely under, and surrounding, the surface gates that define qubits and their readout sensors. Configuring a quantum point contact (QPC) as a localized emitter, we show how these charge pockets are activated by the relaxation of electrons tunneling through a barrier. The presence of charge pockets creates uncontrolled offsets in gate-bias and their thermal activation by on-chip tunnel currents suggests further sources of charge-noise that lead to decoherence in semiconductor qubits.

Radio-frequency (RF) reflectometry is implemented in hybrid semiconductor-superconductor nanowire systems designed to probe Majorana zero modes. Two approaches are presented. In the first, hybrid nanowire-based devices are part of a resonant circuit, allowing conductance to be measured as a function of several gate voltages ~40 times faster than using conventional low-frequency lock-in methods. In the second, nanowire devices are capacitively coupled to a nearby RF single-electron transistor made from a separate nanowire, allowing RF detection of charge, including charge-only measurement of the crossover from 2e inter-island charge transitions at zero magnetic field to 1e transitions at axial magnetic fields above 0.6 T, where a topological state is expected. Single-electron sensing yields signal-to-noise exceeding 3 and visibility 99.8% for a measurement time of 1 {\mu}s.

Candidate systems for topologically-protected qubits include two-dimensional electron gases (2DEGs) based on heterostructures exhibiting a strong spin–orbit interaction and superconductivity via the proximity effect. For InAs- or InSb-based materials, the need to form shallow quantum wells to create a hard-gapped p-wave superconducting state often subjects them to fabrication-induced damage, limiting their mobility. Here, we examine scattering mechanisms in processed InAs 2DEG quantum wells and demonstrate a means of increasing their mobility via repairing the semiconductor–dielectric interface. Passivation of charged impurity states with an argon–hydrogen plasma results in a significant increase in the measured mobility and reduction in its variance relative to untreated samples, up to 45 300 cm 2/(V s) in a 10 nm deep quantum well.

We demonstrate a scalable device architecture that facilitates indirect exchange between singlet-triplet spin qubits, mediated by an intermediate quantum state. The device comprises five quantum dots, which can be independently loaded and unloaded via tunneling to adjacent reservoirs, avoiding charge latch-up common in linear dot arrays. In a step towards realizing two-qubit entanglement based on indirect exchange, the architecture permits precise control over tunnel rates between the singlet-triplet qubits and the intermediate state. We show that by separating qubits by 1 um, the residual capacitive coupling between them is reduced to 7 ueV.

Circulators are non-reciprocal circuit elements integral to technologies including radar systems, microwave communication transceivers, and the readout of quantum information devices. Their non-reciprocity arises from the interference of microwaves over the centimetre-scale of the signal wavelength in the presence of bulky magnetic media that break time-reversal symmetry. Here we realize a completely passive on-chip microwave circulator with size one-thousandth the wavelength by exploiting the chiral, slow-light response of a 2-dimensional electron gas (2DEG) in the quantum Hall regime. For an integrated GaAs device with 330 um diameter and 1 GHz centre frequency, a non-reciprocity of 25 dB is observed over a 50 MHz bandwidth. Furthermore, the direction of circulation can be selected dynamically by varying the magnetic field, an aspect that may enable reconfigurable passive routing of microwave signals on-chip.

Solid-state qubits have recently advanced to the level that enables them, in-principle, to be scaled-up into fault-tolerant quantum computers. As these physical qubits continue to advance, meeting the challenge of realising a quantum machine will also require the engineering of new classical hardware and control architectures with complexity far beyond the systems used in today's few-qubit experiments. Here, we report a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm such as an error correcting code. We demonstrate the basic principles of this architecture in a configuration that distributes components of the control system across different temperature stages of a dilution refrigerator, as determined by the available cooling power. The combined setup includes a cryogenic field-programmable gate array (FPGA) controlling a switching matrix at 20 millikelvin which, in turn, manipulates a semiconductor qubit., 8 pages, 6 figures

We describe a cryogenic instrumentation platform incorporating commercially-available field-programmable gate arrays (FPGAs) configured to operate well beyond their specified temperature range. The instrument enables signal routing, multiplexing, and complex digital signal processing at temperatures approaching 4 kelvin and in close proximity to cooled devices or detectors within the cryostat. The cryogenic performance of the system is evaluated, including clock speed, error rates, and power consumption. Although constructed for the purpose of controlling and reading out quantum computing devices with low latency, the instrument is generic enough to be of broad use in a range of cryogenic applications.

Gate-tunable junctions are key elements in quantum devices based on hybrid semiconductor-superconductor materials. They serve multiple purposes ranging from tunnel spectroscopy probes to voltage-controlled qubit operations in gatemon and topological qubits. Common to all is that junction transparency plays a critical role. In this study, we grow single-crystalline InAs, InSb, and InAs1-xSbx semiconductor nanowires with epitaxial Al, Sn, and Pb superconductors and in situ shadowed junctions in a single-step molecular beam epitaxy process. We investigate correlations between fabrication parameters, junction morphologies, and electronic transport properties of the junctions and show that the examined in situ shadowed junctions are of significantly higher quality than the etched junctions. By varying the edge sharpness of the shadow junctions, we show that the sharpest edges yield the highest junction transparency for all three examined semiconductors. Further, critical supercurrent measurements reveal an extraordinarily high ICRN, close to the KO-2 limit. This study demonstrates a promising engineering path toward reliable gate-tunable superconducting qubits.