Search

Abstract  The electrical performances and the optical response of a superconducting hotspot air-bridge bolometer (SHAB) coupled through a planar antenna to Terahertz waves and operating in vacuum at about 4.2 K, have been measured. The SHAB consists of a narrow Nb air bridge, voltage biased to form, in the middle of the suspended Nb stripe, a resistive hotspot, whose volume is modulated by the incoming radiation. The signal resulting from the coupled optical power and the device noise performance have been measured by using a home made transimpedance amplifier operating at room temperature, resulting in an electrical NEP of about 40 fW/Hz1/2. Passive detection of the 300 K blackbody radiation at frequency lower than 1.6 THz, band limited by a low-pass optical filters, has been successfully carried out by using a SHAB. [ABSTRACT FROM AUTHOR]

Transition-edge sensor (TES) microcalorimeters are advanced cryogenic detectors that use a superconducting film for particle or photon detection. We are establishing a new production line for TES detectors to serve as cryogenic anticoincidence (i.e., veto) devices. These detectors are made with a superconducting bilayer of titanium (Ti) and gold (Au) thin films deposited via electron beam evaporation in a high vacuum condition on a monocrystalline silicon substrate. In this work, we report on the development of such sensors, aiming to achieve stable sensing performance despite the effects of aging. For this purpose, patterned and non-patterned Ti/Au bilayer samples with varying geometries and thicknesses were fabricated using microfabrication technology. To characterize the detectors, we present and discuss initial results from repeated resistance-temperature (R-T) measurements over time, conducted on different samples, thereby augmenting existing literature data. Additionally, we present a discussion of the sensor's degradation over time due to aging effects and test a potential remedy based on an easy annealing procedure. In our opinion, this work establishes the groundwork for our new TES detector production line.

Quantum cascade lasers (QCLs) constitute an intriguing opportunity for the generation of on-chip optical dissipative Kerr solitons (DKSs). Originally demonstrated in passive microresonators, DKSs were recently observed in mid-infrared ring QCL paving the way for their achievement even at longer wavelengths. To this end, we realized defect-free terahertz ring QCLs featuring anomalous dispersion leveraging on a technological platform based on waveguide planarization. A concentric coupled waveguide approach is implemented for dispersion compensation, while a passive broadband bullseye antenna improves the device power extraction and far field. Comb spectra featuring sech 2 envelopes are presented for free-running operation. The presence of solitons is further supported by observing the highly hysteretic behavior, measuring the phase difference between the modes, and reconstructing the intensity time profile highlighting the presence of self-starting 12-picosecond-long pulses. These observations are in very good agreement with our numeric simulations based on a Complex Ginzburg-Landau Equation (CGLE).

We study the performance of a hot-electron bolometer (HEB) operating at THz frequencies based on superconducting niobium nitride films. We report on the voltage response of the detector over a large electrical detection bandwidth carried out with different THz sources. We show that the impulse response of the fully packaged HEB at 7.5 K has a 3 dB cutoff around 2 GHz. Remarkably, detection capability is still observed above 30 GHz in an heterodyne beating experiment using a THz quantum cascade laser frequency comb. Additionally, the HEB sensitivity has been evaluated and an optical noise equivalent power NEP of 0.8 pW/√ H z has been measured at 1 MHz.

Recently, there has been a growing interest in integrated THz photonics for various applications in communications, spectroscopy and sensing. We present a new integrated photonic platform based on active and passive elements integrated in a double-metal, high-confinement waveguide layout planarized with a low-loss polymer. An extended top metallization keeps waveguide losses low while improving dispersion, thermal and RF properties, as it enables to decouple the design of THz and microwave cavities. Free-running on-chip quantum cascade laser combs spanning 800 GHz, harmonic states with over 1.1 THz bandwidth and RF-injected broadband incoherent states spanning over nearly 1.6 THz are observed using a homogeneous quantum-cascade active core. With a strong external RF drive, actively mode-locked pulses as short as 4.4 ps can be produced, as measured by SWIFTS. We demonstrate as well passive waveguides with low insertion loss, enabling the tuning of the laser cavity boundary conditions and the co-integration of active and passive elements on the same THz photonic chip., (© 2022. The Author(s).)

Background: Neurofibromatosis type 1 (NF1) is a neurocutaneous syndrome, due to heterozygous pathogenic variants in NF1 gene. The main clinical manifestations are multiple café au lait spots, axillary and inguinal freckling, cutaneous and plexiform neurofibromas, optic glioma, Lisch nodules and osseous lesions, such as sphenoid and tibial dysplasia. Vasculopathy is another feature of NF1; it consists of stenosis, aneurysms, and arteriovenous malformations, frequently involving renal arteries., Case Presentation: We report on a 9-year-old girl with a novel mutation in NF1 gene and renal artery aneurysm, treated by coil embolization and complicated with hypertension., Conclusion: Vasculopathy is a complication of NF1, affecting from 0.4 to 6.4% of patients with NF1. Among the vascular abnormalities, renal artery aneurysm is a rare manifestation, with only a few cases regarding adult patients and no pediatric reports described in current literature. The finding of a vascular abnormality in a specific site requires the evaluation of the entire vascular system because multiple vessels could be involved at the same time., (© 2022. The Author(s).)

The growing need for new and reliable surface sensing methods is arousing interest in the electromagnetic excitations of ultrathin films, i.e., to generate electromagnetic field distributions that resonantly interact with the most significant quasi-particles of condensed matter. In such a context, Bloch surface waves turned out to be a valid alternative to surface plasmon polaritons to implement high-sensitivity sensors in the visible spectral range. Only in the last few years, however, has their use been extended to infrared wavelengths, which represent a powerful tool for detecting and recognizing molecular species and crystalline structures. In this work, we demonstrate, by means of high-resolution reflectivity measurements, that a one-dimensional photonic crystal can sustain Bloch surface waves in the infrared spectral range from room temperature down to 10 K. To the best of our knowledge, this is the first demonstration of infrared Bloch surface waves at cryogenic temperatures. Furthermore, by exploiting the enhancement of the surface state and the high brilliance of infrared synchrotron radiation, we demonstrate that the proposed BSW-based sensor has a sensitivity on the order of 2.9 cm -1 for each nanometer-thick ice layer grown on its surface below 150 K. In conclusion, we believe that Bloch surface wave-based sensors are a valid new class of surface mode-based sensors for applications in materials science.

The development of performant integrated detectors, which are sensitive to quantum fluctuations of coherent light, are strongly desired to realize a scalable and determinist photonic quantum processor based on continuous variables states of light. Here, we investigate the performance of hot electron bolometers (HEBs) fabricated on top of a silicon-on-insulator (SOI) photonic circuit showing responsivities up to 8600 V/W and a record noise equivalent temperature of 1.1 dB above the quantum limit. Thanks to a detailed analysis of the noise sources of the waveguide integrated HEB, we estimate 14.8 dBV clearance between the shot noise and electrical noise with just 1.1µW of local oscillator power. The full technology compatibility with superconducting nanowire single photon detectors (SNSPDs) opens the possibility of nonclassical state engineering and state tomography performed within the same platform, enabling a new class of optical quantum processors.

The many fundamental roto-vibrational resonances of chemical compounds result in strong absorption lines in the mid-infrared region (λ ∼ 2-20 μm). For this reason, mid-infrared spectroscopy plays a key role in label-free sensing, in particular, for chemical recognition, but often lacks the required sensitivity to probe small numbers of molecules. In this work, we propose a vibrational sensing scheme based on Bloch surface waves (BSWs) on 1D photonic crystals to increase the sensitivity of mid-infrared sensors. We report on the design and deposition of CaF 2 /ZnS 1D photonic crystals. Moreover, we theoretically and experimentally demonstrate the possibility to sustain narrow σ-polarized BSW modes together with broader π-polarized modes in the range of 3-8 μm by means of a customized Fourier transform infrared spectroscopy setup. The multilayer stacks are deposited directly on CaF 2 prisms, reducing the number of unnecessary interfaces when exciting in the Kretschmann-Raether configuration. Finally, we compare the performance of mid-IR sensors based on surface plasmon polaritons with the BSW-based sensor. The figures of merit found for BSWs in terms of confinement of the electromagnetic field and propagation length puts them as forefrontrunners for label-free and polarization-dependent sensing devices., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

The ESA-JAXA BepiColombo mission to Mercury will provide simultaneous measurements from two spacecraft, offering an unprecedented opportunity to investigate magnetospheric and exospheric particle dynamics at Mercury as well as their interactions with solar wind, solar radiation, and interplanetary dust. The particle instrument suite SERENA (Search for Exospheric Refilling and Emitted Natural Abundances) is flying in space on-board the BepiColombo Mercury Planetary Orbiter (MPO) and is the only instrument for ion and neutral particle detection aboard the MPO. It comprises four independent sensors: ELENA for neutral particle flow detection, Strofio for neutral gas detection, PICAM for planetary ions observations, and MIPA, mostly for solar wind ion measurements. SERENA is managed by a System Control Unit located inside the ELENA box. In the present paper the scientific goals of this suite are described, and then the four units are detailed, as well as their major features and calibration results. Finally, the SERENA operational activities are shown during the orbital path around Mercury, with also some reference to the activities planned during the long cruise phase., (© The Author(s) 2021.)

NbN-based detectors can detect light from the granular regime (single or few photons) up to weak continuous photon fluxes at wavelengths ranging from visible light up to mid-IR. The article reports our recent results on a novel linear detector, the waveguide-integrated hot electron bolometer (HEB) capable to measure photon fluxes of large coherent beams in a regime in which superconducting nanowire single photon detectors (SNSPDs) are not efficient due to their strong nonlinearity. SNSPDs, photon number resolving detectors and amplitude multiplexing readout schemes, all integrated on photonic circuits are also discussed in the paper. The compatibility of the integrated HEB detectors with the SNSPDs technology can allow the characterization of complex non classical states of light within the same chip., (© 2020 IOP Publishing Ltd.)

Ultrastrong light-matter coupling allows the exploration of new states of matter through the interaction of strong vacuum fields with huge electronic dipoles. By using hybrid dipole antenna-split ring resonator-based cavities with extremely small effective mode volumes V eff /λ 0 3 and surfaces S -10 and surfaces S eff /λ 0 2 ≃ 3.5 × 10 -7 , we probe the ultrastrong light-matter coupling at 300 GHz to less than 100 electrons located in the last occupied Landau level of a high mobility two-dimensional electron gas, measuring a normalized coupling ratio of Ω R /ω c = 0.36. Effects of the extremely reduced cavity dimensions are observed as the light-matter coupled system is better described by an effective mass heavier than the uncoupled one. These results open the way to ultrastrong coupling at the single-electron level in two-dimensional electron systems.