Search

We present a high angular resolution ($\sim1"$) and wide-field ($2'.9 \times 1'.9$) image of the 1.3-mm continuum, CO($J$ = 2--1) line, and SiO($J$ = 5--4) line emissions toward an embedded protocluster, FIR3, FIR4, and FIR5, in the Orion Molecular Cloud 2 obtained from the Atacama Large Millimeter/submillimeter Array (ALMA). We identify 51 continuum sources, 36 of which are newly identified in this study. Their dust masses, projected sizes, and $\mathrm{H_2}$ gas number densities are estimated to be $3.8 \times 10^{-5}$--$ 1.1 \times 10^{-2} \mathrm{M_{\odot}}$, 290--2000 au, and $6.4 \times 10^{6}$--$3.3 \times 10^{8}\,\mathrm{cm^{-3}}$, respectively. The results of a Jeans analysis show that $\sim80\,\%$ of the protostellar sources and $\sim15\,\%$ of the prestellar sources are gravitationally bound. We identify 12 molecular outflows traced in the CO($J$ = 2--1) emission, six of which are newly detected. We spatially resolve shocked gas structures traced by the SiO($J$ = 5--4) emission in this region for the first time. We identify shocked gas originating from outflows and other shocked regions. These results provide direct evidence of an interaction between a dust condensation, FIR4, and an energetic outflow driven by HOPS-370 located within FIR3. A comparison of the outflow dynamical timescales, fragmentation timescales, and protostellar ages shows that the previously proposed triggered star-formation scenario in FIR4 is not strongly supported. We also discuss the spatial distribution of filaments identified in our continuum image by comparing it with a previously identified hub-fiber system in the $\mathrm{N_2H^+}$ line., 45 pages, 24 figures, 2 figure sets, 2 animations, Accepted for publication in ApJ

The evolution of molecular clouds in galactic centres is thought to differ from that in galactic discs due to a significant influence of the external gravitational potential. We present a set of numerical simulations of molecular clouds orbiting on the 100-pc stream of the Central Molecular Zone (the central $\sim500$ pc of the Galaxy) and characterise their morphological and kinematic evolution in response to the background potential and eccentric orbital motion. We find that the clouds are shaped by strong shear and torques, by tidal and geometric deformation, and by their passage through the orbital pericentre. Within our simulations, these mechanisms control cloud sizes, aspect ratios, position angles, filamentary structure, column densities, velocity dispersions, line-of-sight velocity gradients, spin angular momenta, and kinematic complexity. By comparing these predictions to observations of clouds on the Galactic Centre 'dust ridge', we find that our simulations naturally reproduce a broad range of key observed morphological and kinematic features, which can be explained in terms of well-understood physical mechanisms. We argue that the accretion of gas clouds onto the central regions of galaxies, where the rotation curve turns over and the tidal field is fully compressive, is accompanied by transformative dynamical changes to the clouds, leading to collapse and star formation. This can generate an evolutionary progression of cloud collapse with a common starting point, which either marks the time of accretion onto the tidally-compressive region or of the most recent pericentre passage. Together, these processes may naturally produce the synchronised starbursts observed in numerous (extra)galactic nuclei., Comment: 21 pages, 8 figures, 3 tables; accepted by MNRAS (February 5, 2019); Figures 2, 3, and 4 show the main results of the paper. An animated version of Figure 2 is available as an ancillary file in the arXiv source and will be included as online Supporting Information with the MNRAS publication

We present the first results from a CARMA high-resolution $^{12}$CO(1-0), $^{13}$CO(1-0), and C$^{18}$O(1-0) molecular line survey of the North America and Pelican (NAP) Nebulae. CARMA observations have been combined with single-dish data from the Purple Mountain 13.7m telescope to add short spacings and produce high-dynamic-range images. We find that the molecular gas is predominantly shaped by the W80 HII bubble that is driven by an O star. Several bright rims are probably remnant molecular clouds heated and stripped by the massive star. Matching these rims in molecular lines and optical images, we construct a model of the three-dimensional structure of the NAP complex. Two groups of molecular clumps/filaments are on the near side of the bubble, one being pushed toward us, whereas the other is moving toward the bubble. Another group is on the far side of the bubble and moving away. The young stellar objects in the Gulf region reside in three different clusters, each hosted by a cloud from one of the three molecular clump groups. Although all gas content in the NAP is impacted by feedback from the central O star, some regions show no signs of star formation, while other areas clearly exhibit star formation activity. Other molecular gas being carved by feedback includes the cometary structures in the Pelican Head region and the boomerang features at the boundary of the Gulf region. The results show that the NAP complex is an ideal place for the study of feedback effects on star formation., accepted by AJ

Context: The formation of high-mass star-forming regions from their parental gas cloud and the subsequent fragmentation processes lie at the heart of star formation research. Aims: We aim to study the dynamical and fragmentation properties at very early evolutionary stages of high-mass star formation. Methods: Employing the NOrthern Extended Millimeter Array (NOEMA) and the IRAM 30m telescope, we observed two young high-mass star-forming regions, ISOSS22478 and ISOSS23053, in the 1.3mm continuum and spectral line emission at a high angular resolution (~0.8''). Results: We resolved 29 cores that are mostly located along filament-like structures. Depending on the temperature assumption, these cores follow a mass-size relation of approximately M~r^2.0, corresponding to constant mean column densities. However, with different temperature assumptions, a steeper mass-size relation up to M~r^3.0, which would be more likely to correspond to constant mean volume densities, cannot be ruled out. The correlation of the core masses with their nearest neighbor separations is consistent with thermal Jeans fragmentation. We found hardly any core separations at the spatial resolution limit, indicating that the data resolve the large-scale fragmentation well. Although the kinematics of the two regions appear very different at first sight - multiple velocity components along filaments in ISOSS22478 versus a steep velocity gradient of more than 50km/s/pc in ISOSS23053 - the findings can be explained within the framework of a dynamical cloud collapse scenario. Conclusions: While our data are consistent with a dynamical cloud collapse scenario and subsequent thermal Jeans fragmentation, the importance of additional environmental properties, such as the magnetization of the gas or external shocks triggering converging gas flows, is nonetheless not as well constrained and would require future investigation., Comment: 16 pages, 16 figures, accepted for Astronomy and Astrophysics, a higher-resolution version can also be found at https://www.mpia.de/homes/beuther/papers.html

The SEDIGISM (Structure, Excitation and Dynamics of the Inner Galactic Interstellar Medium) survey used the APEX telescope to map 84 deg^2 of the Galactic plane between l = -60 deg and l = +31 deg in several molecular transitions, including 13CO(2-1) and C18O(2-1), thus probing the moderately dense (~10^3 cm^-3) component of the interstellar medium. With an angular resolution of 30'' and a typical 1-sigma sensitivity of 0.8-1.0 K at 0.25 km/s velocity resolution, it gives access to a wide range of structures, from individual star-forming clumps to giant molecular clouds and complexes. The coverage includes a good fraction of the first and fourth Galactic quadrants, allowing us to constrain the large scale distribution of cold molecular gas in the inner Galaxy. In this paper we provide an updated overview of the full survey and the data reduction procedures used. We also assess the quality of these data and describe the data products that are being made publicly available as part of this first data release (DR1). We present integrated maps and position-velocity maps of the molecular gas and use these to investigate the correlation between the molecular gas and the large scale structural features of the Milky Way such as the spiral arms, Galactic bar and Galactic centre. We find that approximately 60 per cent of the molecular gas is associated with the spiral arms and these appear as strong intensity peaks in the derived Galactocentric distribution. We also find strong peaks in intensity at specific longitudes that correspond to the Galactic centre and well known star forming complexes, revealing that the 13CO emission is concentrated in a small number of complexes rather than evenly distributed along spiral arms., MNRAS, in press

We use the 13CO(2-1) emission from the SEDIGISM high-resolution spectral-line survey of the inner Galaxy, to extract the molecular cloud population with a large dynamic range in spatial scales, using the SCIMES algorithm. This work compiles a cloud catalogue with a total of 10663 molecular clouds, 10300 of which we were able to assign distances and compute physical properties. We study some of the global properties of clouds using a science sample, consisting of 6664 well resolved sources and for which the distance estimates are reliable. In particular, we compare the scaling relations retrieved from SEDIGISM to those of other surveys, and we explore the properties of clouds with and without high-mass star formation. Our results suggest that there is no single global property of a cloud that determines its ability to form massive stars, although we find combined trends of increasing mass, size, surface density and velocity dispersion for the sub-sample of clouds with ongoing high-mass star formation. We then isolate the most extreme clouds in the SEDIGISM sample (i.e. clouds in the tails of the distributions) to look at their overall Galactic distribution, in search for hints of environmental effects. We find that, for most properties, the Galactic distribution of the most extreme clouds is only marginally different to that of the global cloud population. The Galactic distribution of the largest clouds, the turbulent clouds and the high-mass star-forming clouds are those that deviate most significantly from the global cloud population. We also find that the least dynamically active clouds (with low velocity dispersion or low virial parameter) are situated further afield, mostly in the least populated areas. However, we suspect that part of these trends may be affected by some observational biases, and thus require further follow up work in order to be confirmed., 25 pages (+ appendices, 15 pages), 26 figures, MNRAS

A unique filament is identified in the {\it Herschel} maps of the Orion A giant molecular cloud. The filament, which, we name the Stick, is ruler-straight and at an early evolutionary stage. Transverse position-velocity diagrams show two velocity components closing in on the Stick. The filament shows consecutive rings/forks in C$^{18}$O(1-0) channel maps, which is reminiscent of structures generated by magnetic reconnection. We propose that the Stick formed via collision-induced magnetic reconnection (CMR). We use the magnetohydrodynamics (MHD) code Athena++ to simulate the collision between two diffuse molecular clumps, each carrying an anti-parallel magnetic field. The clump collision produces a narrow, straight, dense filament with a factor of $>$200 increase in density. The production of the dense gas is seven times faster than free-fall collapse. The dense filament shows ring/fork-like structures in radiative transfer maps. Cores in the filament are confined by surface magnetic pressure. CMR can be an important dense-gas-producing mechanism in the Galaxy and beyond., 39 pages, 31 figures, 2 tables, accepted by ApJ

The gas kinetic temperature (TK) determines the physical and chemical evolution of the interstellar medium (ISM). This work explores the use of HCN/HNC (J=1–0) line ratio as new probe of the gas kinetic temperature in the molecular ISM. Based on a new set of IRAM-30m observations at 30 arcsec resolution towards Orion Nebula Cluster, we find a two-part linear correlation of the observed HCN/HNC line ratio and TK. This empirical calibration allows to obtain direct estimates of the TK values across a wide range of column densities (AV ≳ 5 mag) and up to scales of ~ 10 pc. Comparisons with additional studies highlight the potential use of the HCN/HNC line ratio as novel chemical thermometer at 3mm.

Molecular-line observations of filaments in star-forming regions have revealed the existence of elongated coherent features within the filaments; these features are termed fibres. Here we caution that, since fibres are traced in PPV space, there is no guarantee that they represent coherent features in PPP space. We illustrate this contention using simulations of the growth of a filament from a turbulent medium. Synthetic C$^{18}$O observations of the simulated filaments reveal the existence of fibres very similar to the observed ones, i.e. elongated coherent features in the resulting PPV data-cubes. Analysis of the PPP data-cubes (i.e. 3D density fields) also reveals elongated coherent features, which we term sub-filaments. Unfortunately there is very poor correspondence between the fibres and the sub-filaments in the simulations. Both fibres and sub-filaments derive from inhomogeneities in the turbulent accretion flow onto the main filament. As a consequence, fibres are often affected by line-of-sight confusion. Similarly, sub-filaments are often affected by large velocity gradients, and even velocity discontinuities. These results suggest that extreme care should be taken when using velocity coherent features to constrain the underlying substructure within a filament., 15 pages + appendices, 26 figures. Accepted to MNRAS

16 pags., 9 figs., 1 tab., Massive stars inject mechanical and radiative energy into the surrounding environment, which stirs it up, heats the gas, produces cloud and intercloud phases in the interstellar medium, and disrupts molecular clouds (the birth sites of new stars). Stellar winds, supernova explosions and ionization by ultraviolet photons control the lifetimes of molecular clouds. Theoretical studies predict that momentum injection by radiation should dominate that by stellar winds, but this has been difficult to assess observationally. Velocity-resolved large-scale images in the fine-structure line of ionized carbon ([C ii]) provide an observational diagnostic for the radiative energy input and the dynamics of the interstellar medium around massive stars. Here we report observations of a one-square-degree region (about 7 parsecs in diameter) of Orion molecular core 1—the region nearest to Earth that exhibits massive-star formation—at a resolution of 16 arcseconds (0.03 parsecs) in the [C ii] line at 1.9 terahertz (158 micrometres). The results reveal that the stellar wind originating from the massive star θ Orionis C has swept up the surrounding material to create a ‘bubble’ roughly four parsecs in diameter with a 2,600-solar-mass shell, which is expanding at 13 kilometres per second. This finding demonstrates that the mechanical energy from the stellar wind is converted very efficiently into kinetic energy of the shell and causes more disruption of the Orion molecular core 1 than do photo-ionization and evaporation or future supernova explosions., We acknowledge the work during the upGREAT squaredegree survey of Orion of the USRA and NASA staff of the Armstrong Flight Research Center in Palmdale and of the Ames Research Center in Mountain View, and the Deutsches SOFIA Institut. Research on the interstellar medium at Leiden Observatory is supported through a Spinoza award. We thank the ERC and the Spanish MCIU for funding support under grants ERC-2013-Syg 610256 Universities Space Research Association-NANOCOSMOS and AYA2017-85111-P, respectively.

We present an initial overview of the filamentary structure in the Orion A molecular cloud utilizing a high angular and velocity resolution C$^{18}$O(1-0) emission map that was recently produced as part of the CARMA-NRO Orion Survey. The main goal of this study is to build a credible method to study varying widths of filaments which has previously been linked to star formation in molecular clouds. Due to the diverse star forming activities taking place throughout its $\sim$20 pc length, together with its proximity of 388 pc, the Orion A molecular cloud provides an excellent laboratory for such an experiment to be carried out with high resolution and high sensitivity. Using the widely-known structure identification algorithm, DisPerSE, on a 3-dimensional (PPV) C$^{18}$O cube, we identified 625 relatively short (the longest being 1.74 pc) filaments over the entire cloud. We study the distribution of filament widths using FilChaP, a python package that we have developed and made publicly available. We find that the filaments identified in a 2 square degree PPV cube do not overlap spatially, except for the complex OMC-4 region that shows distinct velocity components along the line of sight. The filament widths vary between 0.02 and 0.3 pc depending on the amount of substructure that a filament possesses. The more substructure a filament has, the larger is its width. We also find that despite this variation, the filament width shows no anticorrelation with the central column density which is in agreement with previous Herschel observations., Comment: 19 pages, 20 figures. Accepted for publication in Astronomy and Astrophysics

We have investigated the formation and kinematics of sub-mm continuum cores in the Orion A molecular cloud. A comparison between sub-mm continuum and near infrared extinction shows a continuum core detection threshold of $A_V\sim$ 5-10 mag. The threshold is similar to the star formation extinction threshold of $A_V\sim$ 7 mag proposed by recent work, suggesting a universal star formation extinction threshold among clouds within 500 pc to the Sun. A comparison between the Orion A cloud and a massive infrared dark cloud G28.37+0.07 indicates that Orion A produces more dense gas within the extinction range 15 mag $\lesssim A_V \lesssim$ 60 mag. Using data from the CARMA-NRO Orion Survey, we find that dense cores in the integral-shaped filament (ISF) show sub-sonic core-to-envelope velocity dispersion that is significantly less than the local envelope line dispersion, similar to what has been found in nearby clouds. Dynamical analysis indicates that the cores are bound to the ISF. An oscillatory core-to-envelope motion is detected along the ISF. Its origin is to be further explored., 21 pages, 11 figures, accepted by ApJ, comments welcome shuo.kong@yale.edu

With this research note, we are releasing the CARMA-NRO Orion Survey data first presented in Kong et al., enhanced with additional coverage of the L1641-C region to the south of the integral-shaped filament. We are including position–position–velocity cubes for the molecular lines 12CO(1–0), 13CO(1–0), and C18O(1–0). The original paper includes details of the data reduction and final sensitivity. The mapped region now spans about 2.°5 along the Orion A cloud in the north–south direction, providing an unprecedented overview of the extended molecular gas. The associated data cubes are publicly available on the Harvard Dataverse 10.7910/DVN/6Q26PN (Version 3). Kong et al. and this research note should be cited when using these data.

We present the first results from a new, high resolution, $^{12}$CO(1-0), $^{13}$CO(1-0), and C$^{18}$O(1-0) molecular line survey of the Orion A cloud, hereafter referred to as the CARMA-NRO Orion Survey. CARMA observations have been combined with single-dish data from the Nobeyama 45m telescope to provide extended images at about 0.01 pc resolution, with a dynamic range of approximately 1200 in spatial scale. Here we describe the practical details of the data combination in uv space, including flux scale matching, the conversion of single dish data to visibilities, and joint deconvolution of single dish and interferometric data. A $\Delta$-variance analysis indicates that no artifacts are caused by combining data from the two instruments. Initial analysis of the data cubes, including moment maps, average spectra, channel maps, position-velocity diagrams, excitation temperature, column density, and line ratio maps provides evidence of complex and interesting structures such as filaments, bipolar outflows, shells, bubbles, and photo-eroded pillars. The implications for star formation processes are profound and follow-up scientific studies by the CARMA-NRO Orion team are now underway. We plan to make all the data products described here generally accessible; some are already available at https://dataverse.harvard.edu/dataverse/CARMA-NRO-Orion, Comment: 46 pages, 28 figures, 2 tables, accepted by ApJS

Interstellar filaments pervade molecular clouds on all scales providing a bridge between the gas with relatively low densities and the dense clumps. In this work, we characterize various physical properties of filaments in the Orion A molecular cloud using preliminary datasets from the CARMA Orion project. We use an automated filament finding algorithm, DisPerSE, on 3D datacubes, and custom characterization algorithms.

Context. This study is part of the CORE project, an IRAM/NOEMA large program consisting of observations of the millimeter continuum and molecular line emission towards 20 selected high-mass star-forming regions. The goal of the program is to search for circumstellar accretion disks, study the fragmentation process of molecular clumps, and investigate the chemical composition of the gas in these regions. Aims. We focus on IRAS 23385+6053, which is believed to be the least-evolved source of the CORE sample. This object is characterized by a compact molecular clump that is IR-dark shortward of 24 μm and is surrounded by a stellar cluster detected in the near-IR. Our aim is to study the structure and velocity field of the clump. Methods. Observations were performed at ~1.4 mm and employed three configurations of NOEMA and additional single-dish maps, merged with the interferometric data to recover the extended emission. Our correlator setup covered a number of lines from well-known hot core tracers and a few outflow tracers. The angular (~0′′.45–0′′.9) and spectral (0.5 km s−1) resolutions were sufficient to resolve the clump in IRAS 23385+6053 and investigate the existence of large-scale motions due to rotation, infall, or expansion. Results. We find that the clump splits into six distinct cores when observed at sub-arcsecond resolution. These are identified through their 1.4 mm continuum and molecular line emission. We produce maps of the velocity, line width, and rotational temperature from the methanol and methyl cyanide lines, which allow us to investigate the cores and reveal a velocity and temperature gradient in the most massive core. We also find evidence of a bipolar outflow, possibly powered by a low-mass star. Conclusions. We present the tentative detection of a circumstellar self-gravitating disk lying in the most massive core and powering a large-scale outflow previously known in the literature. In our scenario, the star powering the flow is responsible for most of the luminosity of IRAS 23385+6053 (~3000 L⊙). The other cores, albeit with masses below the corresponding virial masses, appear to be accreting material from their molecular surroundings and are possibly collapsing or on the verge of collapse. We conclude that we are observing a sample of star-forming cores that is bound to turn into a cluster of massive stars.

Argonium has recently been detected as a ubiquitous molecule in our Galaxy. Model calculations indicate that its abundance peaks at molecular fractions in the range of 1E-4 to 1E-3 and that the observed column densities require high values of the cosmic ray ionization rate. Therefore, this molecular cation may serve as an excellent tracer of the very diffuse interstellar medium (ISM), as well as an indicator of the cosmic ray ionization rate. We attempted to detect ArH+ in extragalactic sources to evaluate its diagnostic power as a tracer of the almost purely atomic ISM in distant galaxies. We obtained ALMA observations of a foreground galaxy at z = 0.89 in the direction of the lensed blazar PKS 1830-211. Two isotopologs of argonium, 36ArH+ and 38ArH+, were detected in absorption along two different lines of sight toward PKS 1830-211, known as the SW and NE images of the background blazar. The argonium absorption is clearly enhanced on the more diffuse line of sight (NE) compared to other molecular species. The isotopic ratio 36Ar/38Ar is 3.46 +- 0.16 toward the SW image, i.e., significantly lower than the solar value of 5.5. Our results demonstrate the suitability of argonium as a tracer of the almost purely atomic, diffuse ISM in high-redshift sources. The evolution of the isotopic ratio with redshift may help to constrain nucleosynthetic scenarios in the early Universe., Astronomy and Astrophysics, accepted; 5 pages, 3 figures, 1 table

We present synthetic continuum and $^{13}$CO and C$^{18}$O line emission observations of dense and cold filaments. The filaments are dynamically evolved using 3D-MHD simulations that include one of the largest on-the-fly chemical networks used to date, which models the detailed evolution of H$_2$ and CO. We investigate the reliability of observable properties, in particular filament mass and width, under different simulation conditions like magnetic field orientation and cosmic ray ionisation rate. We find that filament widths of $\sim$0.1 pc can be probed with both line and continuum emission observations with a high accuracy (deviations $\leq$ 20%). However, the width of more narrow filaments can be significantly overestimated by up to a factor of a few. Masses obtained via the dust emission are accurate within a few percent whereas the masses inferred from molecular line emission observations deviate from the actual mass by up to a factor of 10 and show large differences for different $J$ transitions. The inaccurate estimate of filament masses and widths of narrow filaments using molecular line observations can be attributed to (i) the non-isothermal state of the filaments, (ii) optical depth effects, and (iii) the subthermally excited state of CO, while inclination effects and opacity correction only influence the obtained masses and widths by less than 50%. Both, mass and width estimates, can be improved by using two isotopes to correct for the optical depth. Since gas and dust temperature generally differ (by up to 25 K), the filaments appear more gravitationally unstable if the (too low) dust temperature is used for the stability analysis., Comment: 18 pages, 14 figures, accepted by MNRAS, updated to final version