Search

Compound parabolic concentrator (CPC) targets are utilized at the National Ignition Facility Advanced Radiographic Capability (NIF-ARC) laser to enhance the acceleration of electrons and production of high energy photons, for laser durations of 10 ps and energies up to 2.4 kJ. A large enhancement of mean electron energy (>2 ×) and photon brightness (>10×) is found with CPC targets compared to flat targets. Using multiple diagnostic techniques at different spatial locations and scaling by gold activation spatial data, photon spectra are characterized for [Formula: see text] MeV. Beam width and pointing variations are given. The efficient production of MeV photons at [Formula: see text] W/cm2 with CPCs is observed, with doses of >10 rad in air at 1 m for [Formula: see text] MeV; these exceed those previously reported with laser-driven sources. Using this source, sub-mm resolution radiographs are generated through large areal density radiograph objects. These results are promising for the development of bright MeV x-ray and particle sources on Petawatt class laser systems.

The advanced radiographic capability (ARC) laser system, part of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory, is a short-pulse laser capability integrated into the NIF. The ARC is designed to provide adjustable pulse lengths of ∼ 1 − 38 p s in four independent beamlets, each with energies up to 1 kJ (depending on pulse duration). A detailed model of the ARC lasers has been developed that predicts the time- and space-resolved focal spots on target for each shot. Measurements made to characterize static and dynamic wavefront characteristics of the ARC are important inputs to the code. Modeling has been validated with measurements of the time-integrated focal spot at the target chamber center (TCC) at low power, and the space-integrated pulse duration at high power, using currently available diagnostics. These simulations indicate that each of the four ARC beamlets achieves a peak intensity on target of up to a few 10 18 W / c m 2 .

The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory contains a 192-beam 4.2 MJ neodymium glass laser (around 1053 nm or 1w) that is frequency converted to 351nm light or 3w. It has been designed to support the study of Inertial Confinement Fusion (ICF) and High Energy Density Physics (HEDP). The NIF Precision Diagnostic System (PDS) was reactivated and new diagnostic packages were designed and fielded that offer a more comprehensive suite of high-resolution measurements. The current NIF laser performance will be presented as well as the preliminary results obtained with the various laser experimental campaigns using the new diagnostic tool suites.

The implosion efficiency in inertial confinement fusion depends on the degree of stagnated fuel compression, density uniformity, sphericity, and minimum residual kinetic energy achieved. Compton scattering-mediated 50-200 keV x-ray radiographs of indirect-drive cryogenic implosions at the National Ignition Facility capture the dynamic evolution of the fuel as it goes through peak compression, revealing low-mode 3D nonuniformities and thicker fuel with lower peak density than simulated. By differencing two radiographs taken at different times during the same implosion, we also measure the residual kinetic energy not transferred to the hot spot and quantify its impact on the implosion performance.

Relativistic electron temperatures were measured from kilojoule, subrelativistic laser-plasma interactions. Experiments show an order of magnitude higher temperatures than expected from a ponderomotive scaling, where temperatures of up to 2.2 MeV were generated using an intensity of 1×10^{18}W/cm^{2}. Two-dimensional particle-in-cell simulations suggest that electrons gain superponderomotive energies by stochastic acceleration as they sample a large area of rapidly changing laser phase. We demonstrate that such high temperatures are possible from subrelativistic intensities by using lasers with long pulse durations and large spatial scales.

ARC is a kilojoule petawatt-class laser system which generates high energy x-ray and particle sources for radiography of experiments on the National Ignition Facility. We present recent progress on laser performance measurements and system modeling.

New short-pulse kilojoule, Petawatt-class lasers, which have recently come online and are coupled to large-scale, many-beam long-pulse facilities, undoubtedly serve as very exciting tools to capture transformational science opportunities in high energy density physics. These short-pulse lasers also happen to reside in a unique laser regime: very high-energy (kilojoule), relatively long (multi-picosecond) pulse-lengths, and large (10s of micron) focal spots, where their use in driving energetic particle beams is largely unexplored. Proton acceleration via Target Normal Sheath Acceleration (TNSA) using the Advanced Radiographic Capability (ARC) short-pulse laser at the National Ignition Facility in the Lawrence Livermore National Laboratory is demonstrated for the first time, and protons of up to 18 MeV are measured using laser irradiation of >1 ps pulse-lengths and quasi-relativistic (∼1018 W/cm2) intensities. This is indicative of a super-ponderomotive electron acceleration mechanism that sustains acceleration over long (multi-picosecond) time-scales and allows for proton energies to be achieved far beyond what the well-established scalings of proton acceleration via TNSA would predict at these modest intensities. Furthermore, the characteristics of the ARC laser (large ∼100 μm diameter focal spot, flat spatial profile, multi-picosecond, relatively low prepulse) provide acceleration conditions that allow for the investigation of 1D-like particle acceleration. A high flux ∼ 50 J of laser-accelerated protons is experimentally demonstrated. A new capability in multi-picosecond particle-in-cell simulation is applied to model the data, corroborating the high proton energies and elucidating the physics of multi-picosecond particle acceleration.

The advanced radiographic capability located at the National Ignition Facility (NIF) uses high intensity, short pulse lasers to create bright photon sources for diagnosing high energy density experiments. There are radiographic needs for a multi-frame time-resolved MeV gamma diagnostic for experiments on the NIF with sub-nanosecond resolution. A series of experiments demonstrated measurements of MeV x-ray spectra resolved with a time separation of a few nanoseconds through the use of gas Cherenkov detectors. A two-pulse radiographic experiment found a 30% reduction in > 2.8 MeV photon flux compared to the first frame exposure.

New control techniques are required to utilize the full potential of next generation high-energy high-repetition-rate pulses lasers while ensuring their safe operation. During automated optimization of an experiment, the control system is required to identify and reject unsafe laser configurations proposed by the optimizer. Using conventional physics codes render impossible when applied to a high energy laser system with 1ms or less time between shots, and also including laser fluctuations and drift. To mitigate this, we are using a deep Bayesian neural network to map the laser’s input power spectrum to its output power spectrum and demonstrate the speed of this approach. The Bayesian neural network can provide an estimate of its own uncertainty as a function of wavelength. A recently developed algorithm enables the uncertainty to be calculated inexpensively using multiple dropout layers inserted into the model. The uncertainty estimates are used by an active learning algorithm to improve the accuracy of the model and intelligently explore the input domain.

We have developed a high-efficiency (∼90%), broad-bandwidth low-absorption pulse compressor suitable for high energy pulses. This technology is a significant step in enabling high peak power laser systems to operate at high repetition rates.

A laser system made of two beams of 10 PW each has been designed and is currently built for ELI-NP research infrastructure. Design is presented as well as preliminary results up to the 1PW level amplifier.

Le semi-conducteur II-VI, ZnSe, dope au Cr 2+ presente une emission laser dans le moyen infrarouge entre 2 et 3μm a 300K. Une accordabilite en longueur d'onde entre 2.2 et 2.62μm a deja ete observee. L'interet des polycristaux de ZnSe en tant que materiau hote pour le Cr 2+ est non negligeable en terme de cout et de dimension comparativement aux monocristaux. L'etude des deux types de matrice a permis de quantifier les pertes et les efficacites laser. En regime de commutation de gain, le polycristal presente une efficacite optique-optique de 28% contre 33% pour un monocristal de Cr 2+ : ZnSe.

Summary form only given. Laser action of transition-metal-doped zinc chalcogenide (Cr/sup 2+/:ZnSe, Cr/sup 2+/:ZnS) were previously demonstrated in the mid infrared with a large tunability according to their broadband emission spectrum. Whereas previous results were obtained with single-crystals, we report laser action with home-doped Cr/sup 2+/:ZnSe polycrystal materials using a diffusion method. In our experiment, the pumping wavelength at 18 /spl mu/m was obtained using an LiNbO/sub 3/ OPO (optical parametric oscillator) pumped at 1064 /spl mu/m.

Infrared detectors were implemented on InAs self-assembled quantum dots fabricated using Stranski–Krastanov growth mode on InAlAs matrix, lattice matched to InP (0 0 1) substrates. These dots grow with a shape of small elongated boxes, with their long axis along the [ 1 1 0] direction, and with a high concentration of 7×10 10 cm −2 . Photoconductive measurements were performed in all three polarizations. Rich spectra in the range of 50–500 meV, with different polarization selection rules were observed. The bias dependence of peak intensity of the intraband transitions serves as an additional tool to identify their origin. Some of the peaks, which increase linearly with bias, are attributed to bound-to-continuum transitions. Others, which appear only at larger biases, and increase superlinearly, are due to bound-to-bound transitions. The magnitude of detector responsivity at normal-incidence is similar to that obtained for polarization normal to the layers, and is comparable to that achieved in QWIPs. BLIP conditions prevail at 77 K for integral photocurrent response at F#1. The effect of unintentional doping is discussed. It is shown that this doping can be destructive for detector operation unless the density of dots is large.